In this paper, an artificial neural network method that can predict the chemical composition of deposited weld metal by CO 2 Shielded Flux Cored Wire Surfacing was studied. It is found that artificial neural networ...In this paper, an artificial neural network method that can predict the chemical composition of deposited weld metal by CO 2 Shielded Flux Cored Wire Surfacing was studied. It is found that artificial neural network is a good approach on studying welding metallurgy processes that cannot be described by conventional mathematical methods. In the same time we explored a new way to study the no equilibrium welding metallurgy processes.展开更多
Self-shielded flux-cored wire is a convenient and efficient consumable for pipeline field girth welding because of its self-protection characteristic and high deposition rate, especially for remote construction sites ...Self-shielded flux-cored wire is a convenient and efficient consumable for pipeline field girth welding because of its self-protection characteristic and high deposition rate, especially for remote construction sites in rugged terrain. From the perspective of pipeline safety, the impact toughness of the girth welds is an important factor in pipeline integrity ,which determines the crack arrest behavior in the girth welds. Therefore, improving the girth weld impact toughness is of primary importance in the field of pipeline girth welding. Three self-shielded flux-cored wires comprising different chemical composition systems have been applied to large diameter X80 UOE （U-ing-O- ing-Expanding） pipeline semi-automatic girth welding,and the impact toughness of the welds has been evaluated by girth weld chemical composition analysis and microstructural analysis using scanning electron microscopy （SEM） and energy dispersive spectrometry （EDS） to investigate pipeline girth weld impact toughness and find ways to improve it. This helps in determining the main factors that influence girth weld impact toughness. Pipeline girth weld impact toughness is mainly determined by the final microstructure produced in the solid-state phase transition. In the as-weld state,acicular ferrite （AF） and fine bainite （FB） are a benefit to the impact toughness. For multilayer semiautomatic self-shielded flux-cored wire welding, the normalizing and tempering function of the latter beads to the initial beads plays an important role in the transition of girth weld microstructure, which affects the impact toughness. The original AF and FB and the corresponding heat treatment microstructure of the fine and uniform block ferrite and pearlite result in very good impact toughness. The following two mechanisms are found to promote the production of AF and FB in the girth weld. First, elements promoting the broadening of the austenitic region, such as Ni, C, Cu, and Mn, induce low temperature phase transitions and restrain the opposing function of Al, which is a benefit to the production of AF and FB. Second, dispersed high-melting-point inclusions, especially Al2O3 ,induce the nucleated production of AF. The advantageous function of inclusions is determined by their shape, distribution, and dimension. Dispersed spherical inclusions of small dimension are a benefit to the production of AF, and result in good impact toughness.展开更多
The effects of process parameters on the depth-to-width ratio （D/W） of flux-cored wire underwater wet welding with a certain type of homemade .flux-cored wire are studied. It is found that the welding .speed, wire f...The effects of process parameters on the depth-to-width ratio （D/W） of flux-cored wire underwater wet welding with a certain type of homemade .flux-cored wire are studied. It is found that the welding .speed, wire feeding speed and torch oscillating amplitude hare significant effects on the dopth-to-width ratio （D/W） of welds. The D/W ratio of welds increases significantly with the increase of welding speed without the oscillating of welding torch. It increased （from 0. 14 to 0. 26 ） with the increase of wire feeding speed while the torch oscillating. And it decreased linearly with the increase of torch oscillating amplitude. However, the influelwe of oscillating speed, wire extension and welding voltage on the D/W ratio of welds was not obvious.展开更多
This paper puts forward a new method to achieve flux cored wire TIG welding and uses high-speed photography to analyze the droplet transfer behavior and forces acting on the droplet. The droplet transfer forms include...This paper puts forward a new method to achieve flux cored wire TIG welding and uses high-speed photography to analyze the droplet transfer behavior and forces acting on the droplet. The droplet transfer forms include bridging transfer, slag column guided transfer, and non-contact transfer; each of these forms may be observed as the melting position of the welding wire changes. The important role of surface tension in the process of droplet transfer is proposed using static force balance theory and pinch instability theory. The phenomenon of droplet backward swing during welding process could be attributed to the vapor recoil force produced by vapors from the droplet. The welding experiments show that the proposed welding process is stable and that the weld quality produced is good.展开更多
According to the characteristics of electric arc spraying technology and abrasion of boiler piping,a flux cored wire SMD 45 for electric arc spraying is developed The experimental results show that the surface hardn...According to the characteristics of electric arc spraying technology and abrasion of boiler piping,a flux cored wire SMD 45 for electric arc spraying is developed The experimental results show that the surface hardness of the coating reaches 60～65 HR and the adhesive strength between the coating and base is 23～28 MPa The wearability of the coating sprayed by the wire is 5 times than that of ordinary steel pipe Applying the wire to the heated surface,the life of the economizer pipe is doubly increased No local desquamation,rust and abrasion can be examined during more than one year's service.展开更多
Effects of CeF3 on properties of self-shielded flux cored wire including welding process, inclusions in weld metal and mechanical properties are systematically studied. Welding smoke and spatter are reduced with the a...Effects of CeF3 on properties of self-shielded flux cored wire including welding process, inclusions in weld metal and mechanical properties are systematically studied. Welding smoke and spatter are reduced with the addition of CeF3. The main non-metallic inclusions in weld metal are AlN and Al2O3. CeF3 can refine non-metallic inclusions and reduce the amount of large size inclusions, which is attributed to the inclusion floating behavior during the solidification of weld metal. The low temperature impact toughness is improved by adding suitable amount of CeF3 in the flux.展开更多
Caterpillar construction machines play an important part in many fields such as hydraulic and electric engineering, the construction of highway, for its particular of structure. The walking system of caterpillar const...Caterpillar construction machines play an important part in many fields such as hydraulic and electric engineering, the construction of highway, for its particular of structure. The walking system of caterpillar construction machines is always under the condition of three-body abrasive wear. The abrasive wear of walking system is very severe, which always results in damages of components or structures of walking system of caterpillar construction machines. It is very important to repair the walking system by cladding technique. The abrasive wear properties of four kinds coatings produced by the shielded flux-cored wire surfacing for the repair of the damaged components of walking system of caterpillar construction machines have been studied experimentally on an MLS-23 type wet sand rubber wheel abrasive tester. The surfaces morphologies of the abrasively worn specimens and their microstructures are investigated by transmitting electron microscopy (TEM) after wear testing. Results show that the wear mechanism of cladding metals of the flux-cored wire No.1 and the No.2 is micro-cutting while that of the No.3 and the No.4 is micro-ploughing. The four kinds of flux-cored wire coatings present great potential applications for the repairing of caterpillar construction machines in the Three Gorges Engineering.展开更多
Metal transfer behavior of six kinds of self shielded flux cored wire(SSFCW) is studied using the apparatus of SSFCW high speed photography self made. Six kinds of metal transfer modes of SSFCW were obtained throu...Metal transfer behavior of six kinds of self shielded flux cored wire(SSFCW) is studied using the apparatus of SSFCW high speed photography self made. Six kinds of metal transfer modes of SSFCW were obtained through observation for high speed photograph film and analysis. It is believed that the research is of magnificent for improving operative performance and mechanical properties of SSFCW and dynamics characteristic of welding power.展开更多
The effect of Fe203 and Liz CO3 additives in flux core on the weld metal oxygen content and weld penetration in self-shielded flux cored arc welding were studied schematically. The result shows that the oxygen content...The effect of Fe203 and Liz CO3 additives in flux core on the weld metal oxygen content and weld penetration in self-shielded flux cored arc welding were studied schematically. The result shows that the oxygen content in the weld metal and weld penetration both increased with the Fe203 addition increased in the range of 5 wt. % to 20 wt. %. The oxygen content in the weld metal was increased with the Li2CO3 addition increased in the range of 1 wt. % to 8 wt. %. However, the weld penetration decreased when Li2CO3 addition exceeding 4 wt. %. High-speed photographic images show that when Fe2O3 addition influx core exceeding 15 wt. %, droplet became excessively large, so that spatters were frequently generated in large numbers. In this study, Fe203 and Li2 CO3 in the amount of 11 wt. % and 4 wt. %, respectively, jointly added in the flux core can achieve a deeper weld penetration with sound usability characteristics.展开更多
Prevention of nitrogen porosity in weld metal deposited with self-shielded flux cored wire with CaF2-TiO2-MgO slag system can be accomplished by using a 'killing agent' such as titanium to react with nitrogen ...Prevention of nitrogen porosity in weld metal deposited with self-shielded flux cored wire with CaF2-TiO2-MgO slag system can be accomplished by using a 'killing agent' such as titanium to react with nitrogen dissolved in the weld metal. The amount of titanium needed to prevent porosity is calculated thermodynamically for various dissolved nitrogen levels. Experimental flux cored wires are used to verify the thermodynamic model. It is concluded that approximately 0.11 wt% titanium in the weld deposit is need to prevent nitrogen porosity when welding without externally applied shielding.展开更多
文摘In this paper, an artificial neural network method that can predict the chemical composition of deposited weld metal by CO 2 Shielded Flux Cored Wire Surfacing was studied. It is found that artificial neural network is a good approach on studying welding metallurgy processes that cannot be described by conventional mathematical methods. In the same time we explored a new way to study the no equilibrium welding metallurgy processes.
文摘Self-shielded flux-cored wire is a convenient and efficient consumable for pipeline field girth welding because of its self-protection characteristic and high deposition rate, especially for remote construction sites in rugged terrain. From the perspective of pipeline safety, the impact toughness of the girth welds is an important factor in pipeline integrity ,which determines the crack arrest behavior in the girth welds. Therefore, improving the girth weld impact toughness is of primary importance in the field of pipeline girth welding. Three self-shielded flux-cored wires comprising different chemical composition systems have been applied to large diameter X80 UOE （U-ing-O- ing-Expanding） pipeline semi-automatic girth welding,and the impact toughness of the welds has been evaluated by girth weld chemical composition analysis and microstructural analysis using scanning electron microscopy （SEM） and energy dispersive spectrometry （EDS） to investigate pipeline girth weld impact toughness and find ways to improve it. This helps in determining the main factors that influence girth weld impact toughness. Pipeline girth weld impact toughness is mainly determined by the final microstructure produced in the solid-state phase transition. In the as-weld state,acicular ferrite （AF） and fine bainite （FB） are a benefit to the impact toughness. For multilayer semiautomatic self-shielded flux-cored wire welding, the normalizing and tempering function of the latter beads to the initial beads plays an important role in the transition of girth weld microstructure, which affects the impact toughness. The original AF and FB and the corresponding heat treatment microstructure of the fine and uniform block ferrite and pearlite result in very good impact toughness. The following two mechanisms are found to promote the production of AF and FB in the girth weld. First, elements promoting the broadening of the austenitic region, such as Ni, C, Cu, and Mn, induce low temperature phase transitions and restrain the opposing function of Al, which is a benefit to the production of AF and FB. Second, dispersed high-melting-point inclusions, especially Al2O3 ,induce the nucleated production of AF. The advantageous function of inclusions is determined by their shape, distribution, and dimension. Dispersed spherical inclusions of small dimension are a benefit to the production of AF, and result in good impact toughness.
文摘The effects of process parameters on the depth-to-width ratio （D/W） of flux-cored wire underwater wet welding with a certain type of homemade .flux-cored wire are studied. It is found that the welding .speed, wire feeding speed and torch oscillating amplitude hare significant effects on the dopth-to-width ratio （D/W） of welds. The D/W ratio of welds increases significantly with the increase of welding speed without the oscillating of welding torch. It increased （from 0. 14 to 0. 26 ） with the increase of wire feeding speed while the torch oscillating. And it decreased linearly with the increase of torch oscillating amplitude. However, the influelwe of oscillating speed, wire extension and welding voltage on the D/W ratio of welds was not obvious.
基金supported by the National Natural Science Foundation of China(No.51175374)the Natural Science Foundation of Tianjin(No.16JCZDJC38700)
文摘This paper puts forward a new method to achieve flux cored wire TIG welding and uses high-speed photography to analyze the droplet transfer behavior and forces acting on the droplet. The droplet transfer forms include bridging transfer, slag column guided transfer, and non-contact transfer; each of these forms may be observed as the melting position of the welding wire changes. The important role of surface tension in the process of droplet transfer is proposed using static force balance theory and pinch instability theory. The phenomenon of droplet backward swing during welding process could be attributed to the vapor recoil force produced by vapors from the droplet. The welding experiments show that the proposed welding process is stable and that the weld quality produced is good.
文摘According to the characteristics of electric arc spraying technology and abrasion of boiler piping,a flux cored wire SMD 45 for electric arc spraying is developed The experimental results show that the surface hardness of the coating reaches 60～65 HR and the adhesive strength between the coating and base is 23～28 MPa The wearability of the coating sprayed by the wire is 5 times than that of ordinary steel pipe Applying the wire to the heated surface,the life of the economizer pipe is doubly increased No local desquamation,rust and abrasion can be examined during more than one year's service.
文摘Effects of CeF3 on properties of self-shielded flux cored wire including welding process, inclusions in weld metal and mechanical properties are systematically studied. Welding smoke and spatter are reduced with the addition of CeF3. The main non-metallic inclusions in weld metal are AlN and Al2O3. CeF3 can refine non-metallic inclusions and reduce the amount of large size inclusions, which is attributed to the inclusion floating behavior during the solidification of weld metal. The low temperature impact toughness is improved by adding suitable amount of CeF3 in the flux.
文摘Caterpillar construction machines play an important part in many fields such as hydraulic and electric engineering, the construction of highway, for its particular of structure. The walking system of caterpillar construction machines is always under the condition of three-body abrasive wear. The abrasive wear of walking system is very severe, which always results in damages of components or structures of walking system of caterpillar construction machines. It is very important to repair the walking system by cladding technique. The abrasive wear properties of four kinds coatings produced by the shielded flux-cored wire surfacing for the repair of the damaged components of walking system of caterpillar construction machines have been studied experimentally on an MLS-23 type wet sand rubber wheel abrasive tester. The surfaces morphologies of the abrasively worn specimens and their microstructures are investigated by transmitting electron microscopy (TEM) after wear testing. Results show that the wear mechanism of cladding metals of the flux-cored wire No.1 and the No.2 is micro-cutting while that of the No.3 and the No.4 is micro-ploughing. The four kinds of flux-cored wire coatings present great potential applications for the repairing of caterpillar construction machines in the Three Gorges Engineering.
文摘Metal transfer behavior of six kinds of self shielded flux cored wire(SSFCW) is studied using the apparatus of SSFCW high speed photography self made. Six kinds of metal transfer modes of SSFCW were obtained through observation for high speed photograph film and analysis. It is believed that the research is of magnificent for improving operative performance and mechanical properties of SSFCW and dynamics characteristic of welding power.
文摘The effect of Fe203 and Liz CO3 additives in flux core on the weld metal oxygen content and weld penetration in self-shielded flux cored arc welding were studied schematically. The result shows that the oxygen content in the weld metal and weld penetration both increased with the Fe203 addition increased in the range of 5 wt. % to 20 wt. %. The oxygen content in the weld metal was increased with the Li2CO3 addition increased in the range of 1 wt. % to 8 wt. %. However, the weld penetration decreased when Li2CO3 addition exceeding 4 wt. %. High-speed photographic images show that when Fe2O3 addition influx core exceeding 15 wt. %, droplet became excessively large, so that spatters were frequently generated in large numbers. In this study, Fe203 and Li2 CO3 in the amount of 11 wt. % and 4 wt. %, respectively, jointly added in the flux core can achieve a deeper weld penetration with sound usability characteristics.
文摘Prevention of nitrogen porosity in weld metal deposited with self-shielded flux cored wire with CaF2-TiO2-MgO slag system can be accomplished by using a 'killing agent' such as titanium to react with nitrogen dissolved in the weld metal. The amount of titanium needed to prevent porosity is calculated thermodynamically for various dissolved nitrogen levels. Experimental flux cored wires are used to verify the thermodynamic model. It is concluded that approximately 0.11 wt% titanium in the weld deposit is need to prevent nitrogen porosity when welding without externally applied shielding.
