The main purpose of this research is the second-order modeling of flow and turbulent heat flux in nonpremixed methane-air combustion.A turbulent stream of non-premixed combustion in a stoichiometric condition,is numer...The main purpose of this research is the second-order modeling of flow and turbulent heat flux in nonpremixed methane-air combustion.A turbulent stream of non-premixed combustion in a stoichiometric condition,is numerically analyzed through the Reynolds averaged Navier-Stokes(RANS) equations.For modeling radiation and combustion,the discrete ordinates(DO) and eddy dissipation concept model have been applied.The Reynolds stress transport model(RSM) also was used for turbulence modeling.For THF in the energy equation,the GGDH model and high order algebraic model of HOGGDH with simple eddy diffusivity model have been applied.Comparing the numerical results of the SED model(with the turbulent Prandtl 0.85) and the second-order heat flux models with available experimental data follows that applying the second-order models significantly led to the modification of predicting temperature distribution and species mass fraction distribution in the combustion chamber.Calculation of turbulent Prandtl number in the combustion chamber shows that the assumption of Pr_(t) of 0.85 is far from reality and Pr_(t) in different areas varies from 0.4 to 1.2.展开更多
A new second-order moment model for turbulent combustion is applied in the simulation of methane-air turbulent jet flame. The predicted results are compared with the experimental results and with those predicted using...A new second-order moment model for turbulent combustion is applied in the simulation of methane-air turbulent jet flame. The predicted results are compared with the experimental results and with those predicted using the well-known EBU-Arrhenius model and the original second-order moment model. The comparison shows the advantage of the new model that it requires almost the same computational storage and time as that of the original second-order moment model, but its modeling results are in better agreement with experiments than those using other models. Hence, the new second-order moment model is promising in modeling turbulent combustion with NOx formation with finite reaction rate for engineering application.展开更多
A full second-order moment (FSM) model and an algebraic stress (ASM) two-phase turbulence modelare proposed and applied to predict turbulent bubble-liquid flows in a 2D rectangular bubble column. Predictiongives the b...A full second-order moment (FSM) model and an algebraic stress (ASM) two-phase turbulence modelare proposed and applied to predict turbulent bubble-liquid flows in a 2D rectangular bubble column. Predictiongives the bubble and liquid velocities, bubble volume fraction, bubble and liquid Reynolds stresses and bubble-liquidvelocity correlation. For predicted two-phase velocities and bubble volume fraction there is only slight differencebetween these two models, and the simulation results using both two models are in good agreement with the particleimage velocimetry (PIV) measurements. Although the predicted two-phase Reynolds stresses using the FSM are insomewhat better agreement with the PIV measurements than those predicted using the ASM, the Reynolds stressespredicted using both two models are in general agreement with the experiments. Therefore, it is suggested to usethe ASM two-phase turbulence model in engineering application for saving the computation time.展开更多
A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concepts of particle large-scale fluctuation due to turbulence and particle small-scale flu...A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concepts of particle large-scale fluctuation due to turbulence and particle small-scale fluctuation due to collision and through a unified treatment of these two kinds of fluctuations. The proposed model is used to simulate gas-particle flows in a channel and in a downer. Simulation results are in agreement with the experimental results reported in references and are near the results obtained using the sin- gle-scale second-order moment two-phase turbulence model superposed with a particle collision model （USM-θ model） in most regions.展开更多
A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concept of particle large-scale fluctuation due to turbulence and particle small-scale fluc...A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concept of particle large-scale fluctuation due to turbulence and particle small-scale fluctuation due to collision. The proposed model is used to simulate gas-particle downer reactor flows. The computational results of both particle volume fraction and mean velocity are in agreement with the experimental results. After analyzing effects of empirical coefficient on prediction results, we can come to a conclusion that, inside the limit range of empirical coefficient, the predictions do not reveal a large sensitivity to the empirical coefficient in the downer reactor, but a relatively great change of the constants has important effect on the prediction.展开更多
The USM-θ model of Bingham fluid for dense two-phase turbulent flow was developed, which combines the second-order moment model for two-phase turbulence with the particle kinetic theory for the inter-particle collisi...The USM-θ model of Bingham fluid for dense two-phase turbulent flow was developed, which combines the second-order moment model for two-phase turbulence with the particle kinetic theory for the inter-particle collision. In this model, phases interaction and the extra term of Bingham fluid yield stress are taken into account. An algorithm for USM-θ model in dense two-phase flow was proposed, in which the influence of particle volume fraction is accounted for. This model was used to simulate turbulent flow of Bingham fluid single-phase and dense liquid-particle two-phase in pipe. It is shown USM-θ model has better prediction result than the five-equation model, in which the particle-particle collision is modeled by the particle kinetic theory, while the turbulence of both phase is simulated by the two-equation turbulence model. The USM-θ model was then used to simulate the dense two-phase turbulent up flow of Bingham fluid with particles. With the increasing of the yield stress, the velocities of Bingham and particle decrease near the pipe centre. Comparing the two-phase flow of Bingham-particle with that of liquid-particle, it is found the source term of yield stress has significant effect on flow.展开更多
The second-order moment combustion model, proposed by the authors is validated using the direct numerical simulation （DNS） of incompressible turbulent reacting channel flows. The instantaneous DNS results show the n...The second-order moment combustion model, proposed by the authors is validated using the direct numerical simulation （DNS） of incompressible turbulent reacting channel flows. The instantaneous DNS results show the near-wall strip structures of concentration and temperature fluctuations. The DNS statistical results give the budget of the terms in the correlation equations, showing that the production and dissipation terms are most important. The DNS statistical data are used to validate the closure model in RANS second-order moment （SOM） combustion model. It is found that the simulated diffusion and production terms are in agreement with the DNS data in most flow regions, except in the near-wall region, where the near-wall modification should be made, and the closure model for the dissipation term needs further improvement. The algebraic second-order moment （ASOM） combustion model is well validated by DNS.展开更多
Turbulent dispersed multiphase flows,including gas-particle,gas-droplet and bubble-liquid flows,are widely encountered in various engineering facilities.Modeling of two-phase turbulence,in particular the dispersed pha...Turbulent dispersed multiphase flows,including gas-particle,gas-droplet and bubble-liquid flows,are widely encountered in various engineering facilities.Modeling of two-phase turbulence,in particular the dispersed phase turbulence,is the key problem in the Eulerian-Eulerian simulation of practical dispersed multiphase flows.Although different models were developed and used,the experimental validation shows that they cannot always give satisfactory prediction results.In this paper the present author give a detailed review of the unified second-order moment (USM),k-k p and nonlinear k-k p two-phase turbulence models,proposed by him.The derivation and closure of these models are described in detail and the experimental validation and application of these models are extensively discussed.展开更多
A particle nonlinear two-scale kp-εp turbulence model is proposed for simulating the anisotropic turbulent two-phase flow. The particle kinetic energy equation for two-scale fluctuation, particle energy transfer rate...A particle nonlinear two-scale kp-εp turbulence model is proposed for simulating the anisotropic turbulent two-phase flow. The particle kinetic energy equation for two-scale fluctuation, particle energy transfer rate equation for large-scale fluctuation, and particle turbulent kinetic energy dissipation rate equation for small-scale fluctuation are derived and closed. This model is used to simulate gas-particle flows in a sudden-expansion chamber. The simulation is com- pared with the experiment and with those obtained by using another two kinds of tow-phase turbulence model, such as the single-scale k-ε two-phase turbulence model and the particle two-scale second-order moment （USM） two-phase turbulence model. It is shown that the present model gives simulation in much better agreement with the experiment than the single-scale k-ε two-phase turbulence model does and is almost as good as the particle two-scale USM turbu-lence model.展开更多
A two-scale second-order moment two-phase turbulence model was developed and used to simulate gas-particle flow in a sudden-expansion chamber and a channel. The simulation results were in agreement with the experiment...A two-scale second-order moment two-phase turbulence model was developed and used to simulate gas-particle flow in a sudden-expansion chamber and a channel. The simulation results were in agreement with the experimental results, and the results were compared with those of the single-scale second-order moment two-phase turbulence model. Several improved features show that the two-scale model is to a certain extent better than the single-scale model, which may be attributed to the fact that particle turbulence is well characterized by the two-scale turbulence model.展开更多
Dense gas-particle flows are frequently encountered in fluidized beds,riser and downer reactors,pneumatic transport and the near-wall zone of dilute gas-particle flows.Particle-particle collision plays an important ro...Dense gas-particle flows are frequently encountered in fluidized beds,riser and downer reactors,pneumatic transport and the near-wall zone of dilute gas-particle flows.Particle-particle collision plays an important role in the behavior of two-phase flows.In this paper a USM-Q two-phase turbulence model for dense gas-particle flows is proposed to account for both two-phase turbulence and inter-particle collision.For two-fluid large-eddy simulation of gas-particle flows,the author proposed a unified second-order moment(USM) two-phase SGS stress model and a two-phase k-kp SGS energy-equation stress model.The proposed models can fully account for the interaction between the gas and particle SGS stresses.展开更多
The derivation and closure methods of the second-order moment (SOM) combus- tion model are proposed. The application of this model to Reynolds averaged (RANS) and large-eddy simulation (LES) of turbulent swirling diff...The derivation and closure methods of the second-order moment (SOM) combus- tion model are proposed. The application of this model to Reynolds averaged (RANS) and large-eddy simulation (LES) of turbulent swirling diffusion combustion, jet diffusion combustion, and bluff-body stabilized premixed combustion is sum- marized. It is indicated that the SOM model is much better than the eddy-beak-up (EBU) and presumed PDF models widely used in commercial software and engi- neering. The SOM modeling results are close to those obtained using the most accurate but much more complex PDF equation model. Moreover, it can save much more computation time than the PDF equation model. Finally, the SOM model is validated by the direct numerical simulation (DNS) of turbulent reacting channel flows.展开更多
Using the single particle states and the residual interaction derived from the relativistic point-coupling model with the PC-F1 parameter set,the second-order core polarization corrections to nuclear magnetic moments ...Using the single particle states and the residual interaction derived from the relativistic point-coupling model with the PC-F1 parameter set,the second-order core polarization corrections to nuclear magnetic moments of LS closed shell nuclei ±1 nucleon with A = 15,17,39 and 41 are studied and compared with previous non-relativistic results.It is found that the second-order corrections are significant.With these corrections,the isovector magnetic moments of the concerned nuclei are well reproduced,especially those for A = 17 and A = 41.展开更多
Turbulent two-phase combustion is widely encountered in spray and pulverized-coal combustors,and large-eddy simulation(LES)becomes a powerful CFD method for its simulation,because LES can give unsteady flame structure...Turbulent two-phase combustion is widely encountered in spray and pulverized-coal combustors,and large-eddy simulation(LES)becomes a powerful CFD method for its simulation,because LES can give unsteady flame structures and more reasonable statistical results than Reynolds-averaged modeling.Present combustion models in LES either lack of generality or are computationally too expensive.A statistical moment model based on the idea of turbulence modeling called“second-order moment(SOM)combustion model”was developed by the present authors for LES of two-phase combustion.In this paper,a review is given on our published research results for SOM-LES of two-phase combustion,including the description of the SOM-LES model,its application,validation of statistical results by experiments,as well as the phenomena obtained by instantaneous results.展开更多
文摘The main purpose of this research is the second-order modeling of flow and turbulent heat flux in nonpremixed methane-air combustion.A turbulent stream of non-premixed combustion in a stoichiometric condition,is numerically analyzed through the Reynolds averaged Navier-Stokes(RANS) equations.For modeling radiation and combustion,the discrete ordinates(DO) and eddy dissipation concept model have been applied.The Reynolds stress transport model(RSM) also was used for turbulence modeling.For THF in the energy equation,the GGDH model and high order algebraic model of HOGGDH with simple eddy diffusivity model have been applied.Comparing the numerical results of the SED model(with the turbulent Prandtl 0.85) and the second-order heat flux models with available experimental data follows that applying the second-order models significantly led to the modification of predicting temperature distribution and species mass fraction distribution in the combustion chamber.Calculation of turbulent Prandtl number in the combustion chamber shows that the assumption of Pr_(t) of 0.85 is far from reality and Pr_(t) in different areas varies from 0.4 to 1.2.
基金The project sponsored by the Foundation for Doctorate Thesis of Tsinghua Universitythe National Key Project in 1999-2004 sponsored by the Ministry of Science and Technology of China
文摘A new second-order moment model for turbulent combustion is applied in the simulation of methane-air turbulent jet flame. The predicted results are compared with the experimental results and with those predicted using the well-known EBU-Arrhenius model and the original second-order moment model. The comparison shows the advantage of the new model that it requires almost the same computational storage and time as that of the original second-order moment model, but its modeling results are in better agreement with experiments than those using other models. Hence, the new second-order moment model is promising in modeling turbulent combustion with NOx formation with finite reaction rate for engineering application.
基金Supported by the Special Funds for Major State Basic Research Projects, PRC(G1999-0222-08) and the National Natural Science Foundation of China(No. 19872039).
文摘A full second-order moment (FSM) model and an algebraic stress (ASM) two-phase turbulence modelare proposed and applied to predict turbulent bubble-liquid flows in a 2D rectangular bubble column. Predictiongives the bubble and liquid velocities, bubble volume fraction, bubble and liquid Reynolds stresses and bubble-liquidvelocity correlation. For predicted two-phase velocities and bubble volume fraction there is only slight differencebetween these two models, and the simulation results using both two models are in good agreement with the particleimage velocimetry (PIV) measurements. Although the predicted two-phase Reynolds stresses using the FSM are insomewhat better agreement with the PIV measurements than those predicted using the ASM, the Reynolds stressespredicted using both two models are in general agreement with the experiments. Therefore, it is suggested to usethe ASM two-phase turbulence model in engineering application for saving the computation time.
基金The project supported by the Special Funds for Major State Basic Research,China(G-1999-0222-08)the Postdoctoral Science Foundation(2004036239)
文摘A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concepts of particle large-scale fluctuation due to turbulence and particle small-scale fluctuation due to collision and through a unified treatment of these two kinds of fluctuations. The proposed model is used to simulate gas-particle flows in a channel and in a downer. Simulation results are in agreement with the experimental results reported in references and are near the results obtained using the sin- gle-scale second-order moment two-phase turbulence model superposed with a particle collision model （USM-θ model） in most regions.
基金Project supported by China Post-Doctoral Science Foundation(No.2004036239)
文摘A two-scale second-order moment two-phase turbulence model accounting for inter-particle collision is developed, based on the concept of particle large-scale fluctuation due to turbulence and particle small-scale fluctuation due to collision. The proposed model is used to simulate gas-particle downer reactor flows. The computational results of both particle volume fraction and mean velocity are in agreement with the experimental results. After analyzing effects of empirical coefficient on prediction results, we can come to a conclusion that, inside the limit range of empirical coefficient, the predictions do not reveal a large sensitivity to the empirical coefficient in the downer reactor, but a relatively great change of the constants has important effect on the prediction.
基金Project supported by the National Key Basic Research and Development Program of China(No.G1999-0222-08)
文摘The USM-θ model of Bingham fluid for dense two-phase turbulent flow was developed, which combines the second-order moment model for two-phase turbulence with the particle kinetic theory for the inter-particle collision. In this model, phases interaction and the extra term of Bingham fluid yield stress are taken into account. An algorithm for USM-θ model in dense two-phase flow was proposed, in which the influence of particle volume fraction is accounted for. This model was used to simulate turbulent flow of Bingham fluid single-phase and dense liquid-particle two-phase in pipe. It is shown USM-θ model has better prediction result than the five-equation model, in which the particle-particle collision is modeled by the particle kinetic theory, while the turbulence of both phase is simulated by the two-equation turbulence model. The USM-θ model was then used to simulate the dense two-phase turbulent up flow of Bingham fluid with particles. With the increasing of the yield stress, the velocities of Bingham and particle decrease near the pipe centre. Comparing the two-phase flow of Bingham-particle with that of liquid-particle, it is found the source term of yield stress has significant effect on flow.
基金Supported by the National Natural Science Foundation of China （50606026, 50736006）.
文摘The second-order moment combustion model, proposed by the authors is validated using the direct numerical simulation （DNS） of incompressible turbulent reacting channel flows. The instantaneous DNS results show the near-wall strip structures of concentration and temperature fluctuations. The DNS statistical results give the budget of the terms in the correlation equations, showing that the production and dissipation terms are most important. The DNS statistical data are used to validate the closure model in RANS second-order moment （SOM） combustion model. It is found that the simulated diffusion and production terms are in agreement with the DNS data in most flow regions, except in the near-wall region, where the near-wall modification should be made, and the closure model for the dissipation term needs further improvement. The algebraic second-order moment （ASOM） combustion model is well validated by DNS.
基金supported by the National Key Project of Fundamental Research of China (Grant No.G1999-0222-07-08)the National Natural Science Foundation of China (Grant Nos.50736006 and 50606026)the Foundation of State Key Laboratory of Engines,Tianjin University (Grant No.K2010-07)
文摘Turbulent dispersed multiphase flows,including gas-particle,gas-droplet and bubble-liquid flows,are widely encountered in various engineering facilities.Modeling of two-phase turbulence,in particular the dispersed phase turbulence,is the key problem in the Eulerian-Eulerian simulation of practical dispersed multiphase flows.Although different models were developed and used,the experimental validation shows that they cannot always give satisfactory prediction results.In this paper the present author give a detailed review of the unified second-order moment (USM),k-k p and nonlinear k-k p two-phase turbulence models,proposed by him.The derivation and closure of these models are described in detail and the experimental validation and application of these models are extensively discussed.
文摘A particle nonlinear two-scale kp-εp turbulence model is proposed for simulating the anisotropic turbulent two-phase flow. The particle kinetic energy equation for two-scale fluctuation, particle energy transfer rate equation for large-scale fluctuation, and particle turbulent kinetic energy dissipation rate equation for small-scale fluctuation are derived and closed. This model is used to simulate gas-particle flows in a sudden-expansion chamber. The simulation is com- pared with the experiment and with those obtained by using another two kinds of tow-phase turbulence model, such as the single-scale k-ε two-phase turbulence model and the particle two-scale second-order moment （USM） two-phase turbulence model. It is shown that the present model gives simulation in much better agreement with the experiment than the single-scale k-ε two-phase turbulence model does and is almost as good as the particle two-scale USM turbu-lence model.
基金Project supported by the Special Funds for Major State Basic Research (Grant No: G-1999-0222-08), China Postdoctoral Science Foundation (Grant No: 2004036239).
文摘A two-scale second-order moment two-phase turbulence model was developed and used to simulate gas-particle flow in a sudden-expansion chamber and a channel. The simulation results were in agreement with the experimental results, and the results were compared with those of the single-scale second-order moment two-phase turbulence model. Several improved features show that the two-scale model is to a certain extent better than the single-scale model, which may be attributed to the fact that particle turbulence is well characterized by the two-scale turbulence model.
基金supported by the National Key Project of Fundamental Research of China (Grant No. G1999-0222-07-08)the Projects of the National Natural Science Foundation of China (Grant Nos. 50736006 and 50606026)the Foundation of the State Key Laboratory of Engines, Tianjin University (Grant No. K-2010-07)
文摘Dense gas-particle flows are frequently encountered in fluidized beds,riser and downer reactors,pneumatic transport and the near-wall zone of dilute gas-particle flows.Particle-particle collision plays an important role in the behavior of two-phase flows.In this paper a USM-Q two-phase turbulence model for dense gas-particle flows is proposed to account for both two-phase turbulence and inter-particle collision.For two-fluid large-eddy simulation of gas-particle flows,the author proposed a unified second-order moment(USM) two-phase SGS stress model and a two-phase k-kp SGS energy-equation stress model.The proposed models can fully account for the interaction between the gas and particle SGS stresses.
基金Supported by the National Natural Science Foundation of China (Grant Nos. 50606026 and 50736006)the National Basic Research Program of China ("973") (Grant No. G-1999-0222-07)
文摘The derivation and closure methods of the second-order moment (SOM) combus- tion model are proposed. The application of this model to Reynolds averaged (RANS) and large-eddy simulation (LES) of turbulent swirling diffusion combustion, jet diffusion combustion, and bluff-body stabilized premixed combustion is sum- marized. It is indicated that the SOM model is much better than the eddy-beak-up (EBU) and presumed PDF models widely used in commercial software and engi- neering. The SOM modeling results are close to those obtained using the most accurate but much more complex PDF equation model. Moreover, it can save much more computation time than the PDF equation model. Finally, the SOM model is validated by the direct numerical simulation (DNS) of turbulent reacting channel flows.
基金supported by the Major State Basic Research Developing Program (Grant No.2007CB815000)the National Natural Science Foundation of China(Grant Nos.10775004,10720003, 10947013, 10975008, 10975007, and 11005069)the Southwest University Initial Research Foundation Grant to Doctor (Grant No.SWU109011)
文摘Using the single particle states and the residual interaction derived from the relativistic point-coupling model with the PC-F1 parameter set,the second-order core polarization corrections to nuclear magnetic moments of LS closed shell nuclei ±1 nucleon with A = 15,17,39 and 41 are studied and compared with previous non-relativistic results.It is found that the second-order corrections are significant.With these corrections,the isovector magnetic moments of the concerned nuclei are well reproduced,especially those for A = 17 and A = 41.
基金sponsored by the Project of National Natural Science Foundation of China under the Grant 51390493.
文摘Turbulent two-phase combustion is widely encountered in spray and pulverized-coal combustors,and large-eddy simulation(LES)becomes a powerful CFD method for its simulation,because LES can give unsteady flame structures and more reasonable statistical results than Reynolds-averaged modeling.Present combustion models in LES either lack of generality or are computationally too expensive.A statistical moment model based on the idea of turbulence modeling called“second-order moment(SOM)combustion model”was developed by the present authors for LES of two-phase combustion.In this paper,a review is given on our published research results for SOM-LES of two-phase combustion,including the description of the SOM-LES model,its application,validation of statistical results by experiments,as well as the phenomena obtained by instantaneous results.
