In order to solve the problems of the fine division of sedimentary sequence cycles and their change in two-dimensional space as well as lateral extension contrast, we developed a method of wavelet depth-frequency anal...In order to solve the problems of the fine division of sedimentary sequence cycles and their change in two-dimensional space as well as lateral extension contrast, we developed a method of wavelet depth-frequency analysis. The single signal and composite signal of different Milankovitch cycles are obtained by numerical simulation. The simulated composite signal can be separated into single signals of a single frequency cycle. We also develop a well-seismic calibration insertion technology which helps to realize the calibration from the spectrum characteristics of a single well to the seismic profile. And then we determine the change and distribution characteristics of spectrum cycles in the two-dimensional space. It points out the direction in determining the variations of the regional sedimentary sequence cycles, underground strata structure and the contact relationship.展开更多
The ProP waveform data obtained from a deep seismic sounding profile, which ran through Zhangbei seismic region, were processed by means of both seismic wave complexity coefficient and frequency spectrum analysis meth...The ProP waveform data obtained from a deep seismic sounding profile, which ran through Zhangbei seismic region, were processed by means of both seismic wave complexity coefficient and frequency spectrum analysis methods, and the complexity characteristics of crest-mantle boundary beneath the studied area and its adjacent region were determined. The results show that the place below epicenter can be taken as boundary, the northern side of which is Inner Mongolia axis with small complexity coefficient and the southern side of which is Huai＇an basin with large complexity coefficient. The different spectrum patterns at the two sides of the epicenter were inferred from spectrum analysis. In the epicentral area, there have been multi-period magmatic eruptions since Meso-Cenozoic and craters exist at the surface. From the velocity imaging of middle and upper crust in Zhangbei seismic region it can be found that there are crustal low velocity bodies around the craters and also there are low velocity zones, which went into deep crust. It is suggested that the distinct zones of crust-mantle boundary complexity may be the margin, where the magma had intruded due to magma activity in Meso-Cenozoic. The southern side with large complexity coefficient is deep magmatic activity area and the northern side with small complexity coefficient is stable crust-mantle tectonics. The difference of crust-mantle complexity provides deep background for the development of strong earthquake.展开更多
The Fuyang oil-layer in North Songliao Basin is characterized by thin interbedded sands and shales, strong lateral variation, strong reservoir heterogeniety, and so on. The thickness of individual sand layers is gener...The Fuyang oil-layer in North Songliao Basin is characterized by thin interbedded sands and shales, strong lateral variation, strong reservoir heterogeniety, and so on. The thickness of individual sand layers is generally 3 - 5 m. Identifying the channel sand-bodies of the Fuyang oil layer using seismic techniques is very difficult due to the low seismic resolution. Taking the GTZ area as an example, we discuss the genetic characteristics of the channel sand-bodies and point out the real difficulty in using seismic techniques to predict the channel sand-bodies. Two methods for the identification of channels are presented： frequency spectrum imaging and pre-stack azimuthal anisotropy. Identifying the channel sand-bodies in Fuyu oil-layer using the two seismic methods results in a success rate up to 80% compared with well data.展开更多
Seismic tomography is a new geophysical technique being developed to meet the needs of mining and engineering projects. Attenuation tomography, as one kind of seismic tomography technique, is a powerful prospecting to...Seismic tomography is a new geophysical technique being developed to meet the needs of mining and engineering projects. Attenuation tomography, as one kind of seismic tomography technique, is a powerful prospecting tool for determining structure defaults such as fault, broken zone, and hidden voids, but it has been little discussed up to now. Its principle and applications are presented in detail. Attenuation tomography technology includes the following main points. First, on the basis of spectrum analysis to each seismic record, geometric correction is conducted, then common source parameters are introduced into common shot records in order to keep absorption effect of the geological media separate from source spectrum influence. Finally, an equation set is obtained which consists of absorption coefficients, common source parameters and energy field data observed. This technique can be employed together with velocity tomography to provide more evidence for engineering and geological diagnosis. Its applications to exploration of mineral and engineering have led to satisfactory results.展开更多
基金supported by the Fundamental Research Funds for the Central Universities(Grant No.2011YYL128)the CNPC Innovation Foundation(GrantNo.2012D-5006-0103)the Ministry of Land and Resources special funds for scientific research on public cause(Grant No.201311107)
文摘In order to solve the problems of the fine division of sedimentary sequence cycles and their change in two-dimensional space as well as lateral extension contrast, we developed a method of wavelet depth-frequency analysis. The single signal and composite signal of different Milankovitch cycles are obtained by numerical simulation. The simulated composite signal can be separated into single signals of a single frequency cycle. We also develop a well-seismic calibration insertion technology which helps to realize the calibration from the spectrum characteristics of a single well to the seismic profile. And then we determine the change and distribution characteristics of spectrum cycles in the two-dimensional space. It points out the direction in determining the variations of the regional sedimentary sequence cycles, underground strata structure and the contact relationship.
基金Joint Seismological Science Foundation of China (104027 and 102025).
文摘The ProP waveform data obtained from a deep seismic sounding profile, which ran through Zhangbei seismic region, were processed by means of both seismic wave complexity coefficient and frequency spectrum analysis methods, and the complexity characteristics of crest-mantle boundary beneath the studied area and its adjacent region were determined. The results show that the place below epicenter can be taken as boundary, the northern side of which is Inner Mongolia axis with small complexity coefficient and the southern side of which is Huai＇an basin with large complexity coefficient. The different spectrum patterns at the two sides of the epicenter were inferred from spectrum analysis. In the epicentral area, there have been multi-period magmatic eruptions since Meso-Cenozoic and craters exist at the surface. From the velocity imaging of middle and upper crust in Zhangbei seismic region it can be found that there are crustal low velocity bodies around the craters and also there are low velocity zones, which went into deep crust. It is suggested that the distinct zones of crust-mantle boundary complexity may be the margin, where the magma had intruded due to magma activity in Meso-Cenozoic. The southern side with large complexity coefficient is deep magmatic activity area and the northern side with small complexity coefficient is stable crust-mantle tectonics. The difference of crust-mantle complexity provides deep background for the development of strong earthquake.
文摘The Fuyang oil-layer in North Songliao Basin is characterized by thin interbedded sands and shales, strong lateral variation, strong reservoir heterogeniety, and so on. The thickness of individual sand layers is generally 3 - 5 m. Identifying the channel sand-bodies of the Fuyang oil layer using seismic techniques is very difficult due to the low seismic resolution. Taking the GTZ area as an example, we discuss the genetic characteristics of the channel sand-bodies and point out the real difficulty in using seismic techniques to predict the channel sand-bodies. Two methods for the identification of channels are presented： frequency spectrum imaging and pre-stack azimuthal anisotropy. Identifying the channel sand-bodies in Fuyu oil-layer using the two seismic methods results in a success rate up to 80% compared with well data.
文摘Seismic tomography is a new geophysical technique being developed to meet the needs of mining and engineering projects. Attenuation tomography, as one kind of seismic tomography technique, is a powerful prospecting tool for determining structure defaults such as fault, broken zone, and hidden voids, but it has been little discussed up to now. Its principle and applications are presented in detail. Attenuation tomography technology includes the following main points. First, on the basis of spectrum analysis to each seismic record, geometric correction is conducted, then common source parameters are introduced into common shot records in order to keep absorption effect of the geological media separate from source spectrum influence. Finally, an equation set is obtained which consists of absorption coefficients, common source parameters and energy field data observed. This technique can be employed together with velocity tomography to provide more evidence for engineering and geological diagnosis. Its applications to exploration of mineral and engineering have led to satisfactory results.
