Unstable evolution of railway slope under the rainfall-vibration joint action

Understanding the unstable evolution of railway slopes is the premise for preventing slope failure and ensuring the safe operation of trains.However,as two major factors affecting the stability of railway slopes,few scholars have explored the unstable evolution of railway slopes under the joint action of rainfall-vibration.Based on the model test of sandy soil slope,the unstable evolution process of slope under locomotive vibration,rainfall,and rainfall-vibration joint action conditions was simulated in this paper.By comparing and analyzing the variation trends of soil pressure and water content of slope under these conditions,the change laws of pore pressure under the influence of vibration and rainfall were explored.The main control factors affecting the stability of slope structure under the joint action conditions were further defined.Combined with the slope failure phenomena under these three conditions,the causes of slope instability resulting from each leading factor were clarified.Finally,according to the above conclusions,the unstable evolution of the slope under the rainfall-vibration joint action was determined.The test results show that the unstable evolution process of sandy soil slope,under the rainfall-vibration joint action,can be divided into:rainfall erosion cracking,vibration promotion penetrating,and slope instability sliding three stages.In the process of slope unstable evolution,rainfall and vibration play the roles of inducing and promoting slide respectively.In addition,the deep cracks,which are the premise for the formation of the sliding surface,and the violent irregular fluctuation of soil pressure,which reflects the near penetration of the sliding surface,constitute the instability characteristics of the railway slope together.This paper reveals the unstable evolution of sandy soil slopes under the joint action of rainfall-vibration,hoping to provide the theoretical basis for the early warning and prevention technology of railway slopes.

Comparative experimental investigation of chemical grouting into a fracture with flowing and static water

We present a series of experimental tests on chemical grouting into a fracture with flowing and static water,using a transparent fracture grouting experimental device.Variations of seepage pressure and grout propagation were compared in our investigation.The results show that flowing water results in drops of seepage pressure,development of penetration radii in the upstream side and drops of propagation area during the same period,compared with grouting in static water.The propagation area in static water is always round before grouts reach the joint boundaries.However,the propagation shape changes from round to an elliptic shape for grouting into a fracture with flowing water.A theoretical model for the grout penetration radius in a fracture considering flowing velocity was developed and validated by our experimental results.These results are helpful in improving understanding of fracture grouting mechanism and in guiding engineering practices.

Dynamic response analysis of ship-bridge collisions experiment

Over the past decades, there has been continual construction of sea-crossing bridges as the technology of transportation improves. The probability of bridge pier being subjected to more vehicular impact is also growing. This study performed scale model tests and analyzed a collision mechanism considering the non-navigable span of a sea-crossing bridge in East China Sea as an engineering background. Comparing the test results with the finite element calculations, the dynamic response of the sample bridge and local damages of the fragile components under impact force were evaluated. Subsequently, the time-frequency characteristics of the vibration signal were analyzed based on wavelet packet analysis, and the multi-resolution characteristics as well as energy distribution of the vibration signal were discussed. It was observed that the impact energy transferred from ship to pier during the period of collision distributed different frequency bands with varying characteristics. The main frequency band(0–62.5 Hz) contains more than 75% of the vibration energy. The analysis can provide a basis for structural damage identification after the collision and anti-collision design of bridges.