期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Seismic failure modes and seismic safety of Hardfill dam 被引量:6
1
作者 Kun XIONG Yong-hong WENG Yun-long H 《Water Science and Engineering》 EI CAS CSCD 2013年第2期199-214,共16页
Based on microscopic damage theory and the finite element method, and using the Weibull distribution to characterize the random distribution of the mechanical properties of materials, the seismic response of a typical... Based on microscopic damage theory and the finite element method, and using the Weibull distribution to characterize the random distribution of the mechanical properties of materials, the seismic response of a typical Hardfill dam was analyzed through numerical simulation during the earthquakes with intensities of 8 degrees and even greater. The seismic failure modes and failure mechanism of the dam were explored as well. Numerical results show that the Hardfill dam remains at a low stress level and undamaged or slightly damaged during an earthquake with an intensity of 8 degrees. During overload earthquakes, tensile cracks occur at the dam surfaces and extend to inside the dam body, and the upstream dam body experiences more serious damage than the downstream dam body. Therefore, under the seismic conditions, the failure pattern of the Hardfill dam is the tensile fracture of the upstream regions and the dam toe. Compared with traditional gravity dams, Hardfill dams have better seismic performance and ~reater seismic safety. 展开更多
关键词 Hardfill dam seismic failure mode seismic safety microscopic damage model
下载PDF
Seismic failure mode improvement of RC frame structure based on multiple lateral load patterns of pushover analyses 被引量:14
2
作者 BAI JiuLin OU JinPing 《Science China(Technological Sciences)》 SCIE EI CAS 2011年第11期2825-2833,共9页
The structural failure under severe ground motions is primarily caused by their unreasonable seismic failure mode (SFM). This paper provides a methodology aiming at the SFM improvement of reinforced concrete frame str... The structural failure under severe ground motions is primarily caused by their unreasonable seismic failure mode (SFM). This paper provides a methodology aiming at the SFM improvement of reinforced concrete frame structure. An RC frame is modeled and three types of failure criterion are defined as the premise of SFM. Static pushover analysis is adopted to identify the SFM. The dominant failure modes and failure paths of the structure are obtained in three lateral load patterns (inverted trian- gular distribution, uniform distribution and adaptive distribution). Based on the pushover analysis, the sequential failure of components and the probability of the occurrence of plastic hinges are determined. By this, weak components of the structure are detected and herein are strengthened. The project cost of the proposed strengthening strategy increases by 2.4%. Capacity spectrum method is used to study the performance of the strengthening structure. Pushover analysis is conducted again to present the improvement of strength and ductility. Lateral drift and local response through IDA are also studied to indicate that the strengthening of some columns and beams can improve the SFM to enhance the seismic capacity of structure. 展开更多
关键词 seismic failure modes (SFM) IMPROVEMENT failure path PUSHOVER incremental dynamic analysis (IDA)
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部