Recent developments in selective laser processes for wearable devices

Recently,the increasing interest in wearable technology for personal healthcare and smart virtual/augmented reality applications has led to the development of facile fabrication methods.Lasers have long been used to develop original solutions to such challenging technological problems due to their remote,sterile,rapid,and site-selective processing of materials.In this review,recent developments in relevant laser processes are summarized under two separate categories.First,transformative approaches,such as for laser-induced graphene,are introduced.In addition to design optimization and the alteration of a native substrate,the latest advances under a transformative approach now enable more complex material compositions and multilayer device configurations through the simultaneous transformation of heterogeneous precursors,or the sequential addition of functional layers coupled with other electronic elements.In addition,the more conventional laser techniques,such as ablation,sintering,and synthesis,can still be used to enhance the functionality of an entire system through the expansion of applicable materials and the adoption of new mechanisms.Later,various wearable device components developed through the corresponding laser processes are discussed,with an emphasis on chemical/physical sensors and energy devices.In addition,special attention is given to applications that use multiple laser sources or processes,which lay the foundation for the all-laser fabrication of wearable devices.

The suitability assessment on site selection for bottom seeding scallop culture based on analytic hierarchy process

Scallop culture is an important way of bottom-seeding marine ranching,which is of great significance to improve the current situation of fishery resources.However,there are some problems in site-selection evaluation of marine ranching,such as imperfect criteria system,complex structure,untargeted criteria quantification,etc.In addition,no site-selection evaluation method of bottom-seeding culture areas for scallops is available.Therefore,we established a hierarchy structure model according to the analytic hierarchy process(AHP)theory,in which social,physical,chemical,and biological environments are used as main criteria,and marine functional zonation,water depth,current,water temperature,salinity,substrate type,water quality,sediment quality,red tide,phytoplankton,and zooplankton are used as sub-criteria,on which a multi-parameter evaluation system is set up.Meanwhile,the dualism method,assignment method,and membership function method were used to quantify sub-criteria,and a quantitative evaluation for the entire criteria was added,including the evaluation and analysis of two types of unsuitable environmental situations.By overall consideration in scallop yield,quality,and marine ranching construction objectives,the weight of the main criteria could be determined.Five grades in the suitability corresponding to the evaluation result were divided,and the Python language was used to create an evaluation system for efficient calculation and intuitive presentation of the evaluation outcome.Eight marine cases were simulated based on existing survey data,and the results prove that the method is feasible for evaluating and analyzing the site selection of bottom-seeding culture areas for scallops under various environmental situations.The proposed evaluation method can be promoted for the site selection of bottom-seeding marine ranching.This study provided theoretical and methodological references for the site selection evaluation of other types of marine ranching.

Effects of processing parameters on fabrication defects,microstructure and mechanical properties of additive manufactured Mg–Nd–Zn–Zr alloy by selective laser melting process

Mg–3Nd–0.2Zn–0.4Zr(NZ30K,wt.%)alloy is a new kind of high-performance metallic biomaterial.The combination of the NZ30K Magnesium(Mg)alloy and selective laser melting(SLM)process seems to be an ideal solution to produce porous Mg degradable implants.However,the microstructure evolution and mechanical properties of the SLMed NZ30K Mg alloy were not yet studied systematically.Therefore,the fabrication defects,microstructure,and mechanical properties of the SLMed NZ30K alloy under different processing parameters were investigated.The results show that there are two types of fabrication defects in the SLMed NZ30K alloy,gas pores and unfused defects.With the increase of the laser energy density,the porosity sharply decreases to the minimum first and then slightly increases.The minimum porosity is 0.49±0.18%.While the microstructure varies from the large grains with lamellar structure inside under low laser energy density,to the large grains with lamellar structure inside&the equiaxed grains&the columnar grains under middle laser energy density,and further to the fine equiaxed grains&the columnar grains under high laser energy density.The lamellar structure in the large grain is a newly observed microstructure for the NZ30K Mg alloy.Higher laser energy density leads to finer grains,which enhance all the yield strength(YS),ultimate tensile strength(UTS)and elongation,and the best comprehensive mechanical properties obtained are YS of 266±2.1 MPa,UTS of 296±5.2 MPa,with an elongation of 4.9±0.68%.The SLMed NZ30K Mg alloy with a bimodal-grained structure consisting of fine equiaxed grains and coarser columnar grains has better elongation and a yield drop phenomenon.

A preliminary site selection system for underground hydrogen storage in salt caverns and its application in Pingdingshan,China

Large‐scale underground hydrogen storage(UHS)provides a promising method for increasing the role of hydrogen in the process of carbon neutrality and energy transition.Of all the existing storage deposits,salt caverns are recognized as ideal sites for pure hydrogen storage.Evaluation and optimization of site selection for hydrogen storage facilities in salt caverns have become significant issues.In this article,the software CiteSpace is used to analyze and filter hot topics in published research.Based on a detailed classification and analysis,a“four‐factor”model for the site selection of salt cavern hydrogen storage is proposed,encompassing the dynamic demands of hydrogen energy,geological,hydrological,and ground factors of salt mines.Subsequently,20 basic indicators for comprehensive suitability grading of the target site were screened using the analytic hierarchy process and expert survey methods were adopted,which provided a preliminary site selection system for salt cavern hydrogen storage.Ultimately,the developed system was applied for the evaluation of salt cavern hydrogen storage sites in the salt mines of Pingdingshan City,Henan Province,thereby confirming its rationality and effectiveness.This research provides a feasible method and theoretical basis for the site selection of UHS in salt caverns in China.

Variable selection-based SPC procedures for high-dimensional multistage processes

Monitoring high-dimensional multistage processes becomes crucial to ensure the quality of the final product in modern industry environments. Few statistical process monitoring(SPC) approaches for monitoring and controlling quality in highdimensional multistage processes are studied. We propose a deviance residual-based multivariate exponentially weighted moving average(MEWMA) control chart with a variable selection procedure. We demonstrate that it outperforms the existing multivariate SPC charts in terms of out-of-control average run length(ARL) for the detection of process mean shift.

Manufacturing Process Selection of “Green” Oil Palm Natural Fiber Reinforced Polyurethane Composites Using Hybrid TEA Criteria Requirement and AHP Method for Automotive Crash Box

In this study,the best manufacturing process will be selected to build an automotive crash box using green oil palm natural fibre-reinforced polyurethane composite materials.This paper introduces an approach consist of technical aspects(T),the economic point of view(E)and availability(A),and it’s also called as TEA requirement.This approach was developed with the goal of assisting the design engineer in the selection of the best manufacturing process during the design phase at the criteria selection stage.In this study,the TEA requirement will integrate with the analytical hierarchy process(AHP)to assist decision makers or manufacturing engineers in determining the most appropriate manufacturing process to be employed in the manufacture of a composite automotive crash box(ACB)at the early stage of the product development process.It is obvious that a major challenge in the manufacturing selection process is lack of information regarding manufacturing of ACB using natural fibre composite(NFC).There have been no previous studies that examined ranking manufacturability processes in terms of their suitability.Therefore,the TEA-AHP hybrid method was introduced to provide unprejudiced criteria-ranking selection prior to evaluation of pairwise comparisons.At the end of this study,the pulforming process was selected as the best manufacturing process for fabrication of the ACB structural component.

N₂O Formation in Selective Non-catalytic NO_xReduction Processes

Nitrous oxide is not an environmentally regulated species in the U.S., but it does participate in the stratospheric ozone chemistry and contributes to the greenhouse effect. Nitrous oxide has been found to be a by-product of the selective non-catalytic reduction process. Chemical kinetic calculations demonstrated that the formation of nitrous oxide in the urea-based selective non-catalytic reduction process is linked to the conversion of NO by cyano species released from the process parent compounds. This conversion occurs within in temperature window between 850 and 1050℃. With urea injection, nitrous oxide emissions represent up to 20 percent conversion of the NOx reduced. The amount of nitrous oxide formed depends primarily on the process temperature, the amount of chemical injected, the initial NOx level, and the carbon monoxide level in the gas stream. These observations, which were based on the chemical kinetics of the process, should be considered in designing selective non-catalytic reduction systems to minimize nitrous oxide by- product formation.

Application of analytical hierarchy process to selection of primary crusher

Selection of crusher required a great deal of design based on the mining plan and operation input.Selection of the best primary crusher from all of available primary crushers is a Multi-Criterion Decision Making(MCDM) problem. In this paper, the Analytical Hierarchy Process(AHP) method was used to selection of the best primary crusher for Golegohar Iron Mine in Iran. For this reason, gyratory, double toggle jaw, single toggle jaw, high speed roll crusher, low speed sizer, impactor, hammer mill and feeder breaker crushers were considered as alternatives and capacity, feed size, product size, rock compressive strength, abrasion index and mobility of crusher were considered as criteria. As a result of our study, the gyratory crusher was offered as the best primary crusher for the studied mine.

Equipment selection knowledge base system for industrial styrene process

Equipment selection for industrial process usually requires the extensive participation of industrial experts and technologists, which causes a serious waste of resources. This work presents an equipment selection knowledge base system for industrial styrene process(S-ESKBS) based on the ontology technology. This structure includes a low-level knowledge base and a top-level interactive application. As the core part of the S-ESKBS, the low-level knowledge base consists of the equipment selection ontology library, equipment selection rule set and Pellet inference engine. The top-level interactive application is implemented using S-ESKBS, including the parsing storage layer, inference query layer and client application layer. Case studies for the industrial styrene process equipment selection of an analytical column and an alkylation reactor are demonstrated to show the characteristics and implementability of the S-ESKBS.

Coating processes towards selective laser sintering of energetic material composites

This research aims to contribute to the safe methodology for additive manufacturing(AM)of energetic materials.Coating formulation processes were investigated and evaluated to find a suitable method that may enable selective laser sintering(SLS)as the safe method for fabrication of high explosive(HE)compositions.For safety and co nvenie nce reasons,the co ncept demonstration was conducted using inert explosive simulants with properties quasi-similar to the real HE.Coating processes for simulant RDXbased microparticles by means of PCL and 3,4,5-trimethoxybenzaldehyde(as TNT simulant)are reported.These processes were evaluated for uniformity of coating the HE inert simulant particles with binder materials to facilitate the SLS as the adequate binding and fabrication method.Suspension system and single emulsion methods gave required particle near spherical morphology,size and uniform coating.The suspension process appears to be suitable for the SLS of HE mocks and potential formulation methods for active HE composites.The density is estimated to be comparable with the current HE compositions and plastic bonded explosives(PBXs)such as C4 and PE4,produced from traditional methods.The formulation method developed and understanding of the science behind the processes paves the way toward safe SLS of the active HE compositions and may open avenues for further research and development of munitions of the future.

Concurrent Material Selection of Natural Fibre Filament for Fused Deposition Modeling Using Integration of Analytic Hierarchy Process/Analytic Network Process

The employment of natural fibres in fused deposition modeling has raised much attention from researchers in finding a suitable formulation for the natural fibre composite filaments.Moreover,selection of suitable natural fibres for fused deposition modeling should be performed before the development of the composites.It could not be performed without identifying selection criteria that comprehend both materials and fused deposition modeling process requirements.Therefore,in this study,integration of the Analytic Hierarchy Process(AHP)/Analytic Network Process(ANP)has been introduced in selecting the natural fibres based in different clusters of selection concurrently.The selection process has been performed based on the interdependency among the selection criteria.Pairwise comparison matrices are constructed based on AHP’s hierarchical model and super matrices are constructed based on the ANP’s network model.As a result,flax fibre has ranked at the top of the selection by scored 19.5%from the overall evaluation.Flax fibre has excellent material properties and been found in various natural fibre composite applications.Further investigation is needed to study the compatibility of this fibre to be reinforced with a thermoplastic polymer matrix to develop a resultant natural fibre composite filament for fused deposition modeling.

A Selection Process as a Game

The aim of this paper is to exemplify how to solve the problem of selecting a candidate up to his/her acceptance trough game theory.The originality this paper proposes is how this problem will be approached:It will be treated as a single game which is made up of two parts,going as far as to state that the payoffs in the first part of the game will be the mediators of the second part of the game.

Using Extension Theory and Fuzzy Analytic Hierarchy Process on Heterogeneous Wireless Network Selection Algorithm

In order to solve the problem that determining decision factors weights is of subjectivity in heterogeneous wireless network selection algorithm, a network selection algorithm based on extension theory and fuzzy analytic hierarchy process (FAHP) is proposed in this paper. In addition, user and operator codetermine the optimal network using the proposed algorithm, which can give consideration to user and operator benefits. The fuzzy judgment matrix is constructed by membership degree of decision factors which is calculated according to extension theory. The comprehensive weight of each decision factor is obtained using FAHP. Finally, the optimal network is selected through total property value ranking of each candidate network under user preference and operator preference. The simulation results show that the proposed algorithm can select the optimal network efficiently and accurately, satisfy user preference, and implement load balance between networks.

Stock-Selection Strategies Optimization of Fund Management Companies by Analytic Hierarchy Process

Securities investment fund is one of the most important institutional investors in the securities market. The quality of the management of the securities investment fund by the fund management company not only directly affects its survival and development,but also plays a decisive role in the stable operation of securities market and even the macroeconomy. As China is in rapid development of funds,scientific and effective investment strategies will be the only road for the long-term development of wellestablished fund management companies. We attempt to combine the value investment strategies with quantitative investment strategies to build a system of optimized investment strategies with the use of analytic hierarchy process so as to improve business performance of fund management companies and to foster the concept of value investment. Moreover,it possesses certain significance in enriching investment strategies for securities investment fund and promoting the healthy growth of the Chinese securities investment fund.

A Hybrid MCDM Approach Based on ANP and TOPSIS for Facility Layout Selection

Facility layout selection is a multi-criteria decision making (MCDM) problem,since it has a strategic impact on the efficiency of manufacturing system.In view of the interdependency among selection criteria,analytic network process (ANP) is proposed to analyze the structure of the facility layout selection problem and determine the weights for each criterion.A network structure is constructed that shows all elements and clusters and their interactions.Limit priorities are also calculated which help decision maker evaluate the relative importance among criterion in the alternative selection process.Moreover,a hybrid MCDM approach that employs ANP and technique for order preference by similarity to an ideal solution (TOPSIS)method to rank the optimal facility layout alternatives.Finally,an application of a new aeronautic component assembly workshop facility layout selection is conducted.To further illustrate the advantage of the proposed approach,the difference between ANP-TOPSIS and AHP-TOPSIS methods are compared and discussed.Results have demonstrated the effectiveness and feasibility of the proposed method.

MULTIPLE ATTRIBUTE NETWORK SELECTION ALGORITHM BASED ON AHP AND SYNERGETIC THEORY FOR HETEROGENEOUS WIRELESS NETWORKS

It is a hot issue in communication research field to select the best network for Heterogeneous Wireless Networks(HWNs),and it is also a difficult problem to reduce the handoff number of vertical handoff.In order to solve this problem,the paper proposes a multiple attribute network selection algorithm based on Analytic Hierarchy Process(AHP)and synergetic theory.The algorithm applies synergetics to network selection,considering the candidate network as a compound system composed of multiple attribute subsystems,and combines the subsystem order degree with AHP weight to obtain entropy of the compound system,which is opposite the synergy degree of a network system.The greater the synergy degree,the better the network performance.The algorithm takes not only the coordination of objective attributes but also Quality of Service(QoS)requirements into consideration,ensuring that users select the network with overall good performance.The simulation results show that the proposed algorithm can effectively reduce the handoff number and provide uses with satisfactory QoS according to different services.

Path Selection in Disaster Response Management Based on Q-learning

Suitable rescue path selection is very important to rescue lives and reduce the loss of disasters, and has been a key issue in the field of disaster response management. In this paper, we present a path selection algorithm based on Q-learning for disaster response applications. We assume that a rescue team is an agent, which is operating in a dynamic and dangerous environment and needs to find a safe and short path in the least time. We first propose a path selection model for disaster response management, and deduce that path selection based on our model is a Markov decision process. Then, we introduce Q-learning and design strategies for action selection and to avoid cyclic path. Finally, experimental results show that our algorithm can find a safe and short path in the dynamic and dangerous environment, which can provide a specific and significant reference for practical management in disaster response applications.

Influence of process parameters and aging treatment on the microstructure and mechanical properties of Al Si8Mg3 alloy fabricated by selective laser melting

Many studies have investigated the selective laser melting(SLM)of AlSi10Mg and AlSi7Mg alloys,but there are still lack of researches focused on Al-Si-Mg alloys specifically tailored for SLM.In this work,a novel high Mg-content AlSi8Mg3 alloy was specifically designed for SLM.The results showed that this new alloy exhibited excellent SLM processability with a lowest porosity of 0.07%.Massive lattice distortion led to a high Vickers hardness in samples fabricated at a high laser power due to the precipitation of Mg_(2)Si nanoparticles from theα-Al matrix induced by high-intensity intrinsic heat treatment during SLM.The maximum microhardness and compressive yield strength of the alloy reached HV(211±4)and(526±12)MPa,respectively.After aging treatment at 150℃,the maximum microhardness and compressive yield strength of the samples were further improved to HV(221±4)and(577±5)MPa,respectively.These values are higher than those of most known aluminum alloys fabricated by SLM.This paper provides a new idea for optimizing the mechanical properties of Al-Si-Mg alloys fabricated using SLM.

A Throughput-Aware Joint Vehicle Route and Access Network Selection Approach Based on SMDP

In intelligent transportation system(ITS), the interworking of vehicular networks(VN) and cellular networks(CN) is proposed to provide high-data-rate services to vehicles. As the network access quality for CN and VN is location related, mobile data offloading(MDO), which dynamically selects access networks for vehicles, should be considered with vehicle route planning to further improve the wireless data throughput of individual vehicles and to enhance the performance of the entire ITS. In this paper, we investigate joint MDO and route selection for an individual vehicle in a metropolitan scenario. We aim to improve the throughput of the target vehicle while guaranteeing its transportation efficiency requirements in terms of traveling time and distance. To achieve this objective, we first formulate the joint route and access network selection problem as a semi-Markov decision process(SMDP). Then we propose an optimal algorithm to calculate its optimal policy. To further reduce the computation complexity, we derive a suboptimal algorithm which reduces the action space. Simulation results demonstrate that the proposed optimal algorithm significantly outperforms the existing work in total throughput and the late arrival ratio.Moreover, the heuristic algorithm is able to substantially reduce the computation time with only slight performance degradation.

Selection of Sinopec Lubricating Oil Producing Bases by Using the AHP Model

The factors affecting the developmcnt of Sinopec lubricating oil were analyzed in this paper, and an analytic hierarchy process （AHP） model for selecting lubricating-oil producing bases was developed. By using this model, nine lubricating oil producing companies under Sinopec were comprehensively evaluated. The evaluation result showed that the Maoming Lubricating Oil Company （Guangdong province）, Jingmen Lubricating Oil Company （Hubei province） and Changcheng Lube Oil Company （Beijing） are top three choices, and should be developed preferentially for the development of Sinopec producing bases of lubricating oil in the future. The conclusions provide the theoretical basis for selecting lubricating oil producing bases for decision makers.