Ultrasonic Scattered Field Distribution of One and Two Cylindrical Solids with Phased Array Technique

The scattered fields of plane waves in a solid from a cylinder or sphere are critical in determining its acoustic characteristics as well as in engineering applications. This paper investigates the scattered field distributions of different incident waves created by elastic cylinders embedded in an elastic isotropic medium. Scattered waves, including longitudinal and transverse waves both inside and outside the cylinder, are described with specific modalities under an incident plane wave. A model with a scatterer embedded in a structural steel matrix and filled with aluminum is developed for comparison with the theoretical solution. The frequency of the plane wave ranged from 235 kHz to 2348 kHz, which corresponds to scaling factors from 0.5 to 5. Scattered field distributions in matrix materials blocked by an elastic cylindrical solid have been obtained by simulation or calculated using existing parameters. The simulation results are in good agreement with the theoretical solution, which supports the correctness of the simulation analysis. Furthermore, ultrasonic phased arrays are used to study scattered fields by changing the characteristics of the incident wave. On this foundation, a partial preliminary study of the scattered field distribution of double cylinders in a solid has been carried out, and the scattered field distribution at a given distance has been found to exhibit particular behaviors at different moments. Further studies on directivities and scattered fields are expected to improve the quantification of scattered images in isotropic solid materials by the phased array technique.

Monitoring Surface Deformation Using Distributed Scatterers InSAR

In the past two decades,extensive and in-depth research has been conducted on Time Series InSAR technology with the advancement of high-performance SAR satellites and the accumulation of big SAR data.The introduction of distributed scatterers in Distributed Scatterers InSAR(DS-InSAR)has significantly expanded the application scenarios of InSAR geodetic measurement by increasing the number of measurement points.This study traces the history of DS-InSAR,presents the definition and characteristics of distributed scatterers,and focuses on exploring the relationships and distinctions among proposed algorithms in two crucial steps:statistically homogeneous pixel selection and phase optimization.Additionally,the latest research progress in this field is tracked and the possible development direction in the future is discussed.Through simulation experiments and two real InSAR case studies,the proposed algorithms are compared and verified,and the advantages of DS-InSAR in deformation measurement practice are demonstrated.This work not only offers insights into current trends and focal points for theoretical research on DS-InSAR but also provides practical cases and guidance for applied research.

Scattered Rural Settlements and Development of Mountainous Regions in Western Sichuan,China

Making rural settlements of Mountainous Regions in Western Sichuan as the study objects and using symbolic statistical methods, then combining the case study of Daofu County, the paper analyzes the negative impact of the scattered rural settlements on infrastructure construction, farmers＇ income increase and mountain ecological reconstruction in mountainous regions of western Sichuan. The results indicate that economic density is positively related to both rural settlements density （R^2=0.73） and rural population density （R^2=0.77）, and it is the same for relationship between towns density and rural settlements density （R^2=0.88） and between towns density and economic density （R^2=0.71）, and the scattered distribution pattern of the rural settlements and shortage of economic centers is a major factor to the lagged socioeconomic development. On the eco-economic zoning to Daofu County, the paper indicates the spatial distribution model and the industrial development model of the rural settlements need to be changed, and rural population should be concentrated in larger rural settlements with development of off-farm industries while infrastructure construction is to reinforced.

Model of bidirectional reflectance distribution function for metallic materials

Based on the three-component assumption that the reflection is divided into specular reflection,directional diffuse reflection,and ideal diffuse reflection,a bidirectional reflectance distribution function（BRDF） model of metallic materials is presented.Compared with the two-component assumption that the reflection is composed of specular reflection and diffuse reflection,the three-component assumption divides the diffuse reflection into directional diffuse and ideal diffuse reflection.This model effectively resolves the problem that constant diffuse reflection leads to considerable error for metallic materials.Simulation and measurement results validate that this three-component BRDF model can improve the modeling accuracy significantly and describe the reflection properties in the hemisphere space precisely for the metallic materials.

Influence of the channel electric field distribution on the polarization Coulomb field scattering in In_(0.18) Al_(0.82) N/AlN/GaN heterostructure field-effect transistors

By making use of the quasi-two-dimensional （quasi-2D） model, the current-voltage （l-V） characteristics of In0AsA10.82N/A1N/GaN heterostructure field-effect transistors （HFETs） with different gate lengths are simulated based on the measured capacitance-voltage （C-V） characteristics and I-V characteristics. By analyzing the variation of the electron mobility for the two-dimensional electron gas （2DEG） with electric field, it is found that the different polarization charge distributions generated by the different channel electric field distributions can result in different polarization Coulomb field scatterings. The difference between the electron mobilities primarily caused by the polarization Coulomb field scatterings can reach up to 1522.9 cm2/V.s for the prepared In0.38AI0.82N/A1N/GaN HFETs. In addition, when the 2DEG sheet density is modulated by the drain-source bias, the electron mobility presents a peak with the variation of the 2DEG sheet density, the gate length is smaller, and the 2DEG sheet density corresponding to the peak point is higher.

Recognition of the major scattering sources on complex targets based on the high frequency radar cross section integrated calculation technique

Based on the high frequency （HF） integrated radar cross section （RCS） calculation approach, a technique of detecting major scattering source is developed by using an appropriate arithmetic for scattering distribution and scattering source detection. For the perfect adaptability to targets and the HF of the HF integrated RCS calculation platform, this technique is suitable to solve large complex targets and has lower requirement to the target modeling. A comparison with the result of 2-D radar imaging confirms the accuracy and reliability of this technique in recognition of the major scattering source on complex targets. This technique provides the foundation for rapid integrated evaluation of the scattering performance and 3-D scattering model reconstruction of large complex targets.

CHARACTERISTIC DISTRIBUTION OF SLOPE SCATTERED RADIATION WITH ITS CALCULATION MODEL

Detailed analysis is made of anisotropy of slope scattered radiation(SSR)in terms of the data obtained by a pyranometer mounted on a theodolite,indicating the change of SSR as a function of orientation and slope. And also reviewed are the models for SSR calculation developed by earlier researchers through the tests with the data.On this basis a new model for SSR flux density is proposed which is of higher applicability and has advantage over the analogues abroad both in physical implication and accuracy of the calculations.

Theoretical study on neutron distribution of ^208Pb by parity-violating electron scattering

The precise determination of neutron distribution has important implications for both nuclear structure and nuclear astrophysics. The purpose of this paper is to study the characteristics of neutron distribution of^208 Pb by parity-violating electron scattering（PVS）. Parity-violating asymmetries of^208 Pb with different types of neutron skins are systematically calculated and compared with the experimental data of PREx. The results indicate that the PVS experiments are very sensitive to the nuclear neutron distributions. From further PVS measurements, detailed information on nuclear neutron distributions can be extracted.

Helium-3 global optical model potential with energies below 250 MeV

A new set of global phenomenological optical model potential parameters has been obtained for helium-3 projectile, by simultaneously fitting the experimental data of helium-3 total reaction cross sections and elastic scattering angular distributions in the mass range of target nuclei 20〈〈A〈209 at incident energies below 250 MeV. A comparison has been made between the extracted helium-3 global optical model potential parameters and the existing ones. The calculated results of total reaction cross sections and elastic scattering angular distributions are also agreement. compared with experimental data with their satisfactory

Comparison between global phenomenological and microscopic optical potentials for proton as projectile below 100 MeV

For 112 target nuclei （52 elements） with proton as projectile, we calculate the reaction cross sections and elastic scattering angular distributions, as well as the X^2 values for 16 kinds of proton optical model potentials： two sets of phenomenological global optical potentials and the microscopic optical potentials proposed by Shen et al for 14 sets of Skyrme force parameters： GSI-6, SBJS, SKM, SGI-Ⅱ, SKa-b, SCOI-Ⅱ. We find that for obtaining the proton microscopic optical potential based on the nuclear matter approach with Skyrme force, SGI, SKa and SKb are the three sets of optimal Skyrme force parameters.

Widely tunable linear-cavity multiwavelength fiber laser with distributed Brillouin scattering

We demonstrate a multiple wavelength Brillouin/erbium fiber laser in a linear cavity configuration.The laser cavity is made up of a fiber loop mirror on one end of the resonator and a virtual mirror generated from the distributed stimulated Brillouin scattering effect on the other end.Due to the weak reflectivity provided by the virtual mirror,self-lasing cavity modes are completely suppressed from the laser cavity.At Brillouin pump and 1480-nm pump powers of 2 and 130 mW,respectively,11 channels of the demonstrated laser with an average total power of 7.13 dBm can freely be tuned over a span of 37-nm wavelength from 1530 to 1567 nm.

THEORETICAL ANALYSES ON DISCRETE FORMULAE OF DIRECTIONAL DIFFERENTIALS IN THE FINITE POINT METHOD

For the five-point discrete formulae of directional derivatives in the finite point method,overcoming the challenge resulted from scattered point sets and making full use of the explicit expressions and accuracy of the formulae,this paper obtains a number of theoretical results:(1)a concise expression with definite meaning of the complicated directional difference coefficient matrix is presented,which characterizes the correlation between coefficients and the connection between coefficients and scattered geometric characteristics;(2)various expressions of the discriminant function for the solvability of numerical differentials along with the estimation of its lower bound are given,which are the bases for selecting neighboring points and making analysis;(3)the estimations of combinatorial elements and of each element in the directional difference coefficient matrix are put out,which exclude the existence of singularity.Finally,the theoretical analysis results are verified by numerical calculations.The results of this paper have strong regularity,which lay the foundation for further research on the finite point method for solving partial differential equations.

Calculation and analysis of cross-sections for p+^(184)W reactions up to 200 MeV

A set of optimal proton optical potential parameters for pd-lS4w reactions are obtained at incident proton energy up to 250 MeV. Based on these parameters, the reaction cross-sections, elastic scattering angular distributions, energy spectra and double differential cross sections of proton-induced reactions on lS4w are calculated and analyzed by using theoretical models which integrate the optical model, distorted Born wave approximation theory, intra- nuclear cascade model, exciton model, Hauser-Feshbach theory and evaporation model. The calculated results are compared with existing experimental data and good agreement is achieved.