Coupled 2D Hydrodynamic and Sediment Transport Modeling of Megaflood due to Glacier Dam-break in Altai Mountains,Southern Siberia

One of the largest known megafloods on earth resulted from a glacier dam-break,which occurred during the Late Quaternary in the Altai Mountains in Southern Siberia.Computational modeling is one of the viable approaches to enhancing the understanding of the flood events.The computational domain of this flood is over 9460 km2 and about 3.784 × 106 cells are involved as a 50 m × 50 m mesh is used,which necessitates a computationally efficient model.Here the Open MP(Open Multiprocessing) technique is adopted to parallelize the code of a coupled 2D hydrodynamic and sediment transport model.It is shown that the computational efficiency is enhanced by over 80% due to the parallelization.The floods over both fixed and mobile beds are well reproduced with specified discharge hydrographs at the dam site.Qualitatively,backwater effects during the flood are resolved at the bifurcation between the Chuja and Katun rivers.Quantitatively,the computed maximum stage and thalweg are physically consistent with the field data of the bars and deposits.The effects of sediment transport and morphological evolution on the flood are considerable.Sensitivity analyses indicate that the impact of the peak discharge is significant,whilst those of the Manningroughness,medium sediment size and shape of the inlet discharge hydrograph are marginal.

Modeling the circulation and sediment transport in the Beibu Gulf

Water circulation and sediment transport in the Beibu Gulf are important for its environmental protection and resource exploitation.By employing the Regional Ocean Modeling System（ROMS）,we studied the seasonal variation of circulation,sediment transport and long-term morphological evolution in the Beibu Gulf.The simulation results show that the circulation induced by tide and wind is cyclonic both in winter and summer in the gulf and that the wind-driven circulation is stronger in winter than that in summer.The sediment concentration is higher in the Qiongzhou Strait,west of the Hainan Island and the coast of Vietnam and the Leizhou Peninsula.The sediment is transported westwards in winter and eastwards in summer in the Qiongzhou Strait.The west entrance of the Qiongzhou Strait is dominated by westward transport all the year round.The sediment discharged by rivers is deposited near the river mouths.The simulated result demonstrates that the sediment transport is mainly controlled by tidal induced bottom resuspension in the Beibu Gulf.Four characteristics are summarized for the distribution patterns of erosion and deposition.（1） The erosion and deposition are insignificant in most area of the gulf.（2） Sediment deposition is more significant in the mouths of Qiongzhou Strait.（3） The erosion is observed in the seabed of Qiongzhou Strait.（4） Erosion and deposition occur alternatively in the west of Hainan Island.

A three-dimensional,wave-current coupled,sediment transport model for POM

In the high-energy environment of coastal seas and estuaries,strong sediment resuspension/ deposition events are driven by surface waves,tides,winds and buoyancy driven currents.In recent years,A POM based three-dimensional,wave-current coupled,sediment transport model has been developed by the University of New South Wales.This paper presents several examples of the model applications to study sediment dynamics in the environments where forcings such as waves,tides,and winds are equally important to affect sediment fluxes and distributions.Firstly,the sediment transport model coupled to the Yellow Sea general circulation model and a third generation wave model SWAN was implemented in the Yellow Sea to study the dynamics of the sediment transport and resuspension in the northern Jiangsu shoal-wate(rNJSW).The sediment distributions and fluxes and their inter-annual variability were studied by realistic numerical simulations.The study found that the surface waves played a dominant role over the tides to form the turbidity maxima along the muddy coast of NJSW. Secondly,the sediment transport model was used to explore the effect of suspended sediment-induced stratification in the bottom boundary laye(rBBL).The model uses a re-parameterized bottom drag coefficient Cd that incorporates a linear stability function of flux Richardson number Rf.The study has shown that the sediment induced stratification in the BBL reduces the vertical eddy viscosity and bottom shear stress in comparison with the model prediction in a neutrally stratified BBL.In response to these apparent reductions,the tidal current shear is increased and sediments are abnormally concentrated within a thin wall layer that is overlain by a thicker layer with much smaller concentration.The formation of this fluid-mud layer near the seabed has led to a significant reduction in the total sediment transport.This study contributes to the understanding of formations of tidal flats along the coasts of turbid seas and estuaries.

Simulation of Suspended Sediment in the Yellow and East China Seas

Described is an initial attempt to simulate the suspended sediment dynamics relating to tidal and wave forcing during summertime in June 1980 and August 1981 for the Yellow and East China Seas continental shelf. The cohesive/non-cohesive sediment resuspension and movement generated by the interaction between current and wave are modeled by use of ECOMSED and WAM Cycle 4. Model results are compared with observations in US-China Marine Sedimentation Dynamics Program performed for 1980-81 at off the Changjiang estuary. The main features of simulations show that suspended sediment concentrations during the summer decreased markedly offshore as observed during the simulation periods. As for some discrepancies for the mouth of the estuary with high river discharges, i.e., the Changjiang River, the model did not properly reproduce the over-mixing situation in the summer; thus distinct vertical concentration variation in this local region is not agreeable with observation. However, general dispersal patterns of suspended sediment movement seem to be agreeably reproduced for the nearshore shallow region. Some of the procedures of simulation and results are presented and discussed.

Wintertime suspended sediment simulation in the Huanghai and East China Seas

A simulation of suspended sediment movement relating to tidal and wave forcing during a winter monsoon in November 1983 in the Huanghai and East China Seas continental shelf is attempted by using the model describing the cohesive/non-cohesive sediment resus-pension generated by interactions between currents and waves.model simulation showed that sediment concentration was increased by resuspension at shallow depths during the strong storm conditions due to high bottom stress interacted between currents and waves. This result is in general agreement with observations in horizontal distribution of suspended sediment distribution. At three current meter mooring positions off the southern Shandong Peninsula resuspension occurred only at a depth of 22 m,nearest coastal position and at deeper parts at depths of 51 and 80 m wave-current interaction effects were not significant. It has shown that the present model simulation demonstrated the capability of reproduction of suspended sediment movement under wintertime extreme event reasonably well.

Numerical simulations of flow and sediment transport within the Ning-Meng reach of the Yellow River,northern China

Effective management of a river reach requires a sound understanding of flow and sediment transport generated by varying natural and artificial runoff conditions. Flow and sediment transport within the Ning-Meng reach of the Yellow River（NMRYR）, northern China are controlled by a complex set of factors/processes, mainly including four sets of factors：（1） aeolian sediments from deserts bordering the main stream;（2） inflow of water and sediment from numerous tributaries;（3） impoundment of water by reservoir/hydro-junction; and（4） complex diversion and return of irrigation water. In this study, the 1-D flow ＆ sediment transport model developed by the Yellow River Institute of Hydraulic Research was used to simulate the flow and sediment transport within the NMRYR from 2001 to 2012. All four sets of factors that primarily control the flow and sediment transport mentioned above were considered in this model. Compared to the measured data collected from the hydrological stations along the NMRYR, the simulated flow and sediment transport values were generally acceptable, with relative mean deviation between measured and simulated values of 〈15%. However, simulated sediment concentration and siltation values within two sub-reaches（i.e., Qingtongxia Reservoir to Bayan Gol Hydrological Station and Bayan Gol Hydrological Station to Toudaoguai Hydrological Station） for some periods exhibited relatively large errors（the relative mean deviations between measured and simulated values of 18% and 25%, respectively）. These errors are presumably related to the inability to accurately determine the quantity of aeolian sediment influx to the river reach and the inflow of water from the ten ephemeral tributaries. This study may provide some valuable insights into the numerical simulations of flow and sediment transport in large watersheds and also provide a useful model for the effective management of the NMRYR.

1-D coupled non-equilibrium sediment transport modeling for unsteady flows in the discontinuous Galerkin framework

A high-resolution, 1-D numerical model has been developed in the discontinuous Galerkin framework to simulate 1-D flow behavior, sediment transport, and morphological evaluation under unsteady flow conditions. The flow and sediment concentration variables are computed based on the one-dimensional shallow water flow equations, while empirical equations are used for entrainment and deposition processes. The sediment transport model includes the bed load and suspended load components. New formulations for Harten-Lax-van Leer （HLL） and Harten-Lax-van Contact （HLLC） are presented for shallow water flow equations that include the bed load and suspended load fluxes. The computational results for the flow and morphological changes after two dam break events are compared with the physical model tests. Results show that the modified HLL and HLLC formulations are robust and can accurately predict morphological changes in highly unsteady flows.

Scour depth beneath a pipeline undergoing forced vibration

This paper studies the coupling effect of the pipeline vibration on the seabed scour. A vertical two- dimensional model is applied to numerically investigate the local scour below a vibrating pipeline with different amplitudes and periods. Using the scour underneath a fixed pipeline as a reference, this paper focuses on the impact of the pipeline vibration on the equilibrium scour depth. Generic relationships are established between the non-dimensional scour depth and the non-dimensional vibrating parameters, i.e., amplitude and frequency. The normalization process takes into account the influences of such parameters as the incoming flow velocity, pipe diameter, and Shields parameter. An empirical formula is proposed to quantify these relationships.

Numerical simulation of a horizontal sedimentation tank considering sludge recirculation

Most research conducted on the concentration distribution of sediment in the sedimentation tank does not consider the role of the suction dredge. To analyze concentration distribution more accurately, a suspended sediment transportation model was constructed and the velocity field in the sedimentation tank was determined based on the influence of the suction dredge. An application model was then used to analyze the concentration distribution in the sedimentation tank when the suction dredge was fixed, with results showing that distribution was in accordance with theoretical analysis. The simulated value of the outlet concentration was similar to the experimental value, and the trends of the isoconcentration distribution curves, as well as the vertical distribution curves of the five monitoring sections acquired through simulations, were almost the same as curves acquired through experimentation. The differences between the simulated values and the experimental values were significant.