Ore grades are currently declining and mines are increasingly required to operate more efficiently in order to save costs and conserve resources. As a result, automated procedures to control and measure process effici...Ore grades are currently declining and mines are increasingly required to operate more efficiently in order to save costs and conserve resources. As a result, automated procedures to control and measure process efficiency have become popular: The demand for sustainable mining and metals processing is globally increasing. Mineral Liberation Analysis is a well established technique to analyse and optimize mining processes and its significance to process mineralogy studies and mineral & metallurgical processing has been widely reported. Dedicated systems consisting of an optimized scanning electron microscopes (SEM) and usually several X-ray detectors are an established solution. With the advent of large area SDDs (Silicon drift detector) and progress in stage automation on conventional SEMs, the speed of X-Ray acquisition is no longer a limiting factor. However, until now, the particle analysis packages on commercially available systems do not lend themselves to Mineral Liberation Analysis without significant modification. INCAMineral is a new solution for mineral liberation analysis which runs on conventional SEMs equipped with large area SDDs.展开更多
The utility of GIS （geographic information system） methods and spatial statistical analysis on spectral maps of sediment samples were examined. Detailed elemental maps are often constructed using energy dispersive X...The utility of GIS （geographic information system） methods and spatial statistical analysis on spectral maps of sediment samples were examined. Detailed elemental maps are often constructed using energy dispersive X-ray techniques and SEM （scanning electron microscopy）. The elemental neighborhood associations of a single element, P （phosphorus）, were quantified at a magnification of 3,000 ×. For each of the 170,000 pixels on the images which displayed a strong P concentration, neighborhoods from 0.1μm^2 to 12 μm^2 were examined for associated elemental concentrations. PCA （principal component analysis） revealed two significant neighborhood types associated with P in samples of pH 4, and three neighborhood types at pH 8. These neighborhoods corresponded to Mg-P associations commonly found to be chemically prevalent in river sediments impacted by agricultural operations. Discriminant analysis showed that the greatest accuracy in predicting sample pH could be achieved by using a neighborhood size of 12 ~m2. Potassium at relatively large neighborhood sizes was the element most significant in predicting pH. While many of the chemical associations in close proximity to P could be predicted and explained through mineral solubility, spatial analysis provided some interesting insights into the structure of the samples. Results also indicted differences in the spatial scale associated with different processes.展开更多
This study shows that submicron/nanoparticles found in bacterial cells (S. aureus) incubated with polyurethane (a material commonly used for prostheses in odontostomatology) are a consequence of biodestruction. The pr...This study shows that submicron/nanoparticles found in bacterial cells (S. aureus) incubated with polyurethane (a material commonly used for prostheses in odontostomatology) are a consequence of biodestruction. The presence of polyurethane nanoparticles into bacterial vesicles suggests that the internalization process occurs through endocytosis. TEM and FIB/SEM are a suitable set of correlated instruments and techniques for this multi facet investigation: polyurethane particles influence the properties of S. aureus from the morpho-functional standpoint that may have undesirable effects on the human body. S. aureus and C. albicans are symbiotic microorganisms;it was observed that C. albicans has a similar interaction with polyurethane and an increment of the biodestruction capacity is expected by its mutual work with S. aureus.展开更多
我国东南沿海尤其是温州地区广泛存在上覆深厚软土下覆不均匀卵石的地层。该区域的钻孔灌注桩常采用后注浆技术改善其承载性能。为了评价后注浆技术对这类地层中灌注桩承载力改善效果,开展了相应的模型试验,对比了不同注浆量对桩承载力...我国东南沿海尤其是温州地区广泛存在上覆深厚软土下覆不均匀卵石的地层。该区域的钻孔灌注桩常采用后注浆技术改善其承载性能。为了评价后注浆技术对这类地层中灌注桩承载力改善效果,开展了相应的模型试验,对比了不同注浆量对桩承载力的影响程度;并结合扫描电镜(scanning electron microscope,简称SEM)试验分析了浆液分布特点,探讨了浆液在卵石层中的扩散范围,研究了浆液扩散范围与桩承载力之间的关系。结果表明:浆液能够有效地填充桩端卵石层,注浆量的增加使得填充范围扩大,填充范围为3~4倍桩径时,桩的承载力改善最显著。在不均匀卵石持力层中存在一个最优注浆量,最优归一化注浆量约为2.8,若超过该最优注浆量归一化值,桩的承载力不再显著提高。单桩模型试验确定的最优注浆量与刘金砺公式[1]的预测结果接近。扫描电镜技术有助于评价桩的后注浆技术在上覆深厚软土下覆不均匀卵石的土层中的效果。展开更多
文摘Ore grades are currently declining and mines are increasingly required to operate more efficiently in order to save costs and conserve resources. As a result, automated procedures to control and measure process efficiency have become popular: The demand for sustainable mining and metals processing is globally increasing. Mineral Liberation Analysis is a well established technique to analyse and optimize mining processes and its significance to process mineralogy studies and mineral & metallurgical processing has been widely reported. Dedicated systems consisting of an optimized scanning electron microscopes (SEM) and usually several X-ray detectors are an established solution. With the advent of large area SDDs (Silicon drift detector) and progress in stage automation on conventional SEMs, the speed of X-Ray acquisition is no longer a limiting factor. However, until now, the particle analysis packages on commercially available systems do not lend themselves to Mineral Liberation Analysis without significant modification. INCAMineral is a new solution for mineral liberation analysis which runs on conventional SEMs equipped with large area SDDs.
文摘The utility of GIS （geographic information system） methods and spatial statistical analysis on spectral maps of sediment samples were examined. Detailed elemental maps are often constructed using energy dispersive X-ray techniques and SEM （scanning electron microscopy）. The elemental neighborhood associations of a single element, P （phosphorus）, were quantified at a magnification of 3,000 ×. For each of the 170,000 pixels on the images which displayed a strong P concentration, neighborhoods from 0.1μm^2 to 12 μm^2 were examined for associated elemental concentrations. PCA （principal component analysis） revealed two significant neighborhood types associated with P in samples of pH 4, and three neighborhood types at pH 8. These neighborhoods corresponded to Mg-P associations commonly found to be chemically prevalent in river sediments impacted by agricultural operations. Discriminant analysis showed that the greatest accuracy in predicting sample pH could be achieved by using a neighborhood size of 12 ~m2. Potassium at relatively large neighborhood sizes was the element most significant in predicting pH. While many of the chemical associations in close proximity to P could be predicted and explained through mineral solubility, spatial analysis provided some interesting insights into the structure of the samples. Results also indicted differences in the spatial scale associated with different processes.
文摘This study shows that submicron/nanoparticles found in bacterial cells (S. aureus) incubated with polyurethane (a material commonly used for prostheses in odontostomatology) are a consequence of biodestruction. The presence of polyurethane nanoparticles into bacterial vesicles suggests that the internalization process occurs through endocytosis. TEM and FIB/SEM are a suitable set of correlated instruments and techniques for this multi facet investigation: polyurethane particles influence the properties of S. aureus from the morpho-functional standpoint that may have undesirable effects on the human body. S. aureus and C. albicans are symbiotic microorganisms;it was observed that C. albicans has a similar interaction with polyurethane and an increment of the biodestruction capacity is expected by its mutual work with S. aureus.
文摘我国东南沿海尤其是温州地区广泛存在上覆深厚软土下覆不均匀卵石的地层。该区域的钻孔灌注桩常采用后注浆技术改善其承载性能。为了评价后注浆技术对这类地层中灌注桩承载力改善效果,开展了相应的模型试验,对比了不同注浆量对桩承载力的影响程度;并结合扫描电镜(scanning electron microscope,简称SEM)试验分析了浆液分布特点,探讨了浆液在卵石层中的扩散范围,研究了浆液扩散范围与桩承载力之间的关系。结果表明:浆液能够有效地填充桩端卵石层,注浆量的增加使得填充范围扩大,填充范围为3~4倍桩径时,桩的承载力改善最显著。在不均匀卵石持力层中存在一个最优注浆量,最优归一化注浆量约为2.8,若超过该最优注浆量归一化值,桩的承载力不再显著提高。单桩模型试验确定的最优注浆量与刘金砺公式[1]的预测结果接近。扫描电镜技术有助于评价桩的后注浆技术在上覆深厚软土下覆不均匀卵石的土层中的效果。
