A new low power, low phase jitter, compact realization, and sell-biased PLL, which is fabricated on SMIC 40 nm CMOS technology is introduced. The proposed self-biased PLL eliminates extra band gap biasing circuits, an...A new low power, low phase jitter, compact realization, and sell-biased PLL, which is fabricated on SMIC 40 nm CMOS technology is introduced. The proposed self-biased PLL eliminates extra band gap biasing circuits, and internally generates all the biasing voltages and currents. Meanwhile, all of the PLL dynamic loop parameters, such as loop bandwidth, natural frequency, damping factors are kept constant adaptively. By optimizing the circuit structures, the perfect unity of chip estate, power dissipation, phase jitter, and loop stability is achieved. THe PLL consumes 4.2 mW of power tinder 1.1 V/2.5 V voltage supply at 2.4 GHz VCO frequency, while occupying a die area of less than 0.02 mmz （180 × 110 μm2）, and the typical period jitter （RMS） is around 2.8 ps.展开更多
This work summarizes the structure and operating features of a high-performance 3-stage dual-delay-path (DDP) voltage-controlled ring oscillator (VCRO) with self-biased delay cells for Phase-Locked Loop (PLL) structur...This work summarizes the structure and operating features of a high-performance 3-stage dual-delay-path (DDP) voltage-controlled ring oscillator (VCRO) with self-biased delay cells for Phase-Locked Loop (PLL) structurebased clock generation and digital system driving. For a voltage supply V<sub>DD</sub> = 1.8 V, the resulting set of performance parameters include power consumption P<sub><sub></sub>DC</sub> = 4.68 mW and phase noise PN@1MHz = -107.8 dBc/Hz. From the trade-off involving P<sub>DC</sub> and PN, a system level high performance is obtained considering a reference figure-of-merit ( FoM = -224 dBc/Hz ). Implemented at schematic level by applying CMOS-based technology (UMC L180), the proposed VCRO was designed at Cadence environment and optimized at MunEDA WiCkeD tool.展开更多
An anodic TiO2/g-C3N4 hetero-junction and cathodic WO3/W were used to build a self-sustained catalytic fuel cell system for oxidizing rhodamine B or triclosan and reducing NO3^--N to N2 simultaneously.The WO3 nano-cat...An anodic TiO2/g-C3N4 hetero-junction and cathodic WO3/W were used to build a self-sustained catalytic fuel cell system for oxidizing rhodamine B or triclosan and reducing NO3^--N to N2 simultaneously.The WO3 nano-catalyst was formed in situ by heating and oxidizing a tungsten wire in air.Cyclic voltammetry and current-time curves were used to characterize the electrochemical properties of the electrodes and system.Aeration and activation of molecular oxygen by self-biased TiO2/g-C3N4 led to the formation of reactive oxidizing species in the fuel cell.The mechanism of simultaneous anodic oxidation of pollutants and cathodic reduction of nitrate was proposed.The spontaneously formed circuit and tiny current were used simultaneously in treating two kinds of wastewater in the reactor chambers,even without light illumination or an external applied voltage.This new catalytic pollution control route can lower energy consumption and degrade many other kinds of pollutants.展开更多
Strontium ferrites with different Bi2O3 content are prepared by the solid phase method, and their magnetic properties are investigated primarily. The Bi2O3 additive and sintering temperature separately exhibit a stron...Strontium ferrites with different Bi2O3 content are prepared by the solid phase method, and their magnetic properties are investigated primarily. The Bi2O3 additive and sintering temperature separately exhibit a strong effect on the sintering density, crystal structure, and magnetic properties of the ferrites. As to the ferrites with 3 wt% Bi2O3, the relatively high sintering density ρs, saturation magnetization Ms, and intrinsic coercivity HCi can be obtained at a low sintering temperature of 900℃ even much lower. Furthermore, the effective magnetic anisotropy constant Keff and magnetic anisotropy field Ha of the ferrites are calculated from the magnetization curve by the law of approach to saturation. It is suggested that the low-temperature sintered SrFe12O19 ferrites with Ms of 285.6 kA/m and Ha of 1564.6 kA/m possess a significant potentiality for applying in the self-biased low-temperature co-fired ceramics circulators from 34 to 40GHz.展开更多
为了抑制机车四象限脉冲整流器在网侧产生的高频谐波,防止车网发生高次谐波共振,提出一种基于二阶广义积分器锁相环SOGI-PLL(second-order generalized integral phase-locked loop)载波移相控制策略。将锁相环输出的电网相位作为同步...为了抑制机车四象限脉冲整流器在网侧产生的高频谐波,防止车网发生高次谐波共振,提出一种基于二阶广义积分器锁相环SOGI-PLL(second-order generalized integral phase-locked loop)载波移相控制策略。将锁相环输出的电网相位作为同步基准信号,针对网压频率异常波动,快速同步校正PWM载波周期,保证了各单元之间移相角的准确性,获得最优谐波对消效果。同时,该策略对电网谐波和幅值异常跳变不敏感,具有良好的抗干扰性和自适应性。最后通过半实物仿真和地面联调试验,验证了该策略的可行性和对谐波抑制的有效性。展开更多
文摘A new low power, low phase jitter, compact realization, and sell-biased PLL, which is fabricated on SMIC 40 nm CMOS technology is introduced. The proposed self-biased PLL eliminates extra band gap biasing circuits, and internally generates all the biasing voltages and currents. Meanwhile, all of the PLL dynamic loop parameters, such as loop bandwidth, natural frequency, damping factors are kept constant adaptively. By optimizing the circuit structures, the perfect unity of chip estate, power dissipation, phase jitter, and loop stability is achieved. THe PLL consumes 4.2 mW of power tinder 1.1 V/2.5 V voltage supply at 2.4 GHz VCO frequency, while occupying a die area of less than 0.02 mmz （180 × 110 μm2）, and the typical period jitter （RMS） is around 2.8 ps.
文摘This work summarizes the structure and operating features of a high-performance 3-stage dual-delay-path (DDP) voltage-controlled ring oscillator (VCRO) with self-biased delay cells for Phase-Locked Loop (PLL) structurebased clock generation and digital system driving. For a voltage supply V<sub>DD</sub> = 1.8 V, the resulting set of performance parameters include power consumption P<sub><sub></sub>DC</sub> = 4.68 mW and phase noise PN@1MHz = -107.8 dBc/Hz. From the trade-off involving P<sub>DC</sub> and PN, a system level high performance is obtained considering a reference figure-of-merit ( FoM = -224 dBc/Hz ). Implemented at schematic level by applying CMOS-based technology (UMC L180), the proposed VCRO was designed at Cadence environment and optimized at MunEDA WiCkeD tool.
基金supported by the National Natural Science Foundation of China (21177018, 21677025)the Program of Introducing Talents of Discipline to Universities (B13012)~~
文摘An anodic TiO2/g-C3N4 hetero-junction and cathodic WO3/W were used to build a self-sustained catalytic fuel cell system for oxidizing rhodamine B or triclosan and reducing NO3^--N to N2 simultaneously.The WO3 nano-catalyst was formed in situ by heating and oxidizing a tungsten wire in air.Cyclic voltammetry and current-time curves were used to characterize the electrochemical properties of the electrodes and system.Aeration and activation of molecular oxygen by self-biased TiO2/g-C3N4 led to the formation of reactive oxidizing species in the fuel cell.The mechanism of simultaneous anodic oxidation of pollutants and cathodic reduction of nitrate was proposed.The spontaneously formed circuit and tiny current were used simultaneously in treating two kinds of wastewater in the reactor chambers,even without light illumination or an external applied voltage.This new catalytic pollution control route can lower energy consumption and degrade many other kinds of pollutants.
基金Supported by the Scientific Research Foundation of Education Office of Sichuan Province under Grant No 13Z198the Young and Middle-aged Academic Leaders of Scientific Research Funds of Chengdu University of Information Technology under Grant No J201222
文摘Strontium ferrites with different Bi2O3 content are prepared by the solid phase method, and their magnetic properties are investigated primarily. The Bi2O3 additive and sintering temperature separately exhibit a strong effect on the sintering density, crystal structure, and magnetic properties of the ferrites. As to the ferrites with 3 wt% Bi2O3, the relatively high sintering density ρs, saturation magnetization Ms, and intrinsic coercivity HCi can be obtained at a low sintering temperature of 900℃ even much lower. Furthermore, the effective magnetic anisotropy constant Keff and magnetic anisotropy field Ha of the ferrites are calculated from the magnetization curve by the law of approach to saturation. It is suggested that the low-temperature sintered SrFe12O19 ferrites with Ms of 285.6 kA/m and Ha of 1564.6 kA/m possess a significant potentiality for applying in the self-biased low-temperature co-fired ceramics circulators from 34 to 40GHz.
文摘为了抑制机车四象限脉冲整流器在网侧产生的高频谐波,防止车网发生高次谐波共振,提出一种基于二阶广义积分器锁相环SOGI-PLL(second-order generalized integral phase-locked loop)载波移相控制策略。将锁相环输出的电网相位作为同步基准信号,针对网压频率异常波动,快速同步校正PWM载波周期,保证了各单元之间移相角的准确性,获得最优谐波对消效果。同时,该策略对电网谐波和幅值异常跳变不敏感,具有良好的抗干扰性和自适应性。最后通过半实物仿真和地面联调试验,验证了该策略的可行性和对谐波抑制的有效性。
