Predicting the sinkage of a moving tracked mining vehicle using a new rheological formulation for soft deep-sea sediment

The sinkage of a moving tracked mining vehicle is greatly af fected by the combined compression-shear rheological properties of soft deep-sea sediments. For test purposes, the best sediment simulant is prepared based on soft deep-sea sediment from a C-C poly-metallic nodule mining area in the Pacific Ocean. Compressive creep tests and shear creep tests are combined to obtain compressive and shear rheological parameters to establish a combined compressive-shear rheological constitutive model and a compression-sinkage rheological constitutive model. The combined compression-shear rheological sinkage of the tracked mining vehicle at dif ferent speeds is calculated using the Recur Dyn software with a selfprogrammed subroutine to implement the combined compression-shear rheological constitutive model. The model results are compared with shear rheological sinkage and ordinary sinkage(without consideration of rheological properties). These results show that the combined compression-shear rheological constitutive model must be taken into account when calculating the sinkage of a tracked mining vehicle. The combined compression-shear rheological sinkage decrease with vehicle speed and is the largest among the three types of sinkage. The developed subroutine in the Recur Dyn software can be used to study the performance and structural optimization of moving tracked mining vehicles.

Extreme Enrichment of Tellurium in Deep-Sea Sediments

Tellurium is a sort of scattered rare element on the earth. Its concentration is very low in earth＇s crust, only 1.0 ng/g. However, it has extremely high abundance in Co-rich crusts, marine polymetallic nodules, deep-sea sediments and aerolites. To find out the origin of tellurium enrichment in deep-sea sediments, we analyzed and compared tellurium concentrations and helium isotope compositions in the magnetic parts and those in the bulk parts of deep-sea sediments. The result indicates that the helium content, 3He/4He ratio and tellurium concentration are obviously higher in the magnetic parts than those in the bulk parts. The 3He abundance varies synchronously with the tellurium concentration. 3He and Te have a distinct positive correlation with each other. It is the first time that the paper brings forward that the extreme enrichment of tellurium in deep-sea sediments, like helium isotope anomalies, probably results from the input of interplanetary dust particles （IDPs）. Similarly, the extreme enrichment of tellurium in marine polymetallic nodules and Co-rich crusts is possibly related to IDPs.

Bacterial and archaeal community structures in the Arctic deepsea sediment

Microbial community structures in the Arctic deep-sea sedimentary ecosystem are determined by organic matter input, energy availability, and other environmental factors. However, global warming and earlier ice-cover melting are affecting the microbial diversity. To characterize the Arctic deep-sea sediment microbial diversity and its relationship with environmental factors, we applied Roche 454 sequencing of 16 S r DNA amplicons from Arctic deep-sea sediment sample. Both bacterial and archaeal communities＇ richness, compositions and structures as well as taxonomic and phylogenetic affiliations of identified clades were characterized. Phylotypes relating to sulfur reduction and chemoorganotrophic lifestyle are major groups in the bacterial groups; while the archaeal community is dominated by phylotypes most closely related to the ammonia-oxidizing Thaumarchaeota（96.66%） and methanogenic Euryarchaeota（3.21%）. This study describes the microbial diversity in the Arctic deep marine sediment（〉3 500 m） near the North Pole and would lay foundation for future functional analysis on microbial metabolic processes and pathways predictions in similar environments.

Phylogenetic analysis of bacterial community in deep-sea sediment from the western Pacific “warm pool”

A depth profile of bacterial community structure in one deep-sea sediment core of the western Pacific ＂warm pool＂ （WP） was investigated and compared with that in a sediment sample from the eastern Pacific （EP） by phylogenetic analysis of 16S rDNA fragments. Five bacterial 16S rDNA clone libraries were constructed, and 133 clones with different restriction fragment length polymorphism （RFLP） patterns were sequenced. A phylogenetic analysis of these sequences revealed that the bacterial diversity in a sample from the WP was more abundant than that in the EP sample. The bacterial population in the sediment core of WP was composed of eight major lineages of the domain bacteria. Among them the γ-Proteobacteria was the predominant and most diverse group in each section of WP sediment core, followed by the α-Proteobacteria. The genus Colwellia belonging to γ-Proteobacteria was predominant in this sample. The shift of bacterial communities among different sections of the WP sediment core was δ-, ε-Proteobacteria, and Cytopahga-Flexibacteria-Bacteroides （CFB） group. The ratios between them in the bacterial communities all showed inversely proportional to the depth of sediment. The sequences related to sulphate reducing bacteria （SRB） were detected in every section. The bacterial community structure in this sediment core might be related to the environmental characteristics of the surface seawater of the western Pacific WP.

Degradation of malachite green dye by Tenacibaculum sp. HMG1isolated from Pacific deep-sea sediments

A deep-sea bacterium from the Pacific Ocean identified as Tenacibaculum sp. HMG1 was found to have strong malachite green（MG） degradation activity. The MG tolerance and decolorizing activities of strain HMG1 were confirmed by bacterial growth and high-performance liquid chromatography（HPLC） analyses. Strain HMG1 was capable of removing 98.8% of the MG in cultures within 12 h and was able to grow vigorously at 20 mg/L MG. A peroxidase gene detected in the genome of strain HMG1 was found to be involved in the MG biodegradation process. The corresponding recombinant peroxidase（r POD） demonstrated high degradative activity at 1 000 mg/L MG. Based on the common candidate intermediates, strain HMG1 was inferred to have one primary MG degradation pathway containing r POD. In addition, five other candidate intermediates of the r POD-MG degradative process were detected. The optimal conditions for MG degradation were determined and showed that strain HMG1 and the r POD enzyme could maintain high bioactivity at a low temperature（20℃）, variable p H values（6.0–9.0）, higher salinities（100 mmol/L） and other factors, such as multiple metal ions, H2O2 and EDTA.MG-tolerant strain Tenacibaculum sp. HMG1 and its peroxidase have prospective applications as environmental amendments for MG degradation during coastal remediation.

Coextraction of microbial metagenomic DNA and RNA from deep-sea sediment

A protocol to coextract the microbial metagenomic DNA and RNA from deep-sea sediment was developed for the microbiological study of environmental samples. The obtained pure metagenomic DNA with the size larger than 23 kb and stable RNA could be used directly for PCR and reverse transcription - PCR （ RT - PCR） respectively. The direct lysis including the treatments of SDS, proteinase and lysozyme was applied to acquiring the metagenomic DNA and RNA furthest. Prior to the lysis treatment, the glass bead and denaturing solution were added to enhance the lysis efficiency and keep the integrity of RNA respectively. Denaturing gradient gel electrophoresis （DGGE） was applied in accessing the microbial 16S rRNA diversity by PCR and RT -PCR amplification from a single extraction. The pattern obtained by this analysis revealed some differences between them, indicating the efficiency of the protocol in extracting the metagenomic DNA and total RNA from deep-sea sediment.

The Functions of China Marginal Sea Sediments in the Cycle of Biogenic Elements

The contents of biogenic elements in China marginal sea sediments are related to their grain sizes, river transport, et al. In general, the finer the grain size is, the higher the contents of organic matter and OC, N, P are, the lower the contents of S and Si are. The biogeochemical environments of sediments are related to Eh, pH, temperature content of OC, Fe3+/Fe2+ radio, water dynamics condition, grain size of sediment, S system in sediment interstitial waters, et al., and they influence the early diageneses and cycle of biogenic elements in sediments. In most regions of China marginal sea, the flux directions of S2-, HS-, H4SiO4, PO43-, NH4+ across the sediment-water interface are from sediment to the overlying seawater, the flux directions of SO42-, HCO3-, NO3-, NO2- across the sediment-water interface are from the overlying seawater to sediment. The irrigation of living things is important in the cycle of the biogenic elements across sediment-water interfaces.

BIOGEOCHEMICAL PROCESSES OF PHOSPHORUS AND SILICON IN SOUTHERN BOHAI SEA SURFACE SEDIMENTS

Based on the author’s previously obtained results on P and Si forms in southern Bohai Sea surface sediments,this study mainly foucusing on the controlling factors, existence forms, and biogeochemical processes of P and Si showed that the transferable forms of phosphorus in sediments were mainly controlled by the mineralization of organic matters and the reduction of high valence iron; whereas the transferable forms of silicon were possibly controlled by the dissolution and precipitation as well as biochemical processes of living organisms.

Response of bacteria in the deep-sea sediments and the Antarctic soils to carbohydrates: Effects on ectoenzyme activity and bacterial community

The response of bacteria to various carbohydrates in the deep-sea sediments and the Antarctic soils was investigated using cellulose, chitin, and olive oil. It was found that the carbohydrates significantly increased the corresponding specific ectoenzyme activity （β- glucosidase, β-N-acetylglucosaminidase, lipase） in the samples from deep-sea sediments. In the case of Antarctic soil samples, the cellulose or olive oil amendments had minor or no effect on β-glucosidase or lipase activity, except the chitin which stimulated β- N-acetylglucosaminidase production. The responses of the bacteria in the deep-sea sediment sample WP02-3 and the Antarctic soil sample CC-TY2 towards the chitin amendment were further analyzed. Chitin amendments were shown to stimulate the ectoenzyme activity in all the tested sediments and the soils. The bacterial response before and after the carbohydrates amendments were compared by denaturing gradient gel electrophoresis and quantitative competitive polymerase chain reaction. Significant changes were found in the structure and density of the bacterial community in the deep sea sediments as compared to the Antarctic soil sample, where the effects were relatively lower. There was no change in the bacterial population in both studied samples in response to carbohydrates amendments. These data indicate that the bacterial communities in the oligotrophic deep-sea sediments are more dynamic than that in the Antarctic soils as they respond to the nutrient sources efficiently by regulation of ectoenzyme activity and/or changing community structure.

Characteristics of nitrogen forms in the southern Huanghai Sea surface sediments

The distributions of different forms of nitrogen in the surface sediments of the southern Huanghai Sea are different and affected by various factors. The contents of IEF-N, SOEF-N and TN gradually decrease eastward, and those of SAEF-N northward, while those of WAEF-N westward. Around the seaport of the old Huanghe (Yellow) River, the contents of both SOEF-N and TN are the highest. Among all the factors, the content of fine sediment is the predominant factor to affect the distributions of different forms of nitrogen. The contents of IEF-N, SOEF-N, and TN have visibly positive correlation with the content of fine sediments, and the correlative coefficient is 0.68, 0.58 and 0.71 respectively, showing that the contents of the three forms of nitrogen increase with those of fine sediments. The content of WAEF-N is related to that of fine sediments to a certain extent, with a correlative coefficient of 0.35; while the content of SAEF-N is not related to that of fine sediments, showing that the content of SAEF-N is not controlled by fine grain-size fractions of sediments. In addition, the distributions of different forms of nitrogen are also interacted one another, and the contents of IEF-N and SOEF-N are obviously affected by TN, while those of inorganic nitrogen (WAEF-N, SAEF-N and IEF-N) are not affected by SOEF-N and TN obviously, although they are interacted each other.

Water purification with sintered porous materials fabricated at 400℃ from sea bottom sediments

A sintering technology for preparing porous materials from sea bottom sediments was developed for use in water purification. The purpose of the present study was to develop methods for converting the sea bottom sediments dredged from Ago Bay into value-added recycled products. The sintered products fabricated at 400℃ were found to be very effective adsorbents for the removal of heavy metals.

Simulation of Suspended Sediment in the Yellow and East China Seas

Described is an initial attempt to simulate the suspended sediment dynamics relating to tidal and wave forcing during summertime in June 1980 and August 1981 for the Yellow and East China Seas continental shelf. The cohesive/non-cohesive sediment resuspension and movement generated by the interaction between current and wave are modeled by use of ECOMSED and WAM Cycle 4. Model results are compared with observations in US-China Marine Sedimentation Dynamics Program performed for 1980-81 at off the Changjiang estuary. The main features of simulations show that suspended sediment concentrations during the summer decreased markedly offshore as observed during the simulation periods. As for some discrepancies for the mouth of the estuary with high river discharges, i.e., the Changjiang River, the model did not properly reproduce the over-mixing situation in the summer; thus distinct vertical concentration variation in this local region is not agreeable with observation. However, general dispersal patterns of suspended sediment movement seem to be agreeably reproduced for the nearshore shallow region. Some of the procedures of simulation and results are presented and discussed.

Wintertime suspended sediment simulation in the Huanghai and East China Seas

A simulation of suspended sediment movement relating to tidal and wave forcing during a winter monsoon in November 1983 in the Huanghai and East China Seas continental shelf is attempted by using the model describing the cohesive/non-cohesive sediment resus-pension generated by interactions between currents and waves.model simulation showed that sediment concentration was increased by resuspension at shallow depths during the strong storm conditions due to high bottom stress interacted between currents and waves. This result is in general agreement with observations in horizontal distribution of suspended sediment distribution. At three current meter mooring positions off the southern Shandong Peninsula resuspension occurred only at a depth of 22 m,nearest coastal position and at deeper parts at depths of 51 and 80 m wave-current interaction effects were not significant. It has shown that the present model simulation demonstrated the capability of reproduction of suspended sediment movement under wintertime extreme event reasonably well.

Spatial distribution characteristics of bacterial community structure and gene abundance in sediments of the Bohai Sea

This study investigated differences in the community structure and environmental responses of the bacterial community in sediments of the Bohai Sea.Illumina high-throughput sequencing technology and real-time PCR were used to assay the bacterial 16S rRNA genes in the surface sediments of 13 sampling stations in the Bohai Sea.The results showed that sediments at the majority of the 13 sampling stations were contaminated by heavy metal mercury.The main phyla of bacteria recorded included Proteobacteria(52.92%),Bacteroidetes(11.76%),Planctomycetes(7.39%),Acidobacteria(6.53%)and Chloroflexi(4.97%).The genus with the highest relative abundance was Desulfobulbus(4.99%),which was the dominant genus at most sampling stations,followed by Lutimonas and Halioglobus.The main factors influencing bacterial community structure were total organic carbon,followed by depth and total phosphorus.The content of lead,cadmium,chromium,copper and zinc had a consistent effect on community structure.Arsenic showed a negative correlation with bacterial community structure in most samples,while the impact of mercury on community structure was not significant.The bacterial community in sediment samples from the Bohai Sea was rich in diversity and displayed an increase in diversity from high to low latitudes.The data indicated that the Bohai Sea had abundant microbial resources and was rich in bacteria with the potential to metabolize many types of pollutants.

Research on Pressure Tight Sampling Technique of Deep-Sea Shallow Sediment—A New Approach to Gas Hydrate Investigation

Analyzed and calculated are pressure changes and body deformation of the sample inside of the corer in the process of sampling of deep-sea shallow sediment with a non-piston corer for gas hydrate investigation, Two conclusions are drawn： （1） the stress increments associated with the corer through the sampling process do not affect the stabilization of the gas hydrate; （2） the body deformation of the sample is serious and the ＂incremental filling ratio＂ （IFR） is less than unit, For taking samples with in-situ pressure and structure, combining with the design theories of the pressure tight corer, we have designed a kind of piston corer, named the gas hydrate pressure tight piston corer, Several tests on the sea have been conducted. Test results indicate that the piston corer has a good ability of taking sediment samples on the seafloor and maintaining their original in-situ pressure, meeting the requirement of exploration of gas hydrate in deep-sea shallow sediment layers.

Nitrogen forms and decomposition of organic carbon in the southern Bohai Sea core sediments

Study on form characteristics of nitrogen in marine sediments is the primary method to research its biogeochemical cycling and nitrogen form characteristics in core sediments can reflect the process and results of early diagenesis in a certain degree. In this paper, Sequential extraction process in natural grain size was used for studying the existent forms of nitrogen in five core sediments of the southern Bohai Sea for the first time. Nitrogen was divided into two parts - transferable and fixed based on whether it could be extracted by the reagent. Distributions and early diagenesis of transferable nitrogen forms in the southern Bohai Sea were researched integratedly. Results indicate that IEF - N and OSF-N are predominant forms in transferable part in the studied core sediments. Contents of different nitrogen forms vary differently with depth, and have different diagenesis process. Decomposition constant of organic nitrogen (ON) and OC are about 15.51 -× 10^(-3)a^(-3)and 4.79× 10^(-3)a^(-1) respectively, and the decomposition content of biogenic elements C, N, P, Si has the sequence N>P>CSi. OC/TN (simplified as C/N in the following) ratio is much lower than OC/ON, which indicates that sediment preserves plenty of inorganic nitrogen (IN) and/or fixed nitrogen, and the decrease of OC/ON ratio with depth is due to ON reservation in sediments. Generally, transferable nitrogen accounts for more proportion of TN in the surface layer than in the deep layer of core sediments, whereas, some stable forms of nitrogen can activate and become transferable under appropriate environment, which induces the proportion of transferable nitrogen in TN in the deep layer to be almost the same as that in the surface layer.

Application of biologic silicon in modern sedimentary section to reconstruction of phytoplankton changes in the East China Sea and the Huanghai Sea during last 200 years

Biomarkers had been widely used to reconstruct phytoplankton productivity, and this method was applied in the East China Sea and the Huanghai Sea （Yellow Sea）. In this study, Biologic Silicon （BSi） was used as productivity proxy to reconstruct productivity change of phytoplankton during last 200 years. The results show that the BSi contents of surficial＇sediments were in the range of 0.018%-2.516%, averaging 0.726%, and had a similar variation trend with phytoplankton biomass. The vertical distribution profiles revealed that BSi contents were relatively stable, in accordance with the variations of the contemporary phytoplankton standing crop index. According to the stability analysis of BSi in sediments, BSi was not degradaded for the past two hundred years and remained in sediments steadily. Thus, BSi in sediments had the potential to invert paleoproductivity. To conduct further survey, the linear regression equation between BSi contents and phytoplankton biomass index could be used to calculate the phytoplankton productivity by BSi, so that paleoproduetivity may be reconstructed during last 200 years.

SEDIMENT DISCHARGE OF THE HUANGHE RIVER AND ITS EFFECT ON SEDIMENTATION OF THE BOHAI SEA AND THE YELLOW SEA

The Huanghe (Yellow) River, with annual sediment discharge about 11 ×108tons, contributes about 17% of the fluvial sediment discharge of world’s 21 major rivers to the ocean because its middle reaches flow across the great Loess Plateau of China. Sediment discharge of the Huanghe River has a widespread and profound effect on sedimentation of the sea. The remarkable shift of its outlet in 1128-1855 A.D. to the South Yellow Sea formed a large subaqueous delta and provided the substrate for an extensive submarine ridge field.The shift of its outlet in the modern delta every 10 years is the main reason why with an extremely heavy sediment input and a micro- tidal environment, the Huanghe River has not succeeded in building a birdfoot delta like the Mississippi. The Huanghe River has consistently brought heavy sediment input to sea at least since 0.7 myr.B.P. Paleochannels, paleosols, cheniers and fossils on the sea bottom indicate that the Yellow Sea was exposed during the late Quaternary glacial low-sea

Millennial climate changes since MIS 3 revealed by element records in deep-sea sediments from northern South China Sea

High resolution elemental records in core MD05-2903 from the northern South China Sea were obtained from XRF scanning and grain size and mineral component analyses.The K/Ti curve reveals climate changes since MIS 3 on a millennial scale,representing one of the best such records so far from deep-sea sediments of the South China Sea.When compared our K/Ti record with other climate records from high latitude ice cores and from East Asia stalagmites,variations in the K/Ti record show some typical saw-shaped features of rapid climate changes in the Northern Hemisphere.Grain size analysis reveals a close relationship between variations in K/Ti and in the fine end-member grain size.XRD analysis confirms that high K/Ti layers were dominated by K-rich weathering minerals,especially illite,while low K/Ti layers contain low illite but high abundance of Ti-rich heavy minerals.Therefore,the K/Ti record reflects changes in the input and deposition of fine weathering minerals and heavy minerals in the northern South China Sea region during stadials and interstadials.These elemental changes were largely controlled by variations in rainfall,erosion,and fluvial transportation induced by East Asia Monsoon.

Study on the Thermal Insulation Performance of a New Seabed Sediment Fidelity Sampler Based on ANSYS

A new seabed sediment fidelity sampler was developed and its thermal insulation performance was studied and analyzed. The temperature distribution simulation indicated that the sample quality could be insured by using this new sampler. Based on ANSYS10, the temperature finite element model of the sample cylinder was established. According to the law of conservation of energy, the unsteady heat transmit equation of the sampler under solid-liquid coupling condition was derived, then the mathematical model calculation was carried out by using a mixed finite-element finite-difference method, and two thermal insulation methods were used. The simulation was carried out by using the thickness of the thermal insulation layer and heat conductivity as the variable parameters and the temperature distribution of the sampler and related influencing factors were obtained. Optimization analysis was conducted using the simulation data and related parameters and the magnitude ranges of the parameters were obtained that could meet the design temperature requirements. The experimental data and simulation results indicated that the results were in good agreement with the realities, and this sampler might be of value for seabed sediment sampler design and manufacture.