期刊文献+
共找到47篇文章
< 1 2 3 >
每页显示 20 50 100
Noninvasive Label-Free Detection of Cortisol and Lactate Using Graphene Embedded Screen-Printed Electrode 被引量:3
1
作者 Satish K.Tuteja Connor Ormsby Suresh Neethirajan 《Nano-Micro Letters》 SCIE EI CAS 2018年第3期42-51,共10页
A sensitive and specific immunosensor for the detection of the hormones cortisol and lactate in human or animal biological fluids, such as sweat and saliva, was devised using the label-free electrochemical chronoamper... A sensitive and specific immunosensor for the detection of the hormones cortisol and lactate in human or animal biological fluids, such as sweat and saliva, was devised using the label-free electrochemical chronoamperometric technique. By using these fluids instead of blood,the biosensor becomes noninvasive and is less stressful to the end user, who may be a small child or a farm animal.Electroreduced graphene oxide(e-RGO) was used as a synergistic platform for signal amplification and template for bioconjugation for the sensing mechanism on a screenprinted electrode. The cortisol and lactate antibodies were bioconjugated to the e-RGO using covalent carbodiimide chemistry. Label-free electrochemical chronoamperometric detection was used to analyze the response to the desired biomolecules over the wide detection range. A detection limit of 0.1 ng mL^(-1) for cortisol and 0.1 mM for lactate was established and a correlation between concentration and current was observed. A portable, handheld potentiostat assembled with Bluetooth communication and battery operation enables the developed system for point-of-care applications. A sandwich-like structure containing the sensing mechanisms as a prototype was designed to secure the biosensor to skin and use capillary action to draw sweat or other fluids toward the sensing mechanism. Overall, the immunosensor shows remarkable specificity, sensitivity as well as the noninvasive and point-of-care capabilities and allows the biosensor to be used as a versatile sensing platform in both developed and developing countries. 展开更多
关键词 GRAPHENE IMMUNOSENSOR ELECTROCHEMICAL screen-printed electrodes Cortisol sensor
下载PDF
A sensitive electrochemical detection of metronidazole in synthetic serum and urine samples using low-cost screen-printed electrodes modified with reduced graphene oxide and C60 被引量:1
2
作者 Elsa Maria Materon Ademar Wong +2 位作者 Tayane Aguiar Freitas Ronaldo Censi Faria Osvaldo N.Oliveira Jr. 《Journal of Pharmaceutical Analysis》 SCIE CAS CSCD 2021年第5期646-652,共7页
Monitoring the concentration of antibiotics in body fluids is essential to optimizing the therapy and minimizing the risk of bacteria resistance,which can be made with electrochemical sensors tailored with appropriate... Monitoring the concentration of antibiotics in body fluids is essential to optimizing the therapy and minimizing the risk of bacteria resistance,which can be made with electrochemical sensors tailored with appropriate materials.In this paper,we report on sensors made with screen-printed electrodes(SPE)coated with fullerene(C60),reduced graphene oxide(rGO)and Nafion(NF)(C60-rGO-NF/SPE)to determine the antibiotic metronidazole(MTZ).Under optimized conditions,the C60-rGO-NF/SPE sensor exhibited a linear response in square wave voltammetry for MTZ concentrations from 2.5×10^(-7) to 34×10^(-6) mol/L,with a detection limit of 2.1×10^(-7) mol/L.This sensor was also capable of detecting MTZ in serum and urine,with recovery between 94%and 100%,which are similar to those of the standard chromatographic method(HPLC-UV).Because the C60-rGO-NF/SPE sensor is amenable to mass production and allows for MTZ determination with simple principles of detection,it fulfills the requirements of therapeutic drug monitoring programs. 展开更多
关键词 METRONIDAZOLE FULLERENE Reduced graphene oxide screen-printed electrodes Antibiotic
下载PDF
Anodic voltammetric determination of gemifloxacin using screen-printed carbon electrode 被引量:1
3
作者 Abd-Elgawad Radi Amira Khafagy +1 位作者 Amira El-shobaky Hatem El-mezayen 《Journal of Pharmaceutical Analysis》 SCIE CAS 2013年第2期132-136,共5页
The electrochemical oxidation behavior and voltammetric assay of gemifloxacin were investigated using differential-pulse and cyclic voltammetry on a screen-printed carbon electrode.The effects of pH,scan rates,and con... The electrochemical oxidation behavior and voltammetric assay of gemifloxacin were investigated using differential-pulse and cyclic voltammetry on a screen-printed carbon electrode.The effects of pH,scan rates,and concentration of the drug on the anodic peak current were studied.Voltammograms of gemifloxacin in Tris-HCl buffer(pH 7.0) exhibited a well-defined single oxidation peak.A differential-pulse voltammetric procedure for the quantitation of gemifloxacin has been developed and suitably validated with respect to linearity,limits of detection and quantification,accuracy,precision,specificity,and robustness.The calibration was linear from 0.5 to 10.0 μM,and the limits of detection and quantification were 0.15 and 5.0 μM.Recoveries ranging from 96.26% to 103.64% were obtained.The method was successfully applied to the determination of gemifloxacin in pharmaceutical tablets without any pre-treatment.Excipients present in the tablets did not interfere in the assay. 展开更多
关键词 screen-printed carbon electrode Voltammetry Gemifloxacin Pharmaceutical analysis
下载PDF
Amperometric Hydrogen Peroxide Biosensor Based on Horseradish Peroxidase Entrapped in Titania Sol-Gel Film on Screen-Printed Electrode
4
作者 Reza E. Sabzi Fereshteh Rasouli Farshad Kheiri 《American Journal of Analytical Chemistry》 2013年第11期607-615,共9页
We report the fabrication of disposable and flexible Screen-Printed Electrodes (SPEs). This new type of screen-printed electrochemical platform consists of Ag nanoparticles (AgNPs) and graphite composite. For this pur... We report the fabrication of disposable and flexible Screen-Printed Electrodes (SPEs). This new type of screen-printed electrochemical platform consists of Ag nanoparticles (AgNPs) and graphite composite. For this purpose, silver nanoparticles were first synthesized by a chemical reduction method. The morphology and structure of the AgNPs were analyzed using a Scanning Electron Microscope (SEM) and UV-Visible spectroscopy. Graphite was chosen as the working electrode material for the fabrication of a thick-film. The fabrication of a screen-printed hydrogen peroxide biosensor consisting of three electrodes on a polyethylene terephthalate (PET) substrate was performed with a spraying approach (working, counter and reference: enzyme electrode, graphite, pseudo reference: Ag/AgCl). This biosensor was fabricated by immobilizing the peroxidase enzyme (HRP) in a Titania sol-gel membrane which was obtained through a vapor deposition method. The biosensor had electrocatalytic activity in the reduction of H2O2 with linear dependence on H2O2 concentration in the range of 10-5 to 10-3 M;the detection limit was 4.5 × 10-6 M. 展开更多
关键词 screen-printed electrode Ag NANOPARTICLE TITANIA SOL-GEL BIOSENSOR
下载PDF
Gold Nanoparticles/Thermochromic Composite Film on Screen-Printed Electrodes for Simultaneous Detection of Protein and Temperature
5
作者 Dorothy Araba Yakoba Agyapong Hanjia Jiang +2 位作者 Xingjia Ni Jingwen Wu Hongjuan Zeng 《Journal of Biomaterials and Nanobiotechnology》 2021年第2期7-19,共13页
In this study, gold nanoparticles and thermochromic composite films modified screen-printed carbon electrodes (TM-AuNPsSPCEs) were developed as a platform for the simultaneous detection of protein and temperature. The... In this study, gold nanoparticles and thermochromic composite films modified screen-printed carbon electrodes (TM-AuNPsSPCEs) were developed as a platform for the simultaneous detection of protein and temperature. The TM-AuNPs composited film had better sensitivity resulting from the gold nanoparticles amplification effect. A phase transition model analysis of TM-AuNPs films found that the TM-AuNPs films had three-phase transition intervals (<45℃, 45℃ to 80℃ and >80℃) which accommodated the temperature requirements for protein denaturation. When used to detect different concentrations of haemoglobin (Hb) solution, the TM-AuNPs modified SPCEs had a better sensitivity in detecting the different concentrations in comparison to TM and AuNP modified SPCEs which showed no clear sensitivity towards the different Hb concentrations. The dual detection and excellent sensitivity show a good application prospect for the study of the TM-AuNPs composite film. 展开更多
关键词 screen-printed Carbon electrodes Gold Nanoparticles Thermochromic Material Simultaneous Detection of Proteins and Temperature
下载PDF
Aptasensor Based on Screen-Printed Carbon Electrodes Modified with CS/AuNPs for Sensitive Detection of Okadaic Acid in Shellfish 被引量:2
6
作者 Ni Zeng Xinyi Wang +4 位作者 Yiyang Dong Yan Yang Yingai Yin Lianhui Zhao Xu Wang 《Journal of Analysis and Testing》 EI CSCD 2023年第2期128-135,共8页
Okadaic acid(OA),a small molecule substance derived from shellfish,is one of the most widely distributed marine toxins with acute symptoms of vomiting and diarrhea after accidental ingestion.For this,there is an urgen... Okadaic acid(OA),a small molecule substance derived from shellfish,is one of the most widely distributed marine toxins with acute symptoms of vomiting and diarrhea after accidental ingestion.For this,there is an urgently need for sensitive and reliable methods to detect OA in real shellfish samples.In this study,a simple aptasensor based on screen-printed carbon electrode(SPCE)with modification of chitosan(CS)and gold nanoparticles(Au NPs)was designed for electrochemical determination of OA,and the electrode surface was modified with Au NPs by potential-sweeping electrodeposition,which greatly improved the electrochemical response.The entire detection and characterization process were carried out by cyclic voltammetry(CV)with a linear correlation in the range of 0.01-100 ng/m L and a limit of detection(LOD)of 6.7 pg/m L.Furthermore,recovery rates of 92.3-116%were obtained demonstrating excellent accuracy through the recovery trial of mussel and scallop samples. 展开更多
关键词 Okadaic acid APTASENSOR screen-printed carbon electrode CHITOSAN Gold nanoparticles Cyclic voltammetry
原文传递
3-甲基吡啶在PbO_2-SPE组合电极上的电氧化研究 被引量:8
7
作者 张玉敏 张恒彬 +2 位作者 徐玉玲 曹学静 林海波 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2005年第10期1858-1860,共3页
采用热压法制备PbO2-SPE组合电极,通过循环伏安和稳态极化曲线测量研究了该电极对3-甲基吡啶电氧化反应的活性.考察了阳极液中有、无液相支持电解质和不同阴极液情况下,电流密度与过电位和过电位与槽压的关系.初步研究了利用PbO2-SPE组... 采用热压法制备PbO2-SPE组合电极,通过循环伏安和稳态极化曲线测量研究了该电极对3-甲基吡啶电氧化反应的活性.考察了阳极液中有、无液相支持电解质和不同阴极液情况下,电流密度与过电位和过电位与槽压的关系.初步研究了利用PbO2-SPE组合电极在无液相支持电解质的溶液中进行3-甲基吡啶电氧化制取烟酸的可行性,给出了特定条件下的选择性和电流效率. 展开更多
关键词 PbO2-spe组合电极 3-甲基吡啶 电氧化 固体电解质
下载PDF
βPbO_2-SPE膜电极材料的制备和性能 被引量:6
8
作者 万亚珍 刘金盾 +1 位作者 张翔 李燕红 《材料研究学报》 EI CAS CSCD 北大核心 2006年第5期499-503,共5页
将Pb2+络离子交换进入Nafion324基膜内,在碱性条件下通氯气氧化制备出βPbO2-SPE膜电极材料,研究了Nafion324膜的活化、浸渍液中Pb2+的浓度、氧化时间、超声波搅拌强度和氧化温度等参数对βPbO2-SPE电极材料的结构和性能的影响.结果表... 将Pb2+络离子交换进入Nafion324基膜内,在碱性条件下通氯气氧化制备出βPbO2-SPE膜电极材料,研究了Nafion324膜的活化、浸渍液中Pb2+的浓度、氧化时间、超声波搅拌强度和氧化温度等参数对βPbO2-SPE电极材料的结构和性能的影响.结果表明,浸渍液最佳组成为0.05 mol·L-1 Pb(NO3)2+1 mol·L-1 NH4Ac;氧化过程中最适宜超声波搅拌强度为40 W,最佳氧化温度为40℃,氧化时间为2.0 h.在最佳工艺条件下制备的βPbO2-SPE膜电极中活性βPbO2的含量高,βPbO2活性层致密,βPbO2分布均匀,与基膜结合牢固.电化学降解苯酚时βPbO2-SPE膜电极具有比较高的电流效率和电化学稳定性. 展开更多
关键词 复合材料 spe膜电极 化学镀 βPbO2
下载PDF
SPE复合电极的制备及其在有机电化学合成中的应用 被引量:5
9
作者 马淳安 张文魁 +2 位作者 黄辉 甘永平 高晓萍 《浙江工业大学学报》 CAS 1999年第4期265-271,共7页
概述了SPE复合电极的发展历程,对SPE 复合电极的类型和制备工艺进行了重点探讨,并举例说明了SPE电极的反应特性原理,最后对其在有机电合成领域中的应用进行了综合评述。
关键词 制备 spe复合电极 有机电化学合成 应用
下载PDF
Pt/SPE电极的制备及其电化学性能 被引量:2
10
作者 马淳安 张文魁 +2 位作者 黄辉 甘永平 高晓萍 《应用化学》 CAS CSCD 北大核心 2001年第9期701-704,共4页
采用 SEM、EDS和电化学方法研究了渗透法和浸渍法制备工艺对 Pt/SPE电极的表面形貌、组成的影响 ,并考察了苯甲醇在 Pt/SPE电极上的电化学氧化性能 .结果表明 ,浸渍法可以有效降低电极的载 Pt量 ,增加 Pt的分散度 ,电极的真实表面积 ,... 采用 SEM、EDS和电化学方法研究了渗透法和浸渍法制备工艺对 Pt/SPE电极的表面形貌、组成的影响 ,并考察了苯甲醇在 Pt/SPE电极上的电化学氧化性能 .结果表明 ,浸渍法可以有效降低电极的载 Pt量 ,增加 Pt的分散度 ,电极的真实表面积 ,并降低电化学反应的表观活化能 .浸渍法制备的 展开更多
关键词 固态电解质 Pt/spe电极 制备 电化学性能 铂电极 苯甲醇 电氧化
下载PDF
羟基新戊醛在PbO_2-SPE组合电极上的电氧化研究 被引量:2
11
作者 余建国 曹学静 +2 位作者 张恒彬 李斐 徐玉玲 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2006年第1期121-124,共4页
采用热压-电镀法制得PbO2-固体高聚物电解质(SPE)组合电极.通过伏安曲线和槽压与过电位曲线的测量,研究羟基新戊醛在该组合电极上电氧化行为.通过PbO2-SPE组合电极在阳极液中有、无液相支持电解质及不同阴极液情况下的循环伏安曲线和线... 采用热压-电镀法制得PbO2-固体高聚物电解质(SPE)组合电极.通过伏安曲线和槽压与过电位曲线的测量,研究羟基新戊醛在该组合电极上电氧化行为.通过PbO2-SPE组合电极在阳极液中有、无液相支持电解质及不同阴极液情况下的循环伏安曲线和线性伏安曲线比较,证明该组合电极对羟基新戊醛氧化有较好的电催化作用. 展开更多
关键词 PbO2-spe组合电极 固体高聚物电解质 羟基新戊醛 电氧化
下载PDF
2-甲基吡啶在PbO_2-SPE组合电极上的电氧化研究 被引量:2
12
作者 李斐 曹学静 +2 位作者 张恒彬 张玉敏 李克昌 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2007年第1期140-144,共5页
分别采用热压法和热压-电镀法制备PbO2-SPE组合电极,通过循环伏安和稳态极化曲线测量,研究了这两种电极对2-甲基吡啶电氧化反应的电催化活性,同时考察了工作电极电解液中有、无液相支持电解质电位与电流密度的关系及不同对电极电解液情... 分别采用热压法和热压-电镀法制备PbO2-SPE组合电极,通过循环伏安和稳态极化曲线测量,研究了这两种电极对2-甲基吡啶电氧化反应的电催化活性,同时考察了工作电极电解液中有、无液相支持电解质电位与电流密度的关系及不同对电极电解液情况下,电流密度与过电位和过电位与槽压的关系.通过一般PbO2电极与热压-电镀法PbO2-SPE组合电极在电流密度与过电位和电流密度与槽压变化的比较,发现热压-电镀法制备的PbO2-SPE组合电极在相同过电位下具有更高的电流密度,在相同电流密度下具有较低的槽压. 展开更多
关键词 固体高聚物电解质 PbO2-spe组合电极 2-甲基吡啶 电氧化
下载PDF
苯电催化加氢SPE电极的制备研究 被引量:1
13
作者 黄海燕 俞英 胡志松 《太阳能学报》 EI CAS CSCD 北大核心 2006年第3期250-254,共5页
研究了在离子交换膜上用化学沉积和浸渍还原制备SPE电极Pt/Nafion的方法,利用SEM和荧光显微镜对Pt在膜上的形态进行了研究,并以交换电流密度为指标,评价电极苯加氢性能。研究结果表明:用化学沉积法制备的电极载铂量较大,交换电流密度较... 研究了在离子交换膜上用化学沉积和浸渍还原制备SPE电极Pt/Nafion的方法,利用SEM和荧光显微镜对Pt在膜上的形态进行了研究,并以交换电流密度为指标,评价电极苯加氢性能。研究结果表明:用化学沉积法制备的电极载铂量较大,交换电流密度较小,铂颗粒堆积密集,且主要分布在膜的外侧;而用浸渍还原法制备的电极载铂量较小,交换电流密度较大,铂颗粒主要分布在膜的内侧;因此确定采用浸渍还原法制备SPE电极。浸渍还原法的优化条件为:Pt(NH3)4Cl2浓度0.8mmol/L,浸渍时间40min,NaBH4浓度1.2mmol/L,还原时间2h,反应温度50℃, 展开更多
关键词 氢能 spe电极 制备
下载PDF
SPE析氢电极的研究状况 被引量:3
14
作者 胡玮 俞英 《湖北大学学报(自然科学版)》 CAS 2003年第1期53-56,共4页
对SPE电解水技术中析氢电极的结构、催化剂的选择、制备方法以及性能作了较详尽的概述,指出了影响其性能的因素以及提高其性能的可能措施,并对电解水析氢电极的开发研制作了展望.
关键词 spe 析氢电极 电解水 氢能
下载PDF
Li|SPE|Li体系阻抗谱分析 被引量:1
15
作者 马俊涛 梁美霞 +2 位作者 李洪武 吴绍娇 张翠芬 《电池》 CAS CSCD 北大核心 2004年第6期420-421,共2页
为了深入研究对称锂金属电极聚合物电池的界面特性,以PEO为基质,并复配少量纳米无机填料及低分子乙氧化物,制备了固态纳米复合聚合物电解质膜,组装成对称锂金属电极模拟电池,利用交流阻抗法进行测试,并设计出等效电路对测试数据进行拟合... 为了深入研究对称锂金属电极聚合物电池的界面特性,以PEO为基质,并复配少量纳米无机填料及低分子乙氧化物,制备了固态纳米复合聚合物电解质膜,组装成对称锂金属电极模拟电池,利用交流阻抗法进行测试,并设计出等效电路对测试数据进行拟合,通过数学推导确定了各元件在复数平面图上的对应位置。该等效电路对PEO基固态聚合物电解质体系具有非常好的拟合效果。 展开更多
关键词 固态高分子电解质(spe) 聚氧化乙烯(PEO) 交流阻抗 对称锂电极
下载PDF
短时间内Pt-SPE气敏电极上CO氧化电流的衰退研究Ⅰ.Pt表面氧化深度的影响 被引量:2
16
作者 杨静 严河清 陆君涛 《武汉大学学报(自然科学版)》 CSCD 1997年第6期735-740,共6页
对短时间内Pt-SPE气敏电极上CO氧化电流的衰退现象的研究表明,Pt表面无CO吸附态情况下,衰退主要与电极阳极极化后Pt表面氧化程度加深有关;采用动电势扫描法可使电极对CO氧化的催化活性基本恢复,但随着电极的进一步... 对短时间内Pt-SPE气敏电极上CO氧化电流的衰退现象的研究表明,Pt表面无CO吸附态情况下,衰退主要与电极阳极极化后Pt表面氧化程度加深有关;采用动电势扫描法可使电极对CO氧化的催化活性基本恢复,但随着电极的进一步极化,衰退仍会继续. 展开更多
关键词 spe 一氧化碳 气敏电极 氧化 催化活性
下载PDF
SPE电解池催化剂载体的研究 被引量:3
17
作者 王海燕 刘志祥 +1 位作者 毛宗强 岳琪 《化工新型材料》 CAS CSCD 北大核心 2009年第1期32-33,59,共3页
采用氮化钛、碳化钛、碳化硅纳米粉体作为载体,制备担载型RuO2催化剂;并利用X-射线衍射(XRD)及电化学测试技术对样品进行表征。结果表明:纳米TiN、TiC粉体在高温煅烧时都发生了氧化反应,部分转化为TiO2,而纳米粉体SiC比较稳定,不发生化... 采用氮化钛、碳化钛、碳化硅纳米粉体作为载体,制备担载型RuO2催化剂;并利用X-射线衍射(XRD)及电化学测试技术对样品进行表征。结果表明:纳米TiN、TiC粉体在高温煅烧时都发生了氧化反应,部分转化为TiO2,而纳米粉体SiC比较稳定,不发生化学反应,RuO2/SiC催化剂相比RuO2/TiC、RuO2/TiN催化剂也具有较好的析氧催化活性。 展开更多
关键词 spe水电解 电催化剂 氧电极 碳化硅
下载PDF
硝基苯在Cu-SPE复合电极上的电还原反应特性研究 被引量:2
18
作者 方真荣 马淳安 +2 位作者 黄辉 张文魁 李美超 《精细化工》 EI CAS CSCD 北大核心 2000年第z1期98-101,共4页
以国产NF - 1型离子膜为SPE膜材料 ,采用浸渍还原法制备了Cu SPE复合电极 ,研究了硝基苯在此电极上的电还原反应及其主要影响因素 ,并建立了相应的扩散模型。结果表明 :Cu SPE复合电极对硝基苯的电还原反应具有较高的电催化活性 ,硝基... 以国产NF - 1型离子膜为SPE膜材料 ,采用浸渍还原法制备了Cu SPE复合电极 ,研究了硝基苯在此电极上的电还原反应及其主要影响因素 ,并建立了相应的扩散模型。结果表明 :Cu SPE复合电极对硝基苯的电还原反应具有较高的电催化活性 ,硝基苯及其产物在SPE膜内的扩散是反应的控制步骤 ,反应主要发生在Cu SPE界面的内表面 ,其扩散系数D0 =8.1× 10 -7cm2 /s ;经HPLC分析表明电还原产物主要为苯胺。 展开更多
关键词 Cu-spe复合电极 硝基苯 电还原
下载PDF
Graphene oxide/multi-walled carbon nanotubes/gold nanoparticle hybridfunctionalized disposable screen-printed carbon electrode to determine Cd(II)and Pb(II)in soil 被引量:3
19
作者 Hui Wang Yuan Yin +4 位作者 Guo Zhao Fernando Bienvenido Isabel M.Flores-Parrad Zhiqiang Wang Gang Liu 《International Journal of Agricultural and Biological Engineering》 SCIE EI CAS 2019年第3期194-200,共7页
Cadmium(Cd)and lead(Pb)in soil or water environment cause the ecological destruction and environmental deterioration when their contents exceed the natural background values.To trace the concentrations of Cd(II)and Pb... Cadmium(Cd)and lead(Pb)in soil or water environment cause the ecological destruction and environmental deterioration when their contents exceed the natural background values.To trace the concentrations of Cd(II)and Pb(II),a sensitive and selective electrode was developed using disposable screen-printed carbon electrode(SPE)immobilized with a composite film of reduced graphene oxide/carboxylation multi-walled carbon nanotubes/gold nanoparticle hybrid(RGO-MWNT-AuNP)throughπ-πbind.This highly conductive nano-composite layer,“RGO-MWNT-AuNP,”was characterized by scanning electron microscopy,UV-visible spectrometer,cyclic voltammetry,and electrochemical impedance spectroscopy.Square wave stripping voltammetry was applied to RGO-MWNT-AuNP/SPE to electroplate bismuth film and monitor the Cd(II)and Pb(II)simultaneously.To obtain high current responses,the detecting parameters were optimized.Under optimized conditions,the current responses showed a linear relationship with the concentrations of Cd(II)and Pb(II)in the range from 1.0 to 80.0μg/L with a lower detection limit of 0.7μg/L and 0.3μg/L(S/N=3),respectively.Finally,the prepared electrode was further employed to detect Cd(II)and Pb(II)in soil samples with good results. 展开更多
关键词 electrochemical electrode heavy metal contamination screen-printed carbon electrode graphene gold nanoparticle lead CADMIUM multi-walled carbon nanotube
原文传递
Rapid detection of organophosphorus pesticide residue on Prussian blue modified dual-channel screen-printed electrodes combing with portable potentiostat 被引量:4
20
作者 Qianwei Shi Yuanjie Teng +1 位作者 Yuchao Zhang Wenhan Liu 《Chinese Chemical Letters》 SCIE CAS CSCD 2018年第9期1379-1382,共4页
A novel electrochemical method for the rapid detection of organophosphorus pesticide residues was realized on a dual-channel screen-printed electrode (DSPE) that was integrated with a portable smartphone-controlled ... A novel electrochemical method for the rapid detection of organophosphorus pesticide residues was realized on a dual-channel screen-printed electrode (DSPE) that was integrated with a portable smartphone-controlled potentiostat. The two carbon working channels of DSPE were first modified by electrodepositing of Prussian blue. The channels were then modified with acetylcholinesterase (ACHE) via Nation. The inhibition ratio of AChE was detected by comparing the electrical current of acetylthiocholine (ATCh) that was catalyzed by the enzyme electrodes with (channel 1) and without (channel 2) organophosphorus pesticide. Inhibition ratios were related with the negative logarithm of the organophosphorus pesticide (trichlorfon, oxamyl, and isocarbophos) concentrations at optimum experimental conditions (pH 6.9 of electrolyte, 0.2V working potential, 2.5μL AChE modification amount, and 15 min inhibition time). The linear equations were 1%=32.301gC+ 253.3 (R=0.9750) for isocarbophos, I% = 35.991gC+ 270.1 (R = 0.9668) for chlorpyrifos, and 1% = 33.701gC+ 250.5 (R = 0.9606) for trichlorfon. The detection limits were calculated as 10-7 g/mL. Given that the inhibition ratios were only related with pesticide concentration and not with pesticide species, the proposed electrodes and electrometer can rapidly detect universal organophosphorus pesticides and assess pesticide pollution. 展开更多
关键词 Pesticide residue Rapid detection Electrochemical method screen-printed carbon electrodes Portable potentiostat
原文传递
上一页 1 2 3 下一页 到第
使用帮助 返回顶部