The micro robot based on screw motion wheels, which features high payload/mass ratio, fast and continuous motion, adaptation to pipe diameter or roundness variations, is suitable for locomotion and inspection inside s...The micro robot based on screw motion wheels, which features high payload/mass ratio, fast and continuous motion, adaptation to pipe diameter or roundness variations, is suitable for locomotion and inspection inside small diameter pipelines. The robot inspection system, Tubot I, developed at Shanghai University is composed of locomotion mechanism with an inner motor, a micro CCD camera and a monitor outside the pipeline. In the paper, the kinematics and statics analyses are presented for the screw locomotion system of Tubot I. The moving characteristics are obtained from experiments on the robot prototype.展开更多
Most of the existing screw drive in-pipe robots cannot actively adjust the maximum traction capacity, which limits the adaptability to the wide range of variable environment resistance, especially in curved pipes. In ...Most of the existing screw drive in-pipe robots cannot actively adjust the maximum traction capacity, which limits the adaptability to the wide range of variable environment resistance, especially in curved pipes. In order to solve this problem, a screw drive in-pipe robot based on adaptive linkage mechanism is proposed. The differential property of the adaptive linkage mechanism allows the robot to move without motion interference in the straight and varied curved pipes by adjusting inclining angles of rollers self-adaptively. The maximum traction capacity of the robot can be changed by actively adjusting the inclining angles of rollers. In order to improve the adaptability to the variable resistance, a torque control method based on the fuzzy controller is proposed. For the variable environment resistance, the proposed control method can not only ensure enough traction force, but also limit the output torque in a feasible region. In the simulations, the robot with the proposed control method is compared to the robot with fixed inclining angles of rollers. The results show that the combination of the torque control method and the proposed robot achieves the better adaptability to the variable resistance in the straight and curved pipes.展开更多
基金Supported by National High TechR&DProgramin China!( 86 3 5 1 2 970 4 2 6 86 3 5 1 2 980 4 1 8)
文摘The micro robot based on screw motion wheels, which features high payload/mass ratio, fast and continuous motion, adaptation to pipe diameter or roundness variations, is suitable for locomotion and inspection inside small diameter pipelines. The robot inspection system, Tubot I, developed at Shanghai University is composed of locomotion mechanism with an inner motor, a micro CCD camera and a monitor outside the pipeline. In the paper, the kinematics and statics analyses are presented for the screw locomotion system of Tubot I. The moving characteristics are obtained from experiments on the robot prototype.
基金Supported by National Natural Science Foundation of China(Grant No.61273345)
文摘Most of the existing screw drive in-pipe robots cannot actively adjust the maximum traction capacity, which limits the adaptability to the wide range of variable environment resistance, especially in curved pipes. In order to solve this problem, a screw drive in-pipe robot based on adaptive linkage mechanism is proposed. The differential property of the adaptive linkage mechanism allows the robot to move without motion interference in the straight and varied curved pipes by adjusting inclining angles of rollers self-adaptively. The maximum traction capacity of the robot can be changed by actively adjusting the inclining angles of rollers. In order to improve the adaptability to the variable resistance, a torque control method based on the fuzzy controller is proposed. For the variable environment resistance, the proposed control method can not only ensure enough traction force, but also limit the output torque in a feasible region. In the simulations, the robot with the proposed control method is compared to the robot with fixed inclining angles of rollers. The results show that the combination of the torque control method and the proposed robot achieves the better adaptability to the variable resistance in the straight and curved pipes.
