Quantitative characterization of sealing integrity by caprock of Paleocene Artashi Formation gypsolyte rock in Kashi Sag of Tarim Basin, NW China

Maintaining caprock integrity is prerequisite for hydrocarbon accumulation. And gypsolyte caprock integrity is mainly affected by fracturing. Composition, damage behavior and mechanical strength of Paleocene Artashi Formation gypsolyte rock that seals significant petroleum in the Kashi Sag of Tarim Basin had been revealed via X-ray diffraction and triaxial compression test. The results indicate the Artashi Formation can be lithologically divided into the lower and upper lithologic members. The lower member comprises gypsum as the dominant mineral, and the cohesion and friction coefficient are 8 MPa and 0.315, respectively. Similarly, the upper lithologic member consists mainly of anhydrite at the cohesion and coefficient of internal friction values of 18 MPa and 0.296. Given that the failure criterion and brittle-ductile transition factors during burial, the sealing integrity of Artashi Formation can be quantized for seven different stages. The reservoirs at the bottom of Artashi Formation caprock buried from 2285 m to 3301 m are expected to be the most favorable exploration target in the Kashi Sag.

Sealing of Ejection Hole at the Bottom of Projectile for Wired Transmission System of Penetration Data

It is difficult to find the projectile when people want to get the penetration data in a hard recovery method,so a recovery system of penetration data is designed based on an ejection mode from the projectile base and a method of wired transmission,at the same time,the system was sealed with a designed sealing device,the working principle of which was introduced.Using Fluent as the simulation platform,the transient pressure of seal cavity was simulated based on the change of chamber pressure,and steady-state pressure of seal clearance and seal cavity were simulated based on the maximum chamber pressure.The sealing performance was tested by apressure test system.The results of simulation and experiment show that the maximum pressure of seal cavity is 139.4kPa when the maximum chamber pressure is 242.9MPa and the maximum temperature of gunpowder explosive gas is2 166.5K,so the sealing performance can be assured.The sealing device can be taken as a reference in sealing research on gunpowder gas at the bottom of projection.

Calculating the formation period of fault lateral sealing and its application

The study aims to find out the formation period of fault traps near faults in petroliferous basins,based on an analysis of the formation period of fault lateral sealing and related influential factors.A method to calculate the formation period of fault lateral sealing(i.e.the time when displacement pressure of fault rock is equal to that of reservoir rock in fault wall with hydrocarbon migration)is established by comparing the relationship between displacement pressure and time for fault rock and reservoir rock.This method is then applied to the study on reservoirs in the 1^(st),2^(nd),and 3^(rd) members of Dongying Formation(E_(3)d^(1),E_(3)d^(2) and E_(3)d^(3))in terms of formation period of lateral sealing of F3 fault crossing the three reservoirs in the No.5 structure of Nanpu Sag in Bohai Bay Basin.The results indicate that the formation period of the lateral sealing in the studied reservoirs can date from 7.1 Ma,7.4 Ma and 9.2 Ma respectively,all prior to the hydrocarbon accumulation period(about 2.58 Ma).Hence,it can be concluded that these reservoirs are favorable for the accumulation and preservation of hydrocarbons generated from the underlying source rock E_(3)s^(3),and the method proposed is feasible in calculating the formation period of fault lateral sealing.

Application of 9-component S-wave 3D seismic data to study sedimentary facies and reservoirs in a biogasbearing area:A case study on the Pleistocene Qigequan Formation in Taidong area,Sanhu Depression,Qaidam Basin,NW China

To solve the problems in restoring sedimentary facies and predicting reservoirs in loose gas-bearing sediment,based on seismic sedimentologic analysis of the first 9-component S-wave 3D seismic dataset of China,a fourth-order isochronous stratigraphic framework was set up and then sedimentary facies and reservoirs in the Pleistocene Qigequan Formation in Taidong area of Qaidam Basin were studied by seismic geomorphology and seismic lithology.The study method and thought are as following.Firstly,techniques of phase rotation,frequency decomposition and fusion,and stratal slicing were applied to the 9-component S-wave seismic data to restore sedimentary facies of major marker beds based on sedimentary models reflected by satellite images.Then,techniques of seismic attribute extraction,principal component analysis,and random fitting were applied to calculate the reservoir thickness and physical parameters of a key sandbody,and the results are satisfactory and confirmed by blind testing wells.Study results reveal that the dominant sedimentary facies in the Qigequan Formation within the study area are delta front and shallow lake.The RGB fused slices indicate that there are two cycles with three sets of underwater distributary channel systems in one period.Among them,sandstones in the distributary channels of middle-low Qigequan Formation are thick and broad with superior physical properties,which are favorable reservoirs.The reservoir permeability is also affected by diagenesis.Distributary channel sandstone reservoirs extend further to the west of Sebei-1 gas field,which provides a basis to expand exploration to the western peripheral area.

Developing a Geological Management Information System: National Important Mining Zone Database

Geo-data is a foundation for the prediction and assessment of ore resources, so managing and making full use of those data, including geography database, geology database, mineral deposits database, aeromagnetics database, gravity database, geochemistry database and remote sensing database, is very significant. We developed national important mining zone database （NIMZDB） to manage 14 national important mining zone databases to support a new round prediction of ore deposit. We found that attention should be paid to the following issues： ① data accuracy： integrity, logic consistency, attribute, spatial and time accuracy; ② management of both attribute and spatial data in the same system;③ transforming data between MapGIS and ArcGIS; ④ data sharing and security; ⑤ data searches that can query both attribute and spatial data. Accuracy of input data is guaranteed and the search, analysis and translation of data between MapGIS and ArcGIS has been made convenient via the development of a checking data module and a managing data module based on MapGIS and ArcGIS. Using AreSDE, we based data sharing on a client/server system, and attribute and spatial data are also managed in the same system.

Integration of Building Maintenance Data in Application of Building Information Modeling (BIM)

A typical building project has a long life in the maintenance stage. Also, the cost at this stage is enormously huge compared to planning, design and construction phases. In the earlier stage, which is planning or design phase, however, many project participants put little emphasis on the maintenance information. As a result, important maintenance data is missing and erroneously feedback to the 3D/BIM model. This research provides a generic process model for maintenance information management for building facilities. The authors have identified that there exist most-frequently used information areas: checking information, material information, equipment information, supplier information, and maintenance history information. Each information area should be embedded in the BIM model in order to effectively feedback to the operation and maintenance stage in the project. Thus, the study has proposed a novel data format structure which can effectively link the 3D/BIM object with the maintenance data. The demonstration project shows how the data format structure is used. The contribution of this study is to provide guidance to a project practitioner by step-by-step approach in dealing with the significant maintenance information in the earlier stage of the construction project.

Research on high energy efficiency and low bit-width floating-point type data for abnormal object detection of transmission lines

Achieving a balance between accuracy and efficiency in target detection applications is an important research topic.To detect abnormal targets on power transmission lines at the power edge,this paper proposes an effective method for reducing the data bit width of the network for floating-point quantization.By performing exponent prealignment and mantissa shifting operations,this method avoids the frequent alignment operations of standard floating-point data,thereby further reducing the exponent and mantissa bit width input into the training process.This enables training low-data-bit width models with low hardware-resource consumption while maintaining accuracy.Experimental tests were conducted on a dataset of real-world images of abnormal targets on transmission lines.The results indicate that while maintaining accuracy at a basic level,the proposed method can significantly reduce the data bit width compared with single-precision data.This suggests that the proposed method has a marked ability to enhance the real-time detection of abnormal targets in transmission circuits.Furthermore,a qualitative analysis indicated that the proposed quantization method is particularly suitable for hardware architectures that integrate storage and computation and exhibit good transferability.

ISODATA在油水层综合判别中的应用

针对油藏地质中油水层判别问题,提出了一套利用测井资料综合判别油水层的ISODATA方法,建立了此方法的数学模型,并编制了相应的软件。运用该方法对地质情况复杂的海拉尔盆地乌尔逊地区的测井资料进行处理,总符合率达88.0%。结果表明该方法可提高油水层识别的精度。

基于GeodataBase的CAD数据到GIS的解决方案

由于CAD系统与GIS在数据结构上存在着较大的差异,这使得其数据往往不能很好地满足GIS的要求。本文在分析目前CAD数据到GIS数据转换存在问题的基础上,利用ARCGIS的GeodataBase数据模型,探讨了基础地形图和规划CAD数据在转入GIS数据库中的逻辑组织、分层设计和属性设计等解决方案。但要从根本上解决CAD数据到GIS格式数据的转换的问题,还是需要一个“国家空间数据格式标准规范”的出台。

Deep original information preservation by applying in-situ film formation technology during coring

Accurately obtaining the original information of an in-situ rock via coring is a significant guiding step for exploring and developing deep oil and gas resources.It is difficult for traditional coring technology and equipment to preserve the original information in deep rocks.This study develops a technology for insitu substance-preserved(ISP),moisture-preserved(IMP),and light-preserved(ILP)coring.This technology stores the original information in real time by forming a solid sealing film on the in-situ sample during coring.This study designed the ISP-IMP-ILP-Coring process and tool.In addition,an ISP-IMP-ILPCoring process simulation system was developed.The effects of temperature,pressure,and film thickness on the quality of the in-situ film were investigated by performing in-situ film-forming simulation experiments.A solid sealing film with a thickness of 2-3 mm can be formed;it completely covers the core sample and has uniform thickness.The film maintains good ISP-IMP-ILP properties and can protect the core sample in the in-situ environment steadily.This study verifies the feasibility of“film formation during coring”technology and provides strong support for the engineering application of ISP-IMP-ILPCoring technology.

基于Geodatabase的CAD数据到GIS的解决方法

由于CAD系统与GIS在数据结构上存在着较大的差异,这使得其数据往往不能很好地满足GIS的要求。本文在分析目前CAD数据到GIS数据转换存在问题的基础上,利用ArcGIS的Geodatabase数据模型,探讨了基础地形图和规划CAD数据在转入GIS数据库中的逻辑组织、分层设计和属性设计等解决方案。但要从根本上解决CAD数据到GIS格式数据的转换的问题,还是需要一个“国家空间数据格式标准规范”的出台。

Gulong shale oil enrichment mechanism and orderly distribution of conventional–unconventional oils in the Cretaceous Qingshankou Formation,Songliao Basin,NE China

Through the study of organic matter enrichment,hydrocarbon generation and accumulation process of black shale of the Cretaceous Qingshankou Formation in the Songliao Basin,the enrichment mechanism of Gulong shale oil and the distribution of conventional–unconventional oil are revealed.The Songliao Basin is a huge interior lake basin formed in the Early Cretaceous under the control of the subduction and retreat of the western Pacific plate and the massive horizontal displacement of the Tanlu Fault Zone in Northeast China.During the deposition of the Qingshankou Formation,strong terrestrial hydrological cycle led to the lake level rise of the ancient Songliao Basin and the input of a large amount of nutrients,resulting in planktonic bacteria and algae flourish.Intermittent seawater intrusion events promoted the formation of salinization stratification and anoxic environment in the lake,which were beneficial to the enrichment of organic matters.Biomarkers analysis confirms that the biogenic organic matter of planktonic bacteria and algae modified by microorganisms plays an important role in the formation of high-quality source rocks with high oil generation capability.There are four favorable conditions for the enrichment of light shale oil in the Qingshankou Formation of the Gulong Sag,Songliao Basin:the moderate organic matter abundance and high oil potential provide sufficient material basis for oil enrichment;high degree of thermal evolution makes shale oil have high GOR and good mobility;low hydrocarbon expulsion efficiency leads to a high content of retained hydrocarbons in the source rock;and the confinement effect of intra-layer cement in the high maturity stage induces the efficient accumulation of light shale oil.The restoration of hydrocarbon accumulation process suggests that liquid hydrocarbons generated in the early(low–medium maturity)stage of the Qingshankou Formation source rocks accumulated in placanticline and slope after long-distance secondary migration,forming high-quality conventional and tight oil reservoirs.Light oil generated in the late(medium–high maturity)stage accumulated in situ,forming about 15 billion tons of Gulong shale oil resources,which finally enabled the orderly distribution of conventional–unconventional oils that are contiguous horizontally and superposed vertically within the basin,showing a complete pattern of“whole petroleum system”with conventional oil,tight oil and shale oil in sequence.

A formation pressure prediction method based on tectonic overpressure

Traditional formation pressure prediction methods all are based on the formation undercompaction mechanism and the prediction results are obviously low when predicting abnormally high pressure caused by compressional structure overpressure.To eliminate this problem,we propose a new formation pressure prediction method considering compressional structure overpressure as the dominant factor causing abnormally high pressure.First,we establish a model for predicting maximum principal stress,this virtual maximum principal stress is calculated by a double stress field analysis.Then we predict the formation pressure by fitting the maximum principal stress with formation pressure. The real maximum principal stress can be determined by caculating the sum of the virtual maximum principal stresses.Practical application to real data from the A1 and A2 wells in the A gas field shows that this new method has higher accuracy than the traditional equivalent depth method.

基于Geodatabase的CAD数据到GIS的解决方案

由于CAD系统与GIS在数据结构上存在着较大的差异,这使得其数据往往不能很好地满足GIS的要求。本文在分析目前CAD数据到GIS数据转换存在问题的基础上,利用ARCGIS的Geodatabase数据模型,探讨了基础地形图和规划CAD数据在转入GIS数据库中的逻辑组织、分层设计和属性设计等解决方案。但要从根本上解决CAD数据到GIS格式数据的转换的问题,还是需要一个“国家空间数据格式标准规范”的出台。

An Examination of the Predictability of Tropical Cyclone Genesis in High-Resolution Coupled Models with Dynamically Downscaled Coupled Data Assimilation Initialization

Predicting tropical cyclone(TC)genesis is of great societal importance but scientifically challenging.It requires fineresolution coupled models that properly represent air−sea interactions in the atmospheric responses to local warm sea surface temperatures and feedbacks,with aid from coherent coupled initialization.This study uses three sets of highresolution regional coupled models(RCMs)covering the Asia−Pacific(AP)region initialized with local observations and dynamically downscaled coupled data assimilation to evaluate the predictability of TC genesis in the West Pacific.The APRCMs consist of three sets of high-resolution configurations of the Weather Research and Forecasting−Regional Ocean Model System(WRF-ROMS):27-km WRF with 9-km ROMS,and 9-km WRF with 3-km ROMS.In this study,a 9-km WRF with 9-km ROMS coupled model system is also used in a case test for the predictability of TC genesis.Since the local sea surface temperatures and wind shear conditions that favor TC formation are better resolved,the enhanced-resolution coupled model tends to improve the predictability of TC genesis,which could be further improved by improving planetary boundary layer physics,thus resolving better air−sea and air−land interactions.

Data Transfer Over the Internet for Real Time Applications

Efficient real time data exchange over the Internet plays a crucial role in the successful application of web-based systems. In this paper, a data transfer mechanism over the Internet is proposed for real time web based applications. The mechanism incorporates the eXtensible Markup Language （XML） and Hierarchical Data Format （HDF） to provide a flexible and efficient data format. Heterogeneous transfer data is classified into light and heavy data, which are stored using XML and HDF respectively; the HDF data format is then mapped to Java Document Object Model （JDOM） objects in XML in the Java environment. These JDOM data objects are sent across computer networks with the support of the Java Remote Method Invocation （RMI） data transfer infrastructure. Client＇s defined data priority levels are implemented in RMI, which guides a server to transfer data objects at different priorities. A remote monitoring system for an industrial reactor process simulator is used as a case study to illustrate the proposed data transfer mechanism.

Redefining the Age of the Cenozoic Shanwang Formation in Shanwang Basin

The Shanwang Basin is a small Cenozoic sedimentary basin located in Linqu county, Shandong province.The Shanwang Formation, especially the diatomaceous shale member, contains diverse and finely preserved flora and fauna fossils （Fig. 1）. Previous paleontological study and radiometric dating show that it was formed in the Miocene. However, on the precise age of the formation, there are such different opinions as Late Miocene, Middle Miocene, Early stage of Middle Miocene, etc.

Model Based Data Transmission: Analysis of Link Budget Requirement Reduction

Communications capability can be a significant constraint on the utility of a spacecraft. While conventionally enhanced through the use of a larger transmitting or receiving antenna or through augmenting transmission power, communications capability can also be enhanced via incorporating more data in every unit of transmission. Model Based Transmission Reduction (MBTR) increases the mission utility of spacecraft via sending higher-level messages which rely on preshared (or, in some cases, co-transmitted) data. Because of this a priori knowledge, the amount of information contained in a MBTR message significantly exceeds the amount the amount of information in a conventional message. MBTR has multiple levels of operation;the lowest, Model Based Data Transmission (MBDT), utilizes a pre-shared lower-resolution data frame, which is augmented in areas of significant discrepancy with data from the higher-resolution source. MBDT is examined, in detail, herein and several approaches to minimizing the required bandwidth for conveying data required to conform to a minimum level of accuracy are considered. Also considered are ways of minimizing transmission requirements when both a model and change data required to attain a desired minimum discrepancy threshold must be transmitted. These possible solutions are compared to alternate transmission techniques including several forms of image compression.

An Optimization Method of Formation Flight for Minimizing Fuel Consumption

A method for formation flight trajectory optimization was established.This method aims at minimizing fuel consumption of a two-aircraft formation flight,without changing the original trajectory of the leader.Candidate flight pairs were selected from all international flights arriving at or departing from China in one day according to the requirement of the proposed method.Aircraft performance database Base of Aircraft Data(BADA)was employed in the trajectory computation.By assuming different fuel-saving percentages for the following aircraft,pre-flight plan trajectories of formation flight were optimized.The fuel consumption optimization effect under the influence of different trajectory optimization parameters was also analyzed.The results showed that the higher the fuel savings percentage,the longer the flight distance of formation flight,but the smaller the number of formation combinations that can be realized,which is limited by the aircraft performance.The following aircraft flying along the approximate actual flight trajectory can be benefited as well,and the optimal fuel-saving efficiency is related to the expected fuelsaving efficiency of formation flight.

Heuristic Approaches for Cell Formation in Cellular Manufacturing

Cellular Manufacturing System (CMS) is an application of Group Technology (GT) that allows decomposing a manu-facturing system into subsystems. Grouping the machines and parts in a cellular manufacturing system, based on simi-larities is known as cell formation problem (CFP) which is an NP-hard problem. In this paper, a mathematical model is proposed for CFP and is solved using the Ant Colony Optimization (ACO), Genetic Algorithm (GA) and Simulated Annealing (SA) meta-heuristic methods and the results are compared. The computational results show that the GA method is more effective in solving the model.