Strategies of selective electroreduction of aqueous nitrate to N_(2) in chloride-free system:A critical review

Electroreduction of nitrate has been gaining wide attention in recent years owing to it's beneficial for converting nitrate into benign N_(2) from the perspective of electrocatalytic denitrification or into value-added ammonia from the perspective of electrocatalytic NH_(3) synthesis.By reason of the undesired formation of ammonia is dominant during electroreduction of nitrate-containing wastewater,chloride has been widely used to improve N_(2) selectivity.Nevertheless,selective electroreduction of nitrate to N2 gas in chloride-containing system poses several drawbacks.In this review,we focus on the key strategies for efficiently enhancing N_(2) selectivity of electroreduction of nitrate in chloride-free system,including optimal selection of elements,combining an active metal catalyst with another metal,manipulating the crystalline morphology and facet orientation,constructing core–shell structure catalysts,etc.Before summarizing the strategies,four possible reaction pathways of electro-reduction of nitrate to N_(2) are discussed.Overall,this review attempts to provide practical strategies for enhancing N2 selectivity without the aid of electrochlorination and highlight directions for future research for designing appropriate electrocatalyst for final electrocatalytic denitrifi-cation.

Mechanism of selective laser trabeculoplasty:a systemic review

Although selective laser trabeculoplasty(SLT)is a recognized method for the treatment of glaucoma,the exact changes in the target tissue and mechanism for its intraocular pressure lowing effect are still unclear.The purpose of this review is to summarize the potential mechanisms of SLT on trabecular meshwork both in vivo and in vitro,so as to reveal the potential mechanism of SLT.SLT may induce immune or inflammatory response in trabecular meshwork(TM)induced by possible oxidative damage etc,and remodel extracellular matrix.It may also induce monocytes to aggregate in TM tissue,increase Schlemm’s canal(SC)cell conductivity,disintegrate cell junction and promote permeability through autocrine and paracrine forms.This provides a theoretical basis for SLT treatment in glaucoma.

Practical Privacy-Preserving ROI Encryption System for Surveillance Videos Supporting Selective Decryption

With the advancement of video recording devices and network infrastructure,we use surveillance cameras to protect our valuable assets.This paper proposes a novel system for encrypting personal information within recorded surveillance videos to enhance efficiency and security.The proposed method leverages Dlib’s CNN-based facial recognition technology to identify Regions of Interest(ROIs)within the video,linking these ROIs to generate unique IDs.These IDs are then combined with a master key to create entity-specific keys,which are used to encrypt the ROIs within the video.This system supports selective decryption,effectively protecting personal information using surveillance footage.Additionally,the system overcomes the limitations of existing ROI recognition technologies by predicting unrecognized frames through post-processing.This research validates the proposed technology through experimental evaluations of execution time and post-processing techniques,ensuring comprehensive personal information protection.Guidelines for setting the thresholds used in this process are also provided.Implementing the proposed method could serve as an effective solution to security vulnerabilities that traditional approaches fail to address.

SOFTWARE SYSTEM FOR SELECTIVE LASER SINTERING

The advent of rapid prototyping & manufacturing techniques represents a major breakthrough in production engineering. This paper is concerned with the software system aspects of the selective laser sintering (SLS),i.e.the issues that deal with an external geometric CAD model to automatically control the physical layering fabrication process as directly as possible ,regardless of the source of the model. The general issues are described and some key methods are given in this paper.

Selective maintenance problem for series–parallel system under economic dependence

In view of the high complexity of the objective world, an economic dependence between subsystems(paired and unpaired) is proposed, and then the maintenance cost and time under different economic dependences are formulated in a simple and consistent manner. Selective maintenance problem under economic dependence(EDSMP) is presented based on a series–parallel system in this paper. A case study shows that the system reliability is promoted to a certain extent, which can validate the validity of the EDSMP model. The influence of the ratio of set-up cost on system performance is mainly discussed under different economic dependences. Several existing improvements of classical exhaust algorithm are further modified to solve a large sized EDSMP rapidly. Experimental results illustrate that these improvements can reduce CPU time significantly.Furthermore the contribution of each improvement is defined here, and then their contributions are compared thoroughly.

Selective transmission and channel estimation in massive MIMO systems

Massive MIMO systems have got extraordinary spectral efficiency using a large number of base station antennas,but it is in the challenge of pilot contamination using the aligned pilots.To address this issue,a selective transmission is proposed using time-shifted pilots with cell grouping,where the strong interfering users in downlink transmission cells are temporally stopped during the pilots transmission in uplink cells.Based on the spatial characteristics of physical channel models,the strong interfering users are selected to minimize the inter-cell interference and the cell grouping is designed to have less temporally stopped users within a smaller area.Furthermore,a Kalman estimator is proposed to reduce the unexpected effect of residual interferences in channel estimation,which exploits both the spatial-time correlation of channels and the share of the interference information.The numerical results show that our scheme significantly improves the channel estimation accuracy and the data rates.

STUDY ON Ni-Cr SYSTEM SOLAR SELECTIVE THIN FILMS PREPARED BY MAGNETRON REACTIVE SPUTTERING PROCESS

Ni-Cr System solar selective thin solid films were prepared by d.c. magnetron reactive sputtering under the atmosphere of O2 and N2. Ni-Cr alloy was chosen as target material and copper sheets as substrate. Using SEAL Spectrophotometer and Talystep to analyze the relations between the selective characteristic and the structure, the formation and the thickness of the thin films. The aim is to obtain good solar selective thin films with high absorptance and low emittance, which is applied to flat plate solar heat collectors.

Selective separation of gallium from aluminum in SDS–Ga–Al and SDS–Ga–Al–fluoride systems by ion flotation

Selective separation of gallium from aluminum by ion flotation using sodium dodecyl sulfate(SDS) as an anionic surfactant and fluoride as an inorganic ligand was investigated. The experimental results were analyzed using the stability constants and speciation diagrams of fluoride metal complexes. The presence of fluoride in the solution has a positive influence upon the separation of gallium from aluminum. The results show that increasing the fluoride concentration makes a more effective separation of gallium from aluminum because of a simultaneous increase in the complexion of aluminum with fluoride and a change in the electrical charge of the aluminum(ALF_4^-). The dehydration model of LIU and DOYLE was also applied to compare the ion flotation and the selectivity coefficients of gallium over aluminum with experimental results.

Preparation of Vitamin E Intermediate from an Inexpensive Substrate by Selective Oxidation of Pseudocumene in HCOOH–H_2O_2 System

In this paper, 2,3,5-trimethyl-1,4-benzoquinone（TMBQ） was synthesized through the direct oxidation of1,2,4-trimethylbenzene（pseudocumene, TMB） in the HCOOH–H2O2 system. The influence ofthree active species was studied, including performic acid（PFA） generated in formic acid, peracetic acid（PAA） generated in acetic acid, and trifluoroperacetic（TFPA） acid generated in trifluoroacetic acid. The effects ofsulfuric acid and sodium formate addition were investigated, the overoxidation ofTMB was discussed, and the main reason for the decreasing selectivity was revealed. The oxidation ofTMB can be controlled and improved through adjusting the reaction temperature, mole ratio ofoxidant to substrate, and reactant concentration. The TMBQ yield of28% was achieved with a TMB concentration of0.2 mol/L, H2O2/TMB mole ratio of6：1, and reaction temperature 37 ℃. The selectivity of72% was obtained with a TMB concentration of0.2 mol/L, H2O2/TMB mole ratio of5：1, and reaction temperature of27 ℃. The reaction mechanisms were proposed and discussed based on the gas chromatography–flame ionization detection（GC–FID） and gas chromatography–mass spectrometer（GC–MS） results.

Allocation of Repairable and Replaceable Components for a System Availability Using Selective Maintenance with Probabilistic Maintenance Time Constraints

In this paper, we obtain optimum allocation of replaceable and repairable components in a system design. When repair and replace time are considered as random in the constraints. We convert probabilistic constraint into an equivalent deterministic constraint by using chance constrained programming. We have used the selective maintenance policy to determine how many components to be replaced & repaired within the limited maintenance time interval and cost. A Numerical example is presented to illustrate the computational procedure and problem is solved by using LINGO Software.

Dynamic model for predicting nitrogen oxide concentration at outlet of selective catalytic reduction denitrification system based on kernel extreme learning machine

To solve the increasing model complexity due to several input variables and large correlations under variable load conditions,a dynamic modeling method combining a kernel extreme learning machine(KELM)and principal component analysis(PCA)was proposed and applied to the prediction of nitrogen oxide(NO_(x))concentration at the outlet of a selective catalytic reduction(SCR)denitrification system.First,PCA is applied to the feature information extraction of input data,and the current and previous sequence values of the extracted information are used as the inputs of the KELM model to reflect the dynamic characteristics of the NO_(x)concentration at the SCR outlet.Then,the model takes the historical data of the NO_(x)concentration at the SCR outlet as the model input to improve its accuracy.Finally,an optimization algorithm is used to determine the optimal parameters of the model.Compared with the Gaussian process regression,long short-term memory,and convolutional neural network models,the prediction errors are reduced by approximately 78.4%,67.6%,and 59.3%,respectively.The results indicate that the proposed dynamic model structure is reliable and can accurately predict NO_(x)concentrations at the outlet of the SCR system.

Selective Reduction of α,β-Unsaturated Amides with NaBH_4/BiCl_3 System

?β-Unsaturated amides with various substitution pattems at the carbon-carbon double And and nitrogen atom can be reduced to the corresponding saturated amides with high selectivity and yields with NaBH4/BiCl3 system.

An Improved Selective Mapping Method for PAPR Reduction in OFDM/OQAM System

Orthogonal frequency division multiplex/offset QAM (OFDM/OQAM) has been proven to be a promising multi-carrier modulation (MCM) technique for the transmission of signals over multipath fading channels. However, OFDM/OQAM has also the intrinsic disadvantage of high peak-to-average-power ratio (PAPR) that should be alleviated. In this paper, a novel selective mapping (SLM) method is proposed for OFDM/OQAM system. Since the pulse shape may cover a few OFDM symbols, the basic principle of the proposed method is to apply the SLM method in the range of the most relevant OFDM symbols. Analysis and simulation results show that, compared to the existing SLM algorithms for OFDM/OQAM system, the proposed method has better PAPR performance and lower computation complexity.

Selective internal radiation therapy segmentectomy:A new minimally invasive curative option for primary liver malignancies?

Transarterial radioembolization or selective internal radiation therapy(SIRT)has emerged as a minimally invasive approach for the treatment of tumors.This percutaneous technique involves the local,intra-arterial delivery of radioactive microspheres directly into the tumor.Historically employed as a palliative measure for liver malignancies,SIRT has gained traction over the past decade as a potential curative option,mirroring the increasing role of radiation segmentectomy.The latest update of the BCLC hepatocellular carcinoma guidelines recognizes SIRT as an effective treatment modality comparable to other local ablative methods,particularly well-suited for patients where surgical resection or ablation is not feasible.Radiation segmentectomy is a more selective approach,aiming to deliver high-dose radiation to one to three specific hepatic segments,while minimizing damage to surrounding healthy tissue.Future research efforts in radiation segmentectomy should prioritize optimizing radiation dosimetry and refining the technique for super-selective administration of radiospheres within the designated hepatic segments.

Recent developments in selective laser processes for wearable devices

Recently,the increasing interest in wearable technology for personal healthcare and smart virtual/augmented reality applications has led to the development of facile fabrication methods.Lasers have long been used to develop original solutions to such challenging technological problems due to their remote,sterile,rapid,and site-selective processing of materials.In this review,recent developments in relevant laser processes are summarized under two separate categories.First,transformative approaches,such as for laser-induced graphene,are introduced.In addition to design optimization and the alteration of a native substrate,the latest advances under a transformative approach now enable more complex material compositions and multilayer device configurations through the simultaneous transformation of heterogeneous precursors,or the sequential addition of functional layers coupled with other electronic elements.In addition,the more conventional laser techniques,such as ablation,sintering,and synthesis,can still be used to enhance the functionality of an entire system through the expansion of applicable materials and the adoption of new mechanisms.Later,various wearable device components developed through the corresponding laser processes are discussed,with an emphasis on chemical/physical sensors and energy devices.In addition,special attention is given to applications that use multiple laser sources or processes,which lay the foundation for the all-laser fabrication of wearable devices.

Synergy of heterogeneous Co/Ni dual atoms enabling selective C-O bond scission of lignin coupling with in-situ N-functionalization

Selective cleavage of Csp^(2)-OCH_(3)bond in lignin without breaking other types of C-O bonds followed by N-functionalization is fascinating for on-purpose valorization of biomass.Here,a Co/Ni-based dual-atom catalyst CoNiDA@NC prepared by in-situ evaporation and acid-etching of metal species from tailor-made metal–organic frameworks was efficient for reductive upgrading of various lignin-derived phenols to cyclohexanols(88.5%–99.9%yields),which had ca.4 times higher reaction rate than the single-atom catalyst and was superior to state-of-the-art heterogeneous catalysts.The synergistic catalysis of Co/Ni dual atoms facilitated both hydrogen dissociation and hydrogenolysis steps,and could optimize adsorption configuration of lignin-derived methoxylated phenols to further favor the Csp^(2)-OCH_(3)cleavage,as elaborated by theoretical calculations.Notably,the CoNi_(DA)@NC catalyst was highly recyclable,and exhibited excellent demethoxylation performance(77.1%yield)in real lignin monomer mixtures.Via in-situ cascade conversion processes assisted by dual-atom catalysis,various high-value N-containing chemicals,including caprolactams and cyclohexylamines,could be produced from lignin.

Dealuminated Hβ zeolite for selective conversion of fructose to furfural and formic acid

The fructose-to-furfural transformation is facing major challenges in the selectivity and high efficiency. Herein, we have developed a simple and effective approach for the selective conversion of fructose to furfural using Hβ zeolite modified by organic acids for dealuminization to regulate its textural and acidic properties. It was found that citric acid-dealuminized Hβ zeolite possessed high specific surface areas, wide channels and high Brønsted acid amount, which facilitated the selective conversion of fructose to furfural with a maximum yield of 76.2% at433 K for 1 h in the γ-butyrolactone(GBL)-H_(2)O system, as well as the concomitant formation of 83.0% formic acid. The^(13)C-isotope labelling experiments and the mechanism revealed that the selective cleavage of C1–C2 or C5–C6 bond on fructose was firstly occurred to form pentose or C5 intermediate by weak Brønsted acid, which was then dehydrated to furfural by strong Brønsted acid. Also this dealuminized Hβ catalyst showed the great recycling performance and was active for the conversion of glucose and mannose.

On the role of cellular microstructure in austenite reversion in selective laser melted maraging steel

Cellular microstructure is a unique feature in alloys fabricated by selective laser melting(SLM).Abundant efforts have been made to reveal the formation mechanism of cellular microstructures and its influences on mechanical performances,while its potential role in microstructure architecting during post-heat treatment is rarely explored.In this work,we investigated the features of cellular microstructures in an SLM-fabricated 18Ni(300)steel and revealed how this microstructure influences austenite reversion upon aging.Segregation of Ti and Mo is experimentally detected at cell boundaries.It is interestingly found that a distinctive reverted austenite network forms rapidly along cell boundaries during aging,whereas much less austenite is found in conventionally treated 18Ni(300)steels.The rapid austenite reversion in SLM-fabricated material proceeds mainly via the growth of retained austenite on cell boundaries while the nucleation and growth of new austenite grains is negligible.Phase-field simulations suggest austenite grows in a fast,partitionless manner along cell boundaries where the chemical driving force for austen-ite reversion is substantially enhanced by Ti and Mo segregations,but in a sluggish,partitioning manner towards cell interiors.Contrary to conventional views that austenite fraction should be confined to avoid strength reduction,current SLM-fabricated 18Ni(300)steel containing∼13%cellular austenite is found to have higher tensile strength compared to its counterparts with negligible austenite.The design of austen-ite also shows its potential to enhance fracture toughness.The current study demonstrates that cellular structures could substantially alter austenite reversion behavior,providing a new route for microstructure architecting in additively manufactured steels.

Selective leaching of lithium from spent lithium-ion batteries using sulfuric acid and oxalic acid

Traditional hydrometallurgical methods for recovering spent lithium-ion batteries(LIBs)involve acid leaching to simultaneously extract all valuable metals into the leachate.These methods usually are followed by a series of separation steps such as precipitation,extraction,and stripping to separate the individual valuable metals.In this study,we present a process for selectively leaching lithium through the synergistic effect of sulfuric and oxalic acids.Under optimal leaching conditions(leaching time of 1.5 h,leaching temperature of 70°C,liquid-solid ratio of 4 mL/g,oxalic acid ratio of 1.3,and sulfuric acid ratio of 1.3),the lithium leaching efficiency reached89.6%,and the leaching efficiencies of Ni,Co,and Mn were 12.8%,6.5%,and 21.7%.X-ray diffraction(XRD)and inductively coupled plasma optical emission spectrometer(ICP-OES)analyses showed that most of the Ni,Co,and Mn in the raw material remained as solid residue oxides and oxalates.This study offers a new approach to enriching the relevant theory for selectively recovering lithium from spent LIBs.

Covalency competition induced selective bond breakage and surface reconstruction in manganese cobaltite towards enhanced electrochemical charge storage

Manganese cobaltite(MnCo_(2)_(4))is a promising electrode material because of its attractive redox chemistry and excellent charge storage capability.Our previous work demonstrated that the octahedrally-coordinated Mn are prone to react with the hydroxyl ions in alkaline electrolyte upon electrochemical cycling and separates on the surface of spinel to reconstruct into d-MnO_(2) nanosheets irreversibly,thus results in a change of the reaction mechanism with Kþion intercalation.However,the low capacity has greatly limited its practical application.Herein,we found that the tetrahedrally-coordinated Co_(2) þions were leached when MnCo_(2)_(4) was equilibrated in 1 mol L^(-1) HCl solution,leading to the formation of layered CoOOH on MnCo_(2)_(4) surface which is originated from the covalency competition induced selective breakage of the CoT–O bond in CoT–O–CoO and subsequent rearrangement of free Co_(6) octahedra.The as-formed CoOOH is stable upon cycling in alkaline electrolyte,exhibits conversion reaction mechanism with facile proton diffusion and is free of massive structural evolution,thus enables utilization of the bulk electrode material and realizes enhanced specific capacity as well as facilitated charge transfer and ion diffusion.In general,our work not only offers a feasible approach to deliberate modification of MnCo_(2)_(4)'s surface structure,but also provides an in-depth understanding of its charge storage mechanism,which enables rational design of the spinel oxides with promising charge storage properties.