This study focused on developing a sustainable composite material using metallic wastes of the iron-steel industry and plastic wastes of the plastic industry in order to reduce resultant waste from the production proc...This study focused on developing a sustainable composite material using metallic wastes of the iron-steel industry and plastic wastes of the plastic industry in order to reduce resultant waste from the production processes of various industrial products and to sustain waste management of these industries.In this study,different amounts of blast furnace dust(BFD),which is the major iron-steel industry waste and is used as filler for recycled low-density polyethylene(LDPE),was mixed with LDPE to produce the composite material.The morphology,mechanical,vicat softening temperature thermal conductivity,hardness and wear resistance properties of BFD filled LDPE composites were assessed.The increasing of BFD in recycled LDPE improved the heat resistance,increased thermal conductivity and wear resistance of composite materials.In addition,it was found that the composite materials had sufficient mechanical properties,when mechanical tests were evaluated.These results showed that the produced composite material could be used in buildings as a floor coating material and thereby saving raw materials and resources,as well as potentially reducing environmental problems.展开更多
Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluent...Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluents contained in the materials appeared at the end of 90´s.This situation was supported by the Council of Europe in 2004 to reduce VOC emissions to zero till 2020.Solvent materials were thus largely replaced by solvent free materials from which the volatile substances are not released into the air.But pressure continued to increase,and over the past decade began to take centre stage water-based epoxy.On the Czech market solvent based material is still occasionally used,but predominant are solvent free materials.There are no commonly used materials containing wastes as fillers in new water-borne and solvent-free epoxy materials.Characteristics identification of the waste material as a potential filler is a set of properties that determine the limits of secondary raw materials or waste as a filler.This paper describes the basic characteristics which must be selected to meet the requirements,to affect negatively the workability,sedimentation,properties and behavior of the final floor system.Some materials must comply with special requirements,such as resistance to chemicals,etc.Next part of paper talks about utilization of polymer floors and their mechanical properties.展开更多
To improve the impact sound insulation performance of building floors and meet the objective requirements for living comfort of residents,in this article,three kinds of elastic cushion materials,Portuguese cork board,...To improve the impact sound insulation performance of building floors and meet the objective requirements for living comfort of residents,in this article,three kinds of elastic cushion materials,Portuguese cork board,BGL insulation sound insulation foam board,and EPP polypropylene plastic foam board,are applied to the sound insulation of a light frame wood floor structure of the same bedroom and compared to the ordinary floor.This study uses the transfer function method and transient excitation method to measure the sound insulation,damping ratio,and elastic modulus of materials,as well as the sound insulation of the floor under the jumping excitation method of daily behavior.Through comparative analysis,the results and factors of improving the sound insulation performance of the floor are obtained,according to which three types of elastic cushion materials and the floor covering composed of them have higher vibration and noise reduction performance.Among them,the overall sound insulation performance of BGL board floor is the highest,followed by EPP board and cork board floor,and ordinary OSB floor is the lowest.Under the jumping excitation method,three floating floors can improve the impact sound insulation performance of the middle and low-frequency bands.展开更多
A unique sulfonated polyaniline/vanadate composite was synthesized and utilized as a composite anode in microbial fuel cells on ocean floor (BMFCs). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were em...A unique sulfonated polyaniline/vanadate composite was synthesized and utilized as a composite anode in microbial fuel cells on ocean floor (BMFCs). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were employed to characterize its chemical composition and morphology. Wettability of the composite anodes decreases due to the addition of polytetrafluoroethylene (PTFE). The electrochemical behavior of the composite anodes was investigated by means of linear sweep voltammetry and Tafel plot measurements. Compared with the plain graphite anode,the composite anode significantly improves the power density,5.5-fold higher,reaching 187.1 mW/m2 and gives a 27-fold higher exchange current density and a higher kinetic activity. A novel synergistic mechanism between sulfonated polyaniline and vanadate is proposed to explain the excellent electrochemical performance. This composite thus has great potential to be used as an anode material for a high-power BMFC.展开更多
基金funded by Gazi University Scientific Research Center(Contract No.48/2013-01).
文摘This study focused on developing a sustainable composite material using metallic wastes of the iron-steel industry and plastic wastes of the plastic industry in order to reduce resultant waste from the production processes of various industrial products and to sustain waste management of these industries.In this study,different amounts of blast furnace dust(BFD),which is the major iron-steel industry waste and is used as filler for recycled low-density polyethylene(LDPE),was mixed with LDPE to produce the composite material.The morphology,mechanical,vicat softening temperature thermal conductivity,hardness and wear resistance properties of BFD filled LDPE composites were assessed.The increasing of BFD in recycled LDPE improved the heat resistance,increased thermal conductivity and wear resistance of composite materials.In addition,it was found that the composite materials had sufficient mechanical properties,when mechanical tests were evaluated.These results showed that the produced composite material could be used in buildings as a floor coating material and thereby saving raw materials and resources,as well as potentially reducing environmental problems.
基金supported by the project"OKTAEDR-partnership and building network."Project registration number is cz.1.07./2.4.00/31.0012.
文摘Recently the manufacture of epoxy coating and flooring materials begun to be under strong pressure to use more environmentally friendly raw materials in its composition.First tendency to reduce of solvents and diluents contained in the materials appeared at the end of 90´s.This situation was supported by the Council of Europe in 2004 to reduce VOC emissions to zero till 2020.Solvent materials were thus largely replaced by solvent free materials from which the volatile substances are not released into the air.But pressure continued to increase,and over the past decade began to take centre stage water-based epoxy.On the Czech market solvent based material is still occasionally used,but predominant are solvent free materials.There are no commonly used materials containing wastes as fillers in new water-borne and solvent-free epoxy materials.Characteristics identification of the waste material as a potential filler is a set of properties that determine the limits of secondary raw materials or waste as a filler.This paper describes the basic characteristics which must be selected to meet the requirements,to affect negatively the workability,sedimentation,properties and behavior of the final floor system.Some materials must comply with special requirements,such as resistance to chemicals,etc.Next part of paper talks about utilization of polymer floors and their mechanical properties.
基金This study was funded by Co-Innovation Center of Efficient Processing and Utilization of Forest Resources(Nanjing Forestry University,Nanjing,210037,China).
文摘To improve the impact sound insulation performance of building floors and meet the objective requirements for living comfort of residents,in this article,three kinds of elastic cushion materials,Portuguese cork board,BGL insulation sound insulation foam board,and EPP polypropylene plastic foam board,are applied to the sound insulation of a light frame wood floor structure of the same bedroom and compared to the ordinary floor.This study uses the transfer function method and transient excitation method to measure the sound insulation,damping ratio,and elastic modulus of materials,as well as the sound insulation of the floor under the jumping excitation method of daily behavior.Through comparative analysis,the results and factors of improving the sound insulation performance of the floor are obtained,according to which three types of elastic cushion materials and the floor covering composed of them have higher vibration and noise reduction performance.Among them,the overall sound insulation performance of BGL board floor is the highest,followed by EPP board and cork board floor,and ordinary OSB floor is the lowest.Under the jumping excitation method,three floating floors can improve the impact sound insulation performance of the middle and low-frequency bands.
基金supported by the Scientific and Technological Development Plan Project of Shandong Province, China (2008GG10007003)the Key Laboratory of Marine Environment & Ecology, Ministry of Education (2008010)the Key Laboratory of Submarine Geoscience and Exploring Technology of Ministry of Education, Ocean University of China (2008-01)
文摘A unique sulfonated polyaniline/vanadate composite was synthesized and utilized as a composite anode in microbial fuel cells on ocean floor (BMFCs). X-ray diffraction (XRD) and thermogravimetric analysis (TGA) were employed to characterize its chemical composition and morphology. Wettability of the composite anodes decreases due to the addition of polytetrafluoroethylene (PTFE). The electrochemical behavior of the composite anodes was investigated by means of linear sweep voltammetry and Tafel plot measurements. Compared with the plain graphite anode,the composite anode significantly improves the power density,5.5-fold higher,reaching 187.1 mW/m2 and gives a 27-fold higher exchange current density and a higher kinetic activity. A novel synergistic mechanism between sulfonated polyaniline and vanadate is proposed to explain the excellent electrochemical performance. This composite thus has great potential to be used as an anode material for a high-power BMFC.
