Weighted-elastic-wave interferometric imaging of microseismic source location

Knowledge of the locations of seismic sources is critical for microseismic monitoring. Time-window-based elastic wave interferometric imaging and weighted- elastic-wave （WEW） interferometric imaging are proposed and used to locate modeled microseismic sources. The proposed method improves the precision and eliminates artifacts in location profiles. Numerical experiments based on a horizontally layered isotropic medium have shown that the method offers the following advantages： It can deal with Iow-SNR microseismic data with velocity perturbations as well as relatively sparse receivers and still maintain relatively high precision despite the errors in the velocity model. Furthermore, it is more efficient than conventional traveltime inversion methods because interferometric imaging does not require traveltime picking. Numerical results using a 2D fault model have also suggested that the weighted-elastic-wave interferometric imaging can locate multiple sources with higher location precision than the time-reverse imaging method.

Microseismic source location using the Log-Cosh function and distant sensor-removed P-wave arrival data

Source location is the core foundation of microseismic monitoring.To date,commonly used location methods have usually been based on the ray-tracing travel-time technique,which generally adopts an L1 or L2 norm to establish the location objective function.However,the L1 norm usually achieves low location accuracy,whereas the L2 norm is easily affected by large P-wave arrival-time picking errors.In addition,traditional location methods may be affected by the initial iteration point used to find a local optimum location.Furthermore,the P-wave arrival-time data that have travelled long distances are usually poor in quality.To address these problems,this paper presents a microseismic source location method using the Log-Cosh function and distant sensor-removed P-wave arrival data.Its basic principles are as follows:First,the source location objective function is established using the Log-Cosh function.This function has the stability of the L1 norm and location accuracy of the L2 norm.Then,multiple initial points are generated randomly in the mining area,and the established Log-Cosh location objective function is used to obtain multiple corresponding location results.The average value of the 50 location points with the largest data field potential values is treated as the initial location result.Next,the P-wave travel times from the initial location result to triggered sensors are calculated,and then the P-wave arrival data with travel times exceeding 0.2 s are removed.Finally,the aforementioned location steps are repeated with the denoised P-wave arrival dataset to obtain a high-precision location result.Two synthetic events and eight blasting events from the Yongshaba mine,China,were used to test the proposed method.Regardless of whether the P-wave arrival data with long travel times were eliminated,the location error of the proposed method was smaller than that of the L1/L2 norm and trigger-time-based location method(TT1/TT2 method).Furthermore,after eliminating the Pwave arrival data with long travel distances,the location accuracy of these three location methods increased,indicating that the proposed location method has good application prospects.