Self-Learning and Its Application to Laminar Cooling Model of Hot Rolled Strip

The mathematical model for online controlling hot rolled steel cooling on run-out table （ROT for abbreviation） was analyzed, and water cooling is found to be the main cooling mode for hot rolled steel. The calculation of the drop in strip temperature by both water cooling and air cooling is summed up to obtain the change of heat transfer coefficient. It is found that the learning coefficient of heat transfer coefficient is the kernel coefficient of coiler temperature control （CTC） model tuning. To decrease the deviation between the calculated steel temperature and the measured one at coiler entrance, a laminar cooling control self-learning strategy is used. Using the data acquired in the field, the results of the self-learning model used in the field were analyzed. The analyzed results show that the self-learning function is effective.

Self-Learning of Multivariate Time Series Using Perceptually Important Points

In machine learning,positive-unlabelled(PU)learning is a special case within semi-supervised learning.In positiveunlabelled learning,the training set contains some positive examples and a set of unlabelled examples from both the positive and negative classes.Positive-unlabelled learning has gained attention in many domains,especially in time-series data,in which the obtainment of labelled data is challenging.Examples which originate from the negative class are especially difficult to acquire.Self-learning is a semi-supervised method capable of PU learning in time-series data.In the self-learning approach,observations are individually added from the unlabelled data into the positive class until a stopping criterion is reached.The model is retrained after each addition with the existent labels.The main problem in self-learning is to know when to stop the learning.There are multiple,different stopping criteria in the literature,but they tend to be inaccurate or challenging to apply.This publication proposes a novel stopping criterion,which is called Peak evaluation using perceptually important points,to address this problem for time-series data.Peak evaluation using perceptually important points is exceptional,as it does not have tunable hyperparameters,which makes it easily applicable to an unsupervised setting.Simultaneously,it is flexible as it does not make any assumptions on the balance of the dataset between the positive and the negative class.

Where Have Network-based Self-learning Classes Gone?——Reflections & Expectations on the Employment of Network-based Self-learning Classes

To respond to the further development of college English reforms,many universities employed network-based selflearning classes to aid the traditional classroom teaching,especially in teaching listening,but as time went by,some universities gradually gave them up.The paper intends to reflect on the employment of network-based self-learning listening classes,analyz ing the learning with and without its aid,and meanwhile introduce the need to re-employ it,and discuss how we can improve the network-based self-learning classes to help with students' listening.

Mathematical model for cooling process and its self-learning applied in hot rolling mill

Control precision of coiling temperature is one of the key factors affecting the profile shape and surface quality during the cooling process of hot rolled steel strip.For this reason,the core of temperature control precision is to establish an effective cooling mathematical model with self-learning function.Starting from this point,a cooling mathematical model with nonlinear structural characteristics is established in this paper for the cooling process of hot rolled steel strip.By the analysis of self-learning ability,key parameters of the mathematical model could be constantly corrected so as to improve temperature control precision and adaptive capability of the model.The site actual application results proved the stable performance and high control precision of the proposed mathematical model,which would lay a solid foundation to improve the steel product qualities.

SELF-LEARNING FUZZY CONTROL RULES USING GENETIC ALGORITHMS

This papcr presents a new genetic algorithms(GAs)-based method for self-learniag fuzzy control rules. An improved GA is used to learn to optimally select the fuzzy membership functions of the linguistic labels in the condition portion of each rule, and to automatically generate fuzzy control actions under each condition. The dynamics of the controlled system is unknown to the GA. The only information for evaluating performance is a failure signal indicating that the controlled system is out of control. We compare its performance with that of other learning methods for the same problem. We also examine the ability of the algorithm to adapt to changing conditions. Simulation results show that such an approach for self-learning fuzzy control rules is both effective and robust.

Self-learning Fuzzy Controllers Based On a Real-time Reinforcement Genetic Algorithm

This paper presents a novel method for constructing fuzzy controllers based on a real time reinforcement genetic algorithm. This methodology introduces the real-time learning capability of neural networks into globally searching process of genetic algorithm, aiming to enhance the convergence rate and real-time learning ability of genetic algorithm, which is then used to construct fuzzy controllers for complex dynamic systems without any knowledge about system dynamics and prior control experience. The cart-pole system is employed as a test bed to demonstrate the effectiveness of the proposed control scheme, and the robustness of the acquired fuzzy controller with comparable result.

Neuron self-learning PSD control for backside width of weld pool in pulsed GTAW with wire filler

In this paper, the weld pool shape control by intelligent strategy was studied. A neuron self-learning PSD controller for backside width of weld pool in pulsed GTAW with wire filler was designed. The PSD control arithmetic was analyzed, simulating experiment by MATLAB software was done, and the validating experiments on varied heat sink workpiece and varied gap workpiece were successfully implemented. The study results show that the neuron self-learning PSD control method can attain a perfect control effect under different set values and conditions, and is suitable for the welding process with the varied structure and coefficients of control model.

Study on intelligent digital welding machine with a self-learning function

A design idea was proposed that it was about intelligent digital welding machine with self-learning and self- regulation functions. The overall design scheme of software and hardware was provided. It was introduced that a parameter self-learning algorithm was based on large-step calibration and partial Newton interpolation. Furthermore, experimental verification was carried out with different welding technologies. The results show that weld bead is pegrect. Therefore, good welding quality and stability are obtained, and intelligent regulation is realized by parameters self-learning.

A Self-Learning Diagnosis Algorithm Based on Data Clustering

The article describes an approach to building a self-learning diagnostic algorithm. The self-learning algorithm creates models of the object under consideration. The models are formed periodically through a certain time period. The model includes a set of functions that can describe whole object, or a part of the object, or a specified functionality of the object. Thus, information about fault location can be obtained. During operation of the object the algorithm collects data received from sensors. Then the algorithm creates samples related to steady state operation. Clustering of those samples is used for the functions definition. Values of the functions in the centers of clusters are stored in the computer’s memory. To illustrate the considered approach, its application to the diagnosis of turbomachines is described.

The Self-Learning Gate for Quantum Computing

Self-learning is one of the most important scientific methods that helps develop sciences, as it derives from the desire and interests of the individual. However, self-learning loses importance if it does not follow the scientific methodology for building and organizing information. The case becomes harder if the science is new and few scientific sources are available. Quantum computing is one of the new sciences in computer science and needs the support of specialists to develop it. Quantum computing overlaps with many sciences such as physics, chemistry, and mathematics, so any student in one of the previous disciplines may lose the correct self-learning path to find themselves learning the details of another discipline that does not achieve their goals. This article motivates students and those interested in computer science to begin studying the science of quantum computing and choose the same specialization that suits their interests. The article also provides a roadmap for self-learning steps to protect the learner from losing the correct learning path. I have categorized the stages of learning quantum computing into four steps through which all the essential basics can be learned, provided the goals mentioned in each stage which should be achieved. The learning strategy proposed in this article corresponds with individuals’ self-learning rules. Through my personal experience, the proposed learning strategy has proven its effectiveness in building information in an enjoyable scientific way.

Physical neural networks with self-learning capabilities

Physical neural networks are artificial neural networks that mimic synapses and neurons using physical systems or materials.These networks harness the distinctive characteristics of physical systems to carry out computations effectively,potentially surpassing the constraints of conventional digital neural networks.A recent advancement known as“physical self-learning”aims to achieve learning through intrinsic physical processes rather than relying on external computations.This article offers a comprehensive review of the progress made in implementing physical self-learning across various physical systems.Prevailing learning strategies that contribute to the realization of physical self-learning are discussed.Despite challenges in understanding the fundamental mechanism of learning,this work highlights the progress towards constructing intelligent hardware from the ground up,incorporating embedded self-organizing and self-adaptive dynamics in physical systems.

Traffic-Aware Fuzzy Classification Model to Perform IoT Data Traffic Sourcing with the Edge Computing

The Internet of Things(IoT)has revolutionized how we interact with and gather data from our surrounding environment.IoT devices with various sensors and actuators generate vast amounts of data that can be harnessed to derive valuable insights.The rapid proliferation of Internet of Things(IoT)devices has ushered in an era of unprecedented data generation and connectivity.These IoT devices,equipped with many sensors and actuators,continuously produce vast volumes of data.However,the conventional approach of transmitting all this data to centralized cloud infrastructures for processing and analysis poses significant challenges.However,transmitting all this data to a centralized cloud infrastructure for processing and analysis can be inefficient and impractical due to bandwidth limitations,network latency,and scalability issues.This paper proposed a Self-Learning Internet Traffic Fuzzy Classifier(SLItFC)for traffic data analysis.The proposed techniques effectively utilize clustering and classification procedures to improve classification accuracy in analyzing network traffic data.SLItFC addresses the intricate task of efficiently managing and analyzing IoT data traffic at the edge.It employs a sophisticated combination of fuzzy clustering and self-learning techniques,allowing it to adapt and improve its classification accuracy over time.This adaptability is a crucial feature,given the dynamic nature of IoT environments where data patterns and traffic characteristics can evolve rapidly.With the implementation of the fuzzy classifier,the accuracy of the clustering process is improvised with the reduction of the computational time.SLItFC can reduce computational time while maintaining high classification accuracy.This efficiency is paramount in edge computing,where resource constraints demand streamlined data processing.Additionally,SLItFC’s performance advantages make it a compelling choice for organizations seeking to harness the potential of IoT data for real-time insights and decision-making.With the Self-Learning process,the SLItFC model monitors the network traffic data acquired from the IoT Devices.The Sugeno fuzzy model is implemented within the edge computing environment for improved classification accuracy.Simulation analysis stated that the proposed SLItFC achieves 94.5%classification accuracy with reduced classification time.

The Impact of Personalized Learning Path Design on Online Education Platforms on Students’Self-Learning Abilities

The study investigates the impact of personalized learning path design on students’self-learning abilities(SLA)within online education platforms.Employing a mixed-methods approach,the research examines the effectiveness of personalized learning through quantitative surveys and qualitative interviews with a diverse sample of online learners.The findings indicate that personalized learning path design significantly enhances students’self-efficacy,engagement,and satisfaction,leading to improved SLA.The study’s conceptual model and empirical data support the hypothesis that personalization in learning environments fosters self-directed learning skills.The discussion highlights the implications for educational practice,emphasizing the need for online platforms to prioritize personalization and for educators to adapt their teaching methods to support diverse learner needs.The research also acknowledges limitations and suggests future directions,including longitudinal studies and expanded participant demographics.The study concludes that personalized learning path design is a promising strategy for online education platforms to empower learners and promote lifelong learning skills.

医学院校无机化学教学中几点体会

无机化学是医药院校中大多数专业课程的基础科目,实践好无机化学的教学,对专业课程和其他相关课程的学习有直接影响。文章从培养学生的自学能力等几个方面论述了在无机化学教学过程中几点经验与体会。

Nominal friction coefficient in spread formulas based on lead rolling experiments

Friction coefficients in spread formulas were studied under low width-to-thickness ratio. The effects of all the factors on friction were considered as different roughness of surfaces. After lead rolling experiments in 5 different roughness grades, friction coefficients were obtained. With changing width-to-thickness ratio, reduction rate and ratio of diameter of roller to thickness, all the nominal friction coefficients which can be used in these formulas were calculated. Then, a fitting expression was proposed, comparing with the results measured in 232 times tests, the errors of the nominal friction coefficients calculated by the expression are mostly less than 12%. After a certain times self-learning, the errors are no more than 2%. With the varying nominal friction coefficients, the spread will be predicted more accurately. When the nominal friction coefficient is used to predict the spread under the real working condition, the results calculated are also in agreement with the measured ones, and the errors are less than 2%. This credible reference and solution about how to set the friction coefficient in spread formulas would also be used in practical industrial production.

HYDRAULIC PRESSURE SIGNAL DENOISING USING THRESHOLD SELF-LEARNING WAVELET ALGORITHM

A pre-filter combined with threshold self-learning wavelet algorithm is proposed for hydraulic pressure signals denoising. The denoising threshold is self-learnt in the steady flow state, and then modified under a given limit to make the mean square errors between reconstruction signals and desirable outputs minimum, so the corresponding optimal denoising threshold in a single operating case can be obtained. These optimal thresholds are used for the whole signal denoising and are different in various cases. Simulation results and comparative studies show that the present approach has an obvious effect of noise suppression and is superior to those of traditional wavelet algorithms and back-propagation neural networks. It also provides the precise data for the next step of pipeline leak detection using transient technique.

A self-learning TLBO based dynamic economic/environmental dispatch considering multiple plug-in electric vehicle loads

Economic and environmental load dispatch aims to determine the amount of electricity generated from power plants to meet load demand while minimizing fossil fuel costs and air pollution emissions subject to operational and licensing requirements.These two scheduling problems are commonly formulated with non-smooth cost functions respectively considering various effects and constraints,such as the valve point effect,power balance and ramprate limits.The expected increase in plug-in electric vehicles is likely to see a significant impact on the power system due to high charging power consumption and significant uncertainty in charging times.In this paper,multiple electric vehicle charging profiles are comparatively integrated into a 24-hour load demand in an economic and environment dispatch model.Self-learning teaching-learning based optimization(TLBO)is employed to solve the non-convex non-linear dispatch problems.Numerical results onwell-known benchmark functions,as well as test systems with different scales of generation units show the significance of the new scheduling method.

Multivariable temperature measurement and control system of large-scaled vertical quench furnace based on temperature field

A temperature control system of 31m vertical forced air-circulation quench furnace is proposed, which is a kind of equipment critical for thermal treatment of aluminum alloy components that are widely used in aerospace industry. For the effective operation of the furnace, it is essential to analyze the radial temperature distribution of the furnace. A set of thermodynamic balance equations modeling is established firsdy. By utilizing the numerical analysis result to modify the temperature measurements, the control accuracy and precision of the temperature are truly guaranteed. Furthermore, the multivariable decoupling self-learning PID control algorithm based on the characteristics of strong coupling between the multi-zones in the large-scaled furnace is implemented to ensure the true homogeneity of the axial temperature distribution. Finally, the redundant structure composed of industrial control computers and touch panels leads to great improvement of system reliability.

Parallel Neural Network-Based Motion Controller for Autonomous Underwater Vehicles

A parallel neural network-based controller （PNNC） is presented for the motion control of underwater vehicles in this paper. It consists of a real-time part, a self-learning part and a desired-state programmer, and it is different from normal adaptive neural network controller in structure. Owing to the introduction of the self-learning part, on-line learning can be performed without sample data in several sample periods, resulting in high learning speed of the controller and good control performance. The desired-state programmer is utilized to obtain better learning samples of the neural network to keep the stability of the controller. The developed controller is applied to the 4-degree of freedom control of the AUV “IUV- IV” and is successful on the simulation platform. The control performance is also compared with that of neural network controller with different structures such as normal adaptive neural network and different learning methods. Current effects and surge velocity control are also included to demonstrate the controller＇ s performance. It is shown that the PNNC has a great possibility to solve the problems in the control system design of underwater vehicles.

Long-and Short-Term Self-Learning Models of Rolling Force in Rolling Process Without Gaugemeter of Plate

Owing to a lack of gaugemeter and the variety of steel grades and standards in some plate mills, the longand short-term self-learning models of rolling force based on gauge soft-measuring with high precision were brought up. The soft-measuring method and target value locked method were used in these models to confirm the actual exit gauge of passes, and thick layer division and exponential smoothing method were used to dispose the deformation resistance parameter, which could be calculated from the actual data of the rolling process. The correlative mathematical methods can also be adapted to self-learning with gaugemeter. The models were applied to the process control system of AGC （automatic gauge control） reconstruction on 2800 mm finishing mill of Anyang steel and favorable effect was obtained.