Enhanced Capacitive Characteristics of Activated Carbon by Secondary Activation

The effect of the improvement of commercial activated carbon(AC) on its specific capacitance and high rate capability of double layer(dl) charging/discharging process has been studied. The improvement of AC was carried out \%via\% a secondary activation under steam in the presence of catalyst NiCl\-2, and the suitable condition was found to be a heat treatment at about 875 ℃ for 1 h. Under those conditions, the discharge specific capacitance of the improved AC increases up to 53.67 F/g, showing an increase of about 25% as compared with that of as-received AC. The good rectangular-shaped voltammograms and A.C. impedance spectra prove that the high rate capability of the capacitor made of the improved AC is enhanced significantly. The capacitance resistance(RC) time constant of the capacitor containing the improved AC is 1\^74 s, which is much lower than that of the one containing as-received AC(an RC value of 4.73 s). It is noted that both kinds of AC samples show a similar specific surface area and pore size distribution, but some changes have taken place in the carbon surface groups, especially a decrease in the concentration of surface carbonyl groups after the improvement, which have been verified by means of X-photoelectron spectroscopy. Accordingly, it is suggested that the decrease in the concentration of surface carbonyl groups for the improved AC is beneficial to the organic electrolyte ion penetrating into the pores, thus leading to the increase in both the specific capacitance and high rate capability of the supercapacitor.

Characterization and kinetic modeling of secondary phases in squeeze cast Al alloy A380 by DSC thermal analysis

Thermal analyses on squeeze cast aluminum alloy A380(SC A380) solidified under 90MPa were carried out to study the microstructure development of the alloy, in which a differential scanning calorimeter(DSC) was employed. During the DSC runs, heating and cooling rates of 1, 3, 10, and 20 °C·min^(-1) were applied to investigate the heating and cooling effects on dissolution of secondary eutectic phases and microstructure evolution. Various reactions corresponding to troughs and peaks of the DSC curves were identified as corresponding to phase transformations taking place during dissolution or precipitation suggested by the principles of thermodynamics and kinetics. The comparison of the identified characteristic temperatures in the measured heating and cooling curves are generally in good agreement with the computed equilibrium temperatures. The microstructure analyses by scanning electron microscopy(SEM) with energy dispersive X-ray spectroscopy(EDS) indicate that the distribution and morphology of secondary phases present in the microstructure of the annealed sample are similar to the as-cast A380, i.e., strip β(Si), buck bone like or dot distributed θ(Al_2Cu), β(Al_5Fe Si) and Al_(15)(FeMn)_3Si_2. Two kinetic methods are employed to calculate the activation energies of the three common troughs and three common peaks in DSC curves of SC A380. The activation energies of the identified reaction θ_(CuAl_2) = α(Al)+β(Si) is 188.7 and 187.1 k J?mol^(-1) when the activation energies of reaction α(Al)+β(Si)→θCu Al_2 is^(-1)22.7 and^(-1)21.8 k J?mol^(-1), by the Kissinger and Starink methods, respectively.

THE SECONDARY REACTION IN THE CONDENSATION OF 1-METHYL-2-METHYLTHIO-IMIDAZOLINE WITH ACTIVE METHYLENE COMPOUNDS

Mono-substituted heterocyclic ketene aminals are formed by the reaction of 1-methyl-2-methylthio-imidazoline with active methylene compounds containinq an acetyl or benzoyl group by the elimination of both a methylthio and an acyl group.This is resulted by the secondary reactio of the produced methanethiol to attack the more active carbonyl group.

Structures and Antiviral Activities of Butyrolactone Derivatives Isolated from Aspergillus terreus MXH-23

A new butyrolactone derivative,namely butyrolactone Ⅷ （1）,and six known butyrolactones （2-7） were separated from the ethyl acetate （EtOAc） extract of the fermentation broth of a fungus,Aspergillus terreus MXH-23.The chemical structures of these metabolites were identified by analyzing their nuclear magnetic resonance （NMR） and mass spectrometry （MS）.Known butyrolactone derivatives contain an α,β-unsaturated γ-lactone ring with α-hydroxyl and y-benzyl,and butyrolactone Ⅷ （1） was the first butyrolactones contains α-benzyl and γ-hydroxyl on α,β-unsaturated lactone ring.All of the butyrolactone derivatives were tested for their anti-influenza （H 1N 1） effects.Derivatives 4 and 7 showed moderate antiviral activities while the newly-identified,derivative 1,did not.

Superfast and solvent-free core-shell assembly of sulfur/carbon active particles by hail-inspired nanostorm technology for high-energy-density Li-S batteries

The demand on low-carbon emission fabrication technologies for energy storage materials is increasing dramatically with the global interest on carbon neutrality.As a promising active material for metal-sulfur batteries,sulfur is of great interest due to its high-energy-density and abundance.However,there is a lack of industry-friendly and low-carbon fabrication strategies for high-performance sulfur-based active particles,which,however,is in critical need by their practical success.Herein,based on a hail-inspired sulfur nano-storm(HSN)technology developed in our lab,we report an energy-saving,solvent-free strategy for producing core-shell sulfur/carbon electrode particles(CNT@AC-S)in minutes.The fabrication of the CNT@AC-S electrode particles only involves low-cost sulfur blocks,commercial carbon nanotubes(CNT)and activated carbon(AC)micro-particles with high specific surface area.Based on the above core-shell CNT@AC-S particles,sulfur cathode with a high sulfur-loading of 9.2 mg cm^(-2) delivers a stable area capacity of 6.6 mAh cm^(-2) over 100 cycles.Furthermore,even for sulfur cathode with a super-high sulfur content(72 wt%over the whole electrode),it still delivers a high area capacity of 9 mAh cm^(-2) over50 cycles in a quasi-lean electrolyte condition.In a nutshell,this study brings a green and industryfriendly fabrication strategy for cost-effective production of rationally designed S-rich electrode particles.

Clinical characteristics of macrophage activation syndrome secondary to systemic lupus erythematosus

Objective To investigate the clinical features of macrophage activation syndrome(MAS)associated with systemic lupus erythematosus(SLE).Methods The clinical data of 15 patients with SLE-induced MAS diagnosed in Peking Union Medical College Hospital from July

Polyoxygenated dihydropyrano[2,3-c]pyrrole-4,5-dione derivatives from the marine mangrove-derived endophytic fungus Penicillium brocae MA-231 and their antimicrobial activity

A new polyoxygenated dihydropyrano[2,3-c]pyrrole-4,5-dione derivative, pyranonigrin F （1）, together with a related known compound, pyranonigrin A （2）, were isolated and identified from Penicillium brocae MA-231, an endophytic fungus obtained from the fresh tissue of the marine mangrove plant Avicennia marina. The structures of these metabolites were determined based on comprehensive spectral interpretation and the absolute configuration of compound 1 was established by X-ray crystallographic analysis. Compounds 1 and 2 showed potent activity against a broad spectrum of human-, aqua-, and plant-pathogens.