Stochastic sampled-data multi-objective control of active suspension systems for in-wheel motor driven electric vehicles

This paper addresses the sampled-data multi-objective active suspension control problem for an in-wheel motor driven electric vehicle subject to stochastic sampling periods and asynchronous premise variables.The focus is placed on the scenario that the dynamical state of the half-vehicle active suspension system is transmitted over an in-vehicle controller area network that only permits the transmission of sampled data packets.For this purpose,a stochastic sampling mechanism is developed such that the sampling periods can randomly switch among different values with certain mathematical probabilities.Then,an asynchronous fuzzy sampled-data controller,featuring distinct premise variables from the active suspension system,is constructed to eliminate the stringent requirement that the sampled-data controller has to share the same grades of membership.Furthermore,novel criteria for both stability analysis and controller design are derived in order to guarantee that the resultant closed-loop active suspension system is stochastically stable with simultaneous𝐻2 and𝐻∞performance requirements.Finally,the effectiveness of the proposed stochastic sampled-data multi-objective control method is verified via several numerical cases studies in both time domain and frequency domain under various road disturbance profiles.

ROBUST CONTROL WITH COVARIANCE CONSTRAINT FOR UNCERTAIN SAMPLED-DATA FEEDBACK CONTROL SYSTEMS

The problem of robust controller design with covariance constraint for uncertain sampled data feedback control systems was considered in this paper. The goal of this problem is to design controllers such that the closed loop system meets the prespecified covariance constraint. This problem can be reduced to a controller design problem for an equivalent uncertain discrete time system. Sufficient conditions were given for the existence of the desired controllers. The analytical expression of the set of desired controllers was also presented. An illustrative example was given to show the applicability of the proposed design procedure.

H_∞ CONTROL FOR SAMPLED-DATA SYSTEMS

This paper presented a tutorial exposition of H ∞ sampled data control, emphasizing the H ∞ discretization which converts the H ∞ sampled data system to an equivalent finite dimensional H ∞ discrete time system. The discretization process involves two steps. First, the original problem is changed into an equivalent infinite dimensional discrete time problem by lifting techniques. Then, further simplification is taken to reduce the problem to an equivalent finite dimensional discrete problem which can be solved by the existing techniques such as state space approach or two riccati method.

DEADBEAT COVARIANCE CONTROLLER DESIGN FOR SAMPLED-DATA SYSTEMS

The problem of deadbeat covariance controller design for sampled data feedback systems is considered. The purpose of considering this problem is to design linear discrete controllers such that the state covariance of the closed loop system achieves its steady state value which is equal to a prespecified positive definite matrix during finite beats. This problem is reduced to the similar one for equivalent discrete time systems by taking intersample behaviour into account. Both the existence conditions and the explicit expression of the desired controllers are given.

CONTROL CHAOS IN TRANSITION SYSTEM USING SAMPLED-DATA FEEDBACK

The method for controlling chaotic transition system was investigated using sampled- data . The output of chaotic transition system was sampled at a given sampling rate , then the sampled output was used by a feedbacks subsystem to construct a control signal for controlling chaotic transition system to the origin . Numerical simulations are presented to show the effectiveness and feasibility of the developed controller.

Exponential synchronization of chaotic Lur'e systems with time-varying delay via sampled-data control

In this paper, we study the exponential synchronization of chaotic Lur＇e systems with time-varying delays via sampled-data control by using sector nonlinearties. In order to make full use of information about sampling intervals and interval time-varying delays, new Lyapunov-Krasovskii functionals with triple integral terms are introduced. Based on the convex combination technique, two kinds of synchronization criteria are derived in terms of linear matrix inequal- ities, which can be efficiently solved via standard numerical software. Finally, three numerical examples are provided to demonstrate the less conservatism and effectiveness of the proposed results.

Sampled-data modeling and dynamical effect of output-capacitor time-constant for valley voltage-mode controlled buck-boost converter

By analyzing the output voltage ripple of a buck-boost converter with large equivalent series resistance（ESR） of output capacitor, one valley voltage-mode controller for buck-boost converter is proposed. Considering the fact that the increasing and decreasing slopes of the inductor current are assumed to be constant during each switching cycle, an especial sampleddata model of valley voltage-mode controlled buck-boost converter is established. Based on this model, the dynamical effect of an output-capacitor time-constant on the valley voltage-mode controlled buck-boost converter is revealed and analyzed via the bifurcation diagrams, the movements of eigenvalues, the Lyapunov exponent spectra, the boundary equations,and the operating-state regions. It is found that with gradual reduction of output-capacitor time-constant, the buck-boost converter in continuous conduction mode（CCM） shows the evolutive dynamic behavior from period-1 to period-2, period-4, period-8, chaos, and invalid state. The stability boundary and the invalidated boundary are derived theoretically by stability analysis, where the stable state of valley voltage-mode controlled buck-boost converter can enter into an unstable state, and the converter can shift from the operation region to a forbidden region. These results verified by time-domain waveforms and phase portraits of both simulation and experiment indicate that the sampled-data model is correct and the time constant of the output capacitor is a critical factor for valley voltage-mode controlled buck-boost converter, which has a significant effect on the dynamics as well as control stability.

FLOATING QUANTIZATION EFFECTS ON MULTIRATE SAMPLED-DATA NONLINEAR CONTROL SYSTEMS

In this article, floating quantization effects on multirate sampled-data control systems are studied. It shows that the solutions of multirate digital feedback control systems with nonlinear plant and with floating quantization in the controller are uniformly ultimately bounded if the associated linear systems consisting of linearization of the plant and controller with no quantization are Schur stable. Moreover, it also shows that the difference between the response of multirate digital controllers without quantizers and the same plant with floating quantization in the controllers can be made as small as desired by selecting proper quantization level.

Sampled-data synchronization of coupled harmonic oscillators with controller failure and communication delays

In this letter, a distributed protocol for sampled-data synchronization of coupled harmonic oscillators with controller failure and communication delays is proposed, and a brief procedure of convergence analysis for such algorithm over undirected connected graphs is provided. Furthermore, a simple yet generic criterion is also presented to guarantee synchronized oscillatory motions in coupled harmonic oscillators. Subsequently, the simulation results are worked out to demonstrate the efficiency and feasibility of the theoretical results.

Stochastic asymptotical synchronization of chaotic Markovian jumping fuzzy cellular neural networks with mixed delays and the Wiener process based on sampled-data control

We investigate the stochastic asymptotical synchronization of chaotic Markovian jumping fuzzy cellular neural networks （MJFCNNs） with discrete, unbounded distributed delays, and the Wiener process based on sampled-data control using the linear matrix inequality （LMI） approach. The Lyapunov–Krasovskii functional combined with the input delay approach as well as the free-weighting matrix approach is employed to derive several sufficient criteria in terms of LMIs to ensure that the delayed MJFCNNs with the Wiener process is stochastic asymptotical synchronous. Restrictions （e.g., time derivative is smaller than one） are removed to obtain a proposed sampled-data controller. Finally, a numerical example is provided to demonstrate the reliability of the derived results.

Free-matrix-based time-dependent discontinuous Lyapunov functional for synchronization of delayed neural networks with sampled-data control

This paper is concerned with the synchronization of delayed neural networks via sampled-data control. A new technique, namely, the free-matrix-based time-dependent discontinuous Lyapunov functional approach, is adopted in constructing the Lyapunov functional, which takes advantage of the sampling characteristic of sawtooth input delay. Based on this discontinuous Lyapunov functional, some less conservative synchronization criteria are established to ensure that the slave system is synchronous with the master system. The desired sampled-data controller can be obtained through the use of the linear matrix inequality（LMI） technique. Finally, two numerical examples are provided to demonstrate the effectiveness and the improvements of the proposed methods.

Fault tolerant synchronization of chaotic systems based on T-S fuzzy model with fuzzy sampled-data controller

In this paper the fault tolerant synchronization of two chaotic systems based on fuzzy model and sample data is investigated. The problem of fault tolerant synchronization is formulated to study the global asymptotical stability of the error system with the fuzzy sampled-data controller which contains a state feedback controller and a fault compensator. The synchronization can be achieved no matter whether the fault occurs or not. To investigate the stability of the error system and facilitate the design of the fuzzy sampled-data controller, a Takagi Sugeno （T-S） fuzzy model is employed to represent the chaotic system dynamics. To acquire good performance and produce a less conservative analysis result, a new parameter-dependent Lyapunov-Krasovksii functional and a relaxed stabilization technique are considered. The stability conditions based on linear matrix inequality are obtained to achieve the fault tolerant synchronization of the chaotic systems. Finally, a numerical simulation is shown to verify the results.

Robust H_∞ controller design for sampled-data systems with parametric uncertainties

This article investigates the problem of robust H∞ controller design for sampled-data systems with time-varying norm-bounded parameter uncertainties in the state matrices. Attention is focused on the design of a causal sampled-data controller, which guarantees the asymptotical stability of the closed-loop system and reduces the effect of the disturbance input on the controlled output to a prescribed H∞ performance bound for all admissible uncertainties. Sufficient condition for the solvability of the problem is established in terms of linear matrix inequalities （LMIs）. It is shown that the desired H∞ controller can be constructed by solving certain LMIs. An illustrative example is given to demonstrate the effectiveness of the proposed method.

Overview of multirate sampled-data control system

The basic analysis and synthesis approaches for multirate sampled-data control system are reviewed. After giving the definition and some properties of multirate system are given, its origination, development and design methods are discussed in detail. Finally, some remarks, expectations and conclusions on the present research status and the research directions are given.

Ranked-Set Sampling Based Distribution Free Control Chart with Application in CSTR Process

Nonparametric(distribution-free)control charts have been introduced in recent years when quality characteristics do not follow a specific distribution.When the sample selection is prohibitively expensive,we prefer ranked-set sampling over simple random sampling because ranked set sampling-based control charts outperform simple random sampling-based control charts.In this study,we proposed a nonparametric homogeneously weighted moving average based on theWilcoxon signed-rank test with ranked set sampling(NPHWMARSS)control chart for detecting shifts in the process location of a continuous and symmetric distribution.Monte Carlo simulations are used to obtain the run length characteristics to evaluate the performance of the proposed NPHWMARSS control chart.The proposed NPHWMARSS control chart’s performance is compared to that of parametric and nonparametric control charts.These control charts include the exponentially weighted moving average(EWMA)control chart,Wilcoxon signed-rank with simple random sampling based the nonparametric EWMA control chart,the nonparametric EWMA sign control chart,Wilcoxon signed-rank with ranked set sampling-based the nonparametric EWMA control chart,and the homogeneously weighted moving average control charts.The findings show that the proposed NPHWMARSS control chart performs better than its competitors,particularly for the small shifts.Finally,an example is presented to demonstrate how the proposed scheme can be implemented practically.

Virtual sample generation for model-based prognostics and health management of on-board high-speed train control system

In view of class imbalance in data-driven modeling for Prognostics and Health Management(PHM),existing classification methods may fail in generating effective fault prediction models for the on-board high-speed train control equipment.A virtual sample generation solution based on Generative Adversarial Network(GAN)is proposed to overcome this shortcoming.Aiming at augmenting the sample classes with the imbalanced data problem,the GAN-based virtual sample generation strategy is embedded into the establishment of fault prediction models.Under the PHM framework of the on-board train control system,the virtual sample generation principle and the detailed procedures are presented.With the enhanced class-balancing mechanism and the designed sample augmentation logic,the PHM scheme of the on-board train control equipment has powerful data condition adaptability and can effectively predict the fault probability and life cycle status.Practical data from a specific type of on-board train control system is employed for the validation of the presented solution.The comparative results indicate that GAN-based sample augmentation is capable of achieving a desirable sample balancing level and enhancing the performance of correspondingly derived fault prediction models for the Condition-based Maintenance(CBM)operations.

Inductor Current Sampled Feedback Control of Chaos in Current-Mode Boost Converter

A chaos control strategy for chaotic current-mode boost converter is presented by using inductor current sampled feedback control technique.The quantitative analysis of control mechanism is performed by establishing a discrete alterative map of the controlled system.The stability criterion,feedback gain,and corresponding critical duty ratio are obtained from the eigenvalue of the map.The simulation results verify the t heoretical analysis results of the control strategy.

H_∞ Design for Sampled-Data Systems via Lifting Technique: Conditions and Limitation

The initial motivation of the lifting technique is to solve the H∞control problems. However, the conventional weighted H∞design does not meet the conditions required by lifting, so the result often leads to a misjudgement of the design. Two conditions required by using the lifting technique are presented based on the basic formulae of the lifting. It is pointed out that only the H∞disturbance attenuation problem with no weighting functions can meet these conditions, hence, the application of the lifting technique is quite limited.

Mosquito Control, Killing off the Females

In addition to causing discomfort, female mosquitoes introduce disease-carrying viruses and bacteria into the bloodstream of their victims. There are numerous publications describing the uses of sugary mosquito baits with promising results. Without temperature control measures however, these methods are mainly useful for only nectar-feeding insects, including male mosquitoes, because the warmth of the blood is a condition for the females to locate their meals. The efforts required to keep the baits fresh against the natural spoiling process make them less attractive or impractical to implement. These experiments address these issues by using warm baits of water, sugar, boric acid, and antibiotics. Overnight, the general areas became clear of blood-sucking female mosquitoes while in numbers, the harmless males concentrated into the immediate vicinities. Control vs. experiment protocol established no other logical explanation for this phenomenon other than that females were attracted and killed by the bait. As expected, there was no female mosquito’s activity in these areas. There weren’t many left to do the work.

Robust Pole Assignment of Digital Control System with Output Multirate Sampled

Multirate digital control system is a periodically time-variant (PTV) system in its essence. It bas many' super capability', such as obtaining arbitrarily-large gain- margin, simultaneous stabilization, strong stabilization, decentralized control, etc. Utilizing freedom aroused from the multirate sampling of system output, this paper assigns poles of the closedloop system robustly, and so improves the resistance of the system to perturbation.