Self-propelled Leidenfrost droplets on femtosecond-laser-induced surface with periodic hydrophobicity gradient

The controllable transfer of droplets on the surface of objects has a wide application prospect in the fields of microfluidic devices,fog collection and so on.The Leidenfrost effect can be utilized to significantly reduce motion resistance.However,the use of 3D structures limits the widespread application of self-propulsion based on Leidenfrost droplets in microelectromechanical system.To manipulate Leidenfrost droplets,it is necessary to create 2D or quasi-2D geometries.In this study,femtosecond laser is applied to fabricate a surface with periodic hydrophobicity gradient(SPHG),enabling directional self-propulsion of Leidenfrost droplets.Flow field analysis within the Leidenfrost droplets reveals that the vapor layer between the droplets and the hot surface can be modulated by the SPHG,resulting in directional propulsion of the inner gas.The viscous force between the gas and liquid then drives the droplet to move.

Passive particles driven by self-propelled particle:The wake effect

This work focuses on numerically studying hydrodynamic interaction between a passive particle and a self-propelled particle,termed a squirmer,by using a two-dimensional lattice Boltzmann method(LBM).It is found that the squirmer can capture a passive particle and propel it simultaneously,provided the passive particle is situated within the squirmer's wake.Our research shows that the critical capture distance,which determines whether the particle is captured,primarily depends on the intensity of the squirmer's dipolarity.The stronger dipolarity of squirmer results in an increased critical capture distance.Conversely,the Reynolds number is found to have minimal influence on this interaction.Interestingly,the passive particle,when driven by the squirmer's wake,contributes to a reduction in the squirmer's drag.This results in a mutual acceleration for both particles.Our findings can provide valuable perspectives for formulating the principles of reducing the drag of micro-swimmers and help to achieve the goal of using micro-swimmers to transport goods without physical tethers.

Application of Connected Truck Data to Evaluate Spatiotemporal Impact of Rest Area Closures on Ramp Parking

Ensuring adequate access to truck parking is critical to the safe and efficient movement of freight traffic. There are strict federal guidelines for commercial truck driver rest periods. Rest areas and private truck stops are the only places for the trucks to stop legally and safely. In locations without sufficient parking areas, trucks often park on interstate ramps, which create safety risks for other interstate motorists. Historically, agencies have employed costly and time intensive manual counting methods, camera surveillance, and driver surveys to assess truck parking. Connected truck data, available in near real-time, offers an efficient alternative to practitioners to assess truck parking patterns and identify areas where there may be insufficient safe parking spaces. This paper presents a case study of interstate I-70 in east central Indiana and documents the observed spatiotemporal impacts of a rest area closure on truck parking on nearby interstate ramps. Results showed that there was a 28% increase in parking on ramps during the rest area closure. Analysis also found that ramps closest to the rest area were most impacted by the closure, seeing a rise in truck parking sessions as high as 2.7 times. Parking duration on the ramps during rest area closure also increased drastically. Although it was expected that this would result in increased parking by trucks on adjacent ramps, this before, during, after scenario provided an ideal scenario to evaluate the robustness of these techniques to assess changing parking characteristics of long-haul commercial trucks. The data analytics and visualization tools presented in this study are scalable nationwide and will aid stakeholders in informed data-driven decision making when allocating resources towards improving the nations commercial vehicle parking infrastructure.

Intermodal Competition: Cargo Airships versus Long-Haul Trucking for Perishable Commodities

Intermodal competition changes with changes in technology, economics, and environmental concerns. Trucks and airships are generally considered not to be competitors, but this depends on the distance of haul. The tonne-kilometer cost of trucking rises much more quickly with distance than it does the cost of a cargo airship. At some distance, the two modes are direct substitutes. The costs of the Mexico-Canada refrigerated truck supply chain are compared with the costs of a 100t-lift, electrically-powered airship. The flight characteristics of the Hindenburg Zeppelin are used as a model for a modern cargo airship. The supply chain cost of trucking tomatoes is used to test the theorical proposition. The cost difference works out to about US10￠/kg (5￠/lb) advantage for trucking Mexican tomatoes to Canada. However, this cost disadvantage of the airship could be made up by their vibrationless ride, better air circulation and one-day service versus four days by truck. This alternative form of transportation could have a positive impact on worldwide north-south distribution of food. Airships can overcome trade barriers and distance to open new markets for perishable food exports. In addition, they would reduce the carbon emissions of transport. Canada imports 160,000 refrigerated truckloads of fruits and vegetables by from the southern US and Mexico. With an average driving distance of 3,000 km, these trucks emit 606,000 MT of CO2 annually. Airships powered by hydrogen fuel cells would have zero-carbon emissions. Markets are not yet incorporating the environmental advantage of airships in any freight comparison, but inevitably this will be important.

Excessive Drowsiness among Truck Drivers in Benin in 2023: Associated Factors and Risk of Crashes Occurrence

Introduction: Over-drowsiness is a condition with serious consequences, including road accidents. The condition, however, is often ignored both by carers as well as victims themselves. The aim of the present study was to investigate the factors associated with excessive drowsiness in Cotonou, Benin 2023, along with its influence on the occurrence of crashes among truck drivers. Methods: This was a descriptive and analytical cross-sectional study, held from March 13 to April 10, 2023, focusing on large truck drivers over 18 years of age, selected by convenience from parking lots in and around the city of Cotonou. Data collected using questionnaires on socio-demographic and behavioral factors, sleeping habits and working conditions were processed using Stata 15.0 software. Excessive drowsiness was defined by a score above 10 on the Epworth scale. Associated factors were found by multiple logistic regression, at a threshold of 0.05. Results: Altogether 304 drivers, all male and aged 35.98 ± 8.42 years, were surveyed. The prevalence of excessive drowsiness was 29.2%. The associated factors identified were not practicing sport OR = 2.27, CI95% = [1.33;3.86], p = 0,002;sleep duration per working day OR = 1.82;CI95% = [1.06;3.11], p = 0,027 and average distance travelled per day OR = 3.40;CI95% = [1.53;7.56], p = 0,003. Excessive drowsiness was associated with a 1.73-fold increased risk of road accidents (CI95% [1.04;2.87];p = 0.03). Conclusion: Communicating excessive drowsiness and its associated factors to all the stakeholders in the haulage chain is essential to help prevent road accidents.

A comparative study on kinetics and dynamics of two dump truck lifting mechanisms using MATLAB simscape

In this paper,two lifting mechanism models with opposing placements,which use the same hydraulic hoist model and have the same angle of 50°,have been developed.The mechanical and hydraulic simulation models are established using MATLAB Simscape to analyze their kinetics and dynamics in the lifting and holding stages.The simulation findings are compared to the analytical calculation results in the steady state,and both methods show good agreement.In the early lifting stage,Model 1 produces greater force and discharges goods in the container faster than Model 2.Meanwhile,Model 2 reaches a higher force and ejects goods from the container cleaner than its counterpart at the end lifting stage.The established simulation models can consider the effects of dynamic loads due to inertial moments and forces generated during the system operation.It is crucial in studying,designing,and optimizing the structure of hydraulic-mechanical systems.

Quantifying the Impact of In-Cab Alerts on Truck Speed Reductions in Ohio

In-cab alerts warn commercial vehicle drivers of upcoming roadway incidents, slowdowns and work zone construction activities. This paper reports on a study evaluating the driver response to in-cab alerts in Ohio. Driver response was evaluated by measuring the statistical trends of vehicle speeds after the in-cab alerts were received. Vehicle speeds pre and post in-cab alert were collected over a 47 day period in the fall of 2023 for trucks traveling on interstate roadways in Ohio. Results show that approximately 22% of drivers receiving Dangerous Slowdown alerts had reduced their speeds by at least 5 mph 30 seconds after receiving such an alert. Segmenting this analysis by speed found that of vehicles traveling at or above 70 mph at the time of alerting, 26% reduced speeds by at least 5 mph. These speed reductions suggest drivers taking actional measures after receiving alerts. Future studies will involve further analysis on the impact of the types of alerts shown, roadway characteristics and overall traffic conditions on truck speeds passing through work zones.

Seroprevalence Survey of HIV and Hepatitis B Virus and Behavioral Characteristics among Heavy Truck Drivers along Port Sudan-Khartoum Highways

The prevalence of human immunodeficiency virus (AIDS) and hepatitis B virus among heavy truck drivers and their assistants has been well documented globally in correlation with their behavioral characteristics. The present study aimed to screen for human immunodeficiency virus (HIV), hepatitis B virus (HBV), and behavioral characteristics among heavy truck drivers in Port Sudan. A cross-sectional study was conducted on 274 heavy truck drivers and their assistants who used the highway Port Sudan-Khartoum in Port Sudan city during 2019-2021. Data on behavioral characteristics and substance use habits were collected using a structured questionnaire, and an ELISA test was used to screen for HIV and HBV infections in the study participants. The chi-square test, odds ratio, and confidence intervals were used to find the association between behavioral characteristics and seropositive HIV/HBV. Of the 274 enrolled participants, the seroprevalence rates of HIV were 2.7% and HBV was 23.7%. Ninety-four (34.3%) of them had a history of high-risk sexual behavior outside of marriage;only two (0.7%) used condoms;14.2% of participants reported alcohol use;and 1.1% reported drug use. Univariate analysis revealed that having a sex history outside of marriage with ≥1 sex partner and never using a condom with a spouse or casual partner were significant risk factors for HIV and HBV among drivers. Fortunately, we found that most of the drivers reported low alcohol and drug use. Concerning this study, the seroprevalence of HIV and HBV is highly associated with a history of having sex outside of marriage and sexual behavior among truck drivers and assistances. Additional studies are needed to further investigate other STIs and behavioral characteristics associated with factors in truck drivers/assistance in different truck stop regions in Sudan.

A Predictive Energy Management Strategies for Mining Dump Trucks

The plug-in hybrid vehicles(PHEV)technology can effectively address the issues of poor dynamics and higher energy consumption commonly found in traditional mining dump trucks.Meanwhile,plug-in hybrid electric trucks can achieve excellent fuel economy through efficient energy management strategies(EMS).Therefore,a series hybrid system is constructed based on a 100-ton mining dump truck in this paper.And inspired by the dynamic programming(DP)algorithm,a predictive equivalent consumption minimization strategy(P-ECMS)based on the DP optimization result is proposed.Based on the optimal control manifold and the SOC reference trajectory obtained by the DP algorithm,the P-ECMS strategy performs real-time stage parameter optimization to obtain the optimal equivalent factor(EF).Finally,applying the equivalent consumption minimization strategy(ECMS)realizes real-time control.The simulation results show that the equivalent fuel consumption of the P-ECMS strategy under the experimentally collected mining cycle conditions is 150.8 L/100 km,which is 10.9%less than that of the common CDCS strategy(169.3 L/100 km),and achieves 99.47%of the fuel saving effect of the DP strategy(150 L/100 km).

基于TruckSim矿用汽车转向工况侧倾运动特性分析

车辆发生转向时,由于离心力的作用而产生侧倾运动,空载高速转向时该部分作用将更为明显,进而影响车辆平稳运输。根据悬挂系统的特性差异,对所研究矿用汽车前后悬挂的侧倾中心和侧倾轴进行分析;基于以上分析,对转向时的侧倾运动进行分析,获取关键参数的变化模型;根据理论分析结果,基于Matlab/Simulink建立车辆转向工况表征侧倾运动的分析模型;根据悬挂特性和转向特性,分别建立分析模型,与车辆多体动力学模型联合,基于TruckSim建立整车转向特征分析模型;分析在固定转向盘稳态回转试验时,车辆的行驶轨迹;对空载高速转向工况下,车辆内外轮转角特征曲线,悬挂刚度、位移、侧倾刚度等参数变化进行分析;对比分析考虑转向侧倾与否的转角特征及偏差与理论分析之间的差异,以验证分析的可靠性。结果可知:车辆内外侧悬挂缸出现伸缩跳动,此时出现了附加转向效应叠加在车轮上;车轮需要较大的侧偏角,满足侧向力的需要;此时,整车的转向角关系不单单满足Ackerman定理,还增加了轮胎的侧偏角;未考虑转向侧倾时,转角偏差值随着转角的增加而不断增大,最大偏差达到了0.4223°,而考虑时,转角偏差的目标值为0.3618°。因此表明,所建立的分析模型具有较好的分析结果,能够更精确的反应车辆转向过程中,侧倾运动各部分参数的变化,为此类研究提供参考。

Classifying wakes produced by self-propelled fish-like swimmers using neural networks

We consider the classification of wake structures produced by self-propelled fish-like swimmers based on local measurements of flow variables.This problem is inspired by the extraordinary capability of animal swimmers in perceiving their hydrodynamic environments under dark condition.We train different neural networks to classify wake structures by using the streamwise velocity component,the crosswise velocity component,the vorticity and the combination of three flow variables,respectively.It is found that the neural networks trained using the two velocity components perform well in identifying the wake types,whereas the neural network trained using the vorticity suffers from a high rate of misclassification.When the neural network is trained using the combination of all three flow variables,a remarkably high accuracy in wake classification can be achieved.The results of this study can be helpful to the design of flow sensory systems in robotic underwater vehicles.

Where is the rudder of a fish?:the mechanism of swimming and control of self-propelled fish school

Numerical simulation and control of self- propelled swimming of two- and three-dimensional biomimetic fish school in a viscous flow are investigated. With a parallel computational fluid dynamics package for the two- and three-dimensional moving boundary problem, which combines the adaptive multi-grid finite volume method and the methods of immersed boundary and volume of fluid, it is found that due to the interactions of vortices in the wakes, without proper control, a fish school swim with a given flap- ping rule can not keep the fixed shape of a queue. In order to understand the secret of fish swimming, a new feedback con- trol strategy of fish motion is proposed for the first time, i,e., the locomotion speed is adjusted by the flapping frequency of the caudal, and the direction of swimming is controlled by the swinging of the head of a fish. Results show that with this feedback control strategy, a fish school can keep the good order of a queue in cruising, turning or swimming around circles. This new control strategy, which separates the speed control and direction control, is important in the construction of biomimetic robot fish, with which it greatly simplifies the control devices of a biomimetic robot fish.

Comparison of Microbubble and Air Layer Injection with Porous Media for Drag Reduction on a Self-propelled Barge Ship Model

Ship resistance issues are related to fuel economy,speed,and cost efficiency.Air lubrication is a promising technique for lowering hull frictional resistance as it is supposed to modify the energy in the turbulent boundary layer and thereby reduce hull friction.In this paper,the objective is to identify the optimum type of air lubrication using microbubble drag reduction(MBDR)and air layer drag reduction(ALDR)techniques to reduce the resistance of a 56-m Indonesian self-propelled barge(SPB).A model with the following dimensions was constructed:length L=2000 mm,breadth B=521.60 mm,and draft T=52.50 mm.The ship model was towed using standard towing tank experimental parameters.The speed was varied over the Froude number range 0.11–0.31.The air layer flow rate was varied at 80,85,and 90 standard liters per minute(SLPM)and the microbubble injection coefficient over the range 0.20–0.60.The results show that the ship model using the air layer had the highest drag reduction up to a maximum of 90%.Based on the characteristics of the SPB,which operates at low speed,the optimum air lubrication type to reduce resistance in this instance is ALDR.

A comparative study of the self-propelled jumping capabilities of coalesced droplets on RTV surfaces and superhydrophobic surfaces

Understanding the mechanism of coalescence-induced self-propelled jumping behavior provides distinct insights in designing and optimizing functional coatings with self-cleaning and anti-icing properties.However,to date self-propelled jumping phenomenon has only been observed and studied on superhydrophobic surfaces,other than those hydrophobic surfaces with weaker but fairish water-repellency,for instance,vulcanized silicon rubber(RTV) coatings.In this work,from the perspective of thermodynamic-based energy balance aspect,the reason that self-propelled jumping phenomenon does not happen on RTV coatings is studied.The apparent contact angles of droplets on RTV coatings can be less than the theoretical critical values therefore cannot promise energy surplus for the coalesced droplets onside.Besides,on RTV and superhydrophobic surfaces,the droplet-size dependent variation characteristics of the energy leftover from the coalescence process are opposite.For the droplets coalescing on RTV coatings,the magnitudes of energy dissipations are more sensitive to the increase in droplet size,compared to that of released surface energy.While for superhydrophobic coatings,the energy generated during the coalescence process can be more sensitive than the dissipations to the change in droplet size.

An Operational Modal Analysis Experimental Technique for Self-propelled Gun

The experimental modal analysis of the selected self-propelled gun was completed to obtain its modal frequency distribution and modes by using an operational modal analysis experimental technique.The result obtained by the method was compared with that obtained by the traditional method.It indicates that the two results are in good agreement.

Ratchet transport of self-propelled chimeras in an asymmetric periodic structure

We studied the rectified transport of underdamped particles subject to phase lag in an asymmetric periodic structure.When the inertia effect is considered,it is possible to observe reversals of the average velocity with small self-propelled force,whereas particles always move in the positive direction with large self-propelled force.The introduction of phase lag leads particles to follow circular orbits and suppress the polar motion.In addition,this can adjust the direction of particle motion.There exists an optimal value of polar interaction strength at which the rectification is maximal.These results open the way for many application processes,such as spatial sorting of particles mixture and separation based on their physical properties.

Nonvanishing optimal noise in cellular automaton model of self-propelled particles

A minimal cellular automaton model is introduced to describe the collective motion of self-propelled particles on two-dimensional square lattice. The model features discretization of directional and positional spaces and single-particle occupation on one lattice site. Contrary to the Vicsek model and its variants, our model exhibits the nonvanishing optimal noise. When the particle density increases, the collective motion is promoted with optimal noise strength and reduced with noise strength out of optimal region. In addition, when the square lattice undergoes edge percolation process, no abrupt change of alignment behaviors is observed at the critical point of percolation.

Dynamics of a self-propelled particle under different driving modes in a channel flow

In this paper, a model that combines the lattice Boltzmann method with the singularity distribution method is proposed to simulate a self-propelled particle swimming（exhibiting translation and rotation） in a channel flow. The results show that the velocity distribution for a self-propelled particle swimming deviates from a Maxwellian distribution and exhibits highvelocity tails. The influence of an eccentric potential doublet on the translation velocity of the particle is significant. The velocity decay process can be described using a double exponential model form. No large differences in the velocity distribution were observed for different translation Reynolds numbers, rotation Reynolds numbers, or regular intervals.

Effect of the structure of backward orifices on thejet performance of self-propelled nozzles

Self-propelled nozzle is a critical component of the radial jet drilling technology.Its backward orifice structure has a crucial influence on the propulsive force and the drilling performance.To improve the working performance of the nozzle,the numerical simulation model is built and verified by the experimental results of propulsive force.Then the theoretical model of the energy efficiency and energy coefficient of the nozzle is built to reveal the influence of the structural parameters on the jet performance of the nozzle.The results show that the energy efficiency and energy coefficient of the backward orifice increase first and then decrease with the angle increases.The energy coefficient of forward orifice is almost constant with the angle increases.With the increase in the number and diameter,energy efficiency and energy coefficient of the forward orifice gradually decrease,but the backward orifice energy coefficient first increases and then decreases.Finally,it is obtained that the nozzle has better jet performance when the angle of backward orifice is 30°,the number of backward orifice is 6,and the value range of diameter is 2-2.2 mm.This study provides a reference for the design of efficiently self-propelled nozzle for radial jet drilling technology.

Traction Potential Analysis of Self-Propelled Seafloor Trencher Based on Mechanical Measurements in Bentonite Soil

Shear stress-displacement relationship model of soil is very important to predict the tractive performance of tracked vehicle. Most shear stress-displacement models were proposed for terrestrial field.However,they are not suit for soft seafloor with flow surface and high water content. Based on comprehensive analysis of seafloor soil shear deformation and track segment shear tests,a new empirical model of shear stressdisplacement relationship for saturated soft-plastic soil(SSP model) was proposed. To validate the SSP model and evaluate potential tractive force of self-propelled seafloor trencher,a test platform,where track segment shear test and drawbar pull test can be performed in seafloor soil substitute(bentonite water mixture),was built. Series of shear tests were carried out. Test results show that the SSP model can describe the mechanical behavior of track segment in seafloor soil substitute with good approximation. Through analyzing the main external forces,including environmental loads from seafloor soil and sea current applied to seafloor tracked trencher during the trenching process in a straight line,drawbar pull analysis model was deduced with the SSP model. A scale test model of seafloor tracked trencher was built,and the verification tests for drawbar pull analysis model were designed and carried out. Results of verification tests indicate that the drawbar pull analysis model was feasible and effective. The drawbar pull tests also indicated that the SSP model is valid from another side.