A novel identification method for point source,coherently distributed（CD） source and incoherently distributed（ICD） source is proposed.The differences among the point source,CD source and ICD source are studied.Acc...A novel identification method for point source,coherently distributed（CD） source and incoherently distributed（ICD） source is proposed.The differences among the point source,CD source and ICD source are studied.According to the different characters of covariance matrix and general steering vector of the array received source,a second order blind identification method is used to separate the sources,the mixing matrix could be obtained.From the mixing matrix,the type of the source is identified by using an amplitude criterion.And the direction of arrival for the array received source is estimated by using the matching pursuit algorithm from the vectors of the mixing matrix.Computer simulations validate the efficiency of the method.展开更多
A modal identification algorithm is developed, combining techniques from Second Order Blind Source Separation (SOBSS) and State Space Realization (SSR) theory. In this hybrid algorithm, a set of correlation matrices i...A modal identification algorithm is developed, combining techniques from Second Order Blind Source Separation (SOBSS) and State Space Realization (SSR) theory. In this hybrid algorithm, a set of correlation matrices is generated using time-shifted, analytic data and assembled into several Hankel matrices. Dissimilar left and right matrices are found, which diagonalize the set of nonhermetian Hankel matrices. The complex-valued modal matrix is obtained from this decomposition. The modal responses, modal auto-correlation functions and discrete-time plant matrix (in state space modal form) are subsequently identified. System eigenvalues are computed from the plant matrix to obtain the natural frequencies and modal fractions of critical damping. Joint Approximate Diagonalization (JAD) of the Hankel matrices enables the under determined (more modes than sensors) problem to be effectively treated without restrictions on the number of sensors required. Because the analytic signal is used, the redundant complex conjugate pairs are eliminated, reducing the system order (number of modes) to be identified half. This enables smaller Hankel matrix sizes and reduced computational effort. The modal auto-correlation functions provide an expedient means of screening out spurious computational modes or modes corresponding to noise sources, eliminating the need for a consistency diagram. In addition, the reduction in the number of modes enables the modal responses to be identified when there are at least as many sensors as independent (not including conjugate pairs) modes. A further benefit of the algorithm is that identification of dissimilar left and right diagonalizers preclude the need for windowing of the analytic data. The effectiveness of the new modal identification method is demonstrated using vibration data from a 6 DOF simulation, 4-story building simulation and the Heritage court tower building.展开更多
A new blind method is proposed for identification of CDMA Time-Varying (TV)channels in this paper. By representing the TV channel's impulse responses in the delay-Doppler spread domain, the discrete-time canonical...A new blind method is proposed for identification of CDMA Time-Varying (TV)channels in this paper. By representing the TV channel's impulse responses in the delay-Doppler spread domain, the discrete-time canonical model of CDMA-TV systems is developed and a subspace method to identify blindly the Time-Invariant (TI) coordinates is proposed. Unlike existing basis expansion methods, this new algorithm does not require .estimation of the base frequencies, neither need the assumption of linearly varying delays across symbols. The algorithm offers definite explanation of the expansion coordinates. Simulation demonstrates the effectiveness of the algorithm.展开更多
To improve the deteriorated capacity gain and source recovery performance due to channel mismatch problem,this paper reports a research about blind separation method against channel mismatch in multiple-input multiple...To improve the deteriorated capacity gain and source recovery performance due to channel mismatch problem,this paper reports a research about blind separation method against channel mismatch in multiple-input multiple-output(MIMO) systems.The channel mismatch problem can be described as a channel with bounded fluctuant errors due to channel distortion or channel estimation errors.The problem of blind signal separation/extraction with channel mismatch is formulated as a cost function of blind source separation(BSS) subject to the second-order cone constraint,which can be called as second-order cone programing optimization problem.Then the resulting cost function is solved by approximate negentropy maximization using quasi-Newton iterative methods for blind separation/extraction source signals.Theoretical analysis demonstrates that the proposed algorithm has low computational complexity and improved performance advantages.Simulation results verify that the capacity gain and bit error rate(BER) performance of the proposed blind separation method is superior to those of the existing methods in MIMO systems with channel mismatch problem.展开更多
This letter deals with blind identification of nonlinear discrete Hammerstein system under the input signal that is cyclostationary. The first-order moment of the specific input as well as the inverse nonlinear mappin...This letter deals with blind identification of nonlinear discrete Hammerstein system under the input signal that is cyclostationary. The first-order moment of the specific input as well as the inverse nonlinear mapping of the Hammerstein model are combined to establish a relationship between the system output and the system parameters, which implies an approach to identifying the system blindly. Simulation results demonstrate the effectiveness of this approach to blind identification of a class of nonlinear systems.展开更多
Noise artifacts are one of the key obstacles in applying continuous monitoring and computer-assisted analysis of lung sounds. Traditional adaptive noise cancellation (ANC) methodologies work reasonably well when signa...Noise artifacts are one of the key obstacles in applying continuous monitoring and computer-assisted analysis of lung sounds. Traditional adaptive noise cancellation (ANC) methodologies work reasonably well when signal and noise are stationary and independent. Clinical lung sound auscultation encounters an acoustic environment in which breath sounds are not stationary and often correlate with noise. Consequendy, capability of ANC becomes significantly compromised. This paper introduces a new methodology for extracting authentic lung sounds from noise-corrupted measurements. Unlike traditional noise cancellation methods that rely on either frequency band separation or signal/noise independence to achieve noise reduction, this methodology combines the traditional noise canceling methods with the unique feature of time-split stages in breathing sounds. By employing a multi-sensor system, the method first employs a high-pass filter to eliminate the off-band noise, and then performs time-shared blind identification and noise cancellation with recursion from breathing cycle to cycle. Since no frequency separation or signal/noise independence is required, this method potentially has a robust and reliable capability of noise reduction, complementing the traditional methods.展开更多
This paper is concerned with distributed fault detection of second-order discrete-time multi-agent systems with adversary,where the adversary is regarded as a slowly time-varying signal.Firstly,a novel intrusion detec...This paper is concerned with distributed fault detection of second-order discrete-time multi-agent systems with adversary,where the adversary is regarded as a slowly time-varying signal.Firstly,a novel intrusion detection scheme based on the theory of unknown input observability( UIO) is proposed. By constructing a bank of UIO,the states of the malicious agents can be directly estimated. Secondly,the faulty-node-removal algorithm is provided.Simulations are also provided to demonstrate the effectiveness of the theoretical results.展开更多
We present an adaptive algorithm for blind identification and equalization of single-input multiple-output （SIMO） FIR channels with second-order statistics. We first reformulate the blind channel identification prob...We present an adaptive algorithm for blind identification and equalization of single-input multiple-output （SIMO） FIR channels with second-order statistics. We first reformulate the blind channel identification problem into a low-rank matrix approximation solution based on the QR decomposition of the received data matrix. Then, a fast recursive algorithm is developed based on the bi-iterative least squares （Bi-LS） subspace tracking method. The new algorithm requires only a computational complexity of O（md2） at each iteration, or even as low as O（md） if only equalization is necessary, where m is the dimension of the received data vector （or the row rank of channel matrix） and d is the dimension of the signal subspace （or the column rank of channel matrix）. To overcome the shortcoming of the back substitution, an inverse QR iteration algorithm for subspace tracking and channel equalization is also developed. The inverse QR iteration algorithm is well suited for the parallel implementation in the systolic array. Simulation results are presented to illustrate the effectiveness of the proposed algorithms for the channel identification and equalization.展开更多
This paper presents a novel approach to structure determination of linear systems along with the choice of system orders and parameters. AutoRegressive （AR）, Moving Average （MA） or AutoRegressive-Moving Average （...This paper presents a novel approach to structure determination of linear systems along with the choice of system orders and parameters. AutoRegressive （AR）, Moving Average （MA） or AutoRegressive-Moving Average （ARMA） model structure can be extracted blindly from the Third Order Cumulants （TOC） of the system output ts, where the unknown system is driven by an unobservable stationary independent identically distributed （i.i.d.） non-Gaussian signal. By means of the system order recursion, whether the system has an AR structure or has AR part of an ARMA structure is firstly investigated. MA features in the TOC domain is then applied as a threshold to decide if the system is an MA model or has MA part of an ARMA model. Numerical simulations illustrate the generality of the proposed blind structure identification methodology that may serve as a guideline for blind, linear system modeling.展开更多
The existing methods for identifying recursive systematic convolutional encoders with high robustness require to test all the candidate generator matrixes in the search space exhaustively.With the increase of the code...The existing methods for identifying recursive systematic convolutional encoders with high robustness require to test all the candidate generator matrixes in the search space exhaustively.With the increase of the codeword length and constraint length,the search space expands exponentially,and thus it limits the application of these methods in practice.To overcome the limitation,a novel identification method,which gets rid of exhaustive test,is proposed based on the cuckoo search algorithm by using soft-decision data.Firstly,by using soft-decision data,the probability that a parity check equation holds is derived.Thus,solving the parity check equations is converted to maximize the joint probability that parity check equations hold.Secondly,based on the standard cuckoo search algorithm,the established cost function is optimized.According to the final solution of the optimization problem,the generator matrix of recursive systematic convolutional code is estimated.Compared with the existing methods,our proposed method does not need to search for the generator matrix exhaustively and has high robustness.Additionally,it does not require the prior knowledge of the constraint length and is applicable in any modulation type.展开更多
The problem of blind adaptive equalization of underwater single-input multiple-output (SIMO) acoustic channels was analyzed by using the linear prediction method.Minimum mean square error (MMSE) blind equalizers with ...The problem of blind adaptive equalization of underwater single-input multiple-output (SIMO) acoustic channels was analyzed by using the linear prediction method.Minimum mean square error (MMSE) blind equalizers with arbitrary delay were described on a basis of channel identification.Two methods for calculating linear MMSE equalizers were proposed.One was based on full channel identification and realized using RLS adaptive algorithms,and the other was based on the zero-delay MMSE equalizer and realized using LMS and RLS adaptive algorithms,respectively.Performance of the three proposed algorithms and comparison with two existing zero-forcing (ZF) equalization algorithms were investigated by simulations utilizing two underwater acoustic channels.The results show that the proposed algorithms are robust enough to channel order mismatch.They have almost the same performance as the corresponding ZF algorithms under a high signal-to-noise (SNR) ratio and better performance under a low SNR.展开更多
文摘A novel identification method for point source,coherently distributed（CD） source and incoherently distributed（ICD） source is proposed.The differences among the point source,CD source and ICD source are studied.According to the different characters of covariance matrix and general steering vector of the array received source,a second order blind identification method is used to separate the sources,the mixing matrix could be obtained.From the mixing matrix,the type of the source is identified by using an amplitude criterion.And the direction of arrival for the array received source is estimated by using the matching pursuit algorithm from the vectors of the mixing matrix.Computer simulations validate the efficiency of the method.
文摘A modal identification algorithm is developed, combining techniques from Second Order Blind Source Separation (SOBSS) and State Space Realization (SSR) theory. In this hybrid algorithm, a set of correlation matrices is generated using time-shifted, analytic data and assembled into several Hankel matrices. Dissimilar left and right matrices are found, which diagonalize the set of nonhermetian Hankel matrices. The complex-valued modal matrix is obtained from this decomposition. The modal responses, modal auto-correlation functions and discrete-time plant matrix (in state space modal form) are subsequently identified. System eigenvalues are computed from the plant matrix to obtain the natural frequencies and modal fractions of critical damping. Joint Approximate Diagonalization (JAD) of the Hankel matrices enables the under determined (more modes than sensors) problem to be effectively treated without restrictions on the number of sensors required. Because the analytic signal is used, the redundant complex conjugate pairs are eliminated, reducing the system order (number of modes) to be identified half. This enables smaller Hankel matrix sizes and reduced computational effort. The modal auto-correlation functions provide an expedient means of screening out spurious computational modes or modes corresponding to noise sources, eliminating the need for a consistency diagram. In addition, the reduction in the number of modes enables the modal responses to be identified when there are at least as many sensors as independent (not including conjugate pairs) modes. A further benefit of the algorithm is that identification of dissimilar left and right diagonalizers preclude the need for windowing of the analytic data. The effectiveness of the new modal identification method is demonstrated using vibration data from a 6 DOF simulation, 4-story building simulation and the Heritage court tower building.
文摘A new blind method is proposed for identification of CDMA Time-Varying (TV)channels in this paper. By representing the TV channel's impulse responses in the delay-Doppler spread domain, the discrete-time canonical model of CDMA-TV systems is developed and a subspace method to identify blindly the Time-Invariant (TI) coordinates is proposed. Unlike existing basis expansion methods, this new algorithm does not require .estimation of the base frequencies, neither need the assumption of linearly varying delays across symbols. The algorithm offers definite explanation of the expansion coordinates. Simulation demonstrates the effectiveness of the algorithm.
基金supported by Sichuan Youth Science and Technology Innovation Research Team Project(No.2015TD0022)the Talents Project of Sichuan University of Science and Engineering(No.2017RCL11 and No.2017RCL10)the first batch of science and technology plan key R&D project of Sichuan province(No.2017GZ0068)
文摘To improve the deteriorated capacity gain and source recovery performance due to channel mismatch problem,this paper reports a research about blind separation method against channel mismatch in multiple-input multiple-output(MIMO) systems.The channel mismatch problem can be described as a channel with bounded fluctuant errors due to channel distortion or channel estimation errors.The problem of blind signal separation/extraction with channel mismatch is formulated as a cost function of blind source separation(BSS) subject to the second-order cone constraint,which can be called as second-order cone programing optimization problem.Then the resulting cost function is solved by approximate negentropy maximization using quasi-Newton iterative methods for blind separation/extraction source signals.Theoretical analysis demonstrates that the proposed algorithm has low computational complexity and improved performance advantages.Simulation results verify that the capacity gain and bit error rate(BER) performance of the proposed blind separation method is superior to those of the existing methods in MIMO systems with channel mismatch problem.
基金the National Natural Science Foundation of China (No.60575006).
文摘This letter deals with blind identification of nonlinear discrete Hammerstein system under the input signal that is cyclostationary. The first-order moment of the specific input as well as the inverse nonlinear mapping of the Hammerstein model are combined to establish a relationship between the system output and the system parameters, which implies an approach to identifying the system blindly. Simulation results demonstrate the effectiveness of this approach to blind identification of a class of nonlinear systems.
基金Hong Wang's research was supported in part by the Anesthesiology Department at Wayne State University and in part by Wayne State University Research Enhancement ProgramLeyi Wang" s research was supported in part by the National Science Foundation ( No.
文摘Noise artifacts are one of the key obstacles in applying continuous monitoring and computer-assisted analysis of lung sounds. Traditional adaptive noise cancellation (ANC) methodologies work reasonably well when signal and noise are stationary and independent. Clinical lung sound auscultation encounters an acoustic environment in which breath sounds are not stationary and often correlate with noise. Consequendy, capability of ANC becomes significantly compromised. This paper introduces a new methodology for extracting authentic lung sounds from noise-corrupted measurements. Unlike traditional noise cancellation methods that rely on either frequency band separation or signal/noise independence to achieve noise reduction, this methodology combines the traditional noise canceling methods with the unique feature of time-split stages in breathing sounds. By employing a multi-sensor system, the method first employs a high-pass filter to eliminate the off-band noise, and then performs time-shared blind identification and noise cancellation with recursion from breathing cycle to cycle. Since no frequency separation or signal/noise independence is required, this method potentially has a robust and reliable capability of noise reduction, complementing the traditional methods.
基金National Natural Science Foundations of China(Nos.61203147,61374047,61203126,60973095)
文摘This paper is concerned with distributed fault detection of second-order discrete-time multi-agent systems with adversary,where the adversary is regarded as a slowly time-varying signal.Firstly,a novel intrusion detection scheme based on the theory of unknown input observability( UIO) is proposed. By constructing a bank of UIO,the states of the malicious agents can be directly estimated. Secondly,the faulty-node-removal algorithm is provided.Simulations are also provided to demonstrate the effectiveness of the theoretical results.
基金Supported by the National Basic Research Program of China (Grant No. 2008CB317109)the National Natural Science Foundation of China(Grant No. 60572054)+1 种基金the Foundation of Authors of National Excellent Doctoral Dissertation (Grant No. 200239)the Scientific Research Foundation for Returned Scholars, Ministry of Education of China
文摘We present an adaptive algorithm for blind identification and equalization of single-input multiple-output （SIMO） FIR channels with second-order statistics. We first reformulate the blind channel identification problem into a low-rank matrix approximation solution based on the QR decomposition of the received data matrix. Then, a fast recursive algorithm is developed based on the bi-iterative least squares （Bi-LS） subspace tracking method. The new algorithm requires only a computational complexity of O（md2） at each iteration, or even as low as O（md） if only equalization is necessary, where m is the dimension of the received data vector （or the row rank of channel matrix） and d is the dimension of the signal subspace （or the column rank of channel matrix）. To overcome the shortcoming of the back substitution, an inverse QR iteration algorithm for subspace tracking and channel equalization is also developed. The inverse QR iteration algorithm is well suited for the parallel implementation in the systolic array. Simulation results are presented to illustrate the effectiveness of the proposed algorithms for the channel identification and equalization.
基金Supported by the National Natural Science Foundation of China (No.60575006).
文摘This paper presents a novel approach to structure determination of linear systems along with the choice of system orders and parameters. AutoRegressive （AR）, Moving Average （MA） or AutoRegressive-Moving Average （ARMA） model structure can be extracted blindly from the Third Order Cumulants （TOC） of the system output ts, where the unknown system is driven by an unobservable stationary independent identically distributed （i.i.d.） non-Gaussian signal. By means of the system order recursion, whether the system has an AR structure or has AR part of an ARMA structure is firstly investigated. MA features in the TOC domain is then applied as a threshold to decide if the system is an MA model or has MA part of an ARMA model. Numerical simulations illustrate the generality of the proposed blind structure identification methodology that may serve as a guideline for blind, linear system modeling.
文摘The existing methods for identifying recursive systematic convolutional encoders with high robustness require to test all the candidate generator matrixes in the search space exhaustively.With the increase of the codeword length and constraint length,the search space expands exponentially,and thus it limits the application of these methods in practice.To overcome the limitation,a novel identification method,which gets rid of exhaustive test,is proposed based on the cuckoo search algorithm by using soft-decision data.Firstly,by using soft-decision data,the probability that a parity check equation holds is derived.Thus,solving the parity check equations is converted to maximize the joint probability that parity check equations hold.Secondly,based on the standard cuckoo search algorithm,the established cost function is optimized.According to the final solution of the optimization problem,the generator matrix of recursive systematic convolutional code is estimated.Compared with the existing methods,our proposed method does not need to search for the generator matrix exhaustively and has high robustness.Additionally,it does not require the prior knowledge of the constraint length and is applicable in any modulation type.
基金Supported by the National Natural Science Foundation of China under Grant No.60372086the Foundation for the Author of National Excellent Doctoral Dissertation of China under Grant No.200753
文摘The problem of blind adaptive equalization of underwater single-input multiple-output (SIMO) acoustic channels was analyzed by using the linear prediction method.Minimum mean square error (MMSE) blind equalizers with arbitrary delay were described on a basis of channel identification.Two methods for calculating linear MMSE equalizers were proposed.One was based on full channel identification and realized using RLS adaptive algorithms,and the other was based on the zero-delay MMSE equalizer and realized using LMS and RLS adaptive algorithms,respectively.Performance of the three proposed algorithms and comparison with two existing zero-forcing (ZF) equalization algorithms were investigated by simulations utilizing two underwater acoustic channels.The results show that the proposed algorithms are robust enough to channel order mismatch.They have almost the same performance as the corresponding ZF algorithms under a high signal-to-noise (SNR) ratio and better performance under a low SNR.
