The degradation of partially hydrolyzed polyacrylamide(HPAM) found in alkaline/surfactant/polymer flooding sewage was investigated using Fenton-type reagents. Different Fenton reagent treatments for HPAM degradation w...The degradation of partially hydrolyzed polyacrylamide(HPAM) found in alkaline/surfactant/polymer flooding sewage was investigated using Fenton-type reagents. Different Fenton reagent treatments for HPAM degradation were compared. The effects of pH, hydrogen peroxide(H_(2)O_(2)), ferrous ion(Fe^(2+)), and tartaric ion(C_(4)H_(4)O_(6)^(2-)) concentrations were studied. The degradation reaction occurred within a wide range of pH(3–9). The HPAM degradation performance of photo-Fenton processes using solar light and UV were compared with that of the Fenton process. The degradation rate was found to be strongly dependent on the H_(2)O_(2)/Fe^(2+)/C_(4)H_(4)O_(6)^(2-)molar ratio. The HPAM degradation efficiency was 90%, and the chemical oxygen demand removal efficiency was 85%. HPAM could be degraded into a compound with a lower molecular weight, but it was difficult to achieve complete mineralization to CO_(2). The presence of intermediate products hindered further oxidation in the Fenton process.展开更多
The effect of salt solutions(NaCl,Na2SO4 and CaCl2) on the conformational properties of partially hydrolyzed polyacrylamide(HPAM) was investigated by using static laser light scattering(SLLS).The special interaction b...The effect of salt solutions(NaCl,Na2SO4 and CaCl2) on the conformational properties of partially hydrolyzed polyacrylamide(HPAM) was investigated by using static laser light scattering(SLLS).The special interaction between CaCl2 solution and HPAM was also researched.Experimental results show that the chain structure of HPAM is interrelated with the charge density,the kind and the concentration of salt solutions.The mean-square radius of gyration(Rz) and the second virial coefficient(A2) of HPAM decrease with increasing concentration of salt solutions,and the salt effect tends towards the maximum when the concentration of salt solution is increased to some amount.展开更多
The rheological properties of salt-tolerant partially hydrolyzed polyacrylamide(HPAM)solutions with molecular of 2.5×107 g/mol at different concentrations were measured in steady-state shear flow mode by Haake Rh...The rheological properties of salt-tolerant partially hydrolyzed polyacrylamide(HPAM)solutions with molecular of 2.5×107 g/mol at different concentrations were measured in steady-state shear flow mode by Haake Rheostress 150 rheometer.Three constitutive equations(Oldroyd four constant model,Guesekus model and FENE-P model) were used for describing the apparent viscosity and first normal stress difference.The apparent viscosity of salt-tolerant HPAM solutions appears a first Newtonian zone when the shear rate is approximately lower than 0.2 s-1.At high shear rate,the HPAM solutions show shear-thinning and elasticity.The results show that the FENE-P model has the best agreement between theoretical and experimental data within the available shear rate range.The material parameters are useful for numerical analysis of polymer solution flow fields.展开更多
Polymer solutions have very important applica-tions in the enhanced oil recovery due to their unique viscoe-lastic properties increasing microscale displacement effi-ciency. In this paper, the viscoelastic properties ...Polymer solutions have very important applica-tions in the enhanced oil recovery due to their unique viscoe-lastic properties increasing microscale displacement effi-ciency. In this paper, the viscoelastic properties of partially hydrolyzed polyacrylamide (HPAM) solution have been in-vestigated. Results show that the viscoelastic properties of HPAM increase with HPAM concentration increasing, and decrease with the increase of sodium dodecyl sulfate (SDS). Meanwhile, adding NaCl can destroy the viscoelastic proper-ties.展开更多
In this paper the crosslinking reaction between partially hydrolyzed Polyacrylamide (HPAM) with ultrahigh molecular weight and chromium (Ⅲ) was investigated by atomic absorption method. The results showed that when t...In this paper the crosslinking reaction between partially hydrolyzed Polyacrylamide (HPAM) with ultrahigh molecular weight and chromium (Ⅲ) was investigated by atomic absorption method. The results showed that when the concentration of HPAM was fixed , the crosslinking density decreased with the increase of n (COO -)/ n . When the amount of Cr(Ⅲ) was fixed, the crosslinking density increased with the increase of n (COO -)/ n . When the initial pH value of HPAM/Cr(Ⅲ) system was between 4 and 8, the crosslinking density increased with the increase of pH value. The crosslinking density also increased with the increase of temperature and the increase of salinity.展开更多
基金the Northeast Petroleum University Youth Science Foundation (No. 2019QNL-35)Guiding Science and Technology Plan Project of Daqing (No. zd-2021-39)。
文摘The degradation of partially hydrolyzed polyacrylamide(HPAM) found in alkaline/surfactant/polymer flooding sewage was investigated using Fenton-type reagents. Different Fenton reagent treatments for HPAM degradation were compared. The effects of pH, hydrogen peroxide(H_(2)O_(2)), ferrous ion(Fe^(2+)), and tartaric ion(C_(4)H_(4)O_(6)^(2-)) concentrations were studied. The degradation reaction occurred within a wide range of pH(3–9). The HPAM degradation performance of photo-Fenton processes using solar light and UV were compared with that of the Fenton process. The degradation rate was found to be strongly dependent on the H_(2)O_(2)/Fe^(2+)/C_(4)H_(4)O_(6)^(2-)molar ratio. The HPAM degradation efficiency was 90%, and the chemical oxygen demand removal efficiency was 85%. HPAM could be degraded into a compound with a lower molecular weight, but it was difficult to achieve complete mineralization to CO_(2). The presence of intermediate products hindered further oxidation in the Fenton process.
基金Project(50673033) supported by the National Natural Science Foundation of China
文摘The effect of salt solutions(NaCl,Na2SO4 and CaCl2) on the conformational properties of partially hydrolyzed polyacrylamide(HPAM) was investigated by using static laser light scattering(SLLS).The special interaction between CaCl2 solution and HPAM was also researched.Experimental results show that the chain structure of HPAM is interrelated with the charge density,the kind and the concentration of salt solutions.The mean-square radius of gyration(Rz) and the second virial coefficient(A2) of HPAM decrease with increasing concentration of salt solutions,and the salt effect tends towards the maximum when the concentration of salt solution is increased to some amount.
基金Project(07JCZDJC02600) supported by the Natural Science Foundation ofTianjin,China
文摘The rheological properties of salt-tolerant partially hydrolyzed polyacrylamide(HPAM)solutions with molecular of 2.5×107 g/mol at different concentrations were measured in steady-state shear flow mode by Haake Rheostress 150 rheometer.Three constitutive equations(Oldroyd four constant model,Guesekus model and FENE-P model) were used for describing the apparent viscosity and first normal stress difference.The apparent viscosity of salt-tolerant HPAM solutions appears a first Newtonian zone when the shear rate is approximately lower than 0.2 s-1.At high shear rate,the HPAM solutions show shear-thinning and elasticity.The results show that the FENE-P model has the best agreement between theoretical and experimental data within the available shear rate range.The material parameters are useful for numerical analysis of polymer solution flow fields.
文摘Polymer solutions have very important applica-tions in the enhanced oil recovery due to their unique viscoe-lastic properties increasing microscale displacement effi-ciency. In this paper, the viscoelastic properties of partially hydrolyzed polyacrylamide (HPAM) solution have been in-vestigated. Results show that the viscoelastic properties of HPAM increase with HPAM concentration increasing, and decrease with the increase of sodium dodecyl sulfate (SDS). Meanwhile, adding NaCl can destroy the viscoelastic proper-ties.
文摘In this paper the crosslinking reaction between partially hydrolyzed Polyacrylamide (HPAM) with ultrahigh molecular weight and chromium (Ⅲ) was investigated by atomic absorption method. The results showed that when the concentration of HPAM was fixed , the crosslinking density decreased with the increase of n (COO -)/ n . When the amount of Cr(Ⅲ) was fixed, the crosslinking density increased with the increase of n (COO -)/ n . When the initial pH value of HPAM/Cr(Ⅲ) system was between 4 and 8, the crosslinking density increased with the increase of pH value. The crosslinking density also increased with the increase of temperature and the increase of salinity.
