Gigahertz frequency hopping in an optical phase-locked loop for Raman lasers

Raman lasers are essential in atomic physics,and the development of portable devices has posed requirements for time-division multiplexing of Raman lasers.We demonstrate an innovative gigahertz frequency hopping approach of a slave Raman laser within an optical phase-locked loop(OPLL),which finds practical application in an atomic gravimeter,where the OPLL frequently switches between near-resonance lasers and significantly detuned Raman lasers.The method merges the advantages of rapid and extensive frequency hopping with the OPLL’s inherent low phase noise,and exhibits a versatile range of applications in compact laser systems,promising advancements in portable instruments.

11.6-GHz 0.18-μm monolithic CMOS phase-locked loop

A design of a ll. 6-GHz phase-locked loop （PLL） fabricated in 49-GHz 0. 18-μm CMOS （complementary metal-oxide-semiconductor transistor） technology is described. An analog multiplier phase detector （PD）, a one-pole passive low pass filter and a three-stage ring oscillator with variable negativeresistance loads build up the monolithic phase-locked loop. The measured rms jitter of output signal via onwafer testing is 2. 2 ps under the stimulation of 2^31 - 1 bit-long pseudo random bit sequence （PRBS） at the bit rate of 11.6 GHz. And the tracking range is 250 MHz. The phase noise in the locked condition is measured to be - 107 dBc/Hz at 10 MHz offset, and that of the ring VCO at the central frequency is -99 dBc/Hz at 10 MHz offset. The circuit area of the proposed PLL is only 0. 47mm×0.72mm and the direct current （DC） power dissipation is 164 mW under a 1.8-V supply.

A frequency servo SoC with output power stabilization loop technology for miniaturized atomic clocks

A frequency servo system-on-chip(FS-SoC)featuring output power stabilization technology is introduced in this study for high-precision and miniaturized cesium(Cs)atomic clocks.The proposed power stabilization loop(PSL)technique,incorporating an off-chip power detector(PD),ensures that the output power of the FS-SoC remains stable,mitigating the impact of power fluctuations on the atomic clock's stability.Additionally,a one-pulse-per-second(1PPS)is employed to syn-chronize the clock with GPS.Fabricated using 65 nm CMOS technology,the measured phase noise of the FS-SoC stands at-69.5 dBc/Hz@100 Hz offset and-83.9 dBc/Hz@1 kHz offset,accompanied by a power dissipation of 19.7 mW.The Cs atomic clock employing the proposed FS-SoC and PSL obtains an Allan deviation of 1.7×10^(-11) with 1-s averaging time.

CMOS analog and mixed-signal phase-locked loops: An overview

CMOS analog and mixed-signal phase-locked loops(PLL)are widely used in varies of the system-on-chips(SoC)as the clock generator or frequency synthesizer.This paper presents an overview of the AMS-PLL,including:1)a brief introduction of the basics of the charge-pump based PLL,which is the most widely used AMS-PLL architecture due to its simplicity and robustness;2)a summary of the design issues of the basic CPPLL architecture;3)a systematic introduction of the techniques for the performance enhancement of the CPPLL;4)a brief overview of ultra-low-jitter AMS-PLL architectures which can achieve lower jitter(<100 fs)with lower power consumption compared with the CPPLL,including the injection-locked PLL(ILPLL),subsampling(SSPLL)and sampling PLL(SPLL);5)a discussion about the consideration of the AMS-PLL architecture selection,which could help designers meet their performance requirements.

An improved arctangent algorithm based on phase-locked loop for heterodyne detection system

We present an ameliorated arctangent algorithm based on phase-locked loop for digital Doppler signal processing,utilized within the heterodyne detection system. We define the error gain factor given by the approximation of Taylor expansion by means of a comparison of the measured values and true values. Exact expressions are derived for the amplitude error of two in-phase & quadrature signals and the frequency error of the acousto-optic modulator. Numerical simulation results and experimental results make it clear that the dynamic instability of the intermediate frequency signals leads to cumulative errors, which will spiral upward. An improved arctangent algorithm for the heterodyne detection is proposed to eliminate the cumulative errors and harmonic components. Depending on the narrow-band filter, our experiments were performed to realize the detectable displacement of 20 nm at a detection distance of 20 m. The aim of this paper is the demonstration of the optimized arctangent algorithm as a powerful approach to the demodulation algorithm, which will advance the signal-to-noise ratio and measurement accuracy of the heterodyne detection system.

Design of radiation hard phase-locked loop at 2.5 GHz using SOS-CMOS

A radiation hard phase-locked loop （PLL） is designed at 2.5 GHz using silicon on sapphire complementary metal-oxide-semiconductor process. Radiation hardness is achieved through improving circuit design without sacrificing real estate. Stability is guaranteed by a fully self-bias architecture. The lock time of PLL is minimized by maximizing the loop bandwidth. Frequency tuning range of voltage controlled oscillator is significantly enhanced by a novel load configuration. In addition, multiple bias stages, asynchronous frequency divider, and silicon on sapphire process jointly make the proposed PLL more radiation hard. Layout of this PLL is simulated by Cadence Spectre RF under both single event effect and total induced dose effect. Simulation results demonstrate excellent stability, lock time 〈 600 ns, frequency tuning range [1.57 GHz, 3.46 GHz], and jitter 〈 12 ps. Through comparison with PLLs in literatures, the PLL is especially superior in terms of lock time and frequency tuning range performances.

A 5.12-GHz LC-based phase-locked loop for silicon pixel readouts of high-energy physics

There is an urgent need for high-quality and high-frequency clock generators for high-energy physics experiments.The transmission data rate exceeds 10 Gbps for a single channel in future readout electronics of silicon pixel detectors.Others,such as time measurement detectors,require a high time resolution based on the time-to-digital readout architecture.A phase-locked loop(PLL)is an essential and broadly used circuit in these applications.This study presents an application-specific integrated circuit of a low-jitter,low-power LC-tank that is PLL fabricated using 55-nm CMOS technology.It includes a 3rd-order frequency synthesis loop with a programmable bandwidth,a divide-by-2 pre-scaler,standard low-voltage differential signaling interfaces,and a current mode logic(CML)driver for clock transmissions.All the d-flip-flop dividers and phase-frequency detectors are protected from single-event upsets using the triple modular redundancy technique.The proposed VCO uses low-pass filters to suppress the noise from bias circuits.The tested LC-PLL covers a frequency locking range between 4.74 GHz and 5.92 GHz with two sub-bands.The jitter measurements of the frequency-halved clock(2.56 GHz)are less than 460 fs and 0.8 ps for the random and deterministic jitters,respectively,and a total of 7.5 ps peak-to-peak with a bit error rate of 10^(-12).The random and total jitter values for frequencies of 426 MHz and 20 MHz are less than 1.8 ps and 65 ps,respectively.The LC-PLL consumed 27 mW for the core and 73.8 mW in total.The measured results nearly coincided with the simulations and validated the analyses and tests.

A LOW POWER TIME-TO-DIGITAL CONVERTER FOR ALL-DIGITAL PHASE-LOCKED LOOP

Time-to-Digital Converter (TDC) is a key block used as the phase/frequency detector in an All-Digital Phase-Locked Loop (ADPLL). Usually, it occupies a large proportion of ADPLL's total power consumption up to about 30% to 40%. In this paper, the detailed power consumption of different components in the TDC is analyzed. A Power Management Block (PMB) is presented for the TDC to reduce its power consumption. A 24-bits TDC core with the proposed PMB is implemented in HJTC 0.18 μm CMOS technology. Simulation results show that up to 84% power reduction is achieved using our proposed technique.

Phase-Locked Loop Based Cancellation of ECG Power Line Interference

Power line(PL)interference is one significant artifact in electrocardiography(ECG)that needs to be reduced to ensure accurate recording of cardiac signals.Because PL interference is non-stationary and has varying frequency,phase,and amplitude in ECG measurement,adaptive techniques are often necessary to track and cancel the interference.In this paper we present a phase-locked loop(PLL)-based adaptive filter to cancel PL interference.The PLL obtains the reference signal that is fed into the adaptive filter to remove the PL interference at the central frequency of 50 Hz.It is found that the technique can effectively cancel PL interference in real ECG signals and,when compared with some existing techniques such as least mean squares(LMS)adaptive filter,the new technique produces better results in terms of signal-to-interference ratio(SIR).

Hybrid phase-locked loop with fast locking time and low spur in a 0.18-μm CMOS process

We propose a novel hybrid phase-locked loop （PLL） architecture for overcoming the trade-off between fast locking time and low spur. To reduce the settling time and meanwhile suppress the reference spurs, we employ a wide-band single-path PLL and a narrow-band dual-path PLL in a transient state and a steady state, respectively, by changing the loop bandwidth according to the gain of voltage controlled oscillator （VCO） and the resister of the loop filter. The hybrid PLL is implemented in a 0.18-μm complementary metal oxide semiconductor （CMOS） process with a total die area of 1.4×0.46 mm2. The measured results exhibit a reference spur level of lower than -73 dB with a reference frequency of 10 MHz and a settling time of 20 μs with 40 MHz frequency jump at 2 GHz. The total power consumption of the hybrid PLL is less than 27 mW with a supply voltage of 1.8 V.

Comparative Study of Low-Pass Filter and Phase-Locked Loop Type Speed Filters for Sensorless Control of AC Drives

High quality speed information is one of the key issues in machine sensorless drives,which often requires proper filtering of the estimated speed.This paper comparatively studies typical low-pass filters(LPF)and phase-locked loop(PLL)type filters with respect to ramp speed reference tracking and steady-state performances,as well as the achievement of adaptive cutoff frequency control.An improved LPF-based filter structure with no ramping and steady-state errors caused by filter parameter quantization effects is proposed,which is suitable for applying LPF for sensorless drives of AC machines,especially when fixed-point digital signal processor is selected e.g.in mass production.Furthermore,the potential of adopting PLL for speed filtering is explored.It is demonstrated that PLL type filters can well maintain the advantages offered by the improved LPF.Moreover,it is found that the PLL type filters exhibit almost linear relationship between the cutoff frequency of the PLL filter and its proportional-integral(PI)gains,which can ease the realization of speed filters with adaptive cutoff frequency for improving the speed transient performance.The proposed filters are verified experimentally.The PLL type filter with adaptive cutoff frequency can provide satisfactory performances under various operating conditions and is therefore recommended.

Dynamic Free-Spectral-Range Measurement for Fiber Resonator Based on Digital-Heterodyne Optical Phase-Locked Loop

We propose a novel scheme, based on digital-heterodyne optical phase-locked loop with whole-fiber circuit, to dynamically measure the free-spectral-range of a fiber resonator. The optical phase-locked loop is established with a differential frequency-modulation module consists of a pair of acousto-optic modulators. The resonance-tracking loop is derived with the Pound-Drever-Hall technique for locking the heterodyne frequency of the OPLL on the frequency difference between adjacent resonance modes. A stable locking accuracy of about 7 × 10?9 and a dynamic locking accuracy of about 5 × 10?8 are achieved with the FSR of 8.155 MHz, indicating a bias stability of the resonator fiber optic gyro of about 0.1?/h with 10 Hz bandwidth. In addition, the thermal drift coefficient of the FSR is measured as 0.1 Hz/?C. This shows remarkable potential for realizing advanced optical measurement systems, such as the resonant fiber optic gyro, and so on.

Sliding-mode Observer-based Grid Voltage-observation Method with Frequency-fixed Dual SOGI and Cross-compensated Phase-locked Loop

Conventional sliding-mode observer(SMO)-based grid-voltage observation methods often require a low-pass filter(LPF)to remove high-frequency sliding-mode noise.However,a complicated phase-and amplitude-compensation method,which is highly sensitive to the DC-offset,is required.A frequency-adaptive dual second-order generalized integrator(SOGI)can be used to replace the LPF,eliminating the compensation link and the effects of the DC-offset;however,strong coupling is introduced between the front-end SOGI block and back-end phase-locked loop(PLL)block,thereby reducing the dynamic performance.To solve this problem,this study proposes an SMO-based grid-voltage observation method with a frequency-fixed dual SOGI and cross-compensated PLL that can eliminate the frequency coupling between the front-end SOGI block and back-end PLL blocks,thereby increasing its dynamic performance.In this study,the phase and amplitude are compensated simultaneously using the proposed cross-compensation method,achieving an accurate observation of the grid voltage under off-nominal frequencies.An analysis of the small-signal model theoretically verified that the proposed method has good dynamic performance.Finally,the superiority of the proposed method is verified through comparative experiments.

A sapphire fibre thermal probe based on fast Fourier transform and phase-lock loop

A sapphire fibre thermal probe with Cr^3＋ ion-doped end is developed by using the laser heated pedestal growth method. The fluorescence thermal probe offers advantages of compact structure, high performance and ability to withstand high temperature in a detection range from room temperature to 450℃. Based on the fast Fourier transform （FFT）, the fluorescence lifetime is obtained from the tangent function of phase angle of the non-zeroth terms in the FFT result. This method has advantages such as quick calculation, high accuracy and immunity to the background noise. This FFT method is compared with other traditional fitting methods, indicating that the standard deviation of the FFT method is about half of that of the Prony method and about 1/6 of that of the log-fit method. And the FFT method is immune to the background noise involved in a signal. So, the FFT method is an excellent way of processing signals. In addition, a phase-lock amplifier can effectively suppress the noise.

CHAOS AND BIFURCATION OF PHASE-LOCKING LOOPS UNDER PERIODIC PERTURBATION

This paper discusses the chaos and bifurcation for equation x+cosxx+asinx =ebsint. By use of the Melnikov method the conditions to have the chaotic behavior and to have subharmonic oscillations are given.

DC offset rejection in a frequency-fixed second-order generalized integrator-based phase-locked loop for single-phase grid-connected applications

Fast and accurate monitoring of the phase,amplitude,and frequency of the grid voltage is essential for single-phase grid-connected converters.The presence of DC offset in the grid voltage is detrimental to not only grid synchronization but also the closed-loop stability of the grid-connected converters.In this paper,a new synchronization method to mitigate the effect of DC offset is presented using arbitrarily delayed signal cancelation(ADSC)in a second-order generalized integrator(SOGI)phase-locked loop(PLL).A frequency-fixed SOGI-based PLL(FFSOGI-PLL)is adopted to ensure better stability and to reduce the complexity compared with other SOGI-based PLLs.A small-signal model of the proposed PLL is derived for the systematic design of proportional-integral(PI)controller gains.The effects of frequency variation and ADSC on the proposed PLL are considered,and correction methods are adopted to accurately estimate grid information.The simulation results are presented,along with comparisons to other single-phase PLLs in terms of settling time,peak frequency,and phase error to validate the proposed PLL.The dynamic performance of the proposed PLL is also experimentally validated.Overall,the proposed PLL has the fastest transient response and better dynamic performance than the other PLLs for almost all performance indices,offering an improved solution for precise grid synchronization in single-phase applications.

Design and implementation of digital closed-loop drive control system of a MEMS gyroscope

In order to effectively control the working state of the gyroscope in drive mode, the drive characteristics of the micro electromechanical system （MEMS） gyroscope are analyzed in principle. A novel drive circuit for the MEMS gyroscope in digital closed-loop control is proposed, which utilizes a digital phase-locked loop （PLL） in frequency control and an automatic gain control （AGC） method in amplitude control. A digital processing circuit with a field programmable gate array （FPGA） is designed and the experiments are carried out. The results indicate that when the temperature changes, the drive frequency can automatically track the resonant frequency of gyroscope in drive mode and that of the oscillating amplitude holds at a set value. And at room temperature, the relative deviation of the drive frequency is 0.624 ×10^-6 and the oscillating amplitude is 8.0 ×10^-6, which are 0. 094% and 18. 39% of the analog control program, respectively. Therefore, the control solution of the digital PLL in frequency and the AGC in amplitude is feasible.

Application of novel super-exponential iteration algorithm in underwater acoustic channel

A novel variable step-size modified super-exponential iteration(MSEI)decision feedback blind equalization(DFE)algorithm with second-order digital phase-locked loop is put forward to improve the convergence performance of super-exponential iteration DFE algorithm.Based on the MSEI-DFE algorithm,it is first proposed to develop an error function as an improvement to the error function of MSEI,which effectively achieves faster convergence speed of the algorithm.Subsequently,a hyperbolic tangent function variable step-size algorithm is developed considering the high variation rate of the hyperbolic tangent function around zero,so as to further improve the convergence speed of the algorithm.In the end,a second-order digital phase-locked loop is introduced into the decision feedback equalizer to track and compensate for the phase rotation of equalizer input signals.For the multipath underwater acoustic channel with mixed phase and phase rotation,quadrature phase shift keying(QPSK)and 16 quadrature amplitude modulation(16QAM)modulated signals are used in the computer simulation of the algorithm in terms of convergence and carrier recovery performance.The results show that the proposed algorithm can considerably improve convergence speed and steady-state error,make effective compensation for phase rotation,and efficiently facilitate carrier recovery.

Small-signal Stability Analysis and Improvement with Phase-shift Phase-locked Loop Based on Back Electromotive Force Observer for VSC-HVDC in Weak Grids

Voltage source converter based high-voltage direct current(VSC-HVDC)transmission technology has been extensively employed in power systems with a high penetration of renewable energy resources.However,connecting a voltage source converter(VSC)to an AC weak grid may cause the converter system to become unstable.In this paper,a phase-shift phaselocked loop(PS-PLL)is proposed wherein a back electromotive force(BEMF)observer is added to the conventional phaselocked loop(PLL).The BEMF observer is used to observe the voltage of the infinite grid in the stationaryαβframe,which avoids the problem of inaccurate observations of the grid voltage in the dq frame that are caused by the output phase angle errors of the PLL.The VSC using the PS-PLL can operate as if it is facing a strong grid,thus enhancing the stability of the VSC-HVDC system.The proposed PS-PLL only needs to be properly modified on the basis of a traditional PLL,which makes it easy to implement.In addition,because it is difficult to obtain the exact impedance of the grid,the influence of shortcircuit ratio(SCR)estimation errors on the performance of the PS-PLL is also studied.The effectiveness of the proposed PSPLL is verified by the small-signal stability analysis and timedomain simulation.

Ring-VCO-based phase-locked loops for clock generation–design considerations and state-of-the-art

This article overviews the design considerations and state-of-the-art of the ring voltage-controlled oscillator(VCO)-based phase-locked loops(PLLs)for clock generation in different applications.Partic-ularly,the objective of the current work is to evaluate the required PLL performance among the fundamental metrics of power,jitter and area.An in-depth treatment of the mainstream PLL architectures and the associated design techniques enables them to be compared analyt-ically and benchmarked with respect to their figure-of-merit(FoM).The paper also summarizes the key concerns on the selection of dif-ferent circuit techniques to optimize the clock performance under dif-ferent scenarios.