Numerical investigation of the effects of soil-structure and granular material-structure interaction on the seismic response of a flat-bottom reinforced concrete silo

In this work,a numerical study of the effects of soil-structure interaction(SSI)and granular material-structure interaction(GSI)on the nonlinear response and seismic capacity of flat-bottomed storage silos is conducted.A series of incremental dynamic analyses(IDA)are performed on a case of large reinforced concrete silo using 10 seismic recordings.The IDA results are given by two average IDA capacity curves,which are represented,as well as the seismic capacity of the studied structure,with and without a consideration of the SSI while accounting for the effect of GSI.These curves are used to quantify and evaluate the damage of the studied silo by utilizing two damage indices,one based on dissipated energy and the other on displacement and dissipated energy.The cumulative energy dissipation curves obtained by the average IDA capacity curves with and without SSI are presented as a function of the base shear,and these curves allow one to obtain the two critical points and the different limit states of the structure.It is observed that the SSI and GSI significantly influence the seismic response and capacity of the studied structure,particularly at higher levels of PGA.Moreover,the effect of the SSI reduces the damage index of the studied structure by 4%.

Study on the tunnel shape and soil-lining interaction influencing the lining behavior under seismic loading

The response of tunnels subjected to seismic loading is a complex mechanism and depends not only on the seismic nature but also on tunnel structure and surrounding soil properties.The individual behavior of circular,rectangular,and sub-rectangular tunnels subjected to seismic loadings has already been studied in the literature.In the present research,two case scenarios of circular,rectangular tunnels and four sub-rectangular shaped tunnels,with similar cross-section areas,were adopted to perform a comprehensive numerical investigation.The purpose of the study was to determine the mechanical behavior of tunnels of different shapes,depending upon seismic conditions.Analyses were performed by considering the influence of soil-lining interaction,soil parameters,and lining thickness,as well as lining rigidity.Computations were performed for no-slip and full-slip conditions.The results indicate that the tunnel shape design is of great importance when regarding the mechanical behavior of the surrounding soil.This concerns no-slip as well as full-slip soil-lining interaction,especially when the lining is subjected to seismic loading.Moreover,it is shown that changes in incremental bending moments for circular,rectangular and sub-rectangular tunnels that depend upon the soil-lining interaction conditions differ significantly.

Comparison between seismic analysis of twisting and regular 52-story towers considering soil-structure interaction

A dynamic analysis of both twisting and regular towers is carried out to determine the results of considering soil-structure interaction(SSI)on high-rise buildings.In addition,the difference between the seismic performance of using twisting towers over regular ones is investigated.The twisting tower is a simulation of the Evolution Tower(Moscow).The towers’skeletons consist of RC elements and rest on a reinforced concrete piled-raft foundation.The soil model is considered as multi-layered with the same soil properties as the zone chosen for the analysis(New Mansoura City,Egypt).The only difference between both towers is their shape in elevation.The whole system is modelled and analyzed in a single step as one full 3D model,which is known as the direct approach in SSI.All analyses are carried out using finite-element software(Midas GTS NX).Dynamic output responses due to three records of seismic loads are proposed and presented in some graphs.Based on the results,it is concluded that SSI has a considerable effect on the dynamic response of tall buildings mainly because of the foundation flexibility,as it leads to lengthening the vibration period,increasing the story drift and the base shear for both cases.

An extended multiple-support response spectrum method incorporating fluid-structure interaction for seismic analysis of deep-water bridges

The effects of ground motion spatial variability(GMSV)or fluid-structure interaction(FSI)on the seismic responses of deep-water bridges have been extensively examined.However,there are few studies on the seismic performance of bridges considering GMSV and FSI effects simultaneously.In this study,the original multiple-support response spectrum(MSRS)method is extended to consider FSI effect for seismic analysis of deep-water bridges.The solution of hydrodynamic pressure on a pier is obtained using the radiation wave theory,and the FSI-MSRS formulation is derived according to the random vibration theory.The influence of FSI effect on the related coefficients is analyzed.A five-span steel-concrete continuous beam bridge is adopted to conduct the numerical simulations.Different load conditions are designed to investigate the variation of the bridge responses when considering the GMSV and FSI effects.The results indicate that the incoherence effect and wave passage effect decrease the bridge responses with a maximum percentage of 86%,while the FSI effect increases the responses with a maximum percentage of 26%.The GMSV and FSI effects should be included in the seismic design of deep-water bridges.

Nonlinear anisotropic finite element analysis of liquefiable tunnel–sand–pile interaction under seismic excitation

Nonlinear time‐history analysis can be used to determine the liquefiable behaviors of the tunnel-sand-pile interaction(TSPI)model with the consideration of sand anisotropy.This study presents the nonlinear response of the TSPI model with the existence of liquefaction under seismic excitation.The analysis reveals that tunnel and pile behave as isotropic elements,while sand shows isotropic,orthotropic,and anisotropic characteristics.Three constitutive models including UBC3D‐PLM(two yield surfaces associated with the hardening rule),NGI‐ADP(yielding with associated plastic potential function),and a user‐specified constitutive model are adopted to evaluate the isotropic,orthotropic,and anisotropic behaviors of sand.On this basis,two finite element‐based codes(ETABS 18.1.1 and Plaxis 3D)are used to evaluate sand behaviors and responses.Responses of the tunnel,sand,pile,and excess pore pressure ratio are recorded in the interaction zone by varying the pile diameter,tunnel diameter,and tunnel-pile clearance.Compared with the orthotropic and isotropic conditions,lower variations of results are found in the anisotropic condition,except for the case of generation of excess pore pressure.In addition,the present reanalysis results are in agreement with previous analytical and case study results,which further indicates the effectiveness of the finite element‐based numerical codes.

Seismic wave input method for three-dimensional soil-structure dynamic interaction analysis based on the substructure of artificial boundaries

The method of inputting the seismic wave determines the accuracy of the simulation of soil-structure dynamic interaction. The wave method is a commonly used approach for seismic wave input, which converts the incident wave into equivalent loads on the cutoff boundaries. The wave method has high precision, but the implementation is complicated, especially for three-dimensional models. By deducing another form of equivalent input seismic loads in the fi nite element model, a new seismic wave input method is proposed. In the new method, by imposing the displacements of the free wave fi eld on the nodes of the substructure composed of elements that contain artifi cial boundaries, the equivalent input seismic loads are obtained through dynamic analysis of the substructure. Subsequently, the equivalent input seismic loads are imposed on the artifi cial boundary nodes to complete the seismic wave input and perform seismic analysis of the soil-structure dynamic interaction model. Compared with the wave method, the new method is simplifi ed by avoiding the complex processes of calculating the equivalent input seismic loads. The validity of the new method is verifi ed by the dynamic analysis numerical examples of the homogeneous and layered half space under vertical and oblique incident seismic waves.

Numerical analysis on seismic response of Shinkansen bridge-train interaction system under moderate earthquakes

This study is intended to evaluate the influence of dynamic bridge-train interaction （BTI） on the seismic response of the Shinkansen system in Japan under moderate earthquakes. An analytical approach to simulate the seismic response of the BTI system is developed. In this approach, the behavior of the bridge structure is assumed to be within the elastic range under moderate ground motions. A bullet train car model idealized as a sprung-mass system is established. The viaduct is modeled with 3D finite elements. The BTI analysis algorithm is verified by comparing the analytical and experimental results. The seismic analysis is validated through comparison with a general program. Then, the seismic responses of the BTI system are simulated and evaluated. Some useful conclusions are drawn, indicating the importance of a proper consideration of the dynamic BTI in seismic design.

Seismic response of tall building considering soil-pile-structure interaction

The seismic behavior of tall buildings can he greatly affected by non-linear soil-pile interaction during strong earthquakes.In this study a 20-storey building is examined as a typical structure supported on a pile foundation for different conditions:(1) rigid base,i.e.no deformation in the foundation:(2) linear soil-pile system;and (3) nonlinear soil-pile system. The effects of pile foundation displacements on the behavior of tall building are investigated,and compared with the behavior of buildings supported on shallow foundation.With a model of non-reflective boundary between the near field and far field, Novak's method of soil-pile interaction is improved.The computation method for vibration of pile foundations and DYNAN computer program are introduced comprehensively.A series of dynamic experiments have been done on full-scale piles, including single pile and group,linear vibration and nonlinear vibration,to verify the validity of boundary zone model.

Effect of nonlinear soil-structure interaction on seismic response of low-rise SMRF buildings

The nonlinear behavior of a soil-foundation system may alter the seismic response of a structure by providing additional flexibility to the system and dissipating hysteretic energy at the soil-foundation interface. However, the current design practice is still reluctant to consider the nonlinearity of the soil-foundation system, primarily due to lack of reliable modeling techniques. This study is motivated towards evaluating the effect of nonlinear soil-structure interaction （SSI） on the seismic responses of low-rise steel moment resisting frame （SMRF） structures. In order to achieve this, a Winkler- based approach is adopted, where the soil beneath the foundation is assumed to be a system of closely-spaced, independent, nonlinear spring elements. Static pushover analysis and nonlinear dynamic analyses are performed on a 3-story SMRF building and the performance of the structure is evaluated through a variety of force and displacement demand parameters. It is observed that incorporation of nonlinear SSI leads to an increase in story displacement demand and a significant reduction in base moment, base shear and inter-story drift demands, indicating the importance of its consideration towards achieving an economic, yet safe seismic design.

Extended consecutive modal pushover procedure for estimating seismic responses of one-way asymmetric plan tall buildings considering soil-structure interaction

Performance based design becomes an effective method for estimating seismic demands of buildings. In asymmetric plan tall building the effects of higher modes and torsion are crucial. The consecutive modal pushover （CMP） procedure is one of the procedures that consider these effects. Also in previous studies the influence of soil-structure interaction （SSI） in pushover analysis is ignored. In this paper the CMP procedure is modified for one-way asymmetric plan mid and high-rise buildings considering $SI. The extended CMP （ECMP） procedure is proposed in order to overcome some limitations of the CMP procedure. In this regard, 10, 15 and 20 story buildings with asymmetric plan are studied considering SSI assuming three different soil conditions. Using nonlinear response history analysis under a set of bidirectional ground motion; the exact responses of these buildings are calculated. Then the ECMP procedure is evaluated by comparing the results of this procedure with nonlinear time history results as an exact solution as well as the modal pushover analysis procedure and FEMA 356 load patterns. The results demonstrate the accuracy of the ECMP procedure.

Evaluation of Dynamic Soil-Structure Interaction and Dynamic Seismic Soil Pressures Acting on It Subjected to Strong Earthquake Motions

In order to clarify the damage mechanism of the subway structure, the dynamic soil-structure interaction and the dynamic forces acting on the structure, a series of shaking table tests and simulation analyses were performed. The seismic response of the structure and the dynamic forces acting on the structure due to sinusoidal and random waves were investigated with special attention to the dynamic soil-structure interaction. The result shows that the compression seismic soil pressures and extension seismic soil pressures simultaneously act on the sidewalls, and big shear stress also acts on the ceiling slab due to horizontal excitation. The seismic soil pressure could be approximated to hyperbola curve, and reached a peak value with increase of the shear strain of the model ground. In addition, a slide and exfoliation phenomenon between the structure and the surrounding ground was simulated, using the nonlinear analyses. The foundation is provided for amending the calculation method of seismic soil pressure and improving the anti-earthquake designing level of underground structure.

DEEP SEISMIC SOUNDING EVIDENCE FOR TECTONIC INTERACTION BETWEEN TARIM AND WEST KUNLUN MT

The Tarim basin, located in the northern margin of Tibet, plays a key role in comprehending Tibetan plateau rapid uplift process. Focuses have been on the contribution of basin block to create high mountain (e.g.,Chen and Molnar,1977, Molnar et al.,1993, Ph. Matte, Tapponnier et al.,1996) since 1970. The models, which mainly depend on result of geological survey and other geophysical observation in the region excepted Deep Seismic Sounding, remained unsure because of blank(or absence ) of DSS data until our experiment was performed. How Tarim and west Kunlun to contact in depth ? What different is in crust structure between Tarim and west Kunlun Mt.? This is what we will reply to in our program.We finished the program in 1997. A total of 120 set seismograms (with 3\|component sensors) and 18000kg (AT and TNT) dynamos were used for the DSS field project. 6 shot in Tarim basin and 1 shot in west Kunlun Mt. (Quanshuigou) had been shoot successfully. One shot (Pishan shot) is used as fan\|shape observation (offset is from 150km to 220km) in 6 shots located in Tarim basin. The survey line is along Hotan river across the Tarim basin from the north to the south. In particular, we carried 20 set seismic recorders to Kunlun Mt. to make a short line about 60 km as the southern tendency of our line. The seismic recorders were placed in an interval of 3km from one stations to the next and covered a distance of more than 300km. The stations have to be moved their location per 2\|shotting to form a meeting system or a tracing system (layout). Fig.1 showed our survey line and location of shot as well as recorder stations. Finally we gained 625 cassettes with original seismic record (include cassettes of shooting time recorder et al.). After data process total 1147 quite high\|quality three\|component digital records have been used to analyze. Here, only results of analyzing P wave data is given.

Zonal Coupling Analysis Method of Seismic Response of Offshore Monopile Wind Turbine

The seismic safety of offshore wind turbines is an important issue that needs to be solved urgently.Based on a unified computing framework,this paper develops a set of seawater-seabed-wind turbine zoning coupling analysis methods.A 5 MW wind turbine and a site analysis model are established,and a seismic wave is selected to analyze the changes in the seismic response of offshore monopile wind turbines under the change of seawater depth,seabed wave velocity and seismic wave incidence angle.The analysis results show that when the seawater increases to a certain depth,the seismic response of the wind turbine increases.The shear wave velocity of the seabed affects the bending moment and displacement at the bottom of the tower.When the angle of incidence increases,the vertical displacement and the acceleration of the top of the tower increase in varying degrees.

A novel simple procedure to consider seismic soil structure interaction effects in 2D models

A method is proposed to estimate the seismic soil-structure-interaction （SSI） effects for use in engineering practice. It is applicable to 2D structures subjected to vertically incident shear waves supported by homogenous half-spaces. The method is attractive since it keeps the simplicity of the spectral approach, overcomes some of the difficulties and inaccuracies of existing classical techniques and yet it considers a physically consistent excitation. This level of simplicity is achieved through a response spectra modification factor that can be applied to the free-field 5%-damped response spectra to yield design spectral ordinates that take into account the scattered motions introduced by the interaction effects. The modification factor is representative of the Transfer Function （TF） between the structural relative displacements and the free- field motion, which is described in terms of its maximum amplitude and associated frequency. Expressions to compute the modification factor by practicing engineers are proposed based upon a parametric study using 576 cases representative of actual structures. The method is tested in 10 cases spanning a wide range of common fundamental vibration periods.

Comparative Analysis of Seismic Response Characteristics of Pile-Soil-Stnicture Interaction System

The study on the earthquake-resistant performance of a pile-soil-structure interaction system is a relatively complicated and primarily important issue in civil engineering practice. In this paper, a computational model and computation procedures for pile-supported structures, which can duly consider the pile-soil interaction effect, arc established by the finite clement method. Numerical implementation is made in the time domain. A simplified approximation for the seismic response analysis of pile-soil-structure systems is briefly presented. Then a comparative study is performed for an engineering example with numerical results computed respectively by the finite clement method and the simplified method. Through comparative analysis, it is shown that the results obtained by the simplified method well agree with those achieved by the finite element method. The numerical results and findings will offer instructive guidelines for earthquake-resistant analysis and design of pile-supported structures.

Influence of Structure Plane Size on Seismic Response of Soil-Structure Interaction

The influence of the change of structure plane size on seismic response was studied for a soil-structure interaction system.Based on the finite element method,a soil-structure interaction calculation model was established to analyze the seismic response by changing the structure plane size and choosing different earthquake waves for different soil fields.The results show that when the natural periods of vibration for different structure plane sizes are close,under the same earthquake wave,the total displacement on the top layer of the structure and the foundation rotation displacement decrease with the increase of structure plane size,and the proportion of superstructure elastic selfdeformation displacement to the total displacement increases with the increase of structure plane size.While for different types of sites and seismic waves,under the horizontal and vertical seismic waves,the seismic responses of different plane sizes have a similar change rule.

Seismic Response Analysis of Silo-Stock-Foundation Interaction System

To analyze the response law of silo-stock-foundation interaction system under seismic load, a dynamic equation of this interaction system was established. Furthermore, the dynamic characteristics of the silo-stock-foundation interaction system under different storage conditions were studied through numerical analysis. The displacement at the silo top was much greater than that at the silo bottom, while the vibration trend of the upper and lower silos on the same bus bar was similar. The acceleration response, dis-placement and stress response of the structure increased with the increase of the input seismic wave. Furthermore, the direction time responses of several typical silo parts were consistent. With increase in storage material, the acceleration peak of the silo and bulk material increased and then decreased. This indicates that the relative motion of the storage material and silo had a damping effect on the silo system. The maximum circumferential strain and equivalent stress of silos with different storage capacities were recorded at the variable section of silos (the top of funnel). The effective stress beneath foundations near silos was obviously higher than that far away from silos. These results can provide a reliable theoretical basis and reference values for mitigating silo structural failures under seismic load.

Seismic response of pile-supported structures considering the coupling of inertial and kinematic interactions in different soil sites

Dynamic soil−pile−superstructure interaction is crucial for understanding pile behavior in earthquake-prone ground.Evaluating the safety of piles requires determining the seismic bending moment caused by combined inertial and kinematic interactions,which is challenging.This paper addresses this problem through numerical simulations of piles in different soil sites,considering soil nonlinearity.Results reveal that the period of the soil site significantly affects the interaction among soil,piles,and structures.Bending moments in soft and hard soil sites exceed those in medium soil sites by more than twice.Deformation modes of piles exhibit distinct characteristics between hard and soft soil sites.Soft soil sites exhibit a singular inflection point,while hard soil sites show two inflection points.In soft soil sites,pile-soil kinematic interaction gradually increases bending moment from tip to head,with minor influence from superstructure’s inertial interaction.In hard soil sites,significant inertial effects from soil,even surpassing pile-soil kinematic effects near the tip,lead to reversed superposition bending moment.Superstructure’s inertial interaction notably impacts pile head in hard soil sites.A simplified coupling method is proposed using correlation coefficient to represent inertial and kinematic interactions.These findings provide insights into complex seismic interactions among soil,piles,and structures.

Shake table test of soil-pile groups-bridge structure interaction in liquefiable ground

This paper describes a shake table test study on the seismic response of low-cap pile groups and a bridge structure in liquefiable ground. The soil profile, contained in a large-scale laminar shear box, consisted of a horizontally saturated sand layer overlaid with a silty clay layer, with the simulated low-cap pile groups embedded. The container was excited in three E1 Centro earthquake events of different levels. Test results indicate that excessive pore pressure （EPP） during slight shaking only slightly accumulated, and the accumulation mainly occurred during strong shaking. The EPP was gradually enhanced as the amplitude and duration of the input acceleration increased. The acceleration response of the sand was remarkably influenced by soil liquefaction. As soil liquefaction occurred, the peak sand displacement gradually lagged behind the input acceleration; meanwhile, the sand displacement exhibited an increasing effect on the bending moment of the pile, and acceleration responses of the pile and the sand layer gradually changed from decreasing to increasing in the vertical direction from the bottom to the top. A jump variation of the bending moment on the pile was observed near the soil interface in all three input earthquake events. It is thought that the shake table tests could provide the groundwork for further seismic performance studies of low-cap pile groups used in bridges located on liquefiable groun.

Dynamic Analysis of A 5-MW Tripod Offshore Wind Turbine by Considering Fluid–Structure Interaction

Fixed offshore wind turbines usually have large underwater supporting structures. The fluid influences the dynamic characteristics of the structure system. The dynamic model of a 5-MW tripod offshore wind turbine considering the pile-soil system and fluid structure interaction （FSI） is established, and the structural modes in air and in water are obtained by use of ANSYS. By comparing low-order natural frequencies and mode shapes, the influence of sea water on the free vibration characteristics of offshore wind turbine is analyzed. On basis of the above work, seismic responses under excitation by E1-Centro waves are calculated by the time-history analysis method. The results reveal that the dynamic responses such as the lateral displacement of the foundation and the section bending moment of the tubular piles increase substantially under the influence of the added-mass and hydrodynamic pressure of sea water. The method and conclusions presented in this paper can provide a theoretical reference for structure design and analysis of offshore wind turbines fixed in deep seawater.