Optimal Cooperative Secondary Control for Islanded DC Microgrids via a Fully Actuated Approach

DC-DC converter-based multi-bus DC microgrids(MGs) in series have received much attention, where the conflict between voltage recovery and current balancing has been a hot topic. The lack of models that accurately portray the electrical characteristics of actual MGs while is controller design-friendly has kept the issue active. To this end, this paper establishes a large-signal model containing the comprehensive dynamical behavior of the DC MGs based on the theory of high-order fully actuated systems, and proposes distributed optimal control based on this. The proposed secondary control method can achieve the two goals of voltage recovery and current sharing for multi-bus DC MGs. Additionally, the simple structure of the proposed approach is similar to one based on droop control, which allows this control technique to be easily implemented in a variety of modern microgrids with different configurations. In contrast to existing studies, the process of controller design in this paper is closely tied to the actual dynamics of the MGs. It is a prominent feature that enables engineers to customize the performance metrics of the system. In addition, the analysis of the stability of the closed-loop DC microgrid system, as well as the optimality and consensus of current sharing are given. Finally, a scaled-down solar and battery-based microgrid prototype with maximum power point tracking controller is developed in the laboratory to experimentally test the efficacy of the proposed control method.

A Study of a Moral Dilemma Stories Teaching Model Focusing on the Development of Higher-Order Thinking --"Synthetic polymers" as an example

Cultivating students'higher-order thinking is one of the important goals of modern education,and innovative teaching model is an effective way to achieve this goal.Aiming at the inadequacy of the existing moral dilemma stories approach in the transformation of knowledge and behavior,this research constructs a new Project Based Learning-Ethical Dilemma Stories(PBL-EDS)Teaching Model applicable to China's secondary education stage based on the innovative features of the moral dilemma stories approach on the core competencies,taking the chemistry subject as an example to carry out practice,and puts forward suggestions for the implementation of the teaching model.Chemistry as an example to carry out the practice,and suggestions are made for the implementation of the teaching model.

Building Information Modeling-Based Secondary Development System for 3D Modeling of Underground Pipelines

Underground pipeline networks constitute a major component of urban infrastructure,and thus,it is imperative to have an efficient mechanism to manage them.This study introduces a secondary development system to efficiently model underground pipeline networks,using the building information modeling(BIM)-based software Revit.The system comprises separate pipe point and tubulation models.Using a Revit application programming interface(API),the spatial position and attribute data of the pipe points are extracted from a pipeline database,and the corresponding tubulation data are extracted from a tubulation database.Using the Family class in Revit API,the cluster in the self-built library of pipe point is inserted into the spatial location and the attribute data is added;in the same way,all pipeline instances in the pipeline system are created.The extension and localization of the model accelerated the modeling speed.The system was then used in a real construction project.The expansion of the model database and rapid modeling made the application of BIM technology in three-dimensional visualization of underground pipeline networks more convenient.Furthermore,it has applications in pipeline engineering construction and management.

Dynamic model of vertical vehicle-subgrade coupled system under secondary suspension

As it is known, track transportation can be divided into track system above and track system below. While the train is moving, the parts above and below are interacted and influenced. Therefore, in fact, the problem of track transportation is the match between the vehicle and the raihvay line system. In this paper, on a basis of dynamic analysis of the vehicle-subgrade model of vertical coupled system under primary suspension, utilizing track maintenance standard and simulating track irregularity excitation, the dynamic interaction of vehicle-track-subgrade system is researched in theory and dynamic model of the vertical vehicle-track-subgrade coupled system under secondary suspension is established by compatibility condition of deformation. Even this model considers the actual structure of a vehicle, also considers vibration characteristic of the substructure of track including subgrade and foundation. All these work want to be benefit for understanding and design about the dynamic characters of subgrade in high speed railway.

Critical Length Criterion and the Arc Chain Model for Calculating the Arcing Time of the Secondary Arc Related to AC Transmission Lines

The prompt extinction of the secondary arc is critical to the single-phase reclosing of AC transmission lines, including half-wavelength power transmission lines. In this paper, a low- voltage physical experimental platform was established and the motion process of the secondary arc was recorded by a high-speed camera. It was found that the arcing time of the secondary arc rendered a close relationship with its arc length. Through the input and output power energy analysis of the secondary arc, a new critical length criterion for the arcing time was proposed. The arc chain model was then adopted to calculate the arcing time with both the traditional and the proposed critical length criteria, and the simulation results were compared with the experimental data. The study showed that the arcing time calculated from the new critical length criterion gave more accurate results, which can provide a reliable criterion in term of arcing time for modeling and simulation of the secondary arc related with power transmission lines.

Probing the influence of secondary fracture connectivity on fracturing fluid flowback efficiency

A deep understanding of the geometric impacts of fracture on fracturing fluid flowback efficiency is essential for unconventional oil development. Using nuclear magnetic resonance and 2.5-dimensional matrix-fracture visualization microfluidic models, qualitative and quantitative descriptions of the influences of connectivity between primary fracture and secondary fracture on flowback were given from core scale to pore network scale. The flow patterns of oil-gel breaking fluid two-phase flow during flowback under different fracture connectivity were analyzed. We found some counterintuitive results that non-connected secondary fracture (NCSF, not connect with artificial primary fracture and embedded in the matrix) is detrimental to flowbackefficiency. The NCSF accelerates the formation of oil channeling during flowback, resulting in a large amount of fracturing fluid trapped in the matrix, which is not beneficial for flowback. Whereas the connected secondary fracture (CSF, connected with the artificial primary fracture) is conducive to flowback. The walls of CSF become part of primary fracture, which expands the drainage area with low resistance, and delays the formation of the oil flow channel. Thus, CSF increases the high-speed flowback stage duration, thereby enhancing the flowback efficiency. The fracturing fluid flowback efficiency investigated here follows the sequence of the connected secondary fracture model (72%) > the matrix model (66%) > the non-connected secondary fracture model (38%). Our results contribute to hydraulic fracturing design and the prediction of flowback efficiency.

Model control technologies of dynamic secondary cooling and soft reduction for slab continuous casting

Dynamic model control technologies of secondary cooling and soft reduction of Baosteel are introduced. Model principle and control system architecture are summarized, as well as functions and features. Finally, applications of model technologies are discussed. The self-developed dynamic secondary cooling model and the dynamic soft reduction model have been applied on several casting machines inside and outside Baosteel, desired control effects were achieved with good stability and reliability. Temperature measurement results verified the correctness of model.

Modeling the blast load induced by a close-in explosion considering cylindrical charge parameters

Structural damage is significantly influenced by the various parameters of a close-in explosion.To establish a close-in blast loading model for cylindrical charges according to these parameters,a series of field experiments and a systematic numerical analysis were conducted.A high-fidelity finite element model developed using AUTODYN was first validated using blast data collected from field tests conducted in this and previous studies.A quantitative analysis was then performed to determine the influence of the charge shape,aspect ratio(length to diameter),orientation,and detonation configuration on the characteristics and distributions of the blast loading(incident peak overpressure and impulse)according to scaled distance.The results revealed that the secondary peak overpressure generated by a cylindrical charge was mainly distributed along the axial direction and was smaller than the overpressure generated by an equivalent spherical charge.The effects of charge shape on the blast loading at 45°and 67.5°in the axial plane could be neglected at scaled distances greater than 2 m/kg^(1/3);the effect of aspect ratios greater than 2 on the peak overpressure in the 90°(radial)direction could be neglected at all scaled distances;and double-end detonation increased the radial blast loading by up to 60%compared to singleend detonation.Finally,an empirical cylindrical charge blast loading model was developed considering the influences of charge aspect ratio,orientation,and detonation configuration.The results obtained in this study can serve as a reference for the design of blast tests using cylindrical charges and aid engineers in the design of blast-resistant structures.

Numerical study on discharge characteristics influenced by secondary electron emission in capacitive RF argon glow discharges by fluid modeling

A one-dimensional（1D） fluid model of capacitive RF argon glow discharges between two parallel-plate electrodes at low pressure is employed. The influence of the secondary electron emission on the plasma characteristics in the discharges is investigated numerically by the model. The results show that as the secondary electron emission coefficient increases,the cycle-averaged electric field has almost no change; the cycle-averaged electron temperature in the bulk plasma almost does not change, but it increases in the two sheath regions; the cycle-averaged ionization rate, electron density, electron current density, ion current density, and total current density all increase. Also, the cycle-averaged secondary electron fluxes on the surfaces of the electrodes increase as the secondary electron emission coefficient increases. The evolutions of the electron flux, the secondary electron flux and the ion flux on the powered electrode increase as the secondary electron emission coefficient increases. The cycle-averaged electron pressure heating, electron Ohmic heating, electron heating, and ion heating in the two sheath regions increase as the secondary electron emission coefficient increases. The cycle-averaged electron energy loss increases with increasing secondary electron emission coefficient.

A synthetic semi-empirical physical model of secondary electron yield of metals under E-beam irradiation

Calculations of secondary electron yield（SEY） by physical formula can hardly accord with experimental results precisely. Simplified descriptions of internal electron movements in the calculation and complex surface contamination states of real sample result in notable difference between simulations and experiments. In this paper, in order to calculate SEY of metal under complicated surface state accurately, we propose a synthetic semi-empirical physical model. The processes of excitation of internal secondary electron（SE） and movement toward surface can be simulated using this model.This model also takes into account the influences of incident angle and backscattering electrons as well as the surface gas contamination. In order to describe internal electronic states accurately, the penetration coefficient of incident electron is described as a function of material atom number. Directions of internal electrons are set to be uniform in each angle. The distribution of internal SEs is proposed by considering both the integration convergence and the cascade scattering process.In addition, according to the experiment data, relationship among desorption gas quantities, sample ultimate temperature and SEY is established. Comparing with experiment results, this synthetic semi-empirical physical model can describe the SEY of metal better than former formulas, especially in the aspect of surface contaminated states. The proposed synthetic semi-empirical physical model and presented results in this paper can be helpful for further studying SE emission, and offer an available method for estimating and taking advantage of SE emission accurately.

Rapid Modeling of an Excavator Working Device Based on the Secondary Development of Pro/E

In order to shorten the design cycle of the excavator working device, we have proposed a rapid modeling method for the excavator working device which uses parameters. Based on the Pro/toolkit, which is secondary development tool of Pro/E4.0,and combined with Vs C＋＋2005 programming software. It developed a flexible set of MFC visualization-friendly interfaces. Users can enter data in the visual interface according to their needs and it will generate a new part model quickly. So it improves the design quality, shortens the design cycle, and makes the cost lower significantly.

Effects of O_(2)adsorption on secondary electron emission properties

The surface adsorption of gas molecules is a key factor limiting the secondary electron yield(SEY)of a material in many areas of applied physics.The influence of O_(2)adsorption on the SEY of metallic Ag is investigated in this work.To account for the particle distribution,we propose a BET theory based on multilayer O_(2)physisorption model.Furthermore,based on the phenomenological model of secondary electron(SE)emission and by taking into account the different scattering processes between electrons and particles in the adsorbed layer,we develop a numerical model of SEY in the adsorbed state using Monte Carlo simulations.The relationships among O_(2)adsorption,adsorption layer thickness,and SEY variation characteristics are then examined through a series of experiments.After 12-h exposure to O_(2),the clean samples increases12%-19%of the maximum value of SEY and 2.3 nm in thickness of the adsorbed layer.Experimental results are also compared with the results from the MC model to determine whether the model is accurate.

Secondary Structure Analysis of Native Cellulose by Molecular Dynamics Simulations with Coarse-Grained Model

第二等的结构不同我纤维素被分子的动力学模拟与马丁尼酒纹理粗糙的力量地分析，在纤维素的每链包括 40 个 D 葡萄糖单位的地方。计算关于纤维素的第二等的结构给满足的描述。作为增加的链数字，纤维素成为一个螺旋的表格，与螺丝钉成长并且螺线升起的直径。有趣地，有 6， 24 和 36 的链数字 N 4 的纤维素确实显示出右边的扭动。在对比上，有 12 的 N 8 的纤维素， 16 链是左边的扭动。这些模拟显示有比 36 大的链数字的纤维素将垮掉到二部分。而且，结果显示那个 36 链纤维素模型在所有模型之中是最稳定的。而且， Lennard-Jones 潜力决定第二等的结构。另外，一个方程被设置分析扭动的结构。

The Realistic Dilemma and Promoting Path of Secondary Vocational Education Talent Training Model under the Background of Education Supply-side Reform

In today's world,the competition for high-end smart technology is becoming increasingly fierce,and the huge connotation hidden behind the fierce competition is the competition of high-quality skilled talents.The status of secondary vocational education in our country's education system has a solid foundational role.The close connection it exhibits with social and economic development is beyond the reach of other types of education.However,the current secondary vocational education talent training model shows a situation that is not in line with market demand,and problems such as"shortage of skilled personnel"and"unemployment structural imbalance"have appeared in related fields.The supply of talents in secondary vocational education lacks a balanced mechanism,lacks in quality of supply,and does not have a high effect.It is urgent to train high-quality skilled talents with matching socio-economic structure transformation and upgrading for the society through education supply-side reform measures.In view of this,according to the changes in market demand,we will vigorously promote the reform of the school-based curriculum of secondary vocational schools,strive to create a new integrated development model that combines textbooks and practice,promote in-depth exchanges and cooperation between schools and characteristic enterprises in the industry,and train people in practice.Cultivating people,creating a good atmosphere for cultivating technical talents,and combining with the new goal of practicing education to build an evaluation system suitable for the growth of secondary vocational talents,making the human resource structure more and more suitable for the transformation and upgrading of the current social industrial structure.

Triaxial creep damage characteristics of sandstone under high crustal stress and its constitutive model for engineering application

The creep characteristics of rock under high crustal stress are of important influence on the long‐term stability of deep rock engineering.To study the creep characteristics and engineering application of sandstone under high crustal stress,this study constructed nonlinear creep damage(NCD)constitutive mode based on the triaxial graded loading‒unloading creep test of sandstone in the Yuezhishan Tunnel.A numerical NCD constitutive model and a breakable lining(BL)model were developed based on FLAC3D and then applied to the stability analysis of the Yuezhishan Tunnel.Based on the creep test results of sandstone,a power function of creep rate and stress level was constructed,by which the long‐term strength was solved.The results show that the long‐term strength of the red sandstone based on the related function of the steady‐state creep rate and stress level is close to the measured stress value in engineering.The NCD model considering damage factors reflects the instantaneous and viscoelastic plasticity deformation characteristics of the red sandstone.The numerical NCD constitutive model and the BL model can reflect surrounding rock deformation characteristics and lining failure characteristics in practical engineering.The research results provide theoretical references for long‐term stability analysis of rock engineering and the deformation control of surrounding rock under high crustal stress.

Deterministic and Stochastic Analysis of a New Rumor Propagation Model with Nonlinear Propagation Rate in Social Network

This paper presents a study on a new rumor propagation model with nonlinear propagation rate and secondary propagation rate. We divide the total population into three groups, the ignorant, the spreader and the aware. The nonlinear incidence rate describes the psychological impact of certain serious rumors on social groups when the number of individuals spreading rumors becomes larger. The main contributions of this work are the development of a new rumor propagation model and some results of deterministic and stochastic analysis of the rumor propagation model. The results show the influence of nonlinear propagation rate and stochastic fluctuation on the dynamic behavior of the rumor propagation model by using Lyapunov function method and stochastic related knowledge. Numerical examples and simulation results are given to illustrate the results obtained.

Evaluation of the Performance of Financial Support for Agriculture in Guizhou Province Using Secondary Relative Benefit Model Based on DEA

We use the secondary relative benefit model based on DEA to evaluate the performance of agricultural financial expenditure in Guizhou Province, which can give due consideration to the production effectiveness determined by objective natural conditions, and management effectiveness of all regions (as decision-making body) in the use of financial fund for supporting agriculture. In general, there is north-south gradient difference in the performance of financial support for agriculture between regions in Guizhou Province. The drought in 2010 has significant impact on the technical efficiency in the whole province; the performance score of each item in Liupanshui City and Southwest Guizhou is very low; the technical efficiency and management efficiency in most regions need to be improved. In order to improve the performance of financial support for agriculture, we need to ensure the scale of input; at the same time, provide appropriate preferential financial policies for agricultural infrastructure, especially the construction of rural water conservancy, development and promotion of agricultural science and technology, and other fields; adopt the way of special check and acceptance of supporting projects to strengthen the use management of the fund for agriculture.

含风光出力随机性的独立微电网二次频率控制

针对风、光发电随机性的问题,提出一种考虑新能源减载参与二次调频的模型预测控制方法。建立包含随机功率扰动的扩展状态矩阵,采用卡尔曼滤波估算随机未知扰动;依据风、光最大可用功率,建立实时变约束,避免机组功率越限;设置合理的权重系数,优先风、光发电出力参与二次调频;通过求解变约束二次规划问题,获得各个机组的优化调频功率。最后,建立含多个光伏、风电的微电网模型,在不同场景下与常规二次调频方法进行对比仿真。仿真结果表明,所提方法能提高系统频率恢复速度,减小系统频率波动,尤其在风、光发电剧烈波动场景下。

由规模化到精准化:国家中小学智慧教育平台教师研修的差异化需求及优化策略研究

立足常态化的新发展阶段,国家智慧教育平台教师寒暑假研修如何从规模化走向差异化、精准化,“按需施训”尤为关键。研究以基础教育阶段参训教师的9.06万条、149万余字反馈文本为研究对象,综合运用结构主题模型(STM)及重要性-绩效分析法(IPA),构建了国家中小学智慧教育平台教师研修需求框架,并深入分析其差异、明确基于需求要素的优化方向。研究发现:参训教师需求包含个体发展和系统环境两个层面的五类需求,且均存在显著的区域及城乡差异,针对时间安排及学时认定等研修机制需求仍须优化改进。研究为教师寒暑假研修精准化、差异化发展提供实证依据与决策支持,为优化研修服务提供策略建议。