Research on a TOPSIS energy efficiency evaluation system for crude oil gathering and transportation systems based on a GA-BP neural network

As the main link of ground engineering,crude oil gathering and transportation systems require huge energy consumption and complex structures.It is necessary to establish an energy efficiency evaluation system for crude oil gathering and transportation systems and identify the energy efficiency gaps.In this paper,the energy efficiency evaluation system of the crude oil gathering and transportation system in an oilfield in western China is established.Combined with the big data analysis method,the GA-BP neural network is used to establish the energy efficiency index prediction model for crude oil gathering and transportation systems.The comprehensive energy consumption,gas consumption,power consumption,energy utilization rate,heat utilization rate,and power utilization rate of crude oil gathering and transportation systems are predicted.Considering the efficiency and unit consumption index of the crude oil gathering and transportation system,the energy efficiency evaluation system of the crude oil gathering and transportation system is established based on a game theory combined weighting method and TOPSIS evaluation method,and the subjective weight is determined by the triangular fuzzy analytic hierarchy process.The entropy weight method determines the objective weight,and the combined weight of game theory combines subjectivity with objectivity to comprehensively evaluate the comprehensive energy efficiency of crude oil gathering and transportation systems and their subsystems.Finally,the weak links in energy utilization are identified,and energy conservation and consumption reduction are improved.The above research provides technical support for the green,efficient and intelligent development of crude oil gathering and transportation systems.

The Efficiency of the Energy Saving Stoves in Amboseli Ecosystem-Analysis of Time, Energy and Carbon Emissions Savings

It is estimated that more than 2.5 billion people worldwide use biomass for cooking. Burning biomass is one of the major contributors to carbon dioxide (CO2) emission—a principle gas in global warming and climate change. One way of cutting down the CO2 emissions is adaptation of efficient and clean energy technologies. This study examined the efficiency of the energy saving stoves in Amboseli ecosystem by comparing the cooking time, energy use, wood fuel and carbon emissions to the traditional three stone open fire set ups. The result indicates a statistical difference in the time spent cooking on energy stoves and three stone open fire (t = 5.3055;n = 60;p = 0.00117). Energy saving stoves saved 12.7% - 33.3% of wood fuel compared to the traditional three stones set ups. Water boiling tests to determine the energy savings, revealed that energy saving stoves saved between 25.74% and 26.16% energy/joule per session in-house and outdoor settings respectively. Based on the two meals prepared per day by each household, the total Carbon Emission Savings for the 1000 local beneficiaries of energy saving stoves varied from 102,200 kg CO2 (indoor cooking) to 357,700 kg CO2 (outdoor cooking) per year. It is therefore concluded that energy saving stoves saves time, fuel wood and energy, and reduces carbon emissions. The study findings refute the claims that open fire when carefully operated can be fuel efficient and clean burning to rival energy saving stoves. To improve the performance of the energy saving stoves, it is recommended that a design modification be done to include a chimney to emit excess smoke during indoor cooking;and the stove should be fixed to the floor with mortar to minimise heat loss and breakages.

Experimental study and energy saving analysis of a novel radiant ceiling heating system

In order to have an in-depth understanding of the metal ceiling radiant panel with capillary tubes, a radiant ceiling heating system is constructed to study the actual heating performance and thermal comfort by experiments. In addition, the energy saving potential of the novel heating system is discussed in terms of the COP （coefficient of performance） of the ground source heat pump and the exergy efficiency of the radiant terminal. The results indicate that the heating system shows high thermal stability and thermal comfort. When the system reaches a stable condition, the radiant heat transfer accounts for 62.7% of the total heat transfer, and the total heat transfer can meet the heating demands of most buildings. Compared to a radiant floor heating system, it offers advantages in a shorter preheating time, a lower supply water temperature and a stronger heating capability. The COP of the ground source heat pump is increased greatly when the supply water temperature is 28 to 33 ℃, and the exergy efficiency of the metal ceiling with capillary tubes is 1.6 times that of the radiant floor when the reference temperature is 5 ℃ The novel radiant ceiling heating system shows a tremendous energy saving potential.

Energy Saving and Power Factor Correction for Industrial Plants in Hebron District

Energy efficiency can be improved by reducing the amount of energy that we demand, and by changing our behaviors to reduce the amount of energy that we waste. This scheme manipulates the problem of incremental demand, and low Power Factor （PF） for industrial plants, starting with walk through surveys, data analysis, providing advices to insure personnel involvement, and suggestions of practical circuits to attain the target. Elements of effective energy management program can be configured of management commitment, audit, analysis and implementation. Energy management opportunities can he operational and maintenance strategies, retrofit or modification strategies and new design strategies. The new technique of Power Factor Correction （PFC） that has been designed was the High Active Boost Power Factor Correction Pre-regulator Circuit, which was resulted in single / three phase PFC of about unity, in hand with a regulated output single phase voltage of about 220 VAC.

An Approach to Energy Saving and Cost of Energy Reduction Using an Improved Efficient Technology

The electricity consumption in commercial places like universities has tremendously increased recently. Modern and advanced energy efficient appliances are highly needed to substitute the conventional ones. Energy saving is of great important instead of its wastage, as utilizing the energy efficiently reduces the cost of energy. Energy consumption varies for commercial building due to several factors such as electrical appliance usage, electrical appliance type, management, etc. Due to the advancement in technology, there are new emergence appliances that are of high efficiency and have less energy consumption. A case study is conducted on selected five tutorial rooms, level 4 buildings in the Faculty of Electrical Engineering 19 A, Universiti Teknologi Malaysia. The paper proposes new emergence equipments with high efficiency and less power consumption to replace the existing ones. A survey is conducted on the number of electrical appliances used for each of the tutorial rooms, time table for each tutorial room and the Tenaga Nasional Berhad pricing and tariff are taken into consideration in the analysis of the energy consumption and the cost of energy. This paper aims at reducing the amount of energy consumption by replacing the existing electrical equipments with high efficient electrical equipments;it also tends to reduce the cost of energy paid to the utility. By observing the results, it shows that the proposed efficient electrical equipments are more efficient, less power consumption and less cost compared to the existing electrical equipments.

Summary of Steam System Optimization and Energy Saving and Carbon Reduction Practice in Yanshan Petrochemical Company

This paper analyzes the main problems of Sinopec Beijing Yanshan Petrochemical Co.,Ltd.,such as decentralized steam system layout,many types of fuels,obvious increase in fuel cost,low operation efficiency of turbine and boiler and high self consumption loss,and puts forward and implements optimization and improvement measures such as pressure raising transformation of natural gas system,adjustment of energy consumption structure,reduction of energy consumption cost,improvement of steam production quality and equipment efficiency.The results showed that compared with the fuel consumption in 2018,the consumption of coal coke was reduced by 550000 t,the consumption of natural gas was increased by 170000 t,and the total consumption of fuel gas and fuel oil was increased by 50000 t,equivalent to 246000 t of standard coal;the purchased electricity was increased by about 5×10^(8) kW·h.Green power trading and 14.76 MW distributed photovoltaic projects were carried out.According to the calculation of 1400-1600 h annual power generation in class II photovoltaic areas and the emission factor of North China regional power grid baseline,the annual emission reduction was about 55000 t CO_(2) in 2021.After the above transformation,the goal of zero-coking is achieved;the steam consumption of units is reduced by 21.5%,the steam production of boilers is reduced by 24.9%,and the annual emission reduction is about 760000 t CO_(2),which has achieved good results.

Evaluation of Energy-Efficiency Standards for Room Air Conditioners in the US

This article describes an analysis of the energy and economic impacts of possible energy efficiency standards for room air conditioners on both U.S. consumers and the nation as a whole. We used two metrics to determine the effect of standards on a representative sample of U.S. consumers: life-cycle cost change and payback period. For the national impact analysis, we evaluated national energy savings attributable to each potential standard, the monetary value of the energy savings to consumers of room air conditioners, the increased total installed costs because of standards, and the net present value of the difference between the value of energy savings and increased total installed costs. Our analysis indicates that standards for room air conditioners at efficiency level 3, which is 17% more efficient than today’s typical unit in the case of room air conditioners less than 6000 Btu/h with louvers and 12% more efficient in the case of room air conditioners 8000 - 13,999 Btu/h with louvers, would save close to one quad of energy over 30 years and have a net present value of consumer benefit of between ?$0.14 billion and $1.82 billion, depending on the discount rate. In addition, such standards would reduce carbon dioxide emissions and NOx emissions.

Design and Development of a New Control System for Improving Energy Efficiency and Demand Response

One of the best strategies for improving energy efficiency in any system is using the energy resources in the facilities properly.Using energy systems only when they are absolutely necessary is one of the best cost-benefit ratio strategies,i.e.the best energy saving strategy is,not using it.The aim of this paper resides on introducing a new Energy Management and Control System(EMCS),developed by the authors,which has been installed at the Universitat Politècnica de València.Alongside the paper,the architecture,the components and the installation cost analysis of the EMCS,as well as management actions implemented in the university and the obtained results are presented.Furthermore,this innovative system has been designed to improve demand response in energy systems by providing consumers with a tool for responding actively to energy demands,and also to provide all the different electrical market agents with a communication and business platform for exchanging information.

Enabling Energy Efficiency in 5G Network

The mobile Internet and Internet of Things are considered the main driving forc⁃es of 5G,as they require an ultra-dense deployment of small base stations to meet the in⁃creasing traffic demands.5G new radio(NR)access is designed to enable denser network deployments,while leading to a significant concern about the network energy consump⁃tion.Energy consumption is a main part of network operational expense(OPEX),and base stations work as the main energy consumption equipment in the radio access network(RAN).In order to achieve RAN energy efficiency(EE),switching off cells is a strategy to reduce the energy consumption of networks during off-peak conditions.This paper intro⁃duces NR cell switching on/off schemes in 3GPP to achieve energy efficiency in 5G RAN,including intra-system energy saving(ES)scheme and inter-system ES scheme.Addition⁃ally,NR architectural features including central unit/distributed unit(CU/DU)split and dual connectivity(DC)are also considered in NR energy saving.How to apply artificial in⁃telligence(AI)into 5G networks is a new topic in 3GPP,and we also propose a machine learning(ML)based scheme to save energy by switching off the cell selected relying on the load prediction.According to the experiment results in the real wireless environment,the ML based ES scheme can reduce more power consumption than the conventional ES scheme without load prediction.

Technologies for Efficient Use of Irrigation Water and Energy in China

While the shortage of water and energy is a well-recognized worldwide natural resources issue, little attention has been given to irrigation energy efficiency. In this paper, we examine the potential energy savings that can be achieved by implementing improved irrigation technologies in China. The use of improved irrigation management measures such as a flow meter, irrigation scheduling, and/or regular maintenance and upgrades, typically reduces the amount of water pumped over the course of a growing season. The total energy saved by applying these improved measures could reach 20%, as compared with traditional irrigation methods. Two methods of irrigation water conveyance by traditional earth canal and low pressure pipeline irrigation （LPPI） were also evaluated. Our study indicated that LPPI could save 6.48x 109 kWh yr1 when applied to 11 Chinese provinces. Also, the COz emission was reduced by 6.72 metric tons per year. Among these 11 surveyed provinces, the energy saving potential for two provinces, Hebei and Shandong, could reach 1.45 x 109 kWh yr^-1. Using LPPI, potential energy saved and CO2 emissions reduced in the other 20 Chinese provinces were estimated at about 2.97×109 kWh yr-1 and 2.69 metric tons per year, respectively. The energy saving potential for Heilongjiang, a major agriculture province, could reach 1.77× 109 kWh yr-1, which is the largest in all provinces. If LPPI is applied to the entire country, average annual energy saving of more than 9 billion kWh and average annual CO2 emission reduction of more than 9.0 metric tons could be realized. Rice is one of the largest users of the world＇s fresh water resources. Compared with continuous flooding irrigation, intermittent irrigation （ITI） can improve yield and water-use efficiency in paddy fields. The total increments of net output energy and yield by ITI in paddy fields across China could reach 2.5× 1016 calories and l07 tons, respectively. So far only a small part of agricultural land in China has adopted water and energy saving technologies. Therefore, potential water and energy savings in China by adapting improved irrigation technology could be significant and should be carefully studied and applied.

Sensitivity Analysis of Energy Consumption for Cylinder Efficiency of A 1 000 MW Steam Turbine Unit

以东汽1000MW汽轮机为研究对象，采用汽轮机组定功率变工况计算方法，对汽轮机各汽缸效率在THA、70％THA、50％THA、40％THA滑压工况进行敏度分析，得到相应工况下各汽缸效率变化对汽轮机热耗率和机组发、供电煤耗率的影响规律。分析表明，缸效率的能耗敏度随缸效率变化基本呈线性关系；低压缸效率的能耗敏度最大，高压缸效率次之，中压缸效率较小；随机组负荷降低，高压缸效率的能耗敏度增加，中、低压缸效率的能耗敏度变化较小。在THA工况下低压缸效率下降1％，供电煤耗敏度绝对值增加1．246g／（kW·h），相对值升高0．433％；高压缸效率下降1％，供电煤耗敏度的绝对值增加0．44g／（kW．h），相对值升高0．154％；中压缸效率下降1％，供电煤耗敏度的绝对值增加0．352g／（kW．h），相对值升高0．122％。分析结果可对同类型机组进行节能诊断，进而指导机组的优化运行。

Simulation of District Cooling Plant and Efficient Energy Air Cooled Condensers (Part I)

In hot arid countries with severe weather, the summer air conditioning systems consume much electrical power at peak period. Shifting the loads peak to off-peak period with thermal storage is recommended. Model A of residential buildings and Model B of schools and hospitals were used to estimate the daily cooling load profile in Makkah, Saudi Arabia at latitude of 21.42°N and longitude of 39.83°E. Model A was constructed from common materials, but Model B as Model A with 5 - 8 cm thermal insulation and double layers glass windows. The average data of Makkah weather through 2010, 2011 and 2012 were used to calculate the cooling load profile and performance of air conditioning systems. The maximum cooling load was calculated at 15:00 o’clock for a main floor building to a 40-floor of residential building and to 5 floors of schools. A district cooling plant of 180,000 Refrigeration Ton was suggested to serve the Gabal Al Sharashf area in the central zone of Makkah. A thermal storage system to store the excess cooling capacity was used. Air cooled condensers were used in the analysis of chiller refrigeration cycle. The operating cost was mainly a function of electrical energy consumption. Fixed electricity tariff was 0.04 $/kWh for electromechanical counter, and 0.027, 0.04, 0.069 $/kWh for shifting loads peak for the smart digital counter. The results showed that the daily savings in consumed power are 8.27% in spring, 6.86% in summer, 8.81% in autumn, and 14.55% in winter. Also, the daily savings in electricity bills are 12.26% in spring, 16.66% in summer, 12.84% in autumn, and 14.55% in winter. The obtained maximum saving in consumed power is 14.5% and the daily saving in electricity bills is 43% in summer when the loads peak is completely shifted to off-peak period.

Improving the Energy Efficiency of Cyclone Dust Collectors for Wood Product Factories

Dust collection systems represent a significant portion of a wood product manufacturer’s total electricity use. The system fan works against the static pressure of the entire system—the blast gates, the ductwork, and the upstream or downstream cyclone and/or baghouse. A poor system design (e.g., sharp elbows or undersized ductwork) increases the total amount of static pressure in the system, the fan’s performance curve shifts, increasing the total brake horsepower required by the fan (up to the maximum point on the curve). Additionally, system designers may oversize a dust collection system to ensure adequate dust capture and transport, either to accommodate system expansion or simply to be conservative. Since theoretical fan energy use increases with its velocity cubed, this can be an expensive safety net. This paper presents a comprehensive literature review about industrial cyclone dust collectors energy saving in relation to management, technologies, and policies. Energy-saving technologies like high-efficiency motors (HEMs), variable-speed drives (VSDs), leak detection, and pressure drop reduction have all been examined. Based on energy saving technologies results, it has been found that in the industrial sectors, a sizeable amount of electric energy, and utility bill can be saved using these technologies. Finally, various energy-saving policies were reviewed.

The Quantification and Reporting of Negawatt-Hours with Flexible Energy Conservation Measure Verification Software (ECM-Tool)

In order to promote digital innovations in the field of energy use and monitoring in all end customer sectors, the Federal Ministry for Economic Affairs and Energy (BMWi) has launched the “Pilotprogramm Einsparzähler” in 2016. The program promotes the development of digital platforms following the “Efficiency First” principle, focusing not on individual projects but on the establishment of a business model. smartB successfully applied for subsidies for the development of a software tool, the architecture of which is the content of this open source paper. The tool applies a multivariate regression-model to model a given system’s energy consumption (significant energy uses or SEUs), adjusted to relevant external factors (e.g. weather) and given output levels or product properties. Thereby comparing energy consumption before and after an energy conservation measure (ECM), the tool allows for a quantification and verification of achieved energy savings as laid out in international standards for energy management (ISO, 2014). Achieved energy savings induced by an ECM and energy efficiency improvements cannot be measured directly. We use the term “negawatt-hour”, defined as a unit of energy saved as a direct result of energy conservation measures. International norms provide accepted standards to derive quantified savings in negawatt-hours from a qualified comparison between consumption before and after an ECM, as presented at the beginning of the paper.

PHOENIX’S FIRST NET-ZERO ENERGY OFFICE RETROFIT: A GREEN AND LEAN CASE STUDY

Many in the construction industry view lean practices as a means for reducing cost and schedule while maintaining or improving quality. This paper argues that lean practices can also be used to promote energy savings throughout a building’s life cycle. This paper presents a case study of an existing building retrofit in Phoenix, Arizona. The project owner, a general contractor, self-performed much of the building construction and worked to ensure the project team aligned around the project’s net-zero energy goal. All building systems, excepting the walls and roof, were re-designed and re-constructed. After retrofit, the building has achieved net-zero energy consumption;that is, the building produces as much energy as it consumes on an annual basis. Deep building energy retrofits typically result in larger energy savings than operational changes alone can provide, as these retrofits take a whole-building approach to design (i.e., optimize the whole) and implement integrated project delivery methods (e.g., (AIA, 2007)). This paper discusses a net-zero energy retrofit and how lessons learned on this project could apply to other deep energy retrofits for commercial buildings (where “deep” refers to energy savings of 25% or more) that may significantly improve building value (Miller and Pogue, 2009). The inefficiency of existing building stock supports the need for retrofitting: energy consumption in the existing building stock in the United States accounts for approximately 41% of the total primary energy consumption (US DOE, 2012). In order to reduce this consumption, existing buildings must be retrofit, through replacement or upgrade of their existing building systems, to improve their energy performance. Beyond the energy motivation, a building’s operating costs account for the largest portion of the life cycle cost. Thus, deep energy retrofit projects offer an opportunity to significantly reduce both national energy consumption and expenditures. While much research exists on the topic of energy retrofits, very little explores the role of the contractor. This paper explores the contractor’s role (rather than the designer’s or engineer’s role) in delivering deep energy retrofit projects. The contractor plays a critical role in delivering a project that meets the owner’s expectations and goals and satisfies the specifications (Ahn and Pearce, 2007). Namely, the contractor executes the plans and specifications, giving physical reality to the design team’s vision. In the case of deep energy retrofits, this role is particularly important, as installation and operation must conform to the design intent to achieve the predicted energy performance. Moreover, the contractor must understand the existing condition to effectively retrofit the building. This paper explores critical building energy efficiency measures and processes for achieving deep energy savings in retrofit projects. Specifically, we present the role of the contractor in a case study project in Phoenix, Arizona where the contractor was engaged in the project early in the design stage. This paper discusses the process of developing and selecting energy efficiency measures (EEMs). It explains the reasons for choosing particular EEMs, including a discussion of selecting an appropriate baseline for energy savings calculations, and documents the impact of EEMs on total energy consumption and design intent. The paper concludes with a discussion of recommendations that, if applied in part or whole, will increase the effectiveness of future construction teams in delivering deep energy retrofit projects.

DO OCCUPANTS IN GREEN BUILDINGS PRACTICE BETTER ENERGY SAVING BEHAVIOUR IN COMPUTER USAGE THAN OCCUPANTS IN CONVENTIONAL BUILDINGS?

Green buildings are not entirely successful in achieving energy saving targets.One way of improving energy targets is to encourage occupants to adopt energy saving behaviour.To date,energy saving behaviour has been given less focus in improving green building performance than other energy saving initiatives,such as retrofitting buildings for green features.This study uses comparison case studies between green buildings and conventional buildings in New Zealand to better understand the energy saving behaviour of occupants.Questionnaires were distributed to occupants in green and conventional buildings to evaluate the extent of energy saving behaviour practiced and to identify potential strategies to encourage energy saving behaviour.The objective of this paper is to investigate the level of energy saving behaviour between green and conventional office buildings to see if people in green buildings perform better energy saving behaviour than people in conventional buildings in computer usage.The findings do show better energy saving behaviour from occupants in green buildings than occupants in conventional buildings.The paper shows why this is the case.The recommended strategies to encourage energy saving behaviour used by different buildings are also discussed.Strategies include raising education awareness on energy efficiency among the building occupants,energy saving commitments,and to have an active building manager assigned for energy related matters.

A Homeowner-Based Methodology for Economic Analysis of Energy-Efficiency Measures in Residences

Residential energy-efficiency measures, besides energy savings, provide opportunities for improvement of thermal comfort, air quality, lighting quality, and operation. However, all these benefits sometimes are not enough to convince a homeowner to pay the incremental cost associated with the energy-efficiency measure. The objective of this work is to develop a methodology for the economic evaluation of residential energy-efficiency measures that can simplify the economic analysis for the homeowner while taking into consideration all factors associated with the purchase, ownership, and selling of the house with the energy-efficiency measure. The methodology accounts for direct and indirect economic parameters associated to an energy-efficiency measure;direct parameters such as the mortgage interest and fuel price escalation rate, and indirect parameters such as savings account interest and marginal income tax rate. The methodology also considers different cases based on the service life of the energy-efficiency measure and loss of efficiency through a derating factor. To estimate the market value, the methodology uses the future energy cost savings instead of the cost of the EEM. Results from the methodology offer to homeowner annual net savings and net assets. The annual net savings gives the homeowner a measure of the annual positive cash flow that can be obtained from an energy-efficiency project;but more important, the net assets offer a measure of the added net wealth. To simplify and increase the use of the methodology by homeowners, the methodology has been implemented in an Excel tool that can be downloaded from the TxAIRE’s website.

ANSI/ASHRAE/ASHE standard 170-2021《医疗设施通风》修订内容简介

对ANSI/ASHRAE/ASHE standard 170-2021《医疗设施通风》的主要修订内容进行了分析,包括:修改医用房间名称,将有较高设计要求的房间与其他房间分开并提出细化指标;增加值班状态,为医疗建筑节能运行提供方法依据;进一步明确各类医疗用房排风过滤效率。此外,对ASHRAE 170发展趋势进行了简要介绍,对未来发展进行了展望,以期为我国医疗建筑相关标准规范的制订/修订提供参考。

Development and Application of Special Fertilizer for Crops in Guangxi Region

Different crops need different kinds of nutrients. In this paper,formula of special fertilizer for common field crops in Guangxi is explored from the angle of grain crops,fruits,vegetables,sugar crops,oil crops,etc.,and corresponding production equipment and methods are provided,which could convenience for agricultural precision fertilization and theoretical basis and technical reference for cost saving and efficiency increasing of fertilizer.

RISK FRAMEWORK FOR ENERGY PERFORMANCE CONTRACTING BUILDING RETROFITS

Energy performance contracting(EPC)has emerged as a useful project financ-ing and delivery tool for building retrofits,particularly among building owner-ships which have experienced reduced funding for capital projects.Through EPC,a contractor(called the EPC contractor or the energy service company)guaran-tees minimum energy savings performance and enables the building owner to finance the project using utility savings over the length of the project(which is typically 12-15 years,or longer).Despite its growing use,there is a dearth of lit-erature regarding a contractor’s risks related to the delivery and execution of EPC building retrofits.This is particularly important as the performance guarantee effec-tively transfers project performance risk from the owner to the EPC contractor.This research proposes a project factors-based risk framework for EPC building retrofits,initially developed through a comprehensive review of relevant literature and project documents and refined through the elicited expertise of 19 highly expe-rienced EPC contracting professionals.A Delphi technique-based expertise elici-tation strategy was used to confirm the findings of the a priori(literature-based)framework and provide additional analysis related to risk causes and control mea-sures as well as relative risk importance.This information was used to construct a refined risk framework which provides insight into the lengthy project performance period during the earliest phases of the project’s life cycle.This has the advantage of providing rapid screening of the project factors that can potentially lead to the greatest project performance risks.