Thick Electrodes of a Self-Assembled MXene Hydrogel Composite for High-Rate Energy Storage

Supercapacitors based on two-dimensional MXene(Ti_(3)C_(2)T_(z))have shown extraordinary performance in ultrathin electrodes with low mass loading,but usually there is a significant reduction in high-rate performance as the thickness increases,caused by increasing ion diffusion limitation.Further limitations include restacking of the nanosheets,which makes it challenging to realize the full potential of these electrode materials.Herein,we demonstrate the design of a vertically aligned MXene hydrogel composite,achieved by thermal-assisted self-assembled gelation,for high-rate energy storage.The highly interconnected MXene network in the hydrogel architecture provides very good electron transport properties,and its vertical ion channel structure facilitates rapid ion transport.The resulting hydrogel electrode show excellent performance in both aqueous and organic electrolytes with respect to high capacitance,stability,and high-rate capability for up to 300μm thick electrodes,which represents a significant step toward practical applications.

Research Progress of Zhuang Medicine Combined with Nanogels in Mastitis

Mastitis is a common and frequently-occurring disease among Chinese women, which seriously harms their mental and physical health. External application of Zhuang medicine has the effects of dredging collaterals, relieving pain, promoting blood circulation, removing blood stasis, and softening hardness to dissipate stagnation, and show definite curative effect in preventing and treating breast diseases. Nano-composite hydrogels have the advantages of small toxic and side effects, high bioavailability, high targeting and controllable drug release. Therefore, this paper summarized and analyzed relevant literature of Zhuang medicine in treating breast diseases and clinical research of nanogels, providing new ideas and scientific basis for the treatment of mastitis with Zhuang medicine combined with nanogels.

Role of self-assembled molecules’anchoring groups for surface defect passivation and dipole modulation in inverted perovskite solar cells

Inverted perovskite solar cells have gained prominence in industrial advancement due to their easy fabrication,low hysteresis effects,and high stability.Despite these advantages,their efficiency is currently limited by excessive defects and poor carrier transport at the perovskite-electrode interface,particularly at the buried interface between the perovskite and transparent conductive oxide(TCO).Recent efforts in the perovskite community have focused on designing novel self-assembled molecules(SAMs)to improve the quality of the buried interface.However,a notable gap remains in understanding the regulation of atomic-scale interfacial properties of SAMs between the perovskite and TCO interfaces.This understanding is crucial,particularly in terms of identifying chemically active anchoring groups.In this study,we used the star SAM([2-(9H-carbazol-9-yl)ethyl]phosphonic acid)as the base structure to investigate the defect passivation effects of eight common anchoring groups at the perovskite-TCO interface.Our findings indicate that the phosphonic and boric acid groups exhibit notable advantages.These groups fulfill three key criteria:they provide the greatest potential for defect passivation,exhibit stable adsorption with defects,and exert significant regulatory effects on interface dipoles.Ionized anchoring groups exhibit enhanced passivation capabilities for defect energy levels due to their superior Lewis base properties,which effectively neutralize local charges near defects.Among various defect types,iodine vacancies are the easiest to passivate,whereas iodine-substituted lead defects are the most challenging to passivate.Our study provides comprehensive theoretical insights and inspiration for the design of anchoring groups in SAMs,contributing to the ongoing development of more efficient inverted perovskite solar cells.

Factors resisting protein adsorption on hydrophilic/hydrophobic self-assembled monolayers terminated with hydrophilic hydroxyl groups

The hydroxyl-terminated self-assembled monolayer(OH-SAM),as a surface resistant to protein adsorption,exhibits substantial potential in applications such as ship navigation and medical implants,and the appropriate strategies for designing anti-fouling surfaces are crucial.Here,we employ molecular dynamics simulations and alchemical free energy calculations to systematically analyze the factors influencing resistance to protein adsorption on the SAMs terminated with single or double OH groups at three packing densities(∑=2.0 nm^(-2),4.5 nm^(-2),and 6.5 nm^(-2)),respectively.For the first time,we observed that the compactness and order of interfacial water enhance its physical barrier effect,subsequently enhancing the resistance of SAM to protein adsorption.Notably,the spatial hindrance effect of SAM leads to the embedding of protein into SAM,resulting in a lack of resistance of SAM towards protein.Furthermore,the number of hydroxyl groups per unit area of double OH-terminated SAM at ∑=6.5 nm^(-2) is approximately 2 to 3 times that of single OH-terminated SAM at ∑=6.5 nm^(-2) and 4.5 nm^(-2),consequently yielding a weaker resistance of double OH-terminated SAM towards protein.Meanwhile,due to the structure of SAM itself,i.e.,the formation of a nearly perfect ice-like hydrogen bond structure,the SAM exhibits the weakest resistance towards protein.This study will complement and improve the mechanism of OH-SAM resistance to protein adsorption,especially the traditional barrier effect of interfacial water.

Morphological Evolution of Self-Assembled Sodium Dodecyl Sulfate/Dodecyltrimethylammonium Bromide@Epoxy-β-Cyclodextrin Supramolecular Aggregates Induced by Temperature

Bio-based cyclodextrins(CDs)are a common research object in supramolecular chemistry.The special cavity structure of CDs can form supramolecular self-assemblies such as vesicles and microcrystals through weak interaction with guest molecules.The different forms of supramolecular self-assemblies can be transformed into each other under certain conditions.The regulation of supramolecular self-assembly is not only helpful to understand the self-assembly principle,but also beneficial to its application.In the present study,the self-assembly behavior of epoxy-β-cyclodextrin(EP-β-CD)and mixed anionic and cationic surfactant system(sodium dodecyl sulfate/dodecyltrimethylammonium bromide,SDS/DTAB)in aqueous solution was studied.Morphological and particle size characterization found that the SDS/DTAB@EP-β-CD complex,as the basic building unit,self-assembled into worm-like micelles at lower temperatures and vesicles at higher temperatures.Nuclear magnetic resonance(NMR)and Fourier transform infrared spectroscopy(FT-IR)analysis revealed that the driving force for the formation of vesicles and worm-like micelles was the hydrogen bonds between EP-β-CD molecules,while water molecules played an important role in promoting vesicle formation between SDS/DTAB@EP-β-CD units.Herein,the mechanism of the morphologic transformation of SDS/DTAB@EP-β-CD supramolecular aggregates induced by temperature was elucidated by exploring the self-assembly process,which may provide an excellent basis for the development of delivery carriers.

Intelligent responsive self-assembled micro-nanocapsules:Used to delay gel gelation time

In the application of polymer gels to profile control and water shutoff,the gelation time will directly determine whether the gel can"go further"in the formation,but the most of the methods for delaying gel gelation time are complicated or have low responsiveness.There is an urgent need for an effective method for delaying gel gelation time with intelligent response.Inspired by the slow-release effect of drug capsules,this paper uses the self-assembly effect of gas-phase hydrophobic SiO_(2) in aqueous solution as a capsule to prepare an intelligent responsive self-assembled micro-nanocapsules.The capsule slowly releases the cross-linking agent under the stimulation of external conditions such as temperature and pH value,thus delaying gel gelation time.When the pH value is 2 and the concentration of gas-phase hydrophobic SiO_(2) particles is 10%,the gelation time of the capsule gel system at 30,60,90,and 120℃is12.5,13.2,15.2,and 21.1 times longer than that of the gel system without containing capsule,respectively.Compared with other methods,the yield stress of the gel without containing capsules was 78 Pa,and the yield stress after the addition of capsules was 322 Pa.The intelligent responsive self-assembled micronanocapsules prepared by gas-phase hydrophobic silica nanoparticles can not only delay the gel gelation time,but also increase the gel strength.The slow release of cross-linking agent from capsule provides an effective method for prolongating the gelation time of polymer gels.

Self-Assembled Dextrin Nanogel as Curcumin Delivery System

Curcumin is a natural polyphenol with anti-oxidative, anti-inflammatory and anti-cancer properties. Its therapeutic potential is substantially hindered by the rather low water solubility and bioavailability, hence the need for suitable carriers. In this study, we show that self-assembled nanogels obtained from hydrophobically modified dextrin are effective curcumin nanocarriers. The stability and loading efficiency of curcumin-loaded nanogel depends on the nanogel/curcumin ratio. Higher stability of the formulation is achieved in water than in PBS buffer, as evaluated by dynamic light scattering and fluorescence measurements. The in vitro release profile, using sink conditions, indicates that dextrin nanogel may perform as a suitable carrier for the controlled release of curcumin. Biological activity of curcumin-loaded nanogel in HeLa cell cultures was assessed using the MTS assay.

Analysis of electrochemical impedance and XRD spectroscopy for complex self-assembled film on silver

Self-assembled monolayers （SAMs） of （3-mercaptopropy） trimethoxysilane （3-MtrF） chemisorbed on silver surfaces were chemically ＂modified by 1-octadecanethiol to form self-assembled mixed-monolayers （SAMM） and the co-polymer of N-vinylcarbazole and methyl methacrylate ester （to form complex selfassembled film （CSAF））. The oxidation resistance of these barriers on silver surfaces and some influential factors concerned processes were analyzed by electrochemical impedance spectroscopy （EIS） in a 10% NaOH aqueous solution at oxidation potential. X-ray diffraction （XRD） spectroscopy shows that the oxidation occurring on the silver surface may be restrained effectively due to the coating barrier, and CSAF（Ⅱ） is the best one. Studies also reveal that oxide processes of bare silver and a series of modified silver electrodes in a 10% NaOH aqueous solution are of more than two relaxation time constants.

Surface Enhanced Raman Scattering on Self-assembled Nano Silver Film Prepared by Electrolysis Method

We demonstrate surface enhanced Raman scattering （SERS） detection of self-assembled nano silver film using a low-cost electrolysis strategy at a proper voltage and silver nitrate concentration in electrolyte. The concentration dependence of SERS from crystal violet （CV） molecules adsorbed to silver film was systematically studied. Importantly, the SERS surface enhancement factor of such nano silver film was 603, which was measured by a portable Raman spectrometer. The minimum concentration of detectable CV molecules can be as low as 10^-11 mol/L. The nano silver film prepared by this electrolysis method is an active, stable, cost-effective, and reusable SERS substrate.

Effect of water content on corrosion inhibition behavior of self-assembled TDPA on aluminum alloy surface

Self assembled monolayers （SAMs） of 1-tetradecylphosphonic acids （TDPA, CH3（CH2）13P（O）（OH）2 ） were formed on the 2024 aluminum alloy surface in TDPA-containing ethanol-water solutions with different water content. The adsorption and corrosion protection properties of the SAMs for 2024 alloy in 0.1 mol/L H2SO4 solution were examined and characterized by potentiodynamic polarization, electrochemical impedance spectrum （EIS）, Fourier transformed infrared spectroscopy （FTIR）, Auger electron spectra （AES） and atomic force microscopy （AFM）. FTIR and AES results show that the TDPA molecules were successfully adsorbed on the 2024 aluminum alloy surface, and the density of the SAMs increased with the increasing water content in the assembly solution. The results of electrochemical studies and corrosion morphologies observed by AFM show that a 4 h modification resulted in maximal inhibition efficiency, and the higher the water content in the assembly solution is, the better the inhibition performance of the SAMs can be achieved. The effect of water content in TDPA solutions on the performance of the SAMs is related to the hydration reaction of the metal surface.

Dielectric Properties of Self-assembled Monolayers of Dithiols

Dielectric properties of dithiol self-assemble monolayers （SAMs） under ac electric field were presented, Using a Hg-SAM/SAM-Ⅱg junction, the ac impedances of dithiol SAMs were measured using a sinusoidal perturbation of 30 mV （peak to-peak） with the frequency ranging from 1 Hz to 1 MHz at zero bias. The contributions from dithiol SAMs and solvent interlayers were separated due to their different behaviors at ac impedance. The peak position in the loss spectra （the plot; of tgδ vs. frequency） moves to low frequcney with the incrcase of chain length of dithiols. Using a correlation of peak position with the chain length, the active energies of 23-39 meV for dithiol SAMs of C6-C10 under an ac electric field were derived,

Redox-sensitive, PEG-shielded carboxymethyl PEI nanogels silencing MicroRNA-21, sensitizes resistant ovarian cancer cells to cisplatin

A series of branched polyethylenimine(PEI) modifications including PEGylation(PEG2 k-PEI) for steric shielding, redox-sensitive crosslinking for synthesis PEG2 k-PEI-ss nanogels and subsequent carboxymethylation(PEG2 k-CMPEI-ss) for modulation of the polymer pk a have been introduced for cellular delivery of Anti-mi R-21. The synthesis was characterized using 1 H NMR, FTIR, TNBS, potentiometric titration, particle size and ζ potential. Loading of Anti-mi R-21 at various N/P ratios was investigated by gel retardation, ethidium bromide dye exclusion, heparin sulfate competition and DNase I digestion experiments. The mi R-21 silencing was measured by stem-loop RT PCR in A2780 ovarian cancer cell lines whether it is sensitive to resistant to cisplatin. It has been shown that PEG2 k-CMPEI-ss was well suited for delivery of Anti-mi R-21 in terms of nucleic acid loading, preservation against extracellular matrix and nucleases and sequence-specific silencing of mi RNA-21 in vitro. Moreover, it has been demonstrated that pre-treating cells with Anti-mi R-21 loaded nanogels can sensitize them to cis-Pt even at non-toxic concentraions. The results indicate that PEG2 k-CMPEIss mediated micro RNA delivery can be considered as a novel strategy for ovarian cancer therapy.

Phase Transition of Poly（acrylic acid-co-N-isopropylacrylamide） Core-shell Nanogels

A series of poly（acrylic acid） macromolecular chain transfer agents with different molecular weights were synthesized by reversible addition-fragmentation chain transfer （RAFT） poly- merization and characterized by 1^H NMR and gel permeation chromatography. Multiresponsive core-shell nanogels were prepared by dispersion polymerization of N-isopropylacrylamide in water using these poly（potassium acrylate） macro-RAFT agents as the electrostcric stabilizer. The size of the nanogels decreases with the amount of the macro-RAFT agent, indicating that the surface area occupied by per polyelectrolyte group is a critical parameter for stabilizing the nanogels. The volume phase transition and the zeta potentials of the nanogels in aqueous solutions were studied by dynamic light scattering and zetasizer analyzer, respectively.

Tunneling Electron Induced Fluorescence from Single Porphyrin Molecules Decoupled by Striped-Phase Octanethiol Self-assembled Monolayer

We investigate tunneling electron induced luminescence from isolated single porphyrin molecules that are decoupled by striped-phase self-assembled monolayer of octanethiol from the underneath Au（111） substrate. Intrinsic single-molecule electroluminescence has been realized by such decoupling at both bias polarities. The photon emission intensity acquired from the molecular lobe is found stronger than that from the molecular center. These re- sults provide useful information on the understanding of electroluminescent behavior and mechanism in molecular tunnel junctions.

5-Fluorouracil-loaded Self-assembled pH-sensitive Nanoparticles as Novel Drug Carrier for Treatment of Malignant Tumors

In order to improve the cancer-targeting and selective activity of antineoplastic agent [5-fluorouracil （5-FU）], a novel pH-responsive drug delivery system [pullulan acetate/sulfonamide （PA/SDM） conjugate] was synthesized by a diafiltration method. Sulfonamide was grafted to the hydrophobicaUy modified pullulan acetate to enhance the pH sensitivity for better cancer-targeting delivery. 5-FU was loaded into the self-assembled nanoparticles by the same method. The drug-loaded self-assembled nanoparticles were successfully obtained and characterized in terms of particle size, morphology and drug loading and release profile at various pHs. The results showed that the mean diameter of the self-assembled particles was approximately 100nm, with uniform size and good spherical morphology. The nanoparticles showed good stability at pH 7.4, which is equal to that of the normal body fluid, but shrank and aggregated below pH 6.8, which is close to the pH with tumors. The loading efficiency and concentration of released 5-FU was monitored at 269 nm on the UVNis spectrophotometer. The release profile was heavily pH-dependent around phvsiological pH, and the release rate was significantly enhanced under pH of 6.8.

Preparation of low-temperature sintered high conductivity inks based on nanosilver self-assembled on surface of graphene

Finer nanoplates of silver are prepared by self-assembly on the surface of graphene,and the low-temperature sintered high conductivity ink containing the silver nanoplates is prepared.Most importantly,graphene is added to the solution before the chemical reduction reaction occurs.Firstly,it is found that silver nanoplates have self-assembly phenomenon on the surface of graphene.Secondly,the Ag nano hexagonal platelets(AgNHPs)with small particle sizes(10 nm),narrow distribution and good dispersion are prepared.Especially,smaller sizes(10 nm)and narrower particle size distribution of AgNHPs particles can be easily controlled by using this process.Finally,the conductivity of the ink is excellent.For example,when the printed patterns were sintering at 150℃,the resistivity of the ink(GE:0.15 g/L)reached the minimum value of 2.2×10^-6 cm.And the resistivity value was 3.7×10^-6Ωcm,when it was sintered at 100℃ for 30 min.The conductive ink prepared can be used for the field of printing electronics as ink-jet printing ink.

Novel self-assembled films of La-based phosphonate 3-aminopropyltriethoxysilane

Silane coupling reagent (3-aminopropyltriethoxysilane (APTES)) was prepared on single-crystal silicon substrates to form two-dimensional self-assembled monolayer (SAM). The terminal-NH2 groups in the film were in situ phosphorylated to -PO(OH)2 group to endow the film with good chemisorption ability. Then La-based thin films were deposited on phosphorylated APTES-SAM in order to make good use of the chemisorption ability of -PO(OH)2 groups. The thickness of the film was determined with ellipsometer, while phase transformation and surface morphology, surface energy, phase composition were analyzed by means of atomic force microscope (AFM), contact angle measurements and X-ray photoelectron spectroscopy (XPS). The results indicated that the terminal-NH2 groups could be completely transformed into desirable-PO(OH)2 groups after phosphorylation of APTES-SAM. Detailed XPS analysis of the La3+ peaks revealed that lanthanum element existed in the films in different states. As a result, conclusion could be made that lanthanum reacted with -PO(OH)2 groups on the surface of the substrate by chemical bond which would improve the bonding strength between the film and silicon substrate. Since the La-based thin films were well adhered to the silicon substrate, it might find promising application in the surface-modification of single-crystal Si and SiC in microelectromechanical systems (MEMS).

Self-assembled activated carbon sandwiched graphene film for symmetrical supercapacitors

Activated carbon(AC)particles sandwiched reduced graphene oxide sheets(rGO)film has been successfully fabricated via a facile self-assemble approach.The as-formed AC/rGO film is self-standing,flexible and mechanically robust,allowing to be transferred to any substrate on demand without rupture.Since AC particles effectively suppressed the restacking of the rGO sheet,AC/rGO film exhibits loose layer-by-layer stacking structures with various gaps between AC particles and rGO sheets,which is different from compact structures of pure graphene films.The as-formed gaps provide fast diffusion channels for electrolyte ions and enhanced accessible surface area of rGO.Therefore,the AC/rGO electrode delivers improved electrochemical performance over the voltage range of 0.0−3.0 V.This work offers a promising strategy to design free-standing supercapacitor electrodes based on traditional nanocarbon materials.

Recent advances in design and applications of biomimetic self-assembled peptide hydrogels for hard tissue regeneration

The development of natural biomaterials applied for hard tissue repair and regeneration is of great importance,especially in societies with a large elderly population.Self-assembled peptide hydrogels are a new generation of biomaterials that provide excellent biocompatibility,tunable mechanical stability,injectability,trigger capability,lack of immunogenic reactions,and the ability to load cells and active pharmaceutical agents for tissue regeneration.Peptide-based hydrogels are ideal templates for the deposition of hydroxyapatite crystals,which can mimic the extracellular matrix.Thus,peptide-based hydrogels enhance hard tissue repair and regeneration compared to conventional methods.This review presents three major self-assembled peptide hydrogels with potential application for bone and dental tissue regeneration,including ionic self-complementary peptides,amphiphilic(surfactant-like)peptides,and triple-helix(collagen-like)peptides.Special attention is given to the main bioactive peptides,the role and importance of self-assembled peptide hydrogels,and a brief overview on molecular simulation of self-assembled peptide hydrogels applied for bone and dental tissue engineering and regeneration.

Attachment of tyrosinase on mixed self-assembled monolayers for the construction of electrochemical biosensor

A mixed self-assembled monolayers （SAMs） of thioctic acid （T-COOH） and thioctic acid amide （T-NH2） were used to immobilize tyrosinase for fabricating biosensor. The results showed that the mixed SAMs prepared from solution at the ratio of 1：4 provided an excellent microenvironment for enzymatic reaction between tyrosinase and substrate. The biosensor exhibited a fast response and high sensitivity for sensing substrate.