A transceiver frequency conversion module based on 3D micropackaging technology

The idea of Ku-band transceiver frequency conversion module design based on 3D micropackaging technology is proposed. By using the double frequency conversion technology,the dual transceiver circuit from Ku-band to L-band is realized by combining with the local oscillator and the power control circuit to complete functions such as amplification, filtering and gain. In order to achieve the performance optimization and a high level of integration of the Ku-band monolithic microwave integrated circuits(MMIC) operating chip, the 3 D vertical interconnection micro-assembly technology is used. By stacking solder balls on the printed circuit board(PCB), the technology decreases the volume of the original transceiver to a miniaturized module. The module has a good electromagnetic compatibility through special structure designs. This module has the characteristics of miniaturization, low power consumption and high density, which is suitable for popularization in practical application.

Quantum frequency down-conversion of single photons at 1552 nm from single InAs quantum dot

Near-infrared single photon sources in telecommunication bands, especially at 1550 nm, are required for long-distance quantum communication. Here a down-conversion quantum interface is implemented, where the single photons emitted from single In As quantum dot at 864 nm is down converted to 1552 nm by using a fiber-coupled periodically poled lithium niobate（PPLN） waveguide and a 1.95 μmm pump laser, and the frequency conversion efficiency is ~40%. The singlephoton purity of quantum dot emission is preserved during the down-conversion process, i.e., g^（（2））（0）, only 0.22 at 1552 nm.This present technique advances the Ⅲ-Ⅴ semiconductor quantum dots as a promising platform for long-distance quantum communication.

Noise-free frequency conversion of quantum states

In this paper, the frequency conversion of quantum states based on the intracavity nonlinear interaction is proposed. The fidelity of an input state after frequency conversion is calculated, and it is shown the noise-free frequency conversion of a quantum state can be achieved by injecting a strong signal field. The dependences of conversion efficiency on the pump parameter, extra losses and input state amplitude are also analysed.

Quantum frequency up-conversion with a cavity

The quantum state transfer from subharmonic frequency to harmonic frequency based on asymmetrically pumped second harmonic generation in a cavity is investigated theoretically. The performance of noise-free frequency up- conversion is evaluated by the signal transfer coefficient and the conversion efficiency, in which both the quadrature fluctuation and the average photon number are taken into consideration. It is shown that the quantum property can be preserved during frequency up-conversion via operating the cavity far below the threshold. The dependences of the transfer coefficient and the conversion efficiency on pump parameter, analysing frequency, and cavity extra loss are also discussed.

Multiple frequency conversion via atomic spin coherence of storing a light pulse

We experimentally demonstrate multiple frequency conversion via atomic spin coherence of storing a light pulse in a doped solid. The essence of this multiple frequency conversion is four-wave mixing based on stored atomic spin coherence. Through electromagnetically induced transparency, an input probe pulse is stored into atomic spin coherence by modulating the intensity of the control field. By using two different control fields to interact with the coherently prepared medium, the stored atomic spin coherence can be transformed into three different information channels. Multiple frequency conversion is implemented efficiently by manipulating the spectra of the control fields to scatter atomic spin coherence. This multiple frequency conversion is expected to have potential applications in information processing and communication network.

Advanced Power Module Packaging and Integration Structures for High Frequency Power Conversion：From Silicon to GaN

The emerging of commercial high-voltage gallium nitride(GaN) power devices provides extraordinary switching performance over silicone devices, which enables high-voltage power conversion switching at megahertz range.Such outstanding features also pose strong challenges for device packaging design since the package parasitics can significantly influence the device switching characteristics, and thus can shadow the advantages brought by GaN devices. Designers have been dealing with these challenges brought by high du/dt and high-frequency switching operation even since the silicon(Si) era when fast switching Si MOSFET is first developed and came up with lots of inspiring advanced power module packaging structures to mitigate the problems.This paper presents a review of advanced power module packaging and integration structures that are suitable for high frequency power conversion.The review covers the heritage from the high frequency Si MOSFET packaging to the state-of-the-art for GaN devices.

Decoupled estimation of frequency-dependent IQI and channel for OFDM systems with direct-conversion transceivers

The in-phase and quadrature-phase imbalance (IQI) is one of the major radio frequency impairments existing in orthogonal frequency division multiplexing (OFDM) systems with direct-conversion transceivers. During the transmission of the communication signal, the impact of IQI is coupled with channel impulse responses (CIR), which makes the traditional channel estimation schemes ineffective. A decoupled estimation scheme is proposed to separately estimate the frequency-dependent IQI and wireless channel. Firstly, the generalized channel model is built to separate the parameters of IQI and wireless channel. Then an iterative estimation scheme of frequency-dependent IQI is designed at the initial stage of communication. Finally, based on the estimation result of IQI, the least square algorithm is utilized to estimate the channel-related parameters at each time of channel variation. Compared with the joint estimation schemes of IQI and channel, the proposed decoupled estimation scheme requires much lower training overhead at each time of channel variation. Simulation results demonstrate the good estimation performance of the proposed scheme.

Frequency Up-conversion Luminescence Properties and Mechanism of Tm^(3+) /Er^(3+)/Yb^(3+) Co-doped Oxyfluorogermanate Glasses

Oxyfluoride glasses were developed with composition 60GeO 2 ·10AlF 3 ·25BaF 2 ·（1.95-x）GdF 3 · 3YbF 3 ·0.05TmF 3 ·xErF 3 （x=0.02,0.05,0.08,0.11,0.14,0.17）in mole percent.Intense blue（476 nm）,green（524 and 546 nm）and red（658 nm）emissions which identified from the 1G 4 →3H 6 transition of Tm3＋and the（2H 11/2 ,4S 3/2 ）→4I 15/2 ,4F 9/2 →4I 15/2 transitions of Er3＋,respectively,were simultaneously observed under 980 nm excitation at room temperature.The results show that multicolor luminescence including white light can be adjustably tuned by changing doping concentrations of Er3＋ion or the excitation power.In addition,the energy transfer processes among Tm3＋,Er3＋and Yb3＋ions,and up-conversion mechanisms are discussed.

Nonreciprocal Single Photon Frequency Conversion via Chiral Coupling between a V-Type System and a Pair of Waveguides

The single photon frequency conversion is investigated theoretically in the system composed of a V-type system chiral coupling to a pair of waveguides. The single photon scattering amplitudes are obtained using the real-space Hamiltonian. The calculated results show that the probability of single photon frequency down-or up-conversion can reach a unit by choosing appropriate parameters in the non-dissipative system with perfect chiral coupling.We present a nonreciprocal single photon beam splitter whose frequency of the output photon is different from that of the input photon. The influences of dissipations and non-perfect chiral coupling on the single frequency conversion are also shown. Our results may be useful in designing quantum devices at the single-photon level.

Scheme for implementing frequency up-conversion between two collective atomic modes

This paper presents a scheme for realizing the frequency up-conversion between two collective atomic modes. In the scheme two atomic samples are coupled to a cavity mode. Under the large detuning condition, the two collective atomic modes are coupled via the virtual excitation of the cavity mode and the effective Hamiltonian corresponds to the frequency up-conversion. In the scheme the cavity mode is only virtually excited and thus the process is insensitive to cavity decay.

Conversion of Kinetic Energy from Synoptic Scale Disturbance to Low-Frequency Fluctuation over the Yangtze River Valley in the Summers of 1997 and 1999

以便从摘要的规模骚乱调查动能的变换(SSD；时期≤ s 甚至天) 到一个低频率的变化(LFF；时期 < 七天) ， LFF 动能的预算方程被导出。精力变换当时为 1997 和 1999 的夏天计算、分析。结果证明到 LFF 的从 SSD 的精力变换显然在重降雨期间在中间和更低的对流层被提高，建议这是导致重降雨的机制之一，尽管本地 LFF 动能不能被提高。

Control of Virtual Synchronous Generator for Frequency Regulation Using a Coordinated Self-adaptive Method

Power inverter adopting virtual synchronous generator(VSG)control can provide inertia support for distributed generation systems.However,it cannot take into account the dynamic regulation characteristics of frequency.Thus,when the system encounters a sudden change in load or disturbance,the dynamic process of frequency regulation will be greatly influenced.In view of this issue,an improved VSG control strategy based on a coordinated self-adaptive(CSA)method is proposed.The time domain analysis method is used to study the influences of virtual inertia and damping parameter perturbation on the system steady and dynamic performances.Furthermore,in order to make the control strategy suitable for large load changes and suppress frequency variations beyond the limit,the secondary frequency modulation is introduced into the control loop.Through the coordinated adaptive control of virtual inertia,virtual damping and frequency modulation,the dynamic performance of vSG frequency regulation can be obviously improved.Simulation and experiment results have verified the effectiveness of the proposed CSA control strategy.

dispersion grating;frequency modulation-to-amplitude modulation conversion;high-power laser facility;inertial confinement fusion;phase modulation

Frequency modulation(FM)-to-amplitude modulation(AM) conversion is an important factor that affects the time±power curve of inertial confinement fusion(ICF) high-power laser facilities. This conversion can impact uniform compression and increase the risk of damage to optics. However, the dispersive grating used in the smoothing by spectral dispersion technology will introduce a temporal delay and can spatially smooth the target. The combined effect of the dispersive grating and the focusing lens is equivalent to a Gaussian low-pass filter, which is equivalent to 8 GHz bandwidth and can reduce the intensity modulation on the target to below 5% with 0.3 nm @ 3 GHz + 20 GHz spectrum phase modulation. The results play an important role in the testing and evaluating of the FM-to-AM on the final optics and the target, which is beneficial for comprehensively evaluating the load capacity of the facility and isentropic compression experiment for ICF.

Frequency detection of self-adaption control based on chaotic theory

Low-order Duffing and high-order Rossler chaotic oscillator are connected together and new self-adaption frequency detection method is presented. The frequency difference control between unknown signal and the periodic driving force is realized in this paper and the self-adaption is obtained. Thus, the detection precision and speed are promoted. The limitation that there are too many chaotic oscillators in Duffing system is broken. Meanwhile the disadvantage that the detection speed is lower in R ssler chaotic control is overcome. The self-adaption choice of frequency difference control is realized using the Duffing and Rssler different chaotic oscillators to obtain unknown signal frequency. The simulation results show that the presented method is feasible and effective.

Efficient collinear frequency tripling of femtosecond laser with compensation of group velocity delay

This paper demonstrates an approach that negative uniaxial crystal has a relative anomalous dispersion effect which can compensate group velocity delay, and applies this approach to nonlinear frequency conversion of an ultrafast laser field. High efficiency of the third harmonic generation is experimentally fulfilled by adopting a collinear configuration of doubing-compensation-tripling system. Through finely adjusting the incident angle and optical axis direction of the compensation plate, it obtains ultraviolet （UV） output energy of 0.32 mJ centered at 270 nm with spectral bandwidth of 2 nm when input beam at 800 nm was 70 fs pulse duration and 6 mJ pulse energy which was extracted from Ti：sapphire laser system by a diaphragm, corresponding to an 800-to-270 nm conversion efficiency of 5.3% and a factor-of-l.6 improvement in the third harmonic generation of UV band in comparison with a general conventional configuration. Furthermore, when the full energy of 18 mJ from a Ti：sapphire laser system was used and optimized, the UV emission could reach 0.83 mJ.

Analytic approach to the small-signal frequency response of saturated semiconductor optical amplifiers using multisection model

An analytic solution derived by multisection model to the small-signal frequency response （SSFR） of wavelength conversion based on cross-gain modulation （XGM） in semiconductor optical amplifiers （SOAs） is presented. The result contains details that can affect the characteristics of SSFR significantly more than previous ones.

Quantum frequency doubling based on tripartite entanglement with cavities

We analyze the entanglement characteristics of three harmonic modes, which are the output fields from three cav- ities with an input tripartite entangled state at fundamental frequency. The entanglement properties of the input beams can be maintained after their frequencies have been up-converted by the process of second harmonic generation. We have calculated the parametric dependences of the correlation spectrum on the initial squeezing factor, the pump power, the trans- naission coefficient, and the normalized analysis frequency of cavity. The numerical results provide references to choose proper experimental parameters for designing the experiment. The frequency conversion of the multipartite entangled state can also be applied to a quantum communication network.

Influence of laser linewidth on external-cavity frequency doubling efficiency of a 1.56 μm master oscillator fiber power amplifier

By using an external-cavity frequency-doubling master oscillator fiber power amplifier （MOPA）, a 700 mW continuous-wave single-frequency laser source at 780 nm is produced. It is shown that the frequency doubling efficiency is improved when the seed diode laser is optically locked to a resonant frequency of a confocal Fabry-Perot （F-P） cavity. This phenomenon can be attributed to the narrowing of the 1.56 μm laser linewidth and explained by our presented theoretical model. The experimental results are found to be in good agreement with the theoretical predictions.

Six-bit all-optical quantization using photonic crystal fiber with soliton self-frequency shift and pre-chirp spectral compression techniques

In this paper, we propose an optical quantization scheme for all-optical analog-to-digital conversion that facilitates photonics integration. A segment of 10-m photonic crystal fiber with a high nonlinear coefficient of 62.8 W-1/kin is utilized to realize large scale soliton self-frequency shift relevant to the power of the sampled optical signal. Furthermore, a 100-m dispersion-increasing fiber is used as the spectral compression module for further resolution enhancement. Simulation results show that 317-nm maximum wavelength shift is realized with 1550-nm initial wavelength and 6-bit quantization resolution is obtained with a subsequent spectral compression process.

Parametric Study of Low Frequency Broadband Rectilinear-to-Rotary Vibrational Energy Harvesting

A parametric study of a high-power-density dual resonator for achieving low frequency broadband electromagnetic energy harvesting is reported.The dual resonator consists of a rectilinear oscillator(R_LO)performing magnetic levitation and a rotary oscillator(R_TO)performing electromagnetic coupling through a stator and a rotor.Both oscillators,coupled by magnetic forces generated by a set of arc permanent magnets,radially magnetized and centro-symmetrically fixed onto the R_LO and the rotor of the R_TO achieve the reciprocating-to-rotary motion conversion and frequency up-conversion.Specifically,the dual resonator is able to convert stochastic reciprocating motion into controllable rotation,provide intrinsic frequency up-conversion,use non-contact magnetic coupling to provide near loss-free energy transfer and be configured into specific applications to obtain and maintain high-energy orbits of multi-stable energy harvesting.While solely focusing on developing a dual resonator provides substantial benefits,its dynamic behavior is unclear,thus electromagnetic-dynamic governing equations are derived,and a curve fitting model of restoring torque of R_TO under different repulsive magnets configurations are developed to predict key characteristics and to improve performance of the electromechanical system.Power analysis is carried out for providing aquantitative guidance of customizing the harvester to achieve an optimal power density.