Sol-Gel Preparation of TiO2/SiO2 Nanocomposites and Their Application in Self- cleaning Textiles

The present study involves the preparation of TiO2/SiO2 nanocrystals and their application in self-clcaning wool-polyester fabrics. The TiO2/SiO2 nanocrystals were successfully synthesized and deposited onto wool-polyester fabrics using the low-temperature sol-gel technique. The as-prepared nanoeomposites and the nanocomposites coated samples were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）, respectively. The XRD and SEM results showed that the single-phase anatase nanocrystallites were formed and loaded on the fabric surface successfully. The photocatalytic activities of TiO2 -coated and TiO2/SiO2-coated wool-polyester fabrics were measured by studying photodegradation of methylene blue dye. Comparison of the photocatalytic activity of the coated samples reveals superiority of TiO2/SiO2 modified sample with respect to that of pure TiO2 modified sample. Our observations indicate that by applying this technique to the fabrics, self-cleaning materials can be designed for practical application.

Wellbore Cleaning Degree and Hydraulic Extension in Shale Oil Horizontal Wells

The efficient development and exploitation of shale oil depends on long-distance horizontal wells. As the degreeof cleaning of the wellbore plays a key role in these processes, in this study, this problem is investigated experimentallyby focusing on the dimensionless cuttings bed height. A method is proposed to calculate the horizontalwellhydraulic extension taking into account the influence of the wellbore cleaning degree on the wellborepressure distribution and assess the effect of a variety of factors such as the bottom hole pressure, the circulatingpressure drop, the drilling pump performance and the formation properties. The analysis shows that the hydraulicextension of horizontal wells decreases with an increase in the cuttings bed height, and the higher the displacementof drilling fluid, the faster the hydraulic extension declines. The annular pressure drop of the horizontalsection increases with the increase of the cuttings bed height, resulting in a higher bottom-hole pressure. Severalarguments are provided to guide the safe drilling of shale oil horizontal wells and overcome the limits of currenttechnological approaches.

Overview of Factors Affecting Dust Deposition on Photovoltaic Cells and Cleaning Methods

Dust deposition on the surface of photovoltaic (PV) cells poses a significant challenge to their efficiency, especially in arid regions characterized by desert and semi-desert conditions. Despite the pronounced impact of dust accumulation, these regions offer optimal solar radiation and minimal cloud cover, making them ideal candidates for widespread PV cell deployment. Various surface cleaning methods exist, each employing distinct approaches. Choosing an appropriate cleaning method requires a comprehensive understanding of the mechanisms involved in both dust deposition on module surfaces and dust adhesion to PV cell surfaces. The mechanisms governing dust deposition and adhesion are complex and multifaceted, influenced by factors such as the nature and properties of the dust particles, environmental climatic conditions, characteristics of protective coatings, and the specific location of the PV installation. These factors exhibit regional variations, necessitating the implementation of diverse cleaning approaches tailored to the unique conditions of each location. The first part of this article explores the factors influencing dust deposition on PV cell surfaces, delving into the intricate interplay of environmental variables and particle characteristics. Subsequently, the second part addresses various cleaning methods, offering an analysis of their respective advantages and disadvantages. By comprehensively examining the factors influencing dust accumulation and evaluating the effectiveness of different cleaning strategies, this article aims to contribute valuable insights to the ongoing efforts to optimize the performance and longevity of photovoltaic systems in diverse geographical contexts.

Data cleaning method for the process of acid production with flue gas based on improved random forest

Acid production with flue gas is a complex nonlinear process with multiple variables and strong coupling.The operation data is an important basis for state monitoring,optimal control,and fault diagnosis.However,the operating environment of acid production with flue gas is complex and there is much equipment.The data obtained by the detection equipment is seriously polluted and prone to abnormal phenomena such as data loss and outliers.Therefore,to solve the problem of abnormal data in the process of acid production with flue gas,a data cleaning method based on improved random forest is proposed.Firstly,an outlier data recognition model based on isolation forest is designed to identify and eliminate the outliers in the dataset.Secondly,an improved random forest regression model is established.Genetic algorithm is used to optimize the hyperparameters of the random forest regression model.Then the optimal parameter combination is found in the search space and the trend of data is predicted.Finally,the improved random forest data cleaning method is used to compensate for the missing data after eliminating abnormal data and the data cleaning is realized.Results show that the proposed method can accurately eliminate and compensate for the abnormal data in the process of acid production with flue gas.The method improves the accuracy of compensation for missing data.With the data after cleaning,a more accurate model can be established,which is significant to the subsequent temperature control.The conversion rate of SO_(2) can be further improved,thereby improving the yield of sulfuric acid and economic benefits.

Investigation of a facile plasma-driven method for in situ cleaning of metal-based contamination

Self-cleaning of tin contaminants was realized utilizing a self-driven hydrogen plasma.Cleaning rates of 0.7-6 nm min-1were achieved for removal of discontinuous tin particles at different powers.The analysis of topography and cross-sectional morphology revealed that the removal of tin particles was achieved through top-down cleaning with hydrogen plasma,where the upper part of spherical tin particles was always more intensely cleaned under the synergistic effect of hydrogen atoms and ions due to the vertical incidence of ions to the substrate during the whole cleaning process.Redeposition of tin atoms caused by physical sputtering and its promotion of the chemical cleaning effect was observed for the first time.Reflectance recovery measurements during cleaning and surface analysis of the substrate after cleaning indicated that nondestructive cleaning with a reflectance loss of less than 1%can be achieved at a relatively low power of120 W.Plasma-induced substrate damage,such as holes and valleys,reduced the reflectance of the substrate when cleaning was performed at a high power greater than 120 W,so this method should only be considered for application under conditions without substrate exposure.This study provides a comprehensive understanding of the removal of discontinuous tin particles using the in situ self-driven plasma cleaning method,and also provides meaningful guidance for the extension of this method in other potential fields of application.

Study of Oil-Bearing Drill Cuttings Cleaning and De-Oiling Treatment Method for Shale Gas Reservoirs

Due to its extensive use in shale gas exploration and development,oil-based drilling fluids generate large amounts of oil-bearing drill cuttings during the drilling process.The large amount of oil-bearing drill cuttings generated during the drilling process can lead to serious secondary contamination.In this study,a wetting agent FSC-6 with good hydrophobic and oleophobic properties was synthesized to construct an efficient oil removal system.For the first time,the mechanism of this system was analyzed by using the theory of adhesion function,interfacial tension and wettability.At the same time,a combined acoustic-chemical treatment process was applied to the wastewater and slag generated after the cleaning of the oil-bearing drill cuttings.The experimental results show that the application of this pollution-free technology can effectively solve the environmental pollution and resource recovery problems of oil-bearing drill cuttings.It meets the standard of drilling chips with oil content less than 2%in SY/T7422-2018“Oil-based drilling fluid drilling chips treatment system for oil and gas drilling equipment”.

Scheduling a Single-Arm Multi-Cluster Tool With a Condition-Based Cleaning Operation

As wafer circuit widths shrink less than 10 nm,stringent quality control is imposed on the wafer fabrication processes. Therefore, wafer residency time constraints and chamber cleaning operations are widely required in chemical vapor deposition, coating processes, etc. They increase scheduling complexity in cluster tools. In this paper, we focus on scheduling single-arm multi-cluster tools with chamber cleaning operations subject to wafer residency time constraints. When a chamber is being cleaned, it can be viewed as processing a virtual wafer. In this way, chamber cleaning operations can be performed while wafer residency time constraints for real wafers are not violated. Based on such a method, we present the necessary and sufficient conditions to analytically check whether a single-arm multi-cluster tool can be scheduled with a chamber cleaning operation and wafer residency time constraints. An algorithm is proposed to adjust the cycle time for a cleaning operation that lasts a long cleaning time.Meanwhile, algorithms for a feasible schedule are also derived.And an algorithm is presented for operating a multi-cluster tool back to a steady state after the cleaning. Illustrative examples are given to show the application and effectiveness of the proposed method.

关于*r-clean环

称对合环为*r-clean环是指环中任一元素都可表示为投射子和*-正则元的和.研究了该环的一些扩张性质,并给出了*-阿贝尔的*r-clean环中元素的刻画.

Cleaning of Multi-Source Uncertain Time Series Data Based on PageRank

There are errors in multi-source uncertain time series data.Truth discovery methods for time series data are effective in finding more accurate values,but some have limitations in their usability.To tackle this challenge,we propose a new and convenient truth discovery method to handle time series data.A more accurate sample is closer to the truth and,consequently,to other accurate samples.Because the mutual-confirm relationship between sensors is very similar to the mutual-quote relationship between web pages,we evaluate sensor reliability based on PageRank and then estimate the truth by sensor reliability.Therefore,this method does not rely on smoothness assumptions or prior knowledge of the data.Finally,we validate the effectiveness and efficiency of the proposed method on real-world and synthetic data sets,respectively.

Hydraulic modeling and optimization of jet mill bit considering the characteristics of depressurization and cuttings cleaning

A jet mill bit(JMB)is proposed to increase the drilling efficiency and safety of horizontal wells,which has the hydraulic characteristics of depressurization and cuttings cleaning.This paper fills the gap in the hydraulic study of the JMB by focusing on the hydraulic modeling and optimization of the JMB and considering these two hydraulic characteristics.First,the hydraulic depressurization model and the hydraulic cuttings cleaning model of the JMB are developed respectively.In the models,the pressure ratio and efficiency are chosen as the evaluation parameters of the depressurization capacity of the JMB,and the jet hydraulic power and jet impact force are chosen as the evaluation parameters of cuttings cleaning capacity of the JMB.Second,based on the hydraulic models,the effects of model parameters[friction loss coefficient,target inclination angle,rate of penetration(ROP),flow ratio,and well depth]on the hydraulic performance of the JMB are investigated.The results show that an increase in the friction loss coefficient and target inclination angle cause a significant reduction in the hydraulic depressurization capacity,and the effect of ROP is negligible.The flow ratio is positively related to the hydraulic cuttings cleaning capacity,and the well depth determines the maximum hydraulic cuttings cleaning capacity.Finally,by combining the hydraulic depressurization model and hydraulic cuttings cleaning model,an optimization method of JMB hydraulics is proposed to simultaneously maximize the jet depressurization capacity and the cuttings cleaning capacity.According to the drilling parameters given,the optimal values of the drilling fluid flow rate,backward nozzle diameter,forward nozzle diameter,and throat diameter can be determined.Moreover,a case study is conducted to verify the effectiveness of the optimization method.

Effect of a disposable endoscope precleaning kit in the cleaning procedure of gastrointestinal endoscope:A multi-center observational study

BACKGROUND Precleaning is a key step in endoscopic reprocessing.AIM To develop an effective and economic endoscope cleaning method by using a disposable endoscope bedside precleaning kit.METHODS Altogether,228 used gastrointestinal endoscopes were selected from five high-volume endoscopy units and precleaned by a traditional precleaning bucket(group T)or a disposable endoscope bedside precleaning kit(group D).Each group was further subdivided based on the replacement frequency of the cleaning solution,which was replaced every time in subgroups T1 and D1 and every several times in subgroups Ts and Ds.The adenosine triphosphate(ATP)level and residual proteins were measured three times:Before and after precleaning and after manual cleaning.RESULTS After precleaning,the precleaning kit significantly reduced the ATP levels(P=0.034)and has a more stable ATP clearance rate than the traditional precleaning bucket.The precleaning kit also saved a quarter of the cost of enzymatic detergent used during the precleaning process.After manual cleaning,the ATP levels were also significantly lower in the precleaning kit group than in the traditional precleaning bucket group(P<0.05).Meanwhile,the number of uses of the cleaning solution(up to four times)has no significant impact on the cleaning effect(P>0.05).CONCLUSION Considering its economic cost and cleaning effect,the use of a disposable endoscope bedside precleaning kit can be an optimal option in the precleaning stage with the cleaning solution being replaced several times in the manual cleaning stage.

Effects of Househould Cleaning Methods on Carbendazim Residue in Apples

Carbendazim,belonging to fungicides,was commonly used for controlling crop diseases,resulting in frequent residues in fruits and vegetables.Washing was the initial step of household fruit processing for cleaning and reducing pollutant contents.However,the effect of washing on the removal of carbendazim in apples was not systemically studied.Thus,in this study,an analytical method was firstly established for the determination of carbendazim with great accuracy and precision through quick,simple,cheap,effective and safe(QuEChERS)method and ultra-performance liquid chromatography-fluorescence detection(UPLC-FLD).Then,the influencing factors were systematically researched to unveil their effects on the carbendazim residue in apples.The results indicated that water temperature,washing products and washing method could obviously affect the carbendazim content in apples.In addition,the best cleaning scheme for removal of carbendazim was soaking apples for 5 min in a cleaning solution,which was prepared by dissolving 8 g of commercial fruit washing soup with 500 ml of water at 45℃.Under this condition,the removal rate of carbendazim in the washing step reached 73.91%.This study will be helpful for providing guidance for household cleaning methods for controlling pesticide residues.

New steelmaking process based on clean deoxidation technology

After the converter steelmaking process,a considerable number of ferroalloys are needed to remove dissolved oxygen from the molten steel,but it also forms a lot of oxide inclusions that cannot be completely removed.At the same time,it increases the carbon emis-sions in the steel production process.After years of research,our team have developed a series of clean deoxidation technologies,includ-ing carbon deoxidation,hydrogen deoxidation,and waste plastic deoxidation of molten steel to address the aforementioned issues.In this study,thermodynamic calculations and laboratory experiments were employed to verify that carbon and hydrogen can reduce the total oxygen content in the molten steel melt to below 5×10^(-6) and 10×10^(-6),respectively.An analysis of the deoxidation mechanisms and ef-fects of polyethylene and polypropylene was also conducted.In addition,the applications of carbon deoxidation technology in different steels with the hot-state experiment and industrial production were discussed carefully.The carbon deoxidation experimental results of different steels were as follows:(1)the oxygen content of bearing steel was effectively controlled at 6.3×10^(-6) and the inclusion number density was lowered by 74.73%compared to aluminum deoxidized bearing steel;(2)the oxygen content in gear steel was reduced to 7.7×10^(-6) and a 54.49%reduction of inclusion number density was achieved with almost no inclusions larger than 5μm from the average level of industry gear steels;(3)a total oxygen content of M2 high-speed steel was as low as 3.7×10^(-6).In industrial production practice,car-bon deoxidation technique was applied in the final deoxidation stage for non-aluminum deoxidized bearing steel,and it yielded excellent results that the oxygen content was reduced to below 8×10^(-6) and the oxide inclusions in the steel mainly consist of silicates,along with small amounts of spinel and calcium aluminate.

Experimental investigation on coal pore-fracture variation and fractal characteristics synergistically affected by solvents for improving clean gas extraction

Chemical solvents instead of pure water being as hydraulic fracturing fluid could effectively increase permeability and improve clean methane extraction efficiency.However,pore-fracture variation features of lean coal synergistically affected by solvents have not been fully understood.Ultrasonic testing,nuclear magnetic resonance analysis,liquid phase mass spectrometry was adopted to comprehensively analyze pore-fracture change characteristics of lean coal treated by combined solvent(NMP and CS_(2)).Meanwhile,quantitative characterization of above changing properties was conducted using geometric fractal theory.Relationship model between permeability,fractal dimension and porosity were established.Results indicate that the end face fractures of coal are well developed after CS2and combined solvent treatments,of which,end face box-counting fractal dimensions range from 1.1227 to 1.4767.Maximum decreases in ultrasonic longitudinal wave velocity of coal affected by NMP,CS_(2)and combined solvent are 2.700%,20.521%,22.454%,respectively.Solvent treatments could lead to increasing amount of both mesopores and macropores.Decrease ratio of fractal dimension Dsis 0.259%–2.159%,while permeability increases ratio of NMR ranges from 0.1904 to 6.4486.Meanwhile,combined solvent could dissolve coal polar and non-polar small molecules and expand flow space.Results could provide reference for solvent selection and parameter optimization of permeability-enhancement technology.

Comparative Study of Structure and Property Changes in Corrosive Media for Self-cleaning Superhydrophobic Magnesium Alloys

Magnesium alloys with superhydrophobicity are constructed by controlling rough surface structure and grafting long hydrophobic alkyl chains. Changes of morphology, phase structure, chemical composition as well as wettability, corrosion resistance of superhydrophobic magnesium alloy upon immersing in corrosive media are investigated comparatively. Meanwhile, the contaminating particles on as-prepared superhydrophobic surfaces can be taken away easily by rolling water droplets. Therefore, the results show that as-prepared superhydrophobic magnesium alloys exhibit enhanced corrosion resistance and self-healing performance. Finally, anti-corrosion and self-cleaning mechanisms are deduced. It can be concluded that it is an effective strategy of preparing superhydrophobic surfaces for improving the corrosion resistance and selfcleaning performance of magnesium alloys.

满足DNV船级符号Clean(Design)要求的轮机设备订货及系统设计

为有效避免在船舶产品设计过程中出现疏漏,研究挪威船级社船级符号Clean(Design)对轮机设备订货、系统设计和舱柜布置的最新要求,并对各设备和系统的特殊要求及设计原则进行梳理和归纳。用于处理污染物的设备主要包括油水分离器、污水处理装置和焚烧炉,涉及的船舶系统主要包括舱底水系统、生活污水处理系统、泡沫灭火系统和艉管滑油系统等。该研究可供满足该规范要求的环保型船舶产品的设计参考。

Analysis of the Appealing Structure in Hemingway’s“A Clean,Well-lighted Place”

In the novel“A Clean,Well-lighted Place”,Hemingway tells the story of two waiters in a Spanish caféjust before closing time,talking about an old man who drank heavily in the caféevery night and lived a wealthy life but still wants to commit suicide.Using the iceberg principle,Hemingway purposely omits the plot,characterization of the story,and uses symbolism and repetition to describe people’s different attitudes facing the spiritual emptiness after the war,breaking the readers’expectations,and inspiring them to explore the meaning of individual life.Therefore,based on Wolfgang Iser and Zhu Liyuan’s appealing structure theory,this paper will analyze the appealing structure in“A Clean,Well-lighted Place”at three levels:meaning construction,rhetorical techniques,and thoughts and themes.It is hoped that readers can find a new way to interpret the short story,better understand the author’s creative ideas and dig deeper into the connotation of the work.

Self-cleaning glass coated with Fe^(3+)-TiO_2 thin film

The self-cleaning glass coated with Fe3+-TiO2 photocatalytic thin film was prepared by sol-gel process from the system Ti（OC4H9）4-NH（C2H4OH）2-C2H5OH-H2O containing FeCl3. The microstructure and properties of the film were studied using differential thermal analysis-thermogravimetry（DTA-TG）, X-ray diffration（XRD） and scanning electron microscope（SEM）. The transmittance of the self-cleaning glass was measured by using UV-Vis spectrometer. The effects of content of Fe3+ and the thickness of Fe3+-TiO2 thin film on the photocatalytic activity were examined. The results show that the photocatalytic thin films are mainly composed of Fe3O4 and TiO2 particles within 10100 nm. The appropriate amount of Fe3+ is effective for improving the photocatalytic activities of TiO2. The best photocatalytic activity is obtained when the molar ratio of Fe3+ to TiO2 is 0.005 and the glass is coated with 9 layers.

关于正则环和拟clean环的一个注记

如果对环R中的每个元素a,都存在u∈R使得aua=a,则称R为正则环.如果环R中的每个元素都可分解成一个拟幂等元与一个单位之和,则称R为拟clean环.该文构造了一个列有限矩阵环,说明正则环不一定是拟clean的.

A Clean Switch Inner Mongolian town takes giant steps in transitioning to clean energy production

Staff at the Ruichen Wanniu Livestock Farm in Jungar Zhao Town,Jungar Banner,Inner Mongolia,are consistently busy,even during important festivals.