Possibilities for the synthesis of superheavy element Z=121 in fusion reactions

Based on the dinuclear system model,the calculated evaporation residue cross sections matched well with the current experimental results.The synthesis of superheavy elements Z=121 was systematically studied through combinations of stable projectiles with Z=21-30 and targets with half-lives exceeding 50 d.The influence of mass asymmetry and isotopic dependence on the projectile and target nuclei was investigated in detail.The reactions^(254)Es(^(46)Ti,3n)^(297)121 and^(252)Es(^(46)Ti,3n)^(295)121 were found to be experimentally feasible for synthesizing superheavy element Z=121,with maximal evaporation residue cross sections of 6.619 and 4.123 fb at 219.9 and 223.9 MeV,respectively.

Clinical nursing value of predictive nursing in reducing complications of pregnant women undergoing short-term massive blood transfusion during cesarean section

BACKGROUND Cesarean hemorrhage is one of the serious complications,and short-term massive blood transfusion can easily cause postoperative infection and physical stress response.However,predictive nursing intervention has important clinical significance for it.AIM To explore the effect of predictive nursing intervention on the stress response and complications of women undergoing short-term mass blood transfusion during cesarean section(CS).METHODS A clinical medical record of 100 pregnant women undergoing rapid mass blood transfusion during sections from June 2019 to June 2021.According to the different nursing methods,patients divided into control group(n=50)and observation group(n=50).Among them,the control group implemented routine nursing,and the observation group implemented predictive nursing intervention based on the control group.Moreover,compared the differences in stress res-ponse,complications,and pain scores before and after the nursing of pregnant women undergoing rapid mass blood transfusion during CS.RESULTS The anxiety and depression scores of pregnant women in the two groups were significantly improved after nursing,and the psychological stress response of the observation group was significantly lower than that of the control group(P<0.05).The heart rate and mean arterial pressure(MAP)of the observation group during delivery were lower than those of the control group,and the MAP at the end of delivery was lower than that of the control group(P<0.05).Moreover,different pain scores improved significantly in both groups,with the observation group considerably less than the control group(P<0.05).After nursing,complications such as skin rash,urinary retention,chills,diarrhea,and anaphylactic shock in the observation group were 18%,which significantly higher than in the control group(4%)(P<0.05).CONCLUSION Predictive nursing intervention can effectively relieve the pain,reduce the incidence of complications,improve mood and stress response,and serve as a reference value for the nursing of women undergoing rapid mass transfusion during CS.

Proper interpretation of sectional analysis results

Displacement control algorithms commonly used to evaluate axial force-bending moment(PM)diagrams may lead to incorrect interpretations of the strength envelopes for asymmetric sections.This paper aims to offer valuable insights by comparing existing displacement control algorithms with a newly proposed force control algorithm.The main focus is on the PM diagrams of three example sections that exhibit varying degrees of asymmetry.The comparative study indicates that conventional displacement control algorithms inevitably introduce non-zero out-of-plane bending moments.The reported PM diagram in such cases erroneously neglects the out-of-plane moment and fails to represent the strength envelope accurately.This oversight results in significant and unconservative errors when verifying the strength of asymmetric sections.

Cross section determination of^(27)Al(n,2n)^(26)Al reaction induced by 14-MeV neutrons uniting with D-T neutron activation and AMS techniques

Aluminum is the primary structural material in nuclear engineering,and its cross section induced by 14-MeV neutrons is of great significance.To address the issue of insufficient accuracy for the^(27)Al(n,2n)^(26)Al reaction cross section,the activation method and accelerator mass spectrometry(AMS)technique were used to determine the^(27)Al(n,2n)^(26)Al cross section,which could be used as a D-T plasma ion temperature monitor in fusion reactors.At the China Academy of Engineering Physics,neutron activation was performed using a K-400 neutron generator produced by the T(d,n)4He reaction.The^(26)Al∕^(27)Al isotope ratios were measured using the newly installed GYIG 1 MV AMS at the Institute of Geochemistry,Chinese Academy of Sciences.The neutron flux was monitored by measuring the activity of 92mNb produced by the 93Nb(n,2n)92mNb reaction.The measured results were compared with available data in the experimental nuclear reaction database,and the measured values showed a reasonable degree of consistency with partially available literature data.The newly acquired cross-sectional data at 12 neutron energy points through systematic measurements clarified the divergence,which has two different growth trends from the existing experimental values.The obtained results are also compared with the corresponding evaluated database,and the newly calculated excitation functions with TALYS−1.95 and EMPIRE−3.2 codes,the agreement with CENDL−3.2,TENDL-2021 and EMPIRE−3.2 results are generally acceptable.A substantial improvement in the knowledge of the^(27)Al(n,2n)^(26)Al reaction excitation function was obtained in the present work,which will lay the foundation for the diagnosis of the fusion ion temperature,testing of the nuclear physics model,evaluation of nuclear data,etc.

A review of public health guidelines for postpartum physical activity and sedentary behavior from around the world

Background:The period following pregnancy is a critical time window when future habits with respect to physical activity(PA) and sedentary behavior(SB) are established;therefore,it warrants guidance.The purpose of this scoping review was to summarize public health-oriented country-specific postpartum PA and SB guidelines worldwide.Methods:To identity guidelines published since 2010,we performed a(a) systematic search of 4 databases(CINAHL,Global Health,PubMed,and SPORTDiscus),(b) structured repeatable web-based search separately for 194 countries,and(c) separate web-based search.Only the most recent guideline was included for each country.Results:We identified 22 countries with public health-oriented postpartum guidelines for PA and 11 countries with SB guidelines.The continents with guidelines included Europe(n=12),Asia(n=5),Oceania(n=2),Africa(n=1),North America(n=1),and South America(n=1).The most common benefits recorded for PA included weight control/management(n=10),reducing the risk of postpartum depression or depressive symptoms(n=9),and improving mood/well-being(n=8).Postpartum guidelines specified exercises to engage in,including pelvic floor exercises(n=17);muscle strengthening,weight training,or resistance exercises(n=13);aerobics/general aerobic activity(n=13);walking(n=11);cycling(n=9);and swimming(n=9).Eleven guidelines remarked on the interaction between PA and breastfeeding;several guidelines stated that PA did not impact breast milk quantity(n=7),breast milk quality(n=6),or infant growth(n=3).For SB,suggestions included limiting long-term sitting and interrupting sitting with PA.Conclusion:Country-specific postpartum guidelines for PA and SB can help promote healthy behaviors using a culturally appropriate context while providing specific guidance to public health practitioners.

The n-resolved single-electron capture in slow O^(6+)-Ne collisions

A study of single-electron capture(SEC) in 18-240 keV O^(6+)-Ne collisions has been conducted employing a combination of experimental and theoretical methodologies.Utilizing a reaction microscope,state-selective SEC cross sections and projectile scattering angle distributions were obtained.The translational energy spectra for SEC reveal the prevailing capture into n=3 states of the projectile ion,with a minor contribution from n=4 states.Notably,as the projectile's energy increases,the relative contribution of SEC n=4 states increases while that of SEC n=3 states diminishes.Furthermore,we computed state-selective relative cross sections and angular differential cross sections employing the classical molecular Coulomb over-the-barrier model(MCBM) and the multichannel Landau-Zener(MCLZ) model.A discernible discrepancy between the state-selective cross sections from the two theoretical models is apparent for the considered impact energies.However,regarding the angular differential cross sections,an overall agreement was attained between the current experimental results and the theoretical results from the MCLZ model.

Cr-induced fusion reactions to synthesize superheavy elements

We investigated ^(50,52-54)Cr-induced fusion reactions for the synthesis of the superheavy element in the 104≤Z≤122 range.The cross sections produced in this investigation using ^(54)Cr projectiles were compared with those obtained in prior experiments.The estimated cross sections from this analysis are consistent with the findings of prior studies.From the current study,the predicted cross section was found to be 42fb at 236 MeV for ^(53)Cr+^(243)Am,23.2 fb at 236 MeV for ^(54)Cr+^(247)Cm,95.6 fb at 240 MeV for ^(53)Cr+248Bk,and 1.33 fb at 242 MeV for ^(53)Cr+250Cf.Consequently,these projected cross sections with excitation energy and beam energy will be useful in future Cr-induced fusion reaction investigations.

Three-dimensional crystal defect imaging by STEM depth sectioning

One of the major innovations awaiting in electron microscopy is full three-dimensional imaging at atomic resolution.Despite the success of aberration correction to deep sub-angstrom lateral resolution,spatial resolution in depth is still far from atomic resolution.In scanning transmission electron microscopy(STEM),this poor depth resolution is due to the limitation of the illumination angle.To overcome this physical limitation,it is essential to implement a next-generation aberration corrector in STEM that can significantly improve the depth resolution.This review discusses the capability of depth sectioning for three-dimensional imaging combined with large-angle illumination STEM.Furthermore,the statistical analysis approach remarkably improves the depth resolution,making it possible to achieve three-dimensional atomic resolution imaging at oxide surfaces.We will also discuss the future prospects of three-dimensional imaging at atomic resolution by STEM depth sectioning.

Associations of Perchlorate,Nitrate,and Thiocyanate with Sex Hormones among Children:A Nationally Representative Cross-sectional Study in U.S.

Nitrates,thiocyanates,and perchlorates are ubiquitous in the environment and can be introduced to the public through various dietary and environmental sources.Nitrates,thiocyanates,and perchlorates mainly affect health via the same mechanism.These toxins may act as endocrine disrupters and can result in decreased levels of thyroid hormones^([1]).

From the editors

Dear Members of the Editorial Board, Contributors and Friends of the journal,This issue of Earthquake Engineering and Engineering Vibration(Vol. 23, No. 2) includes five papers in a special section entitled “Wave-Based Nondestructive Testing and Evaluation Methods in Civil Engineering”. The special section aims to present recent developments and applications of wave-based nondestructive testing and evaluation research. We thank the guest editors, Prof. Nenad Gucunski of Rutgers University, USA, Prof. Lin Shibin of Jianghan University, China and Prof. Chen Hongbing, University of Science and Technology Beijing, China, for their hard work and dedication.

Nonlinear Study on the Mechanical Performance of Built-Up Cold-Formed Steel Concrete-Filled Columns under Compression

Given their numerous functional and architectural benefits,such as improved bearing capacity and increased resistance to elastic instability modes,cold-formed steel(CFS)built-up sections have become increasingly developed and used in recent years,particularly in the construction industry.This paper presents an analytical and numerical study of assembled CFS two single channel-shaped columns with different slenderness and configurations(backto-back,face-to-face,and box).These columns were joined by double-row rivets for the back-to-back and box configurations,whereas they were welded together for the face-to-face design.The built-up columns were filled with ordinary concrete of good strength.Finite element models were applied,using ABAQUS software,to assess mechanical performance and study the influence of assembly techniques on the behavior of cold-formed columns under axial compression.Analytical approaches based on Eurocode 3 and Eurocode 4 recommendations for un-filled and concrete-filled columns respectively were followed for the numerical analysis,and concrete confinement effects were also considered per American Concrete Institute(ACI)standards for face-to-face and box configurations.The obtained results indicated a good correlation between the numerical results and the proposed analytical methodology which did not exceed 8%.The failure modes showed that the columns failed due to instabilities such as local and global buckling.

Numerical simulation of flow field deposition and erosion characteristics around bridge-road transition section

Wind-sand flow generates erosion and deposition around obstacles such as bridges and roadbeds, resulting in sand damage and endangering railway systems in sandy regions. Previous studies have mainly focused on the flow field around roadbeds, overlooking detailed examinations of sand particle erosion and deposition patterns near bridges and roadbeds. This study employs numerical simulations to analyze the influence of varying heights and wind speeds on sand deposition and erosion characteristics at different locations: the bridge-road transition section(side piers), middle piers, and roadbeds. The results show that the side piers, experience greater accumulation than the middle piers. Similarly, the leeward side of the roadbed witnesses more deposition compared to the windward side. Another finding reveals a reduced sand deposition length as the vertical profile, in alignment with the wind direction, moves further from the bridge abutments at the same clearance height. As wind speeds rise, there’s a decline in sand deposition and a marked increase in erosion around the side piers, middle piers and roadbeds. In conclusion, a bridge clearance that’s too low can cause intense sand damage near the side piers, while an extremely high roadbed may lead to extensive surface sand deposition. Hence, railway bridges in areas prone to sandy winds should strike a balance in clearance height. This research provides valuable guidelines for determining the most suitable bridge and roadbed heights in regions affected by wind and sand.

Identifying influential spreaders in complex networks based on density entropy and community structure

In recent years,exploring the relationship between community structure and node centrality in complex networks has gained significant attention from researchers,given its fundamental theoretical significance and practical implications.To address the impact of network communities on target nodes and effectively identify highly influential nodes with strong propagation capabilities,this paper proposes a novel influential spreaders identification algorithm based on density entropy and community structure(DECS).The proposed method initially integrates a community detection algorithm to obtain the community partition results of the networks.It then comprehensively considers the internal and external density entropies and degree centrality of the target node to evaluate its influence.Experimental validation is conducted on eight networks of varying sizes through susceptible–infected–recovered(SIR)propagation experiments and network static attack experiments.The experimental results demonstrate that the proposed method outperforms five other node centrality methods under the same comparative conditions,particularly in terms of information spreading capability,thereby enhancing the accurate identification of critical nodes in networks.

State-selective charge exchange cross sections in collisions of highly-charged sulfur ions with helium and molecular hydrogen

The state-selective cross section data are useful for understanding and modeling the x-ray emission in celestial observations.In the present work,using the cold target recoil ion momentum spectroscopy,for the first time we investigated the state-selective single electron capture processes for S^(q+)–He and H_(2)(q=11–15)collision systems at an impact energy of q×20 keV and obtained the relative state-selective cross sections.The results indicate that only a few principal quantum states of the projectile energy level are populated in a single electron capture process.In particular,the increase of the projectile charge state leads to the population of the states with higher principal quantum numbers.It is also shown that the experimental averaged n-shell populations are reproduced well by the over-barrier model.The database is openly available in Science Data Bank at 10.57760/sciencedb.j00113.00091.

Theoretical investigation of electron-impact ionization of W8+ion

The electron-impact single ionization cross section for W8+ion has been calculated using flexible atomic code,employing the level-to-level distorted-wave approximation.This calculations takes into account contributions form both direct ionization(DI)and excitation autoionization(EA).However,the theoretical predictions,based solely on the ground state,tends to underestimate the experimental values.This discrepancy can be mitigated by incorporation contributions from excited states.We extended the theoretical analysis,including the contributions from the long-lived metastable states with lifetimes exceeding 1.5×10-5 s.We employed two statistical models to predict the fraction of ground state ions in the parent ion beam.Assuming a 79%fraction of parent ions in ground configuration,the experiment measurements align with the predictions.Furthermore we derived the theoretical cross-section for the ground state as correlated plasma rate coefficients,and compared it with existing data.Despite the uncertainty in our calculations,our results are still acceptable.

Absolute partial and total ionization cross sections of carbon monoxide with electron collision from 350 eV to 8000 eV

The absolute partial and total cross sections for electron impact ionization of carbon monoxide are reported for electron energies from 350 eV to 8000 eV.The product ions(CO^(+),C^(+),O^(+),CO^(2+),C^(2+),and O^(2+))are measured by employing an ion imaging mass spectrometer and two ion-pair dissociation channels(C^(+)+O^(+)and C^(2+)+O^(+))are identified.The absolute cross sections for producing individual ions and their total,as well as for the ion-pair dissociation channels are obtained by normalizing the data of CO^(+)to that of Ar^(+)from CO-Ar mixture target with a fixed 1:1 ratio.The overall errors are evaluated by considering various kinds of uncertainties.A comprehensive comparison is made with the available data,which shows a good agreement with each other over the energy ranges that are overlapped.This work presents new cross-section data with electron energies above 1000 eV.

One-neutron stripping process in the^(209)Bi(^(6)Li,^(5)Li)^(210)Bi*reaction reaction

One-neutron stripping process between^(6)Li and^(209)Bi was studied at 28,30,and 34 MeV using the in-beamγ-ray spectroscopy method.Theγ-γcoincident analysis clearly identified twoγ-rays feeding the ground and long-lived isomeric states,which were employed to determine the cross section.The one-neutron stripping cross sections were similar to the cross sections of complete fusion in the^(6)Li+^(209)Bi system,but the one-neutron stripping cross sections decreased more gradually at the sub-barrier region.A coupled-reaction-channel calculation was performed to study the detailed reaction mechanism of the one-neutron stripping process in^(6)Li.The calculations indicated that the first excited state of 5 Li is critical in the actual one-neutron transfer mechanism,and the valence proton of 209Bi can be excited to the low-lying excited state in(^(6)Li,^(5)Li)reaction,unlike in the(d,p)reaction.

Measurement of the neutron-induced total cross sections of ^(nat)Pb from 0.3 eV to 20 MeV on the Back-n at CSNS

The neutron-induced total cross sections of natural lead have been measured in a wide energy range(0.3 eV-20 MeV)on the back-streaming white neutron beamline(Back-n)at the China Spallation Neutron Source.Neutron energy was determined by the neutron total cross-section spectrometer using the time-of-flight technique.A fast multi-cell fission chamber was used as the neutron detector,and a 10-mm-thick high-purity natural lead sample was employed for the neutron transmission measurements.The on-beam background was determined using Co,In,Ag,and Cd filters.The excitation function of ^(nat)Pb(n,tot)reaction below 20 MeV was calculated using the TALYS-1.96 nuclear-reaction modeling program.The present results were compared with previous results,the evaluated data available in the five major evaluated nuclear data libraries(i.e.,ENDF/B-VIII.0,JEFF-3.3,JENDL-5,CENDL-3.2,and BROND-3.1),and the theoretical calculation curve.Good agreement was found between the new results and those of previous experiments and with the theoretical curves in the corresponding region.This measurement obtained the neutron total cross section of natural lead with good accuracy over a wide energy range and added experimental data in the resonance energy range.This provides more reliable experimental data for nuclear engineering design and nuclear data evaluation of lead.

Study of primordial deuterium abundance in Big Bang nucleosynthesis

Big Bang nucleosynthesis(BBN)theory predicts the primordial abundances of the light elements^(2) H(referred to as deuterium,or D for short),^(3)He,^(4)He,and^(7) Li produced in the early universe.Among these,deuterium,the first nuclide produced by BBN,is a key primordial material for subsequent reactions.To date,the uncertainty in predicted deuterium abundance(D/H)remains larger than the observational precision.In this study,the Monte Carlo simulation code PRIMAT was used to investigate the sensitivity of 11 important BBN reactions to deuterium abundance.We found that the reaction rate uncertainties of the four reactions d(d,n)^(3)He,d(d,p)t,d(p,γ)^(3)He,and p(n,γ)d had the largest influence on the calculated D/H uncertainty.Currently,the calculated D/H uncertainty cannot reach observational precision even with the recent LUNA precise d(p,γ)^(3) He rate.From the nuclear physics aspect,there is still room to largely reduce the reaction-rate uncertainties;hence,further measurements of the important reactions involved in BBN are still necessary.A photodisintegration experiment will be conducted at the Shanghai Laser Electron Gamma Source Facility to precisely study the deuterium production reaction of p(n,γ)d.

Buckling Optimization of Curved Grid Stiffeners through the Level Set Based Density Method

Stiffened structures have great potential for improvingmechanical performance,and the study of their stability is of great interest.In this paper,the optimization of the critical buckling load factor for curved grid stiffeners is solved by using the level set based density method,where the shape and cross section(including thickness and width)of the stiffeners can be optimized simultaneously.The grid stiffeners are a combination ofmany single stiffenerswhich are projected by the corresponding level set functions.The thickness and width of each stiffener are designed to be independent variables in the projection applied to each level set function.Besides,the path of each single stiffener is described by the zero iso-contour of the level set function.All the single stiffeners are combined together by using the p-norm method to obtain the stiffener grid.The proposed method is validated by several numerical examples to optimize the critical buckling load factor.