Effects of cross-Kerr coupling on transmission spectrum of double-cavity optomechanical system

We theoretically study the transmission spectrum of the cavity field in a double-cavity optomechanical system with cross-Kerr(CK) effect. The system consists of two tunneling coupling optomechanical cavities with a mechanical resonator as a coupling interface. By doping CK medium into the mechanical resonator, CK couplings between the cavity fields and the mechanical resonator are introduced. We investigate the effects of CK coupling strength on the transmission spectrum of the cavity field, including the transmission rate, nonreciprocity and four-wave mixing(FWM). We find that the transmission spectrum of the probe field can show two obvious transparent windows, which can be widened by increasing the CK coupling strength. For the transmission between the two cavity fields, the perfect nonreciprocity and reciprocity are present and modulated by CK coupling and phase difference between two effective optomechanical couplings. In addition, the effects of the optomechanical and CK couplings on FWM show that the single peak of FWM is split into three symmetrical peaks due to the introduction of the CK effect.

Enhanced Data Transmission Rate of XCTD Profiler Based on OFDM

An expendable conductivity-temperature-depth profiler(XCTD)is one of the most important instruments used to obtain hydrological data,such as temperature and conductivity,and detect ocean depth in a large area.However,the XCTD channel provides poor time-varying performance,narrowband,and low signal-to-noise ratio(SNR),which severely restricts the data transmission rate.In contrast to conventional single-carrier modulation techniques,such as amplitude-shift keying and differential phase-shift keying,this article provides a new method,based on orthogonal frequency division multiplexing(OFDM)to enhance the data transmission rate of deep-sea abandoned profilers.We apply the OFDM to enhance the SNR of the XCTD,which is achieved by reducing the data transmission rate of each sub-channel.Moreover,the bandwidth utilization may be improved by increasing the number of subcarriers in a given bandwidth,which enhances the data transmission rate.Based on analysis of the XCTD channel model,OFDM with different parameters such as constellation mapping,number of subcarriers,subcarrier spacing,signal period and cyclic prefix are achieved.To verify the effectiveness of the OFDM,this study investigates the influence of different parameters on the data transmission rate at different noise levels,i.e.,-20 dB and-40 d B.

A new method for improving the inductively coupled data transmission rate of mooring buoy based on carrier signal frequency selection

In the inductively coupled data transmission system of the mooring buoy, the carrier signal frequency of the transmission channel is limited due to the inherent characteristics of the system, resulting in limited channel bandwidth. The limited channel bandwidth limits the increase in inductively coupled data transmission rate.In order to improve the inductively coupled data transmission rate of mooring buoy as much as possible without damaging the data transmission performance, a new method was proposed in this paper. The method is proposed to improve the data transmission rate by selecting the appropriate carrier signal frequencies based on the principle of maximizing the amplitude value of amplitude-frequency characteristic curve of the system. Research has been done according to this method as follows. Firstly, according to the inductively coupled transmission mooring buoy structure, the inductively coupled data transmission circuit model was established. The binary frequency shift keying(2FSK) digital signal modulation mode was selected. Through theoretical analysis, the relation between the carrier signal frequency and the data transmission performance, the relation between the carrier signal frequency and the 2FSK signal bandwidth were obtained. Secondly, the performance and the bandwidth of the signal transmission were studied for the inherent characteristics of the actual inductively coupled data transmission system. The amplitude-frequency characteristic of the system was analyzed by experiments. By selecting the appropriate carrier signal frequency parameters, an excellent data transmission performance was guaranteed and a large 2FSK signal bandwidth was obtained. Finally, an inductively coupled data transmission rate optimization experiment and a bit error rate analysis experiment were designed and carried out. The results show that the high-speed and reliable data transmission of the system was realized and the rate can reach 100 kbps.

Global Dynamics Analysis of a Cholera Transmission Model with General Incidence and Multiple Modes of Infection

This paper develops an SIBR cholera transmission model with general incidence rate. Necessary and sufficient conditions for local and global asymptotic stability of the equilibria are established by Routh Hurwitz criterium, Lyapunov function, and the second additive composite matrix theorem. What is more, exploiting the DED is cover simulation tool, the parameter values of the model are estimated with the 1998-2021 cholera case data in China. Finally, we perform sensitivity analysis for the basic reproduction number to seek for effective interventions for cholera control. .

Joint Optimization Strategy for Video Transmission over Distributed Cognitive Radio Networks

A novel joint optimization strategy for the secondary user( SU) was proposed to consider the short-term and long-term video transmissions over distributed cognitive radio networks( DCRNs).Since the long-term video transmission consisted of a series of shortterm transmissions, the optimization problem in the video transmission was a composite optimization process. Firstly,considering some factors like primary user's( PU's) collision limitations,non-synchronization between SU and PU,and SU's limited buffer size, the short-term optimization problem was formulated as a mixed integer non-linear program( MINLP) to minimize the block probability of video packets. Secondly,combining the minimum packet block probability obtained in shortterm optimization and SU's constraint on hardware complexity,the partially observable Markov decision process( POMDP) framework was proposed to learn PU's statistic information over DCRNs.Moreover,based on the proposed framework,joint optimization strategy was designed to obtain the minimum packet loss rate in long-term video transmission. Numerical simulation results were provided to demonstrate validity of our strategies.

An Estimation of Achievable Rate for Digital Transmissions over MIMO Channels

Achievable rate (AR) is significant to communications. As to multi-input multi-output (MIMO) digital transmissions with finite alphabets inputs, which greatly improve the performance of communications, it seems rather difficult to calculate accurate AR. Here we propose an estimation of con-siderable accuracy and low complexity, based on Euclidean measure matrix for given channel states and constellations. The main contribution is explicit expression, non-constraints to MIMO schemes and channel states and constellations, and controllable estimating gap. Numerical results show that the proposition is able to achieve enough accurate AR computation. In addition the estimating gap given by theoretical deduction is well agreed.

Performance Evaluation of Flows with Diverse Traffic and Transmission Rates in IEEE 802.11 WLAN

IEEE 802.11 WLAN cannot guarantee the QoS of applications, thus admission control has been proposed as an essen-tial solution to enhance the QoS. Packet delay and throughput are commonly employed as assessment criterions to determine whether a new connection can be admitted into the WLAN. Considering the real network condition, the analytical model is presented in this paper, which is aimed to evaluate the packet delay and throughput performance of IEEE 802.11 WLAN in nonsaturated conditions, taking into account diverse transmission rates and diverse traffic flows (i.e. flows with different packet sizes and arrival rates) simultaneously. This model is based on Markov chain and the theoretical predictions are verified by simulation in OPNET 14.5. We also analyze the influences of transmission rate diversity and traffic flow diversity on throughput performance. It is observed that, the presence of even one station with lower transmission rate can cause a considerable degradation in throughput performance of all the stations when they have the same packet size and arrival rate. Higher system throughput can be achieved if lower transmission rate stations transmit packets with smaller size or arrival rate.

Influence of RMB exchange rate fluctuation on urban-rural income from the perspective of transmission asymmetry

Based on time series data of RMB exchange rate and urban-rural income, this paper makes an empirical study for the influence of RMB exchange rate fluctuation on urban-rural income by utilizing rolling regression model through direct and indirect transmission mechanisms. According to the results, the transmission effect of RMB exchange rate fluctuation on urban-rural income has features of incompleteness and asymmetry. Moreover, RMB appreciation will help to reduce the urban-rural income gap. Therefore, this paper suggests that the Chinese economy should accelerate the course of transforming mode, adjusting structure and promoting development under the new normal. Meanwhile, reform of RMB exchange rate mechanism should be promoted, living standard of residents must be improved, and the urban-rural income gap should be reduced.

A NOVEL CROSS-LAYER STRATEGY OF VIDEO TRANSMISSION TO SOLVE PERFORMANCE ANOMALY IN MULTI-RATE IEEE 802.11 NETWORKS

When wireless hosts use different rates to transmit data in IEEE 802.11 networks, it will take on the state of performance anomaly which will severely decrease the throughputs of all the higher rate hosts. Hence, it is bad for video service transmission. Considering that video is very sensitive to packet delivery delay but can tolerate some packet losses, we propose a novel cross-layer scheme which takes these two characteristics into consideration. Firstly, the maximum number of retransmissions for a video Medium Access Control (MAC) frame is computed in MAC layer according to video frame rate requirement of application layer and current access delay of MAC layer. Secondly, within the margin of the tolerant Packet Loss Rate (PLR) of application layer, several video MAC frames are allowed to drop so that we can adaptively select the transmission rate as high as possible for the rest of video MAC frames in terms of current channel quality and the maximum number of retransmissions. Experiment results show that the proposed method can reduce the delay and jitter of video service and improve the throughputs of fast hosts. Therefore, it increases the quality of reconstructed video to a certain extent and relieves the performance anomaly of network effectively.

Rate-aware optimal transmission power analysis in wireless ad hoc networks

The problem of transmission power control in a rate-aware way is investigated to improve the through-put of wireless ad hoc network.The behavior of basic IEEE 802.11 DCF is approximated by the p-persis-tent CSMA through a Markov chain model.The throughput model takes hidden temainals,multi-hop flowand concurrent interference into account.Numerical results show that the optimal transmission power de-rived from this model could balance the tradeoff between spatial reuse and data rate and hence yield maxi-mum throughput.

Rotational Swashplate Pulse Continuously Variable Transmission Based on Helical Gear Axial Meshing Transmission

The current research on pulse continuously variable transmission（CVT） is mainly focused on reducing the pulse degree and making pulse degrees a constant value. Current research mainly confined to find out new design parameters by using the method of optimization, and reduce the pulse degree of pulse CVT and its range of variation. But the fact is that the reduction of the pulse degree is not significant. This article presents a new structure of mechanical pulse CVT--the rotational swashplate pulse CVT with driven by helical gear axial meshing. This transmission is simple and compact in structure and low in pulsatile rate （it adopts 6 guide rods）, and the pulsatile degree is irrelevant to the transmission ratio. Theoretically, pulsatile rate could be reduced to zero if appropriate curved surface of the swashplate is used. Compared with the connecting rod pulse CVT, the present struc^tre uses helical gear mechanism as transmission part and it avoids unbalanced inertial force in the former model. This paper analyzes the principle of driving of this transmission, presents its mechanical structure, and discusses its motion characteristics. Experimental prototype of this type of CVT has been manufactured. Tests for the transmission efficiency（when the rotational speed of the output shaft is the maximum） and the angular velocity of the output shaft have been carried out, and data have been analyzed. The experimental results show that the speed of the output shaft for the experimental prototype is slightly lower than the theoretical value, and the transmission efficiency of the experimental prototype is about 70%. The pulse degree of the CVT discussed in this paper is less than the existing pulse CVT of other types, and it is irrelevant to the transmission ratio of the CVT. The research provides the new idea to the CVT study.

Studies on the Formation and Transmission of n + 1 Gametes of Cabbage Primary Trisomics

The transmission rate of n ＋ 1 gamete is an important parameter for the genetic analysis of trisomics. To correctly use the trisomics of the cabbage to carry out gene orientation and other genetic studies, the n ＋ 1 gamete transmission rates by female parent and by male parent were determined. The results showed that the n ＋ 1 gamete transmission rates were 15.28% for tri-1, 12.68% for tri-2, 12.31% for tri-3, 30.51% for tri-4, 22.81% for tri-5, 7.46% for tri-6, 5.36% for tri-7, 42.37% for tri-8, and 9.23% for tri-9 by female parent, and were 12.12% for tri-1, 12.33% for tri-2, 7.81% for tri-3, 4.76% for tri-4, 8.93% for tri-5, 10.94% for tri-6, 1.54% for tri-7, 2.94% for tri-8, and 13.04% for tri-9 by male parent. The main factors affecting the male n ＋ 1 gamete formation and transmission were the rate of trivalent formation at prophase Ⅰ, the rate of 9-9-10-10 division at anaphase Ⅱ, and the pollen viability.

Optimized analysis of sharpening characteristics of a compact RF pulse source based on a gyro-magnetic nonlinear transmission line for ultrawideband electromagnetic pulse application

We constructed a compact high-power RF pulse generator based on a gyro-magnetic nonlinear transmission line(GNLTL) to produce a high-voltage pulse with a sub-nanosecond rise time and a relatively high repetition rate, which shows great potential for application in the high-power ultrawideband electromagnetic effect, etc. The influence of incident pulse parameters(rise time and voltage amplitude) and line length on the sharpening characteristics of the GNLTL were investigated experimentally to optimize the rising rate of the modulated pulse front. Based on the GNLTL equivalent circuit model consisting of an LC ladder network, the rise time, the voltage conversion coefficient and the rising rate properties of a modulated pulse were also numerically analyzed in a wider range. The results show that a?>?90 k V RF pulse with a rise time of 350 ps and a repetition rate of 1 kHz in burst mode is produced by the GNLTL at an axial biasing magnetic field of 22 kA m^-1 and a line length of 30 cm under the condition of a 70 kV incident pulse. Applying a faster and higher incident pulse is conducive to improving the sharpening effect of the GNLTL. Furthermore, within a certain range, increasing the line length of the GNLTL not only reduces the rise time, but increases the voltage conversion coefficient and the rising rate of a modulated pulse. Furthermore, considering the energy loss of ferrite rings, there is an optimal line length to obtain the fastest rising rate of a modulated pulse front edge.

Assessment of SARS-CoV-2 airborne infection transmission risk in public buses

Public transport environments are thought to play a key role in the spread of SARS-CoV-2 worldwide.Indeed,high crowding indexes(i.e.high numbers of people relative to the vehicle size),inadequate clean air supply,and frequent extended exposure durations make transport environments potential hotspots for transmission of respiratory infections.During the COVID-19 pandemic,generic mitigation measures(e.g.physical distancing)have been applied without also considering the airborne transmission route.This is due to the lack of quantified data about airborne contagion risk in transport environments.In this study,we apply a novel combination of close proximity and room-scale risk assessment approaches for people sharing public transport environments to predict their contagion risk due to SARS-CoV-2 respiratory infection.In particular,the individual infection risk of susceptible subjects and the transmissibility of SARS-CoV-2(expressed through the reproduction number)are evaluated for two types of buses,differing in terms of exposure time and crowding index:urban and long-distance buses.Infection risk and reproduction number are calculated for different scenarios as a function of the ventilation rates(both measured and estimated according to standards),crowding indexes,and travel times.The results show that for urban buses,the close proximity contribution significantly affects the maximum occupancy to maintain a reproductive number of<1.In particular,full occupancy of the bus would be permitted only for an infected subject breathing,whereas for an infected subject speaking,masking would be required.For long-distance buses,full occupancy of the bus can be maintained only if specific mitigation solutions are simultaneously applied.For example,for an infected person speaking for 1 h,appropriate filtration of the recirculated air and simultaneous use of FFP2 masks would permit full occupancy of the bus for a period of almost 8 h.Otherwise,a high percentage of immunized persons(>80%)would be needed.

Reconstruction and transmission of astronomical image based on compressed sensing

In the process of image transmission, the famous JPEG and JPEG-2000 compression methods need more transmission time as it is difficult for them to compress the image with a low compression rate. Recently the compressed sensing（CS） theory was proposed, which has earned great concern as it can compress an image with a low compression rate, meanwhile the original image can be perfectly reconstructed from only a few compressed data. The CS theory is used to transmit the high resolution astronomical image and build the simulation environment where there is communication between the satellite and the Earth. Number experimental results show that the CS theory can effectively reduce the image transmission and reconstruction time. Even with a very low compression rate, it still can recover a higher quality astronomical image than JPEG and JPEG-2000 compression methods.

SER analysis and power allocation for hybrid cooperative transmission system

The symbol-error-rate（SER） and power allocation for hybrid cooperative（HC） transmission system are investigated.Closed-form SER expression is derived by using the moment generating function（MGF）-based approach.However,the resultant SER contains an MGF of the harmonic mean of two independent random variables（RVs）,which is not tractable in SER analysis.We present a simple MGF expression of the harmonic mean of two independent RVs which avoids the hypergeometric functions used commonly in previous studies.Using the simple MGF,closed-form SER for HC system with M-ary phase shift keying（M-PSK） signals is provided.Further,an approximation as well as an upper bound of the SER is presented.It is shown that the SER approximation is asymptotically tight.Based on the tight SER approximation,the power allocation of the HC system is investigated.It is shown that the optimal power allocation does not depend on the fading parameters of the source-destination（SD） channel and it only depends on the source-relay（SR） and relay-destination（RD） channels.Moreover,the performance gain of the power allocation depends on the ratio of the channel quality between RD and SR.With the increase of this ratio,more performance gain can be acquired.

An Anti-Eavesdrop Transmission Scheduling Scheme Based on Maximizing Secrecy Outage Probability in Ad Hoc Networks

In this paper,we consider a wireless ad hoc network consisting of multiple source nodes transmitting to their respective destinations,where an eavesdropper attempts to intercept their transmissions.We propose an optimal transmission scheduling scheme to defend against the eavesdropper,where a source node having the highest secrecy rate is scheduled to access the wireless medium for transmitting to its destination in an opportunistic manner.To be specific,the secrecy rate between a pair of the source and destination in the presence of an eavesdropper varies temporally due to the wireless fading effect.The proposed optimal transmission scheduling scheme opportunistically selects a source node with the highest secrecy rate to transmit its data for the sake of maximizing the security of the ad hoc network against eavesdropping attacks.For comparison purposes,we also consider the conventional round-robin scheduling as a benchmark,where multiple source nodes take turns in accessing their shared wireless medium for transmitting to their respective destinations.We derive closed-form secrecy outage probability expressions of both the round-robin scheduling and the proposed optimal scheduling schemes over Rayleigh fading environments.Numerical results show that the proposed transmission scheduling scheme outperforms the conventional round-robin method in terms of its secrecy outage probability.Additionally,upon increasing the number of source-destination pairs,the secrecy outage probability of the round-robin scheme keeps unchanged,whereas the secrecy outage performance of the proposed transmission scheduling significantly improves,showing the security benefits of exploiting transmission scheduling for protecting wireless ad hoc networks against eavesdropping.

An indoor air aerosol model for outdoor contaminant transmission into occupied rooms

The paper presents a simple model for outdoor air contaminant transmission into occupied rooms. In the model, several factors such as filtration, ventilation, deposition, re-emission, outdoor concentration and indoor sources are included. The model results show that the air exchange rate plays an important role in the transmission of outdoor contaminants into the indoor environment. The model shows that increasing the value of the filtration efficiency decreases the mass concentration of indoor particles. In addition, if outdoor aerosol particles have a periodic behaviour, indoor aerosol particles also behave periodically but smoother. Indoor sources are found to be able to increase indoor concentrations greatly and continuously.

Self-Adaptive Control System for Additive Manufacturing Using Double Electrode Micro Plasma Arc Welding

Wire arc additive manufacturing(WAAM)has been investigated to deposit large-scale metal parts due to its high deposition efficiency and low material cost.However,in the process of automatically manufacturing the high-quality metal parts by WAAM,several problems about the heat build-up,the deposit-path optimization,and the stability of the process parameters need to be well addressed.To overcome these issues,a new WAAM method based on the double electrode micro plasma arc welding(DE-MPAW)was designed.The circuit principles of different metal-transfer models in the DE-MPAW deposition process were analyzed theoretically.The effects between the parameters,wire feed rate and torch stand-off distance,in the process of WAAM were investigated experimentally.In addition,a real-time DE-MPAW control system was developed to optimize and stabilize the deposition process by self-adaptively changing the wire feed rate and torch stand-off distance.Finally,a series of tests were performed to evaluate the control system’s performance.The results show that the capability against interferences in the process of WAAM has been enhanced by this self-adaptive adjustment system.Further,the deposition paths about the metal part’s layer heights in WAAM are simplified.Finally,the appearance of the WAAM-deposited metal layers is also improved with the use of the control system.

Global stability for delay SIR epidemic model with vertical transmission

A SIR epidemic model with delay, saturated contact rate and vertical transmission is considered. The basic reproduction number is calculated. It is shown that this number characterizes the disease transmission dynamics: if, there only exists the disease-free equilibrium which is globally asymptotically stable;if, there is a unique endemic equilibrium and the disease persists, sufficient cond- itions are obtained for the global asymptotic stability of the endemic equilibrium.