Magnesium alloys with superhydrophobicity are constructed by controlling rough surface structure and grafting long hydrophobic alkyl chains. Changes of morphology, phase structure, chemical composition as well as wett...Magnesium alloys with superhydrophobicity are constructed by controlling rough surface structure and grafting long hydrophobic alkyl chains. Changes of morphology, phase structure, chemical composition as well as wettability, corrosion resistance of superhydrophobic magnesium alloy upon immersing in corrosive media are investigated comparatively. Meanwhile, the contaminating particles on as-prepared superhydrophobic surfaces can be taken away easily by rolling water droplets. Therefore, the results show that as-prepared superhydrophobic magnesium alloys exhibit enhanced corrosion resistance and self-healing performance. Finally, anti-corrosion and self-cleaning mechanisms are deduced. It can be concluded that it is an effective strategy of preparing superhydrophobic surfaces for improving the corrosion resistance and selfcleaning performance of magnesium alloys.展开更多
In this work, a simple method was carried out to successfully fabricate superoleophilic and superhydrophobic N-dodecyltrimethoxysilane@tungsten trioxide coated copper mesh. The as-fabricated copper mesh displayed prom...In this work, a simple method was carried out to successfully fabricate superoleophilic and superhydrophobic N-dodecyltrimethoxysilane@tungsten trioxide coated copper mesh. The as-fabricated copper mesh displayed prominent superoleophilicity and superhydrophobicity with a huge water contact angle about 154.39° and oil contact angle near 0° Moreover, the coated copper mesh showed high separation efficiency approximately 99.3%, and huge water flux about 9962.3 L·h^-1·m-2, which could be used to separate various organic solvents/ water mixtures. Furthermore, the coated copper mesh showed favorable stability that the separation efficiency remained above 90% after 10 separation cycles. Benefiting from the excellent photocatalytic degradation ability of tungsten trioxide, the coated copper mesh possessed the self-cleaning capacity. Therefore, the mesh contaminated with lubricating oil could regain superhydrophobic property, and this property of self-cleaning permitted that the fabricated copper mesh could be repeatedly used for oil and water separation.展开更多
In this study, vanadium doped TiO2 thin films were deposited on glass substrates using a sol-gel dip-coating process. X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV-Vis spectrophotomete...In this study, vanadium doped TiO2 thin films were deposited on glass substrates using a sol-gel dip-coating process. X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV-Vis spectrophotometer were used to characterize the structural, chemical and the optical properties of the thin films. The photo-catalytic activities of films were investigated by methylene blue degradation. Water contact angle on the film surfaces was measured by a water contact angle analyzer. The results indicated that vanadium doping had a significant effect on the self-cleaning properties of TiO2 thin films.展开更多
A superhydrophobic aluminum sheet is fabricated via a hot water immersing process and subsequently surface modification with heptadecafluorodecyltrimethoxy-silane （HTMS）. As revealed by the scan electron microscopy ...A superhydrophobic aluminum sheet is fabricated via a hot water immersing process and subsequently surface modification with heptadecafluorodecyltrimethoxy-silane （HTMS）. As revealed by the scan electron microscopy （SEM）, X-ray diffraction （XRD）, and Fourier-transform infrared spectrophotometer （FTIR） results, a rough pseudoboehmite film is formed on the aluminum sheet, and HTMS molecules are grafted on the film surface successfully. These two factors make the treated aluminum sheet present superhydrophobicity with a water contact angle larger than 160° and sliding angle less than 5°, and possess a self-cleaning property. Furthermore, the flexible superhydrophobic aluminum sheet could be pasted to a cylinder surface without destroying its superhydrophobicity. At the end, the effect of hot water treatment time on superhydrophobicity is investigated.展开更多
The present study involves the preparation of TiO 2/ SiO 2nanocrystals and their application in self-cleaning wool-polyester fabrics.The TiO 2/ SiO 2nanocrystals were successfully synthesized and deposited onto wool-p...The present study involves the preparation of TiO 2/ SiO 2nanocrystals and their application in self-cleaning wool-polyester fabrics.The TiO 2/ SiO 2nanocrystals were successfully synthesized and deposited onto wool-polyester fabrics using the low-temperature sol-gel technique.The as-prepared nanocomposites and the nanocomposites coated samples were characterized by X-ray diffraction( XRD) and scanning electron microscopy( SEM),respectively.The XRD and SEM results showed that the single-phase anatase nanocrystallites were formed and loaded on the fabric surface successfully.The photocatalytic activities of TiO 2-coated and TiO 2/ SiO 2-coated wool-polyester fabrics were measured by studying photodegradation of methylene blue dye.Comparison of the photocatalytic activity of the coated samples reveals superiority of TiO 2/ SiO 2modified sample with respect to that of pure TiO 2modified sample.Our observations indicate that by applying this technique to the fabrics,self-cleaning materials can be designed for practical application.展开更多
A type of self-cleaning pre-coated steel sheet with excellent self-cleaning performance was developed using hydrophilic surface treatment technology. To understand the self-cleaning properties of this pre-coated steel...A type of self-cleaning pre-coated steel sheet with excellent self-cleaning performance was developed using hydrophilic surface treatment technology. To understand the self-cleaning properties of this pre-coated steel sheet in an industrial environment, the Jiangjin natural environmental test station was chosen as the outdoor exposure test to be conducted, and the self-cleaning performance of the steel sheet was studied by measuring the water contact angle, stain resistance factor, color difference, and gloss of the steel sheet during the outdoor exposure test. The water contact angle of the self-cleaning steel sheet quickly decreased from 84° to 29° during the outdoor exposure test, and the steel sheet showed excellent hydrophilic properties, which were beneficial to the spread of rain drops and detrimental to the accumulation of the surface pollutants. After an outdoor exposure of 12 months,the self-cleaning steel sheet had a higher stain resistance and cleaner surface than the comparison sample sheet, demonstrating its excellent self-cleaning properties. Moreover, the color difference and gloss rate of the self-cleaning steel ＇sheet were similar to those of the pre-coated steel sheet without hydrophilic surface treatment. Therefore, the hydrophilic surface treatment technology used in this study did not affect the anti-aging property of the self-cleaning steel sheet.展开更多
Finishing using TiO2-nanosol treatment of cellulose acetate (CA) fabrics before and after the latter were pretreated with H2O2was undertaken with a view to impart unique properties to CA fabrics, notably, self-cleanin...Finishing using TiO2-nanosol treatment of cellulose acetate (CA) fabrics before and after the latter were pretreated with H2O2was undertaken with a view to impart unique properties to CA fabrics, notably, self-cleaning. Finishing was performed as per the pad-dry-cure method. The finishing treatment involved dispersing the nano-sized TiO2particles in a mixture of water and ethylene glycol (1:1) and application of the dispersions to CA fabrics was made under a variety of conditions. Self cleaning ability of the fabrics is favored by 1) increasing the concentration of TiO2-nanosol to certain limit;2) prolongation of curing time up to 15 second;3) raising the microwave power from 80% to 100% but with the certainty that power of 90% is the most proper. Besides, exposure time-to UV radiation-up to 90 minutes is essential to have remarkable self cleaning properties while keeping other technical properties, namely, strength, roughness and wettability practically unaltered. Incorporation of binder in the finishing pad-bath helps stabilizing the deposition of TiO2 with excellent self-cleaning. Pretreatment of CA fabrics with H2O2 is a pre requisite to guarantee excellent self-cleaning ability. Thermofixation and microwave fixation produces fabrics with very comparable technical properties.展开更多
The properties and microstructure of sol self-clean bonded Al2O3-SiC-C castable in iron runner were studied, and the relation between the amount of sol self- clean binder and the properties of castable were discussed....The properties and microstructure of sol self-clean bonded Al2O3-SiC-C castable in iron runner were studied, and the relation between the amount of sol self- clean binder and the properties of castable were discussed. It is believed that the addition of sol self-clean binder can improve the compressive strength, but has little effect on the bulk density and the apparent porosity, which enable the castable to be applicable in different conditions.展开更多
The performance of solar panels significantly degrades due to dust accumulation but cleaning too frequently will severely impact the financial benefits of the installation of solar panels. This paper assumes a realist...The performance of solar panels significantly degrades due to dust accumulation but cleaning too frequently will severely impact the financial benefits of the installation of solar panels. This paper assumes a realistic linear model for accumulation of dust on the solar panels and the resulting hourly average of absolute loss of efficiency in solar panels. This model accurately depicts the fact that energy production by solar panels occurs during sunshine hours only and also accounts for the degradation in the efficiency of solar panels due to dust accumulation throughout the entire day. Based on this, the optimal number of days for maximum financial profit and the critical number of days (above which there is no profit in installing solar panels) have been estimated. Furthermore, we have suggested a formalism to help estimate the finances for self-cleaning technology for PV system and also for calculating the minimum payback period for installing solar panels with the financial cost of the cleaning cycles properly considered. This research could be motivation for companies in developing self-cleaning mechanism for PV system.展开更多
Background: Self-cleaning of ears with different objects is a common practice among school children with scanty report in literature. Aim: The aim of this study was to determine the prevalence and profile of self-ear ...Background: Self-cleaning of ears with different objects is a common practice among school children with scanty report in literature. Aim: The aim of this study was to determine the prevalence and profile of self-ear cleaning among school children. Methods: It was a cross-sectional institutional-based study which was carried out among school children in Ekiti, south western Nigeria from January 2017, to March 2017. Results: A total of 174 students participated in this study. Their age ranged between 13 and 17 years. The highest number of participant was found at the age of 15 years. One hundred and eighteen (67.8%) of them had carried out self ear cleaning. Personal hygiene was the commonest reason for self ear cleaning in 28.8% of the students. Cotton buds were mostly used by the respondents in 51.7% of them. Injury to the external auditory canal (EAC) was the most recorded complications. Conclusion: The outcome of this study shows that self-ear cleaning practices were common among school children with a prevalence of 67.8%. Cotton buds were the commonest objects used. Avoidable complications were reported among respondents. There is a need to intensify efforts on public enlightenment programme and the establishment of school health programme in our various schools.展开更多
Background: Self ear cleaning with cotton buds and other objects is a common practice. Objective: To determine the sociodemographic characteristics and the prevalence of self ear cleaning habit among patients attendin...Background: Self ear cleaning with cotton buds and other objects is a common practice. Objective: To determine the sociodemographic characteristics and the prevalence of self ear cleaning habit among patients attending a family medicine clinic in a teaching hospital in Sokoto metropolis. Materials and Methods: This was a 4 weeks prospective study carried out between May and June, 2013 at Usmanu Danfodiyo University Teaching Hospital and Specialist Hospital Sokoto. A structured self response questionnaire containing items on sociodemographic characteristics, frequency of administering objects into the ear and complications of self ear cleaning was administered to the respondents after institutional research ethical clearance. The data were analysed using SPSS for windows version 16.0. P-value was considered significantly if less than 0.05. Results: A total of 200 subjects were included in this study, comprising of 93 (46.5%) males and 107 (53.5%) females. Their ages ranged from 18-57 years with the mean age being 30.29 years (±8.70). Eighty percent (160) of the respondents practise self ear cleaning. Types of objects included writing objects and cotton buds. For many of the subjects, the frequency of insertion was once daily and both ears were frequently cleaned. Complications that have arisen due to the practice included otitis externa. Conclusion: Self ear cleaning was prevalent in the subjects. Considering the complications that may arise, ear cleaning is better done by trained health personnel.展开更多
This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & sil...This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.展开更多
基金Funded by the National Natural Science Foundation of China(No.21161012)
文摘Magnesium alloys with superhydrophobicity are constructed by controlling rough surface structure and grafting long hydrophobic alkyl chains. Changes of morphology, phase structure, chemical composition as well as wettability, corrosion resistance of superhydrophobic magnesium alloy upon immersing in corrosive media are investigated comparatively. Meanwhile, the contaminating particles on as-prepared superhydrophobic surfaces can be taken away easily by rolling water droplets. Therefore, the results show that as-prepared superhydrophobic magnesium alloys exhibit enhanced corrosion resistance and self-healing performance. Finally, anti-corrosion and self-cleaning mechanisms are deduced. It can be concluded that it is an effective strategy of preparing superhydrophobic surfaces for improving the corrosion resistance and selfcleaning performance of magnesium alloys.
基金the National Natural Science Foundation of China(No.21776319 and No.21476269).
文摘In this work, a simple method was carried out to successfully fabricate superoleophilic and superhydrophobic N-dodecyltrimethoxysilane@tungsten trioxide coated copper mesh. The as-fabricated copper mesh displayed prominent superoleophilicity and superhydrophobicity with a huge water contact angle about 154.39° and oil contact angle near 0° Moreover, the coated copper mesh showed high separation efficiency approximately 99.3%, and huge water flux about 9962.3 L·h^-1·m-2, which could be used to separate various organic solvents/ water mixtures. Furthermore, the coated copper mesh showed favorable stability that the separation efficiency remained above 90% after 10 separation cycles. Benefiting from the excellent photocatalytic degradation ability of tungsten trioxide, the coated copper mesh possessed the self-cleaning capacity. Therefore, the mesh contaminated with lubricating oil could regain superhydrophobic property, and this property of self-cleaning permitted that the fabricated copper mesh could be repeatedly used for oil and water separation.
文摘In this study, vanadium doped TiO2 thin films were deposited on glass substrates using a sol-gel dip-coating process. X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and UV-Vis spectrophotometer were used to characterize the structural, chemical and the optical properties of the thin films. The photo-catalytic activities of films were investigated by methylene blue degradation. Water contact angle on the film surfaces was measured by a water contact angle analyzer. The results indicated that vanadium doping had a significant effect on the self-cleaning properties of TiO2 thin films.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.78872129 and 81172082)
文摘A superhydrophobic aluminum sheet is fabricated via a hot water immersing process and subsequently surface modification with heptadecafluorodecyltrimethoxy-silane （HTMS）. As revealed by the scan electron microscopy （SEM）, X-ray diffraction （XRD）, and Fourier-transform infrared spectrophotometer （FTIR） results, a rough pseudoboehmite film is formed on the aluminum sheet, and HTMS molecules are grafted on the film surface successfully. These two factors make the treated aluminum sheet present superhydrophobicity with a water contact angle larger than 160° and sliding angle less than 5°, and possess a self-cleaning property. Furthermore, the flexible superhydrophobic aluminum sheet could be pasted to a cylinder surface without destroying its superhydrophobicity. At the end, the effect of hot water treatment time on superhydrophobicity is investigated.
基金the Fundamental Research Funds for the Central Universities,China，China Postdoctoral Science
文摘The present study involves the preparation of TiO 2/ SiO 2nanocrystals and their application in self-cleaning wool-polyester fabrics.The TiO 2/ SiO 2nanocrystals were successfully synthesized and deposited onto wool-polyester fabrics using the low-temperature sol-gel technique.The as-prepared nanocomposites and the nanocomposites coated samples were characterized by X-ray diffraction( XRD) and scanning electron microscopy( SEM),respectively.The XRD and SEM results showed that the single-phase anatase nanocrystallites were formed and loaded on the fabric surface successfully.The photocatalytic activities of TiO 2-coated and TiO 2/ SiO 2-coated wool-polyester fabrics were measured by studying photodegradation of methylene blue dye.Comparison of the photocatalytic activity of the coated samples reveals superiority of TiO 2/ SiO 2modified sample with respect to that of pure TiO 2modified sample.Our observations indicate that by applying this technique to the fabrics,self-cleaning materials can be designed for practical application.
文摘A type of self-cleaning pre-coated steel sheet with excellent self-cleaning performance was developed using hydrophilic surface treatment technology. To understand the self-cleaning properties of this pre-coated steel sheet in an industrial environment, the Jiangjin natural environmental test station was chosen as the outdoor exposure test to be conducted, and the self-cleaning performance of the steel sheet was studied by measuring the water contact angle, stain resistance factor, color difference, and gloss of the steel sheet during the outdoor exposure test. The water contact angle of the self-cleaning steel sheet quickly decreased from 84° to 29° during the outdoor exposure test, and the steel sheet showed excellent hydrophilic properties, which were beneficial to the spread of rain drops and detrimental to the accumulation of the surface pollutants. After an outdoor exposure of 12 months,the self-cleaning steel sheet had a higher stain resistance and cleaner surface than the comparison sample sheet, demonstrating its excellent self-cleaning properties. Moreover, the color difference and gloss rate of the self-cleaning steel ＇sheet were similar to those of the pre-coated steel sheet without hydrophilic surface treatment. Therefore, the hydrophilic surface treatment technology used in this study did not affect the anti-aging property of the self-cleaning steel sheet.
文摘Finishing using TiO2-nanosol treatment of cellulose acetate (CA) fabrics before and after the latter were pretreated with H2O2was undertaken with a view to impart unique properties to CA fabrics, notably, self-cleaning. Finishing was performed as per the pad-dry-cure method. The finishing treatment involved dispersing the nano-sized TiO2particles in a mixture of water and ethylene glycol (1:1) and application of the dispersions to CA fabrics was made under a variety of conditions. Self cleaning ability of the fabrics is favored by 1) increasing the concentration of TiO2-nanosol to certain limit;2) prolongation of curing time up to 15 second;3) raising the microwave power from 80% to 100% but with the certainty that power of 90% is the most proper. Besides, exposure time-to UV radiation-up to 90 minutes is essential to have remarkable self cleaning properties while keeping other technical properties, namely, strength, roughness and wettability practically unaltered. Incorporation of binder in the finishing pad-bath helps stabilizing the deposition of TiO2 with excellent self-cleaning. Pretreatment of CA fabrics with H2O2 is a pre requisite to guarantee excellent self-cleaning ability. Thermofixation and microwave fixation produces fabrics with very comparable technical properties.
文摘The properties and microstructure of sol self-clean bonded Al2O3-SiC-C castable in iron runner were studied, and the relation between the amount of sol self- clean binder and the properties of castable were discussed. It is believed that the addition of sol self-clean binder can improve the compressive strength, but has little effect on the bulk density and the apparent porosity, which enable the castable to be applicable in different conditions.
文摘The performance of solar panels significantly degrades due to dust accumulation but cleaning too frequently will severely impact the financial benefits of the installation of solar panels. This paper assumes a realistic linear model for accumulation of dust on the solar panels and the resulting hourly average of absolute loss of efficiency in solar panels. This model accurately depicts the fact that energy production by solar panels occurs during sunshine hours only and also accounts for the degradation in the efficiency of solar panels due to dust accumulation throughout the entire day. Based on this, the optimal number of days for maximum financial profit and the critical number of days (above which there is no profit in installing solar panels) have been estimated. Furthermore, we have suggested a formalism to help estimate the finances for self-cleaning technology for PV system and also for calculating the minimum payback period for installing solar panels with the financial cost of the cleaning cycles properly considered. This research could be motivation for companies in developing self-cleaning mechanism for PV system.
文摘Background: Self-cleaning of ears with different objects is a common practice among school children with scanty report in literature. Aim: The aim of this study was to determine the prevalence and profile of self-ear cleaning among school children. Methods: It was a cross-sectional institutional-based study which was carried out among school children in Ekiti, south western Nigeria from January 2017, to March 2017. Results: A total of 174 students participated in this study. Their age ranged between 13 and 17 years. The highest number of participant was found at the age of 15 years. One hundred and eighteen (67.8%) of them had carried out self ear cleaning. Personal hygiene was the commonest reason for self ear cleaning in 28.8% of the students. Cotton buds were mostly used by the respondents in 51.7% of them. Injury to the external auditory canal (EAC) was the most recorded complications. Conclusion: The outcome of this study shows that self-ear cleaning practices were common among school children with a prevalence of 67.8%. Cotton buds were the commonest objects used. Avoidable complications were reported among respondents. There is a need to intensify efforts on public enlightenment programme and the establishment of school health programme in our various schools.
文摘Background: Self ear cleaning with cotton buds and other objects is a common practice. Objective: To determine the sociodemographic characteristics and the prevalence of self ear cleaning habit among patients attending a family medicine clinic in a teaching hospital in Sokoto metropolis. Materials and Methods: This was a 4 weeks prospective study carried out between May and June, 2013 at Usmanu Danfodiyo University Teaching Hospital and Specialist Hospital Sokoto. A structured self response questionnaire containing items on sociodemographic characteristics, frequency of administering objects into the ear and complications of self ear cleaning was administered to the respondents after institutional research ethical clearance. The data were analysed using SPSS for windows version 16.0. P-value was considered significantly if less than 0.05. Results: A total of 200 subjects were included in this study, comprising of 93 (46.5%) males and 107 (53.5%) females. Their ages ranged from 18-57 years with the mean age being 30.29 years (±8.70). Eighty percent (160) of the respondents practise self ear cleaning. Types of objects included writing objects and cotton buds. For many of the subjects, the frequency of insertion was once daily and both ears were frequently cleaned. Complications that have arisen due to the practice included otitis externa. Conclusion: Self ear cleaning was prevalent in the subjects. Considering the complications that may arise, ear cleaning is better done by trained health personnel.
文摘This paper concentrates on the development of glasses with self-cleaning surfaces exhibiting high water contact angles. In this study, we prepared super-hydrophobic nano-ceramic coated glass based on titania & silica using simple sol-gel & dip coating methods and studied the best composition of the coatings by altering ratios of titanium tetraisopropoxide (TTIP)/tetraethyl orthosilicate (TEOS) with different homogenizing agents. We characterized the coatings by surface roughness measurement, percentage of optical transmission, static contact angle, near-infrared (NIR) transmission, and diffuse reflectance. The fabrication of coatings on glass substrates played an important role in increasing the water contact angle of about 95° and visible & NIR transmission of about 90%. We compared our modified glass substrate with commercial low emissivity (Low E) glass using X-ray diffraction (XRD) analysis, which showed pure amorphous surface claiming excellent wettability and thus the prepared glass substrate could have a variety of applications in different fields.
