Hydrological assessment of TRMM rainfall data over Yangtze River Basin

High-quality rainfall information is critical for accurate simulation of runoff and water cycle processes on the land surface. In situ monitoring of rainfall has a very limited utility at the regional and global scale because of the high temporal and spatial variability of rainfall. As a step toward overcoming this problem, microwave remote sensing observations can be used to retrieve the temporal and spatial rainfall coverage because of their global availability and frequency of measurement. This paper addresses the question of whether remote sensing rainfall estimates over a catchment can be used for water balance computations in the distributed hydrological model. The TRMM 3B42V6 rainfall product was introduced into the hydrological cycle simulation of the Yangtze River Basin in South China. A tool was developed to interpolate the rain gauge observations at the same temporal and spatial resolution as the TRMM data and then evaluate the precision of TRMM 3B42V6 data from 1998 to 2006. It shows that the TRMM 3B42V6 rainfall product was reliable and had good precision in application to the Yangtze River Basin. The TRMM 3B42V6 data slightly overestimated rainfall during the wet season and underestimated rainfall during the dry season in the Yangtze River Basin. Results suggest that the TRMM 3B42V6 rainfall product can be used as an alternative data source for large-scale distributed hydrological models.

Validation of the Satellite-Derived Rainfall Estimates over the Tibet

Measuring rainfall from space appears to be the only cost effective and viable means in estimating regional precipitation over the Tibet, and the satellite rainfall products are essential to hydrological and agricultural modeling. A long-standing problem in the meteorological and hydrological studies is that there is only a sparse raingauge network representing the spatial distribution of precipitation and its quantity on small scales over the Tibet. Therefore, satellite derived quantitative precipitation estimates are extremely usefill for obtaining rainfall patterns that can be used by hydrological models to produce forecasts of river discharge and to delineate the flood hazard area. In this paper, validation of the US National Oceanic and Atmospheric Administration （NOAA） Climate Prediction Center （CPC） RFE （rainfall estimate） 2.0 data was made by using daily rainfall observations at 11 weather stations over different climate zones from southeast to northwest of the Tibet during the rainy season from 1 June to 30 September 2005 and 2006. Analysis on the time series of daily rainfall of RFE-CPC and observed data in different climate zones reveals that the mean correlation coefficients between satellite estimated and observed rainfall is 0.74. Only at Pali and Nielamu stations located in the southern brink of the Tibet along the Himalayan Mountains, are the correlation coefficients less than 0.62. In addition, continuous validations show that the RFE performed well in different climate zones, with considerably low mean error （ME） and root mean square error （RMSE） scores except at Nielamu station along the Himalayan range. Likewise, for the dichotomous validation, at most stations over the Tibet, the probability of detection （POD） values is above 73% while the false alarm rate （FAR） is between 1% and 12%. Overall, NOAA CPC RFE 2.0 products performed well in the estimation and monitoring of rainfall over the Tibet and can be used to analyze the precipitation pattern, produce discharge forecast, and delineate the flood hazard area.

A FUSING TECHNIQUE WITH SATELLITE PRECIPITATION ESTIMATE AND RAINGAUGE DATA

Satellite rainfall estimate can provide rainfall information over large areas,and raingauge can provide point-based ground observations with high accuracy.With the combination of satellite and raingauge data together,the estimated rainfall fields are greatly improved.This combination method,called 'fusing technique',is discussed in this paper,and the validation for this technique is accomplished with HUBEX IOP data.