From Chooz to the Ling'ao NPP:The Technology Transfer of Pressurized Water Reactor Technology from France to China

The transfer of pressurized water reactor(PWR)technology from France to China is an important event in the history of Sino-French scientific and technological relations.China has gradually achieved self-reliance in the field of PWR technology through the introduction and subsequent absorption of France's 900 MW reactors.Compared with the process of introducing and absorbing similar technology from the United States by France,China's experience has been more complicated.This circumstance reflects the differences in the nuclear power technology systems between the two countries.France's industrial strength and early acquisition of nuclear power technology laid a solid foundation for mastering PWR technology.On the other hand,although China established a weak foundation through the implementation of the"728 Project,"and tried hard to negotiate with France,the substantive content of the technology transfer was very limited.By way of the policy transition from"unhooking of technology and trade"to"integration of technology and trade,"China ultimately accomplished the absorption and innovation of PWR technology through the Ling'ao NPP.

Application Strategies of Virtual Reality Technology in the Teaching Design of Vocational Courses from the Perspective of Learning Transfer Theory

With the rapid development of virtual reality technology,it has been widely used in the field of education.It can promote the development of learning transfer,which is an effective method for learners to learn effectively.Therefore,this paper describes how to use virtual reality technology to achieve learning transfer in order to achieve teaching goals and improve learning efficiency.

An integrated technology for the absorption and utilization of CO_(2)in alkanolamine solution for the preparation of BaCO_(3)in a high-gravity environment

In this study,an integrated technology is proposed for the absorption and utilization of CO_(2)in alkanolamine solution for the preparation of BaCO_(3)in a high-gravity environment.The effects of absorbent type,high-gravity factor,gas/liquid ratio,and initial BaCl2concentration on the absorption rate and amount of CO_(2)and the preparation of BaCO_(3)are investigated.The results reveal that the absorption rate and amount of CO_(2)follow the order of ethyl alkanolamine(MEA)>diethanol amine(DEA)>N-methyldiethanolamine(MDEA),and thus MEA is the most effective absorbent for CO_(2)absorption.The absorption rate and amount of CO_(2)under high gravity are higher than that under normal gravity.Notably,the absorption rate at 75 min under high gravity is approximately 2 times that under normal gravity.This is because the centrifugal force resulting from the high-speed rotation of the packing can greatly increase gas-liquid mass transfer and micromixing.The particle size of BaCO_(3)prepared in the rotating packed bed is in the range of 57.2—89 nm,which is much smaller than that prepared in the bubbling reactor(>100.3 nm),and it also has higher purity(99.6%)and larger specific surface area(14.119 m^(2)·g^(-1)).It is concluded that the high-gravity technology has the potential to increase the absorption and utilization of CO_(2)in alkanolamine solution for the preparation of BaCO_(3).This study provides new insights into carbon emissions reduction and carbon utilization.

Transforming Molecules into Medicines: Role of CDMOS in Phase-Appropriate Technology Transfers in Advancing Pharmaceutical Innovation

CDMOs are emerging as critical drivers of innovation within the pharmaceutical and biotech industries. As the pharmaceutical industry continues to evolve, we can expect to see CDMOs play an increasingly important role in drug development and manufacturing. Many companies within these sectors are now leveraging the expertise of CDMOs through technology transfers to foster innovation and enhance the development of new drug products. In the extensive field of drug development, technology transfer plays a crucial role at multiple stages, ranging from preclinical phases to commercialization. By working closely with drug developers, CDMOs can ensure that technologies are transferred seamlessly between phases of drug development, allowing for a more efficient and cost-effective development process. CDMOs also bring a wealth of experience in various areas of drug development, including process development, analytical testing, quality control, and manufacturing. This expertise, combined with a focus on innovation, can help drug developers to overcome technical challenges and optimize their drug development programs. CDMOs can provide drug developers with various manufacturing capabilities, from small-scale clinical trials to large-scale commercial production. This flexibility allows drug developers to focus on their core competencies while relying on CDMOs to provide the necessary infrastructure and support for drug manufacturing. The critical role of CDMOs in advancing pharmaceutical innovation in phase-appropriate technology transfer where there will be a lot of effort and patience with strong technical expertise is required. This article explores the various types of Technology transfer from preclinical to commercial stages and successful strategies to foster innovation.

Progress and Knowledge Transfer from Science to Technology in the Research Frontier of CRISPR Based on the LDA Model

Purpose:This study explores the underlying research topics regarding CRISPR based on the LDA model and figures out trends in knowledge transfer from science to technology in this area over the latest 10 years.Design/methodology/approach:We collected publications on CRISPR between 2011 and2020 from the Web of Science,and traced all the patents citing them from lens.org.15,904 articles and 18,985 patents in total are downloaded and analyzed.The LDA model was applied to identify underlying research topics in related research.In addition,some indicators were introduced to measure the knowledge transfer from research topics of scientific publications to IPC-4 classes of patents.Findings:The emerging research topics on CRISPR were identified and their evolution over time displayed.Furthermore,a big picture of knowledge transition from research topics to technological classes of patents was presented.We found that for all topics on CRISPR,the average first transition year,the ratio of articles cited by patents,the NPR transition rate are respectively 1.08,15.57%,and 1.19,extremely shorter and more intensive than those of general fields.Moreover,the transition patterns are different among research topics.Research limitations:Our research is limited to publications retrieved from the Web of Science and their citing patents indexed in lens.org.A limitation inherent with LDA analysis is in the manual interpretation and labeling of"topics".Practical implications:Our study provides good references for policy-makers on allocating scientific resources and regulating financial budgets to face challenges related to the transformative technology of CRISPR.Originality/value:The LDA model here is applied to topic identification in the area of transformative researches for the first time,as exemplified on CRISPR.Additionally,the dataset of all citing patents in this area helps to provide a full picture to detect the knowledge transition between S&T.

A Historical Approach on the Opportunity to Acquire Technology Development Capability in Turkish Automobile Industry

Turkey has given importance to the development of the automobile industry since the Ottoman period.While the Ottomans,who were aware of the development process of the automobile industry in the world,provided transportation by horse-drawn carriage,they thought of importing automobiles for the Sultan and high-level bureaucrats in an effort to switch to automobile transportation.However,after the proclamation of the Republic,automobile production started,just like airplanes.While a factory was established for the production of a domestic aircraft,the first automobile production facility was established in Istanbul in 1929 by the American Ford company.This factory was closed after a short time due to the world economic crisis.After the activities of the Kayseri Aircraft Factory,which lasted until 1948,came to an end,this time,Revolution car prototypes could be manufactured completely domestically in 1961.After the project,which did not go into mass production,the KoçGroup started to produce the domestically-made Anadol car with technology transfer from multiple sources in 1967,but the production of Anadol continued until 1984.In 1971,Renault cars started to be produced under the French Renault license,and TOFAŞcars under the Italian FIAT license.Towards the end of the 1970s,creative imitation applications were made in TOFAŞcars with the bird series.In the 1990s,the production of Japanese Honda and Toyota and South Korean Hyundai cars started.In 2011,the idea of producing a domestic automobile emerged,the Devrim automobile was taken as an example in this project,the first Togg prototype was manufactured with technology transfer from multiple sources in December 2018,and it was announced that mass production would begin in March 2023.The 12-year period from 2011 to 2023 is too long for the creation of a domestic automobile.It has been understood that this long process has been passed in order to regain the pre-1980 level of technological ability.However,the most important thing is the transition from the creative imitation stage to the innovation stage.Our wish is that this process can be shortened with phase skipping approaches.

Is China’s Foreign Investment Policy to Blame for US-China “Forced Technology Transfer” and Trade Conf lict?——Comment on Trump Administration’s Section 301 Investigation of China

The paper presents a new analytical framework to discuss the effect of Chinese foreign investment policy on the international technology transfer absorbed by enterprises of different ownership.The US Trade Representative claims that the Chinese government’s requirements regarding joint ventures pressure US companies to transfer intellectual property to Chinese companies.However,we argue that:(1)Based on analysis of the technical fees of technology import contracts and the number of US patents transferred to enterprises registered in the Chinese mainland,China’s foreign investment policy does not pressure US companies to transfer unremunerated technology to Chinese companies.(2)The invention and utility model patents filed by Chinese joint-venture enterprises or Chinese partner companies do not show an abnormally rapid growth,which means China’s FDI policy does not force US companies to transfer intellectual property in exchange for China’s market.(3)After 2012,the US-China technology transfer absorbed by enterprises of different ownership showed a significantly positive effect in reducing China-US trade surplus.

The Route of V-2 Technology Transfer from Germany to the USSR,and on to China

V-2 technology was transferred from Germany to the Union of Soviet Socialist Republics(USSR)and then on to China.The USSR imitated the captured German V-2 rocket,and independently developed the R-2.Later,China imitated the R-2 rocket provided by the USSR,and independently developed the Dong Feng-2(DF-2).The imitation or localization of foreign products is a key stage prior to independent development.Independent development of new models,in turn,is not only indicative of an upgrading of the transferred technology and the mastering of foreign technology,but also an illustration of innovation.Talent is the crucial resource on which technology transfer relies.The administrative system and domestic collaboration network required to coordinate the necessary tasks,including research,experimentation,design,and manufacture were established both in the USSR and in China.

Factors Influencing Technology Transfer for Sustainable Construction Management in Nigeria

The move to embrace sustainable building is an international paradigm with the desire for sustainable development in society. Developing countries, however, are the most susceptible regions to unsustainable development. This study focused on factors influencing Technology Transfer in Construction Management in Nigeria. Questionnaires were applied to collect primary data. A total of 55 registered architectures, quantity surveyors and engineers were interviewed. The data were analyzed and both descriptive and inferential statistics were applied in the study. The findings show that research on sustainability and involvement of stakeholders influence the success of technology transfer. These findings have managerial implications on technology transfer to attain sustained development in the construction industry for many developing countries.

Intellectual Property Management in Technology Transfer among Companies

Intellectual property management plays a very important role in the process of technology transformation among different companies. This article discusses the main methods and mode which companies usually used to manage their IPM in market. Some suggestions are also provided for the company managers.

Transfer of European Clock-Making Technology into China during the Seventeenth and Eighteenth Centuries

From the 1580s onwards,Catholic missionaries introduced European mechanical clocks into China as gifts for officials or emperors,with the aim of establishing a good relationship with the Chinese leadership in order to do missionary work.After the seventeenth century,European clock-makers in the imperial palace made complicated clocks according to the emperors’desires.There were a number of workshops for producing European-style clocks in Guangzhou,Suzhou,Nanjing,and other cities during the eighteenth and nineteenth centuries.It was,however,difficult for the experienced craftsmen to innovate new clockwork.The main reasons for the development of European clock technology in China were its technical superiority,the missionaries’introduction,and the Chinese interest in clocks.

Research on Chinese agricultural technology transfer to Vietnam under of the Belt and Road Initiative

Since the Belt and Road Initiative was put forward,the agricultural technology exchanges between China and Vietnam have become more and more frequent.With its unique geographical advantages,economic differences and technological complementarities,China is steadily advancing its agricultural technology transfer to Vietnam.This paper analyzes that the main driving force of Chinese agricultural technology transfer to Vietnam is the existence of technological potential difference.This paper puts forward corresponding countermeasures and suggestions from three aspects of government,agricultural enterprises and scientific research institutions.

Technology Transfer as the Process of Pharmaceutical Quality System： Modelling Technology Transfer as a Process Strategy

The recent GMP （good medical practice） rules actualisation and its requirements introduction widened the GMP guidelines for every life cycle of medicinal products, including the stage of processes scaling and technology transfer. This requires the technology transfer process to be regulated as the part of pharmaceutical quality system and the following development of corresponding written procedures. The following publication is dedicated to the development of TTP （technology transfer process） and its accessible graphic formalisation alongside the definition of main stages and possible procedures limited by the offered model. According to the actualized GMP rules, the technology transfer is an essential part of pharmaceutical quality system at a modem pharmaceutical company.

Technology-Transfer Through International Network Formation： Revisiting the Role of Cultural Variation

This paper studies the factors affecting the technology-transfer within international research and development （R＆D） networks. Specifically, this study examines the characteristics of ties, actors, and international network configuration to assess finn＇s accessibility to unique technologies. This study was conducted by research analysis in the aerospace industry. The total sample size used in this study is 125 cases of international R＆D consortiums from January 1980 to December 2000. The result of this study supports the effects of ＂strength of tie＂ and ＂characteristic of actors＂ on the technology transfer explained by network theory. It also demonstrates that the international network structure that would facilitate the technology transfer is shaped by dual type of tie; the apparent type of tie is general, usual, and functional tie, and the hidden one is the national culture.

NEW POLICIES PROMOTE TECHNOLOGY TRANSFER

The Chinese government issued a regulation on promoting the transformation of R&D results recently. The new policies, which were jointly formulated by seven governmental departments, are aimed at further encouraging China’s scientists to commercialize their R&D results, set up new hi-tech business and speed up the process of China’s hi-tech industrialization.