Facies-controlled prediction of dolomite reservoirs in the Middle Permian Qixia Formation in Shuangyushi,northwestern Sichuan Basin

The Middle Permian Qixia Formation in the Shuangyushi area,northwestern Sichuan Basin,develops shoal-facies dolomite reservoirs.To pinpoint promising reservoirs in the Qixia Formation,deep thin shoal-facies dolomite reservoirs were predicted using the techniques of pre-stack Kirchhoff-Q compensation for absorption,inverse Q filtering,low-to high-frequency compensation,forward modeling,and facies-controlled seismic meme inversion.The results are obtained in six aspects.First,the dolomite reservoirs mainly exist in the middle and lower parts of the second member of Qixia Formation(Qi2 Member),which coincide with the zones shoal cores are developed.Second,the forward modeling shows that the trough energy at the top and bottom of shoal core increases with increasing shoal-core thickness,and weak peak reflections are associated in the middle of shoal core.Third,five types of seismic waveform are identified through waveform analysis of seismic facies.Type-Ⅰ and Type-Ⅱ waveforms correspond to promising facies(shoal core microfacies).Fourth,vertically,two packages of thin dolomite reservoirs turn up in the sedimentary cycle of intraplatform shoal in the Qi2 Member,and the lower package is superior to the upper package in dolomite thickness,scale and lateral connectivity.Fifth,in plane,significantly controlled by sedimentary facies,dolomite reservoirs laterally distribute with consistent thickness in shoal cores at topographical highs and extend toward the break.Sixth,the promising prospects are the zones with thick dolomite reservoirs and superimposition of horstegraben structural traps.

Reservoir prediction using pre-stack inverted elastic parameters

This is a case study of the application of pre-stack inverted elastic parameters to tight-sand reservoir prediction. With the development of oil and gas exploration, pre-stack data and inversion results are increasingly used for production objectives. The pre-stack seismic property studies include not only amplitude verse offset （AVO） but also the characteristics of other elastic property changes. In this paper, we analyze the elastic property parameters characteristics of gas- and wet-sands using data from four gas-sand core types. We found that some special elastic property parameters or combinations can be used to identify gas sands from water saturated sand. Thus, we can do reservoir interpretation and description using different elastic property data from the pre-stack seismic inversion processing. The pre- stack inversion method is based on the simplified Aki-Richard linear equation. The initial model can be generated from well log data and seismic and geologic interpreted horizons in the study area. The input seismic data is angle gathers generated from the common reflection gathers used in pre-stack time or depth migration. The inversion results are elastic property parameters or their combinations. We use a field data example to examine which elastic property parameters or combinations of parameters can most easily discriminate gas sands from background geology and which are most sensitive to pore-fluid content. Comparing the inversion results to well data, we found that it is useful to predict gas reservoirs using λ, λρ, λ/μ, and K/μ properties, which indicate the gas characteristics in the study reservoir.

Pre-stack inversion for caved carbonate reservoir prediction:A case study from Tarim Basin,China

The major storage space types in the carbonate reservoir in the Ordovician in the TZ45 area are secondary dissolution caves.For the prediction of caved carbonate reservoir,post-stack methods are commonly used in the oilfield at present since pre-stack inversion is always limited by poor seismic data quality and insufficient logging data.In this paper,based on amplitude preserved seismic data processing and rock-physics analysis,pre-stack inversion is employed to predict the caved carbonate reservoir in TZ45 area by seriously controlling the quality of inversion procedures.These procedures mainly include angle-gather conversion,partial stack,wavelet estimation,low-frequency model building and inversion residual analysis.The amplitude-preserved data processing method can achieve high quality data based on the principle that they are very consistent with the synthetics.Besides,the foundation of pre-stack inversion and reservoir prediction criterion can be established by the connection between reservoir property and seismic reflection through rock-physics analysis.Finally,the inversion result is consistent with drilling wells in most cases.It is concluded that integrated with amplitude-preserved processing and rock-physics,pre-stack inversion can be effectively applied in the caved carbonate reservoir prediction.

Seismic attributes optimization and application in reservoir prediction

Petroleum geophysicists recognize that many parameters related to oil and gas reservoirs are predicted using seismic attribute data. However, how best to optimize the seismic attributes, predict the character of thin sandstone reservoirs, and enhance the reservoir description accuracy is an important goal for geologists and geophysicists. Based on the theory of main component analysis, we present a new optimization method, called constrained main component analysis. Modeling estimates and real application in an oilfield show that it can enhance reservoir prediction accuracy and has better applicability.

Reservoir prediction using multi-wave seismic attributes

The main problems in seismic attribute technology are the redundancy of data and the uncertainty of attributes, and these problems become much more serious in multi-wave seismic exploration. Data redundancy will increase the burden on interpreters, occupy large computer memory, take much more computing time, conceal the effective information, and especially cause the ＂curse of dimension＂. Uncertainty of attributes will reduce the accuracy of rebuilding the relationship between attributes and geological significance. In order to solve these problems, we study methods of principal component analysis （PCA）, independent component analysis （ICA） for attribute optimization and support vector machine （SVM） for reservoir prediction. We propose a flow chart of multi-wave seismic attribute process and further apply it to multi-wave seismic reservoir prediction. The processing results of real seismic data demonstrate that reservoir prediction based on combination of PP- and PS-wave attributes, compared with that based on traditional PP-wave attributes, can improve the prediction accuracy.

Prediction of maximum magnitude and original time of reservoir induced seismicity

This paper deals with the prediction of potentially maximum magnitude and origin time for reservoir induced seismicity (RIS). The factor and sign of seismology and geology of RIS has been studied, and the information quantity for magnitude of induced seismicity provided by them has been calculated. In terms of information quan-tity the biggest possible magnitude of RIS is determined. The changes of seismic frequency with time are studied using grey model method, and the time of the biggest change rate is taken as original time of the main shock. The feasibility of methods for predicting magnitude and time has been tested for the reservoir induced seismicity in the Xinfengjiang reservoir, China and the Koyna reservoir, India.

Quantitative prediction of oil saturation of unconsolidated sandstone reservoir based on time-lapse seismic “relative difference method”: Taking Zeta oil field in West Africa as an example

In view of the disadvantage that the absolute difference of time-lapse seismic(the difference between monitoring data and base data) is not only related to the change of oil saturation, but also closely related to the thickness of reservoir, a time-lapse seismic "relative difference method"(the ratio of monitoring data to base data) not affected by the thickness of reservoir but only related to the change of fluid saturation, is proposed through seismic forward modeling after fluid displacement simulation. Given the same change of fluid saturation, the absolute difference of time-lapse seismic conforms to the law of "tuning effect" and seismic reflection of "thin bed", and the remaining oil prediction method based on absolute difference of time-lapse seismic is only applicable to the reservoirs with uniform thickness smaller than the tuning thickness or with thickness greater than the tuning thickness. The relative difference of time-lapse seismic is not affected by reservoir thickness, but only related to the change of fluid saturation. It is applicable to all the deep-sea unconsolidated sandstone reservoirs which can exclude the effect of pressure, temperature, pore type and porosity on seismic. Therefore, the relation between the relative difference of time-lapse seismic and the change of fluid saturation, which is obtained from seismic forward modeling after Gassmann fluid displacement simulation, can be used to quantitatively predict the change of reservoir water saturation and then the distribution of the remaining oil. The application of this method in deep sea Zeta oil field in west Africa shows that it is reasonable and effective.

Application of Prediction Techniques in Carbonate Karst Reservoir in Tarim Basin

Carbonate karst reservoir is the emphases of Tarim＇s carbonate exploration. However, it is buried at a large depth, which results in Weak seismic reflection signal and low S/N ratio. In addition, the karst reservoir contains great heterogeneity, so reservoir prediction is very difficult. Through many years of research and exploration, we have established a suite of comprehensive evaluation technology for carbonate karst reservoir using geophysical characteristics and a geological concept model, including a technique for reconstructing the paleogeomorphology of buried hills based on a sequence framework, seismic description of the karst reservoir, and strain variant analysis for fracture estimation. The evaluation technology has been successfully applied in the Tabei and Tazhong areas, and commercial production of oil and gas has been achieved. We show the application of this technology in the Lunguxi area in North Tarim in this paper.

Pre-stack-texture-based reservoir characteristics and seismic facies analysis

Seismic texture attributes are closely related to seismic facies and reservoir characteristics and are thus widely used in seismic data interpretation.However,information is mislaid in the stacking process when traditional texture attributes are extracted from poststack data,which is detrimental to complex reservoir description.In this study,pre-stack texture attributes are introduced,these attributes can not only capable of precisely depicting the lateral continuity of waveforms between different reflection points but also reflect amplitude versus offset,anisotropy,and heterogeneity in the medium.Due to its strong ability to represent stratigraphies,a pre-stack-data-based seismic facies analysis method is proposed using the selforganizing map algorithm.This method is tested on wide azimuth seismic data from China,and the advantages of pre-stack texture attributes in the description of stratum lateral changes are verified,in addition to the method＇s ability to reveal anisotropy and heterogeneity characteristics.The pre-stack texture classification results effectively distinguish different seismic reflection patterns,thereby providing reliable evidence for use in seismic facies analysis.

Predicting the distribution of thin bed reservoirs by broad frequency band seismic

Recognition of thin interbedded reservoirs in the middle-shallow strata in the Songliao Basin is a great difficulty. In order to resolve this problem, we present a technique for predicting the distribution of thin reservoirs using a broad frequency band and ultra high resolution seismic. Based on forward modeling, we recognized that a thin bed seismic reflection is characterized by changing amplitude with changing frequency （amplitude versus frequency, AVF）. We calculate the thickness of thin reservoirs from their AVF characteristics and predict the distribution of thin bed reservoir using broad frequency band and ultra high resolution seismic. The technique has been applied in the 3D seismic area of Zhaoyuan in the northern part of the Songliao Basin. The seismic resolution is increased by two or three times over that of conventional seismic and many thin reservoirs have been identified. The technique has extensive application to the exploration and development of oil and gas, such as optimizing the location of exploration wells, the design of wells （especially horizontal wells）, choice of production test layers, analyzing reservoir continuity in development wells, and so on.

Mesozoic Reservoir Predictionin the Longdong Loess Plateau

This paper summarizes a set of interpretation technologies for Mesozoic sandstone reservoir prediction in the Longdong loess plateau, such as seismic sequence processing and interpretation based on generalized S transform, the eroded paleo-geomorphology interpretation of the top of the Triassic and a variety of lateral reservoir predictions. The effects of employing these technologies are compared and analyzed, as well. The research results show that seismic sequence processing interpretation technology based on generalized S transform can distinguish 3ms (about the thickness of 6 m)sequence interface. Consequently the technology can ascertain the distribution of a sand body of the formation Ch 8 and expand the exploration area of the Xifeng oil field in the Longdong area.

Sweet spot prediction in tight sandstone reservoir based on well-bore rock physical simulation

To establish the relationship among reservoir characteristics and rock physical parameters,we construct the well-bore rock physical models firstly,considering the influence factors,such as mineral composition,shale content,porosity,fluid type and saturation.Then with analyzing the change rules of elastic parameters along with the above influence factors and the cross-plots among elastic parameters,the sensitive elastic parameters of tight sandstone reservoir are determined,and the rock physics template of sweet spot is constructed to guide pre-stack seismic inversion.The results show that velocity ratio and Poisson impedance are the most sensitive elastic parameters to indicate the lithologic and gas-bearing properties of sweet spot in tight sandstone reservoir.The high-quality sweet spot is characterized by the lower velocity ratio and Poisson impedance.Finally,the actual seismic data are selected to predict the sweet spots in tight sandstone gas reservoirs,so as to verify the validity of the rock physical simulation results.The significant consistency between the relative logging curves and inversion results in different wells implies that the utilization of well-bore rock physical simulation can guide the prediction of sweet spot in tight sandstone gas reservoirs.

Prediction of Subtle Thin Gas Reservoir in the Loess Desert Area in the North of Ordos Basin

For thin gas reservoir of low-porosity and low-permeability in the loess desert area, a suite of lateral reservoir prediction techniques has been developed by Changqing Oil Company and the excellent effects achieved in exploration and exploitation in the areas such as Yulin, Wushenqi,Suligemiao, Shenmu etc., so that the Upper Paleozoic gas reserve has been stably increasing for eight years in Changqing Oilfield. The paper analyzed the effects and experience of the application of these techniques in detail.

Predicting gas-bearing distribution using DNN based on multi-component seismic data: Quality evaluation using structural and fracture factors

The tight-fractured gas reservoir of the Upper Triassic Xujiahe Formation in the Western Sichuan Depression has low porosity and permeability. This study presents a DNN-based method for identifying gas-bearing strata in tight sandstone. First, multi-component composite seismic attributes are obtained.The strong nonlinear relationships between multi-component composite attributes and gas-bearing reservoirs can be constrained through a DNN. Therefore, we identify and predict the gas-bearing strata using a DNN. Then, sample data are fed into the DNN for training and testing. After optimized network parameters are determined by the performance curves and empirical formulas, the best deep learning gas-bearing prediction model is determined. The composite seismic attributes can then be fed into the model to extrapolate the hydrocarbon-bearing characteristics from known drilling areas to the entire region for predicting the gas reservoir distribution. Finally, we assess the proposed method in terms of the structure and fracture characteristics and predict favorable exploration areas for identifying gas reservoirs.

Geological Model of Pre-Jurassic Heterogeneous Basement and Hydrocarbon Productivity Prediction of “Oil-and-Gas Bearing Contact Zone Horizon” Between Paleozoic and Mesozoic Deposits of Ostaninskoye and Severoostaninskoye Oil-and-Gas Fields(Western Siberi

This work is devoted to the analysis of the formation conditions and geologic model of Paleozoic basement rocks of a number of oil-and-gas fields, located in Tomsk region(South of West-Siberian Oil-and-Gas Province,Russia).The research is based on integrated data interpretation of seismic exploration, well logging and deep drilling.The study is at the interfaces between exploration geophysics

Petrophysical parameters inversion for heavy oil reservoir based on a laboratory-calibrated frequency-variant rock-physics model

Heavy oil has high density and viscosity, and exhibits viscoelasticity. Gassmann's theory is not suitable for materials saturated with viscoelastic fluids. Directly applying such model leads to unreliable results for seismic inversion of heavy oil reservoir. To describe the viscoelastic behavior of heavy oil, we modeled the elastic properties of heavy oil with varying viscosity and frequency using the Cole-Cole-Maxwell (CCM) model. Then, we used a CCoherent Potential Approximation (CPA) instead of the Gassmann equations to account for the fluid effect, by extending the single-phase fluid condition to two-phase fluid (heavy oil and water) condition, so that partial saturation of heavy oil can be considered. This rock physics model establishes the relationship between the elastic modulus of reservoir rock and viscosity, frequency and saturation. The viscosity of the heavy oil and the elastic moduli and porosity of typical reservoir rock samples were measured in laboratory, which were used for calibration of the rock physics model. The well-calibrated frequency-variant CPA model was applied to the prediction of the P- and S-wave velocities in the seismic frequency range (1–100 Hz) and the inversion of petrophysical parameters for a heavy oil reservoir. The pre-stack inversion results of elastic parameters are improved compared with those results using the CPA model in the sonic logging frequency (∼10 kHz), or conventional rock physics model such as the Xu-Payne model. In addition, the inversion of the porosity of the reservoir was conducted with the simulated annealing method, and the result fits reasonably well with the logging curve and depicts the location of the heavy oil reservoir on the time slice. The application of the laboratory-calibrated CPA model provides better results with the velocity dispersion correction, suggesting the important role of accurate frequency dependent rock physics models in the seismic prediction of heavy oil reservoirs.

Predicting Terrestrial Flagstone Reservoirs in the Sha-I Member of the Qibei Depression in the Dagang Oilfield

There are few 3-D seismic profiles and drillings in the middle part of the Qibei depression in the Dagang oilfield, and more than 70% of the 2-D seismic profiles were completed before the 1980s. Meanwhile, changes in the terrestrial formations in this region have been large and complex. These factors have made it difficult to predict reservoirs in this area. The purpose of this paper is to establish a methodology for predicting potential gas and oil reservoirs. Our research combines sequence stratigraphy, well-logs, and seismic analysis to elucidate the prediction of flagstone reservoirs in the S1 (Sha-I) Member in the middle of the Qibei depression. Previous research indicates that these rocks were deposited in an environment that had a semiarid, northern subtropical, and warm, humid climate. The objective strata currently consist mainly of lake fades, deeper lake facies, and shore-shallow lake facies. The study reveals that the lower section of the S1 Member is an important objective region for exploration.

A permeability prediction method based on pore structure and lithofacies

Permeability prediction using linear regression of porosity always has poor performance when the reservoir with complex pore structure and large variation of lithofacies.A new method is proposed to predict permeability by comprehensively considering pore structure,porosity and lithofacies.In this method,firstly,the lithofacies classification is carried out using the elastic parameters,porosity and shear frame flexibility factor.Then,for each lithofacies,the elastic parameters,porosity and shear frame flexibility factor are used to obtain permeability from regression.The permeability prediction test by logging data of the study area shows that the shear frame flexibility factor that characterizes the pore structure is more sensitive to permeability than the conventional elastic parameters,so it can predict permeability more accurately.In addition,the permeability prediction is depending on the precision of lithofacies classification,reliable lithofacies classification is the precondition of permeability prediction.The field data application verifies that the proposed permeability prediction method based on pore structure parameters and lithofacies is accurate and effective.This approach provides an effective tool for permeability prediction.

中国石化油藏地球物理二十年发展与思考

油藏地球物理技术是综合应用多种地球物理资料与油藏动静态信息进行复杂油藏精细表征和动态监测的跨学科技术,对于提高油藏的储量动用程度和提高采收率具有重要的意义,是当前地球物理技术的重要发展方向。系统回顾了中国石化油藏地球物理提出的背景和过去二十年的发展历程,梳理了油藏地球物理技术系列,总结了在油藏地球物理基础研究、井中地球物理技术、多尺度资料联合反演、地球物理约束确定性建模、时移地震剩余油气预测、地震地质工程一体化、微地震油藏监测等方面的技术创新和应用效果。面对中国油气田勘探开发的深层、深水、非常规及老油田(“两深一非一老”)形势和一体化、智能化、绿色化挑战,油藏地球物理在油气产业技术致胜阶段仍然大有可为,要持续创新油藏地球物理技术,井、震、动、模一体化联合和人工智能应用,构建高水平的油藏地球物理勘探开发一体化、地质工程一体化解决方案,支撑油藏全生命周期建设。