Numerical simulations of flow and sediment transport within the Ning-Meng reach of the Yellow River,northern China

Effective management of a river reach requires a sound understanding of flow and sediment transport generated by varying natural and artificial runoff conditions. Flow and sediment transport within the Ning-Meng reach of the Yellow River（NMRYR）, northern China are controlled by a complex set of factors/processes, mainly including four sets of factors：（1） aeolian sediments from deserts bordering the main stream;（2） inflow of water and sediment from numerous tributaries;（3） impoundment of water by reservoir/hydro-junction; and（4） complex diversion and return of irrigation water. In this study, the 1-D flow ＆ sediment transport model developed by the Yellow River Institute of Hydraulic Research was used to simulate the flow and sediment transport within the NMRYR from 2001 to 2012. All four sets of factors that primarily control the flow and sediment transport mentioned above were considered in this model. Compared to the measured data collected from the hydrological stations along the NMRYR, the simulated flow and sediment transport values were generally acceptable, with relative mean deviation between measured and simulated values of 〈15%. However, simulated sediment concentration and siltation values within two sub-reaches（i.e., Qingtongxia Reservoir to Bayan Gol Hydrological Station and Bayan Gol Hydrological Station to Toudaoguai Hydrological Station） for some periods exhibited relatively large errors（the relative mean deviations between measured and simulated values of 18% and 25%, respectively）. These errors are presumably related to the inability to accurately determine the quantity of aeolian sediment influx to the river reach and the inflow of water from the ten ephemeral tributaries. This study may provide some valuable insights into the numerical simulations of flow and sediment transport in large watersheds and also provide a useful model for the effective management of the NMRYR.

Scour depth beneath a pipeline undergoing forced vibration

This paper studies the coupling effect of the pipeline vibration on the seabed scour. A vertical two- dimensional model is applied to numerically investigate the local scour below a vibrating pipeline with different amplitudes and periods. Using the scour underneath a fixed pipeline as a reference, this paper focuses on the impact of the pipeline vibration on the equilibrium scour depth. Generic relationships are established between the non-dimensional scour depth and the non-dimensional vibrating parameters, i.e., amplitude and frequency. The normalization process takes into account the influences of such parameters as the incoming flow velocity, pipe diameter, and Shields parameter. An empirical formula is proposed to quantify these relationships.