Self-assembly of α-6T Molecule on Ag（100） and Related STM Induced Luminescence

We have investigated the self-assembly and light emission properties of organic α- sexithiophene （α-6T） molecules on Ag（100） under different coverage by scanning tunneling microscopy （STM）. At very low coverage, the α-6T molecules form a unique enantiomer by grouping four molecules into a windmill supermolecular structure. As the coverage is increased,α-6T molecules tend to pack side by side into a denser stripe structure. Further increase of the coverage will lead to the layer-by-layer growth of molecules on Ag（100） with the lower-layer stripe pattern serving as a template. Molecular fluorescence for α-6T molecules on Ag（100） at a coverage of five monolayers has been detected by light excitations, which indicates a well decoupled electronic states for the top-layer α-6T molecules. However, the STM induced luminescent spectra for the same sample reveal only plasmonic-like emission. The absence of intramolecular fluorescence in this case suggests that the electronic decoupling is not a sufficient condition for generating photon emission from molecules. For intramolecular fluorescence to occur, the orientation of the dynamic dipole moment of molecules and the energy-level alignment at the molecule-metal interface are also important so that molecules can be effectively excited through efficient dipolar coupling with local plasmons and by injecting holes into the molecules.

Self-assembly of perovskite nanocrystals:From driving forces to applications

Self-assembly of metal halide perovskite nanocrystals(NCs)into superlattices can exhibit unique collective properties,which have significant application values in the display,detector,and solar cell field.This review discusses the driving forces behind the self-assembly process of perovskite NCs,and the commonly used self-assembly methods and different self-assembly structures are detailed.Subsequently,we summarize the collective optoelectronic properties and application areas of perovskite superlattice structures.Finally,we conclude with an outlook on the potential issues and future challenges in developing perovskite NCs.

Alcohol solvent effect on the self-assembly behaviors of lignin oligomers

The interactions between lignin oligomers and solvents determine the behaviors of lignin oligomers self-assembling into uniform lignin nanoparticles(LNPs).Herein,several alcohol solvents,which readily interact with the lignin oligomers,were adopted to study their effects during solvent shifting process for LNPs’production.The lignin oligomers with widely distributed molecular weight and abundant guaiacyl units were extracted from wood waste(mainly consists of pine wood),exerting outstanding self-assembly capability.Uniform and spherical LNPs were generated in H_(2)O-n-propanol cosolvent,whereas irregular LNPs were obtained in H_(2)O-methanol cosolvent.The unsatisfactory self-assembly performance of the lignin oligomers in H_(2)O-methanol cosolvent could be attributed to two aspects.On one hand,for the initial dissolution state,the distinguishing Hansen solubility parameter and polarity between methanol solvent and lignin oligomers resulted in the poor dispersion of the lignin oligomers.On the other hand,strong hydrogen bonds between methanol solvent and lignin oligomers during solvent shifting process,hindered the interactions among the lignin oligomers for self-assembly.

Chitosan/Sodium Alginate Multilayer pH-Sensitive Films Based on Layer-by-Layer Self-Assembly for Intelligent Packaging

The abuse of plastic food packaging has brought about severe white pollution issues around the world.Developing green and sustainable biomass packaging is an effective way to solve this problem.Hence,a chitosan/sodium alginate-based multilayer film is fabricated via a layer-by-layer(LBL)self-assembly method.With the help of superior interaction between the layers,the multilayer film possesses excellent mechanical properties(with a tensile strength of 50 MPa).Besides,the film displays outstanding water retention property(blocking moisture of 97.56%)and ultraviolet blocking property.Anthocyanin is introduced into the film to detect the food quality since it is one natural plant polyphenol that is sensitive to the pH changes ranging from 1 to 13 in food when spoilage occurs.It is noted that the film is also bacteriostatic which is desired for food packaging.This study describes a simple technique for the development of advanced multifunctional and fully biodegradable food packaging film and it is a sustainable alternative to plastic packaging.

Hollow tubes constructed by carbon nanotubes self-assembly for CO_(2) capture

Carbon nanotubes(CNTs)have garnered significant attention in the fields of science,engineering,and medicine due to their numerous advantages.The initial step towards harnessing the potential of CNTs involves their macroscopic assembly.The present study employed a gentle and direct self-assembly technique,wherein controlled growth of CNT sheaths occurred on the metal wire’s surface,followed by etching of the remaining metal to obtain the hollow tubes composed of CNTs.By controlling the growth time and temperature,it is possible to alter the thickness of the CNTs sheath.After immersing in a solution containing 1 g/L of CNTs at 60℃ for 24 h,the resulting CNTs layer achieved a thickness of up to 60μm.These hollow CNTs tubes with varying inner diameters were prepared through surface reinforcement using polymers and sacrificing metal wires,thereby exhibiting exceptional attributes such as robustness,flexibility,air tightness,and high adsorption capacity that effectively capture CO_(2) from the gas mixture.

A Non-parametric Gradient-Based Shape Optimization Approach for Solving Inverse Problems in Directed Self-Assemblyof Block Copolymers

We consider the inverse problem of finding guiding pattern shapes that result in desired self-assembly morphologies of block copolymer melts.Specifically,we model polymer selfassembly using the self-consistent field theory and derive,in a non-parametric setting,the sensitivity of the dissimilarity between the desired and the actual morphologies to arbitrary perturbations in the guiding pattern shape.The sensitivity is then used for the optimization of the confining pattern shapes such that the dissimilarity between the desired and the actual morphologies is minimized.The efficiency and robustness of the proposed gradient-based algorithm are demonstrated in a number of examples related to templating vertical interconnect accesses(VIA).

Confined cobalt single-atom catalysts with strong electronic metal-support interactions based on a biomimetic self-assembly strategy

Designing high-performance and low-cost electrocatalysts for oxygen evolu-tion reaction(OER)is critical for the conversion and storage of sustainable energy technologies.Inspired by the biomineralization process,we utilized the phosphorylation sites of collagen molecules to combine with cobalt-based mononuclear precursors at the molecular level and built a three-dimensional(3D)porous hierarchical material through a bottom-up biomimetic self-assembly strategy to obtain single-atom catalysts confined on carbonized biomimetic self-assembled carriers(Co SACs/cBSC)after subsequent high-temperature annealing.In this strategy,the biomolecule improved the anchoring efficiency of the metal precursor through precise functional groups;meanwhile,the binding-then-assembling strategy also effectively suppressed the nonspecific adsorption of metal ions,ultimately preventing atomic agglomeration and achieving strong electronic metal-support interactions(EMSIs).Experimental characterizations confirm that binding forms between cobalt metal and carbonized self-assembled substrate(Co–O_(4)–P).Theoretical calculations disclose that the local environment changes significantly tailored the Co d-band center,and optimized the binding energy of oxygenated intermediates and the energy barrier of oxygen release.As a result,the obtained Co SACs/cBSC catalyst can achieve remarkable OER activity and 24 h durability in 1 M KOH(η_(10) at 288 mV;Tafel slope of 44 mV dec^(-1)),better than other transition metal-based catalysts and commercial IrO_(2).Overall,we presented a self-assembly strategy to prepare transition metal SACs with strong EMSIs,providing a new avenue for the preparation of efficient catalysts with fine atomic structures.

Layer by Layer Self-assembly Fiber-based Flexible Electrochemical Transistor

Poly(3,4-ethylenedioxyethiophene)-polystyrene sulfonic acid(PEDOT:PSS)/polyallyl dimethyl ammonium chloride modified reduced graphene oxide(PDDA-rGO)was layer by layer self-assembled on the cotton fiber.The surface morphology and electric property was investigated.The results confirmed the dense membrane of PEDOT:PSS and the lamellar structure of PDDA-rGO on the fibers.It has excellent electrical conductivity and mechanical properties.The fiber based electrochemical transistor(FECTs)prepared by the composite conductive fiber has a maximum output current of 8.7 mA,a transconductance peak of 10 mS,an on time of 1.37 s,an off time of 1.6 s and excellent switching stability.Most importantly,the devices by layer by layer self-assembly technology opens a path for the true integration of organic electronics with traditional textile technologies and materials,laying the foundation for their later widespread application.

Preparation of Nano-sized Silica-alumina Support by Supersolubilizing Self-assembly Technique

Nano-sized silica-alumina particles were in-situ synthesized in supersolubilizing reverse micellae.Both the most probable pore diameters and the particle sizes were distributed in nano-scale SiO2-Al2O3 particulates.The influence of SiO2/Al2O3 mass ratio and the surfactant content on the particle size and morphology,pore structure,and acidity was characterized by the low temperature nitrogen adsorption/desorption (BET),SEM,TEM and NH3-TPD methods.The test results indicated that the most probable pore diameter of SiO2-Al2O3 nanoparticles was around 10 nm,the specific surface area was about 223-286 m2 /g,the pore volumes were about 0.48-0.63 cm 3 /g,and the particle sizes of porous SiO2-Al2O3 calcined at 550 ℃ were distributed always in the range between 10 nm to 50 nm.The calcined SiO2-Al2O3 nano-powders showed their acidity being stronger than the porous γ-Al2O3 support.

Electrochemical Self-Assembly of Nanoporous Alumina Templates Title

Porous alumina was fabricated electrochemically through anodic oxidation of aluminum by means of such a self-organized method. Anodic aluminium oxide (AAO) template with nanopores was grown by two-steps anodization processes from a high purity aluminium foil. The anodization process was carried out in a phosphoric acid electrolyte at ambient temperature with a different duration of anodization. The analysis observation by Atomic Force Microscopy (AFM) showed that nanopore size increased with anodization time. The nanopore sizes of porous alumina were (16.04, 26.19 and 37.39 nm) for (1, 2 and 3 hour) respectively.

Effect of water content on corrosion inhibition behavior of self-assembled TDPA on aluminum alloy surface

Self assembled monolayers （SAMs） of 1-tetradecylphosphonic acids （TDPA, CH3（CH2）13P（O）（OH）2 ） were formed on the 2024 aluminum alloy surface in TDPA-containing ethanol-water solutions with different water content. The adsorption and corrosion protection properties of the SAMs for 2024 alloy in 0.1 mol/L H2SO4 solution were examined and characterized by potentiodynamic polarization, electrochemical impedance spectrum （EIS）, Fourier transformed infrared spectroscopy （FTIR）, Auger electron spectra （AES） and atomic force microscopy （AFM）. FTIR and AES results show that the TDPA molecules were successfully adsorbed on the 2024 aluminum alloy surface, and the density of the SAMs increased with the increasing water content in the assembly solution. The results of electrochemical studies and corrosion morphologies observed by AFM show that a 4 h modification resulted in maximal inhibition efficiency, and the higher the water content in the assembly solution is, the better the inhibition performance of the SAMs can be achieved. The effect of water content in TDPA solutions on the performance of the SAMs is related to the hydration reaction of the metal surface.

Cultural and luminescent Conditions of a Marine luminous Bacterium

Study of marine noctilucence in marine is important to fishery, environmental monitoring and military affairs. A luminous bacterial strain D2 was isolated from the marine sediment samples collected near Donghai Island in Zhanjiang, China. The primary cultural and luminescent conditions of luminous bacterium D2 which was identified as Vibrio sp. were determined in liquid culture. The results showed that pH 7.0, 35 ℃, with 2.0 % NaCI, were the best growth conditions, and pH5 - 6, 20℃, OD600 0.08, with 3.0 % NaCI, were the optimal luminescent conditions.

血清CA153,CA125水平与老年Luminal型乳腺癌患者内分泌治疗耐药的关系

目的探究老年Luminal型乳腺癌患者血清糖类抗原153(CA153)、糖类抗原125(CA125)水平与内分泌治疗耐药的相关性。方法选取158例2018年6月至2022年6月于甘肃省肿瘤医院接受乳腺癌内分泌治疗后复查的60岁以上已绝经的Luminal型乳腺癌患者,根据是否出现耐药,分为耐药组(n=104)和敏感组(n=54)。对比两组患者的一般资料,Spearman相关性分析血清CA153、CA125水平与临床病理特征的关系,限制性立方样条模型(RCS)分析血清CA153和CA125水平与内分泌耐药的剂量-反应关系,Logisitic回归分析内分泌治疗耐药的危险因素。以危险因素建立临床预测模型,其中模型一不包含CA153,模型二包含全部因素,对两个预测模型进行ROC分析和Hosmer-Lemeshow检验。结果158例患者内分泌治疗耐药率为65.83%,两组患者的年龄、肿瘤直径、淋巴结转移、T分期、N分期、组织学分级、血清CA153水平、血清CA125水平的差异均具有统计学意义(P<0.05)。血清CA153,CA125水平与年龄、肿瘤直径、淋巴结转移、T分期、N分期均呈正相关,血清CA153,CA125水平与组织学分级呈负相关。调整混杂因素后,血清CA153水平>171.28 U/mL、CA125水平>186.32 U/mL与内分泌治疗耐药具有强相关性。Logistic回归分析结果显示,高龄、肿瘤较大、T分期较高、N分期较高、组织学分级G3、血清CA153水较高、血清CA125水较高均是内分泌治疗耐药的独立危险因素(P<0.05)。模型一的ROC曲线下面积为0.823(95%CI:0.702~0.862),模型二的ROC曲线下面积为0.884(95%CI:0.783~0.891)。Hosmer-Lemeshow检验显示预测模型一P=0.763,预测模型二P=0.975,均提示拟合优度良好。结论血清CA153,CA125水平具有对内分泌治疗耐药的预测价值,血清CA153,CA125水平越高则内分泌治疗耐药风险越高。

Self-assembly and UV-curing Property of Polymerized Lyotropic Liquid Crystal Monomer of Sodium 3,4,5-tris（ll-acryloxyundecyloxy）benzoate

A polymerized lyotropic liquid crystal monomer of sodium 3,4,5-tris（11-acryloxyundecyloxy）- benzoate was synthesized by a convenient route starting from 3,4,5-trihydroxybenzoic acid via esterification followed by etherification, acylation and finally neutralization. The chemi- cal structure was confirmed by Fourier transform infrared （FT-IR） and 1H nuclear magnetic resonance spectral analysis. The self-organization behavior of the monomer with deionized water in methanol at room temperature was also demonstrated. The assemblies were char- acterized by polarized optical microscope and X-ray diffraction. The results show that a solution containing 80：20 of the monomer to water was found to be able to self-organize into Lamellar （La） phase and 92：8 with inverted hexagonal （H]I） phase, which was in ac- cordance with the theoretical calculation of critical packing parameter. It suggests that the concentration of the monomer was the key factor to influence assembly structure. Addi- tionally, the acrylate conversion with different photoinitiators and nanostructure retention after polymerization were investigated. The research shows that the acrylate conversion of the monomer with Darocur2959 could reach up to 78% when irradiated by 30 mW/cm2 UV light of 365 nm for 30 min characterized by Real-time FT-IR as well as the sol-gel method. Meanwhile, the La and HII phase nanostructures were both retained after polymerization.

Polyaniline Formed in Alkaline Solution─A New Luminous Material

Electropolymerization of aniline in KOH solution and properties of the polymer are studied by using in situ reflex ellipsometry, cyclic voltammetry and fluorescence spectroscopic method. The change patterns of ellipsometric parameters and the thickness of film in the process of electropolymerization are investigated. The complex refractive indices and the fluorescence spectra of PAN indicate that the PAN is a new kind of luminous material.

Study of An Unsymmetrical Shadow Mask PDP with High Luminous Efficacy

A new shadow mask plasma display panel （SMPDP） is presented in this article. The unsymmetrical geometry structure of the discharge cell is its main feature. A macro-cell with a ratio of 40：1 was designed and fabricated. The geometrical parameters and electrode＇s structure of the discharge cell of the unsymmetrical SMPDP were optimized. Compared with current SMPDP, its luminous efficiency was obviously improved. Then a 32-inch wide video graphics array （WVGA） unsymmetrical SMPDP with a luminous efficacy of 1.8 Lm/W was produced.

Influence of artificial luminous environment and TCM intervention on development of myopia rabbits

Objective:To explore the influence of artificial luminous environment and preventive function of traditional Chinese medicine(TCM) intervention based on "Theory of yin-yang clock" on myopia.Methods:A total of 45 New Zealand young rabbits were randomly divided into 5groups,9 for each group.Control group was exposed in natural light.Fluorescent group and full spectrum group were exposed in fluorescent light and full spectrum light,on which basis fluorescent TCM group and full spectrum TCM group were added with "Rizhong Yinyang Formulas",respectively.Optical parameters were measured and the influence of different lights on the serum and retinal dopamine(DA) levels as well as the retinal histopathological tissues was observed.Results:The spectrum of fluorescent light mainly focused at 420-490 nm with the peak value of wavelength near 450 nm,whereas that of full spectrum was wider(400-800 nm) with the peak value near 600 nm.After 4 and 12 weeks,fluorescent group was evidently lower in serum and retinal DA levels(P<0.01).and there was no significant difference among full spectrum group,fluorescent TCM group and full spectrum TCM group(P>0.05).Histopathological observation showed that there was significant difference in pigment epithelium layer,photoreceptor and nerve fiber layer between fluorescent group and control group,but the difference among the test groups was not significant.Conclusions:Fluorescent light has certain influence on retinal histological construction and visual performance.However,TCM intervention may have some degree of protective function on retina.

Tailoring the Self-assembly of Melamine on Au（111） via Doping with Cu Atoms

The doping effect of Cu on the self-assembly film of melamine on an Au（111） surface has been investigated with scanning tunneling microscopy （STM）. The evaporated Cu adatoms occupy the positions underneath the amino groups and change the hydrogen bonding pat- tern between the melamine molecules. Accordingly, the self-assembly structure has changed stepwise from a well-defined honeycomb into a track-like and then a triangular structure depending on the amount of Cu adatoms. The interaction between Cu adatom and melamine is moderate thus the Cu adatoms can be released upon mild heating to around 100 ℃. These findings are different from previous observations of either the coordination assembly or the physically trapped metal adatoms.

Self-assembly of Binary Particles with Electrostatic and van der Waals Interactions

Nanoparticles with competitive interactions in solution can aggregate into complex structures. In this work, the synergistic self-assembles of binary particles with electrostatic and van der Waals interactions are studied with the particle Langevin dynamics simulation using a simple coarse-grained particle model. Various aggregations such as spherical, stacking-disk and tube structures are observed by varying the particles size and the interaction strength. The aggregation structures are explained with the packing theories of amphiphilic molecules in solution and dibolck copolymers in bulk. When the opposite ions are introduced into solution, the distribution of structures in the phase diagram appears an obvious offset. The simulation result is helpful to deeply understand the formation mechanism of complex nanostructures of multicomponent particles in solution.

Luminous Shapes with Unusual Motions as Potential Predictors of Earthquakes: A Historical Summary of the Validity and Application of the Tectonic Strain Theory

For centuries and on every continent discrete shapes of lights with unusual motions have preceded earthquakes. The numbers of these lights per interval within a region have been strongly correlated with the amount of seismic energy subsequently released within that region. These temporal intervals range between 3 months and 6 months for areas more than 500 kmin radius and less than a month for smaller radii. Other analyses have shown that the same tectonic strain associated with earthquakes is also associated with the display of luminous events before those earthquakes. This strain can be precipitated by injections of fluids into the crust, natural changes in hydrological loads on rivers, or, purposeful displacement of water into reservoirs. The strengths of the associations are sufficient to allow modest forecasting of earthquakes within the boundaries of the region and the temporal interval of analysis. More accurate utilization of these phenomena as prognosticators of specific earthquakes will require a re-evaluation of the manner by which these data are systematically recorded and interpreted.