Impact of Earthquake Action on the Design and Sizing of Jointed Masonry Structures in South Kivu, DRC

This article deals with the investigation of the effects of seismic impacts on the design and dimensioning of structures in South Kivu. The starting point is the observation of an ambivalence that can be observed in the province, namely the non-consideration of seismic action in the study of structures by both professionals and researchers. The main objective of the study is to show the importance of dynamic analysis of structures in South Kivu. It adopts a meta-analytical approach referring to previous researches on South Kivu and proposes an efficient and optimal method. To arrive at the results, we use Eurocode 7 and 8. In addition, we conducted static analysis using the Coulomb method and dynamic analysis using the Mononobe-Okabe method and compared the results. At Nyabibwe, the results showed that we have a deviation of 24.47% for slip stability, 12.038% for overturning stability and 9.677% for stability against punching through a weight wall.

Joint inversion of gravity and seismic data along a profile across the seismogenic fault of 2010 Yushu Ms7. 1 earthquake

Yushu Ms7.1 earthquake occurred on the Ganzi-Yushu fault zone, across which we carried out a joint relative-gravity and seismic-reflection survey, and then performed a gravity inversion constrained by the seismic-reflection result. Based on the data of complete Bouguer gravity anomaly and seismic reflection, we obtained a layered interface structure in deep crust down to Moho. Our study showed that the inversion could reveal the interfaces of strata along the survey profile and the directions of regional faults in two-dimension. From the characteristics of the observed topography of the Moho basement, we tentatively confirmed that the uplift of eastern edge of Qinghai-Tibet plateau was caused by the subduetion of the Indian plate.

Seismic behavior and mechanism analysis of innovative precast shear wall involving vertical joints

To study the seismic performance and load-transferring mechanism of an innovative precast shear wall(IPSW) involving vertical joints, an experimental investigation and theoretical analysis were successively conducted on two test walls. The test results confirm the feasibility of the novel joints as well as the favorable seismic performance of the walls, even though certain optimization measures should be taken to improve the ductility. The load-transferring mechanism subsequently is theoretically investigated based on the experimental study. The theoretical results show the load-transferring route of the novel joints is concise and definite. During the elastic stage, the vertical shear stress in the connecting steel frame(CSF) distributes uniformly; and each high-strength bolt(HSB)primarily delivers vertical shear force. However, the stress in the CSF redistributes when the walls develop into the elastic-plastic stage. At the ultimate state, the vertical shear stress and horizontal normal stress in the CSF distribute linearly; and the HSBs at both ends of the CSF transfer the maximum shear forces.

Seismic stability of jointed rock slopes under obliquely incident earthquake waves

Seismic stability of slopes has been traditionally analyzed with vertically propagated earthquake waves.However,for rock slopes,the earthquake waves might approach the outcrop still with a evidently oblique direction.To investigate the impact of obliquely incident earthquake excitations,the input method for SV and P waves with arbitrary incident angles is conducted,respectively,by adopting the equivalent nodal force method together with a viscous-spring boundary.Then,the input method is introduced within the framework of ABAQUS software and verified by a numerical example.Both SV and P waves input are considered herein for a 2 D jointed rock slope.For the jointed rock mass,the jointed material model in ABAQUS software is employed to simulate its behavior as a continuum.Results of the study show that the earthquake incident angles have significance on the seismic stability of jointed rock slopes.The larger the incident angle,the greater the risk of slope instability.Furthermore,the stability of the jointed rock slopes also is affected by wave types of earthquakes heavily.P waves induce weaker responses and SV waves are shown to be more critical.

Stochastic seismic wave interaction with a rock joint having Coulomb-slip behavior

Seismic wave interaction with a slippery rock joint with an arbitrary impinging angle is analytically studied based on the conservation of momentum on the wave fronts. Based on the displacement discontinuity method, the wave propagation equations are derived for incident P- and S-waves. By comparison, the calculated transmission and reflection coefficients for normal incident waves are the same as the existing results, which proves the wave propagation equation obtained in the paper is correct. The wave propagation derived in the context can be applied to incident waves with different waveforms. Stochastic seismic waves are then used to analyze the seismic wave interaction with the slippery rock joint, where the stochastic seismic waves are generated from frequency spectra. The parametric studies are carried out to investigate the effect of type, intensity and impinging angle of the incident seismic waves on the wave propagation across the slippery rock joint.

Sino-France Joint Venture for Seismic Apparatus

Ｓｉｎｏ－ＦｒａｎｃｅＪｏｉｎｔＶｅｎｔｕｒｅｆｏｒＳｅｉｓｍｉｃＡｐｐａｒａｔｕｓＷａｎｇＫｉｙｕＸｉ＇ａｎＰｅｔｒｏｌｅｕｍＥｘｐｌｏｒａｔｉｏｎＩｎｓｔｒｕｍｅｎｔｓＰｌａｎｔａｎｄＳｅｒｃｅｌ，ａＦｒｅｎｃｈｃｏｍｐａｎｙ，ｓｉｇｎｅｄａｃｏ...

Seismic performance and global ductility of RC frames rehabilitated with retrofi tted joints by CFRP laminates

This paper presents a new FRP retrofi tting scheme to strengthen local beam-column joints in reinforced concrete(RC) frames.The new retrofi tting scheme was proposed following a preliminary study of four different existing retrofi tting schemes.A numerical simulation was conducted to evaluate the effectiveness of FRP-strengthened reinforced concrete frames by bridging behavior of local joints to the whole structure.Local confi nement effects due to varying retrofi tting schemes in the joints were simulated in the frame model.The seismic behavior factor was used to evaluate the seismic performance of the strengthened RC frames.The results demonstrated that the new proposed retrofi tting scheme was robust and promising,and fi nite element analysis appropriately captured the strength and global ductility of the frame due to upgrading of the local joints.

装配式混凝土剪力墙结构接缝连接研究进展

装配式剪力墙结构拼装时存在大量的水平接缝和竖向接缝,由于剪力墙的刚度较大,接缝连接处易存在刚度不足引起的损伤集聚问题,成为影响结构整体性和抗震性能的决定性因素。总结了国内外正在发展的预制装配式剪力墙结构水平和竖向接缝的连接形式,并对各类连接形式的构造特点、抗震性能、应用优势和技术瓶颈进行了系统阐述和分析,在此基础上探讨了装配式剪力墙结构接缝连接技术的发展方向。结果表明:目前湿式连接技术已较为成熟且被广泛应用,但仍存在现场湿作业量大、质量不易检测和控制等问题;干式连接技术工业化程度高,但对施工精度的要求也高,可能产生的螺栓松动、锈蚀以及磨损问题限制了其工程应用;将消能减震技术融入竖向接缝连接,利用超高性能混凝土实现水平接缝连接,并结合可恢复功能防震技术,是未来装配式剪力墙结构高质量发展的新增长点。

中国石化油藏地球物理二十年发展与思考

油藏地球物理技术是综合应用多种地球物理资料与油藏动静态信息进行复杂油藏精细表征和动态监测的跨学科技术,对于提高油藏的储量动用程度和提高采收率具有重要的意义,是当前地球物理技术的重要发展方向。系统回顾了中国石化油藏地球物理提出的背景和过去二十年的发展历程,梳理了油藏地球物理技术系列,总结了在油藏地球物理基础研究、井中地球物理技术、多尺度资料联合反演、地球物理约束确定性建模、时移地震剩余油气预测、地震地质工程一体化、微地震油藏监测等方面的技术创新和应用效果。面对中国油气田勘探开发的深层、深水、非常规及老油田(“两深一非一老”)形势和一体化、智能化、绿色化挑战,油藏地球物理在油气产业技术致胜阶段仍然大有可为,要持续创新油藏地球物理技术,井、震、动、模一体化联合和人工智能应用,构建高水平的油藏地球物理勘探开发一体化、地质工程一体化解决方案,支撑油藏全生命周期建设。

钢管混凝土柱-钢梁外加强环螺栓连接节点抗震性能有限元分析

为深入研究钢管混凝土柱-钢梁外加强环螺栓连接节点的抗震性能,建立了螺栓连接节点的精细化三维实体有限元模型。在对已有试验成果进行验证分析的基础上,研究加劲肋、螺栓连接数量对节点塑性耗能分配机制的影响。结果表明:当钢材本构后期考虑韧性损伤后,有限元计算结果与已有拟静力试验结果更吻合;CFST-1节点(梁高300 mm,有螺栓垫板)耗能能力最优,但仅达到相应焊接节点的一半;与CFST-1节点相比,CFST-3节点(梁高300 mm,无螺栓垫板)及CFST-2节点(梁高250 mm,有螺栓垫板)的总耗能更低;各螺栓节点的塑性耗能分配机制主要依靠梁耗能,而相应的加强环焊接节点主要依靠梁与加强环耗能;当螺栓节点采用环板加劲肋、4排螺栓以及腹板加劲肋构造优化后,刚度、承载力、延性与相应焊接节点一致,总塑性耗能达到刚接节点的79.1%,基本达到刚接节点的抗震水平。

单边螺栓T型钢连接梁柱节点地震损伤性能评估

随着装配式钢结构在建筑工程领域的应用日益广泛,单边螺栓连接作为一种高效、便捷的连接方式,逐渐受到业界的青睐。H型钢梁、方钢管柱通过T型钢连接件和单边螺栓连接技术形成新型装配式钢框架结构,梁柱节点作为整个框架体系的核心,其抗震性能对整体结构的影响至关重要。为评估单边螺栓T型钢连接梁柱节点在地震过程中的损伤情况,开展了4种不同刚度单边螺栓T型钢连接梁柱节点的拟静力试验。通过试验,获得了单边螺栓T型钢连接梁柱节点的破坏模式、滞回性能和初始转动刚度,分析了不同刚度的T型钢连接件对梁柱节点的破坏模式、抗弯承载能力和转动刚度退化的影响。采用考虑残余变形累积损伤修正的Park-Ang损伤指数模型研究了试验中节点的损伤演化规律,结果表明:所提出的地震损伤模型能够较好地反映单边螺栓T型钢连接梁柱节点的损伤演化过程与破坏程度,为该类梁柱连接节点的优化设计和安全评估提供了理论依据和实践经验。

加强型翼缘-波纹腹板组合隔板贯通式节点抗震性能研究

为克服隔板贯通式节点易发生脆性断裂而导致结构破坏的不足,结合“加强”和“削弱”的措施,使塑性铰外移,提出了加强型翼缘-波纹腹板组合隔板贯通式梁柱新型节点,并利用有限元软件ABAQUS探究了该新型节点在低周往复荷载作用下的破坏模式、应力分布情况。研究波纹数量、波纹厚度、加强板厚度、加强板长度这4种参数对该新型节点的滞回曲线、骨架曲线、耗能能力的影响规律。结果表明:新型节点有较好的承载力,应力主要集中在梁翼缘上波纹腹板削弱处,破坏发生在远离削弱处一侧,且腹板未发生屈曲变形。随着波纹厚度、加强板长度的增大,新型节点的承载力增加,耗能能力下降;随着波纹数量的增多,新型节点承载力和耗能能力增加;随着加强板厚度的增大,承载力增加,耗能能力先减小后增大。

装配整体式梁柱节点的抗震性能对比研究

目的 研究预制柱纵筋间距放大后装配整体式T型节点和十字型节点的抗震性能,为工程设计提供依据。方法 对5个足尺梁柱节点试件进行低周往复荷载试验,通过对比各试件的滞回曲线、骨架曲线和位移延性等,研究了节点类型、柱纵筋间距和轴压比对梁柱节点抗震性能的影响。结果 装配式节点均发生梁端弯曲破坏,预制柱和节点核心区未见明显破坏,破坏主要是预制梁端底部纵筋屈服和梁端底部混凝土压碎脱落;楼板加强了叠合梁的抗负弯矩能力,叠合梁上部现浇混凝土和预制混凝土交界面出现明显的水平剪切裂缝;柱纵筋间距放大后,与对比试件相比,T型节点的承载力提高了9.2%,十字型节点的承载力提高了1.3%。结论 柱纵筋间距放大试件的延性和耗能能力与对比试件相差不大,柱纵筋间距放大对梁柱节点的抗震性能影响不大;十字型节点和T型节点位移延性系数相差不大。

增设角部阻尼器箍头榫木节点的抗震性能

为了给广府木结构的修复提供理论依据,采用菠萝格木材设计制作了5个箍头榫节点试件。考虑到榫卯构造尺寸的影响,首先进行了未加固无损节点的拟静力试验。然后,采用对原有外观影响较小的雀替型阻尼器对上述节点损坏试件进行加固,以尽可能保留建筑的原始风貌。最后,对加固节点进行拟静力试验,以研究节点的抗震性能变化以及阻尼器的加固效果。结果表明:采用阻尼器加固后的节点试件在加载至破坏时,榫卯处压痕明显,梁外榫外侧劈裂、脱榫现象明显,阻尼器脚部的橡胶与钢板有一定的脱离现象;对节点增设阻尼器能够弥补节点初期损伤导致的受力性能下降,为残损榫卯节点提供较好的后期刚度,提高节点的承载能力和耗能能力;与未加固试件相比,增设阻尼器后,试件的后期刚度、极限承载力、总滞回耗能均有所增加,分别提高18%、19%、20%以上。文中还在已有简化力学模型的基础上,结合OpenSees,提出了一种应用于箍头榫木结构的宏观模型建模方法。采用该方法得到的节点滞回曲线与试验结果吻合良好,可以有效模拟阻尼器加固的箍头榫木节点的滞回耗能特性。

复杂断块油藏井震联合建模数模一体化技术研究

【目的】为解决复杂断块油藏面临的油藏构造碎小、低序级断层数量多、准确识别难度大和油藏描述效率低等问题。【方法】充分应用地震资料、测井数据等储层信息,开展井震联合建模数模一体化技术研究,利用三维地震资料,结合现场生产动态响应情况开展断层精细解释、断裂系统精细刻画,准确落实低序级断层发育及组合方式,在精细地层对比研究的基础上,建立三维地质模型,利用数值模拟与模型互检,迭代修正更新模型,尽可能保证模型精准,以便厘清剩余油分布规律,指导后期开发。【结果】该技术在胜利油田复杂断块区D块、L块等多个区块先后进行了应用,结果显示,断点吻合率均达到100%,数模含水拟合率达到90%以上。【结论】该技术能够实现复杂断块构造的精细描述,对特高含水期自然断块剩余油潜力认识、提高老区采收率具有重要意义,对其他同类型油藏的剩余油挖潜具有指导意义和良好的推广价值。

黄土场地条件下地铁车站诱导缝三维地震响应研究

自20世纪90年代地铁车站结构诱导缝概念提出以来,诱导缝已在我国大、中等城市地铁车站中得到广泛应用,但其抗震性能尚未得到验证。以西安黄土地区地铁车站工程建设为研究背景,基于ABAQUS非线性有限元软件平台,建立黄土场地与地铁车站结构动力相互作用三维数值模型,通过大型地震模拟振动台试验与数值模拟的对比研究,验证了数值模型及分析方法的可靠性。基于上述数值分析方法,进一步建立原型结构数值计算模型,研究不同频谱特性及不同峰值加速度地震波作用下黄土场地中地铁车站诱导缝的地震响应规律。研究结果表明:诱导缝断面处结构更易发生较大水平相对位移而产生破坏,为地铁车站结构的薄弱面,且其两侧结构水平相对滑动沿地铁车站结构从下往上逐渐增大;诱导缝两侧结构竖向相对错动沿地铁车站截面宽度方向呈现出两端较大、中间相对较小的规律;在低频成分丰富的西安人工波作用下,诱导缝处余留纵向钢筋塑性变形发展贯穿整个地震作用过程,塑性应变累积效果更显著。研究结果初步揭示了设诱导缝地铁车站的地震响应特征及规律,对进一步探索设诱导缝地铁车站在地震作用下的结构损伤、破坏发展的内在动力与作用机制有一定参考价值,可为黄土地区地铁地下结构诱导缝的抗震设计提供参考。

一种新型结构与保温一体化复合墙板节点试验

为解决复合墙板节点常见的保温板易燃、易脱落等棘手问题,并使其抗震性能良好。给出了一种新型的结构与保温一体化陶粒混凝土T型复合墙板节点。该复合墙板节点具有夹芯独特构造优势,主要表现在绿色节能,轻质高强,力学性能好,保温系统连接可靠,还能杜绝火灾的发生。通过对T型复合墙板节点进行抗震试验,分别研究了其滞回性能、破坏机理、承载及变形能力、延性、耗能、损伤等。结果表明:一体化复合墙板节点的破坏顺序为腹板-翼缘-节点核心区;薄弱位置主要发生在腹板脚部,混凝土被拉裂或压碎,钢筋被拉长或压弯等;节点核心区受力相对良好,安全储备充足;符合“强节点,弱构件”设计要求和墙板革新发展政策。延性系数大于3,墙板节点安全性能良好。通过损伤指标评估分析,了解了试件各阶段工作状态。

套筒灌浆连接预制混凝土框架柱接头斜截面抗剪性能试验研究

套筒灌浆连接是预制混凝土框架结构中应用较广泛的连接方式。开展了6个套筒灌浆连接预制混凝土柱接头的抗剪试验,主要研究了轴压比(0,0.2,0.4,0.6)、混凝土强度等级(C30,C40,C50)对柱接头斜截面抗剪性能影响。研究表明:所有试件接头均发生斜截面剪切破坏,且斜截面破坏发生时接缝界面保持完好;柱接头抗剪承载力随着混凝土强度、轴压比的提高而增大;在轴压比0.4下,与C40试件相比,C30试件的抗剪承载力降低14%,C50试件的抗剪承载力提高13%;混凝土强度等级为C40时,轴压比为0,0.2试件的抗剪承载力分别比轴压比为0.4试件降低17%,8%,轴压比为0.6试件的抗剪承载力比轴压比为0.4试件提高7%;预制柱接头的初始刚度随轴压比的增大而增大。最后,基于试验结果,对中国GB 50010—2010《混凝土结构设计规范》(2015年版)、欧洲规范《Eurocode 2:Design of Concrete Structures》中混凝土柱接头斜截面抗剪承载力计算公式进行了评价。

新型带可更换耗能装置预制混凝土梁-柱节点抗震性能分析

该文提出了一种新型的带可更换耗能装置的预制混凝土梁柱节点。该装置主要由上下削弱钢板和开孔削弱H型钢板组成。设计了一个带有可更换耗能装置的试件和一个现浇整体试件,对其开展了梁端循环往复试验研究,探究了该节点的滞回响应、梁纵筋应变、极限承载能力、耗能能力、残余转角和震后可恢复性。试验结果表明,带可更换耗能装置的试件能够将塑性区域从梁柱的核心部分转移到耗能装置上,实现耗能装置耗能;在耗能装置屈服破坏时,梁柱仍为弹性状态;相比于现浇试件其耗能能力高出20%,该装置具有良好的耗能能力和震后可恢复性。