Self-repairing functionality and corrosion resistance of in-situ Mg-Al LDH film on Al-alloyed AZ31 surface

A novel Mg-Al LDH film was in-situ prepared hydrothermally in an alkaline aqueous solution on an Al-alloyed AZ31 substrate.The structural,chemical and functional characteristics of the film were explored by means of scanning electron microscope(SEM),X-ray diffraction(XRD),energy dispersive spectrometer(EDS),polarization curve,AC impedance and salt immersion tests,respectively.The anti-corrosion results indicated that the Mg-Al LDH film on the Al-alloyed AZ31 surface could effectively protect the AZ31 from corrosion attack even after 90 days of immersion in 3.5 wt.%NaCl solution.The protection performance is surprisingly better than most of the reported coatings on Mg alloys.More interestingly,when the Mg-Al LDH film was scratched,the exposed Al-alloyed surface might gradually release metal ions and re-generate dense LDH nano-sheets in the corrosive environment to inhibit the further corrosion there,exhibiting a self-repairing behavior.The combination of the benign long-term protection and desirable self-repairing performance in this new process of surface-alloying and LDH-formation may significantly extend the practical application of magnesium alloys.

Recent progress in self-repairing coatings for corrosion protection on magnesium alloys and perspective of porous solids as novel carrier and barrier

Featuring low density and high specific strength, magnesium(Mg) alloys have attracted wide interests in the fields of portable devices and automotive industry. However, the active chemical and electrochemical properties make them susceptible to corrosion in humid, seawater, soil,and chemical medium. Various strategies have revealed certain merits of protecting Mg alloys. Therein, engineering self-repairing coatings is considered as an effective strategy, because they can enable the timely repair for damaged areas, which brings about long-term protection for Mg alloys. In this review, self-repairing coatings on Mg alloys are summarized from two aspects, namely shape restoring coatings and function restoring coatings. Shape restoring coatings benefit for swelling, shrinking, or reassociating reversible chemical bonds to return to the original state and morphology when coatings broken;function self-repairing coatings depend on the release of inhibitors to generate new passive layers on the damaged areas. With the advancement of coating research and to fulfill the demanding requirements of applications, it is an inevitable trend to develop coatings that can integrate multiple functions(such as stimulus response, self-repairing, corrosion warning,and so on). As a novel carrier and barrier, porous solids, especially covalent organic frameworks(COFs), have been respected as the future development of self-repairing coatings on Mg alloys, due to their unique, diverse structures and adjustable functions.

New robust fault-tolerant controller for self-repairing flight control systems

A new robust fault-tolerant controller scheme integrating a main controller and a compensator for the self-repairing flight control system is discussed.The main controller is designed for high performance of the original faultless system.The compensating controller can be seen as a standalone loop added to the system to compensate the effects of fault guaranteeing the stability of the system.A design method is proposed using nonlinear dynamic inverse control as the main controller and nonlinear extended state observer-based compensator.The stability of the whole closed-loop system is analyzed.Feasibility and validity of the new controller is demonstrated with an aircraft simulation example.

Friction-reducing,Anti-wear and Self-repairing Properties of Sulfonated Graphene

The friction reducing properties of sulfonated graphene as a lubricating additive were investigated using a four-ball machine tester with high carbon chromium bearing steels GCr15（SAE52100） friction pairs. The microscopic morphology, elemental composition, and self-repairing properties were observed and analyzed by using scanning electronic microscopy（SEM）, X-ray diffraction（XRD） and digital microscopy. The relationships among sulfonated graphene ethanol solution concentration, friction coefficient, and abrasion loss were revealed. It was found that the optimal concentration of ethanol solution with the addition of sulfonated graphene was 0.15g/m L and the coefficient of friction was only 0.105 under certain condition. Then the stable chemical properties and good anti-corrosion properties of the metal-graphene layer were further confirmed using salt spray corrosion test. In summary, sulfonated graphene can be used as a new kind of self repairing additive, and it has excellent wear-resistant and self-repairing performances.

On the Survivability of Self-repairing Control System for a Hybrid Underwater Vehicle

A hybrid remotely operated underwater vehicle( HROV) capable of working to the full ocean depth has been developed. In order for the vehicle to achieve a certain survivability level,a self-repairing control system( SRCS) has been designed. It consists of two basic technologies,fault diagnosis and isolation( FDI) and reconfigurable control. For FDI,a model-based hierarchical fault diagnosis system is designed for the HROV. Then,control strategies which reconfigure the control system at intervals according to information from the FDI system are presented. Combining the two technologies,it can obtain the fundamental frame of SRCS for the HROV. Considering the hazardous underwater environment at the limiting depth and the hybrid operating modes,an assessment of the HROV's survivability is vitally needed before it enters operational service. This paper presents a new definition of survivability for underwater vehicles and develops a simple survivability model for the SRCS. As a result of survivability assessment for the SRCS,we are able to figure out the survivability of SRCS and make further optimization about it. The methodology developed herein is also applicable to other types of underwater vehicles.

Self-Repairing Membranes for Inflatable Structures Inspired by a Rapid Wound Sealing Process of Climbing Plants

A new self-repairing membrane for inflatable light weight structures such as rubber boats or Tensairity constructions is presented. Inspired by rapid self-sealing processes in plants, a thin soft cellular polyurethane foam coating is applied on the inside of a fabric substrate, which closes the fissure if the membrane is punctured with a spike. Experimental tests are carried out with a purpose built setup by measuring the air mass flow through a leak in a damaged membrane sample. It is shown that the weight per unit area of the self-repairing foam as well as the curing of the two component PU-foam under an overpressure influence the repair efficiency. Curing the foam under overpressure affects the relative density as well as the microstructure of the foam coatings. Maximal median repair efficiencies of 0.999 have been obtained with 0.16 g.cm 2 foam cured at 1 bar overpressure. These results suggest that the bio-inspired technique has the potential to extend the functional integrity of injured inflatable structures dramatically.

A self-repairing polymer-inorganic composite coating to enable high-performance Zn anodes for zinc-ion batteries

There are some critical issues hindering the practical applications of aqueous zinc-ion batteries(zIBs),although they possess high safety and low cost as one of promising energy storge devices,such as the Zn dendrite growth and the by-product of Zn_(4)SO_(4)(OH)_(6)-xH_(2)O(ZHS)resulted from some side reactions in a mild electrolyte.Herein,a compact and self-repairing solid electrolyte interface(SEl)film,as labeled the PVDF-Zn(TFSI)_(2)-ZHS coating[The PVDF and Zn(TFSI)_(2)are polyvinylidene fluoride and zinc bis(trifluoromethanesulfonyl)imide,respectively],which turns the in-situ generated ZHS into a beneficial ingredient onto the pre-coated PVDF-based composite coating layer containing Zn(TFSI)_(2),was designed and fabricated by a simple doctor blade method.It is shown that the SEl layer can effectively isolate Zn from the electrolyte and homogenize the Zn^(2+)flux,and thus effectively suppress side reactions and dendrites growth.Benefiting from the hybrid SEl layer,a symmetric cell exhibits a high cycling stability over 750h at 2.0 mA/cm^(2)and 2.0 mAh/cm^(2),and meanwhile,a full-cell,coupled with K^(+) pre-intercalationα-MnO_(2)(KMO)cathode,displays excellent rate performance,stable coulombic efficiency and an acceptable cycle life.This work provides a feasible approach for simple and scalable modification of Zn anodes to achieve high performance.

Emerging Trends in Damage Tolerance Assessment:A Review of Smart Materials and Self-Repairable Structures

The discipline of damage tolerance assessment has experienced significant advancements due to the emergence of smart materials and self-repairable structures.This review offers a comprehensive look into both traditional and innovative methodologies employed in damage tolerance assessment.After a detailed exploration of damage tolerance concepts and their historical progression,the review juxtaposes the proven techniques of damage assessment with the cutting-edge innovations brought about by smart materials and self-repairable structures.The subsequent sections delve into the synergistic integration of smart materials with self-repairable structures,marking a pivotal stride in damage tolerance by establishing an autonomous system for immediate damage identification and self-repair.This holistic approach broadens the applicability of these technologies across diverse sectors yet brings forth unique challenges demanding further innovation and research.Additionally,the review examines future prospects that combine advanced manufacturing processes with data-centric methodologies,amplifying the capabilities of these‘intelligent’structures.The review culminates by highlighting the transformative potential of this union between smart materials and self-repairable structures,promoting a sustainable and efficient engineering paradigm.

Research on Tribological Characteristics and Worn Surface Self-Repairing Performance of Nano Attapulgite Powders Used in Lubricant Oil as Addictive

As a kind of natural nanometer materials,the attapulgite has been widely used in industry,agriculture,environment,food substance,medicament and many other fields.Few researches about attapulgite used in lubricant oil as additive were made,and those were only at a preliminary stage of exploration.The tribological characteristics of attapulgite powders with the different contents added to CD 15W/40 lubricant oil were researched through"plane-on-plane"configuration friction and wear tester,and the self-repairing performance of 45#steel worn surface was examined via ring-on-block configuration test.XRD,SEM,EDS,TEM were employed to analyze the surface morphologies and elementary composition of the samples'worn surface.Furthermore,wear self-repairing mechanism of attapulgite additive to lubricant oil was explored.The results showed that:the optimal content of attapulgite powders in oil CD 15W/40 was 0.5 wt%,and the stable friction coefficient can be reduced to 0.02,then the friction reduction performance can be enhanced by 82.5%;Smooth worn surface were formed of the chemical reaction film containing elements O,Si,Fe;Friction reduction and self-repairing mechanism had a relation with the crystal structure of attapulgite.

A shape memory scaffold for body temperature self-repairing wearable perovskite solar cells with efficiency exceeding 21%

Grain boundary cracks in flexible perovskite films can be repaired by filling with self-repairing polymers during the preparation and wearable operation.However,the self-repairing polymers are commonly active through external heating or humidification treatments,which cannot match with the human body's temperature tolerance of wearable devices.Herein,a body temperature-responsive shape memory polyurethane(SMPU)is demonstrated to achieve the real-time mechanical self-repairing of grain boundary cracks(~37°C).Furthermore,the strong intermolecular interaction between SMPU and the uncoordinated Pb2+and I−,can reduce the trap density in perovskite films.The blade-coated device achieves a power conversion efficiency(PCE)of 21.33%,which is among the best reported flexible perovskite solar cells(PSCs;0.10 cm2).Importantly,the device with SMPU can recover more than 80%of the PCE after 6000 cycles(bending radius:8 mm).Finally,the flexible PSCs are used for wearable solar power supply of a smartphone,which show great potential for self-repairing wearable electronics.

Technology of self-repairing and reinforcement of metal worn surface

Researches on self-repairing material （serpentine phyllosilicate） of our team in the past few years, such as ultrafining treatment, surface modification, self-repairing mechanism, the effect of rare metal on the self-repairing performance of serpentine, were introduced summarily. The phyllosilicate of serpentine shows excellent tribologi- cal and self-repairing performance for metal worn surface as additive in lubricant.

BOARD-LEVEL BUILT-IN SELF-REPAIR METHOD OF RAM

This paper describes the method of built-in self-repairing of RAM on board, designs hardware circuit, and logic for the RAM's faults self-repairing system based on FPGA. The key technology is that it utilizes FPGA to test RAM according to some algorithm to find out failure memory units and replace the faulty units with FPGA. Then it can build a memory that has no fault concern to external controller, and realizes the logic binding between external controller and RAM. Micro Controller Unit (MCU) can operate external RAM correctly even if RAM has some fault address units. Conventional MCS-51 is used to simulate the operation of MCU operating external memory. Simulation shows FPGA can complete the faulty address units' mapping and MCU can normally read and write external RAM. This design realizes the RAM's built-in self-repairing on board.

Plants as concept generators for biomimetic light-weight structures with variable stiffness and self-repair mechanisms

Plants possess many structural and functional properties that have a high potential to serve as concept generators for the production of biomimetic technical materials and structures. We present data on two features of plants (variable stiffness due to pressure changes in cellular structures and rapid self-repair functions) that may be used as models for biomimetic projects.

Elimination-Evolution Self-repair Method for Bio-inspired Electronic System

The existing self-repair methods,evolvable hardware and embryonic electronics( embryonics) are analyzed. Based on the advantages and disadvantages of the existing self-repair methods,a novel self-repair method named elimination-evolution self-repair method is proposed. The system can be repaired through elimination in real time and evolved to optimize the allocation of system resources with this method. The proposed self-repair method not only ensures the speed of the system's self-repair,but also makes full use of system resources to improve the system's self-repair capacity and provides a new self-repair approach for bio-inspired electronic system. In the end,the advantages of the proposed eliminationevolution self-repair method are verified through a simulation experiment.

Influence of Working Memory Capacity on the Frequency of Self-Repairs

This article explored the influence of working memory capacity on the frequency of self-repairs.The narrative task and listening span task were used.Twenty post-graduate students participated in this study.Overall,the results of this study illustrated that the working memory is a factor of self-repairs.Speakers who have higher working memory capacity produce lesser self-repairs.This finding provides teachers with a new insight into second language teaching;that is,teachers can improve the amount of lexical knowledge when teaching students who have lower working memory in order to help them produce more accurate language during the process of L2 speech production.

A multifunctional osteogenic system of ultrasonically spray deposited bone-active coatings on plasma-activated magnesium

Biomimetic bone-active coatings composed of inorganic nano-hydroxyapatite(i.e.,nHA)and organic silk fibroin(i.e.,SF)are layer-by-layer deposited on Mg-Zn-Ca alloy by a controllable ultrasonic spray method.Meanwhile,plasma activation is developed as a promising strategy to pretreat magnesium surfaces,which facilitates the direct adhesion of coatings with enhanced bonding interfaces.In this work,we engineer the nHA/SF composite coatings with excellent mechanical properties and adhesion force.The optimized parameters of ultrasonic spray bring significant influence on the surface morphologies of coatings.Assisted by hybrid plasma of oxygen and nitrogen(i.e.,O_(2)/N_(2) plasma),the activated Mg-Zn-Ca surfaces are uniformly covered by a robust and compact nHA/SF composite coating,establishing a multifunctional system with superior corrosion resistance and biological performance.Interestingly,secondary oxygen plasma treatment of nHA/SF coatings(A-nHA/SF)promotes the hydrophilicity,leading to a rapid self-repair effect from surface damage.The improvement of anti-corrosion and self-repair provides a dependable platform for better cell adhesion,proliferation,spreading and differentiation.These favorable factors contribute to the preferable in vivo biocompatibility and the promotion of newly formed bones for the A-nHA/SF-coated Mg implants.This study lays important foundations for coating strategy on biomedical magnesium alloy as multifunctional osteogenic system in bioactive implantable applications.

Pressure induced stability: from pneumatic structures to Tensairity~

Structural stabilization by a pressurized fluid is very common in nature, however hardly found in technology. Car tires, hot air balloons, airships and airhouses are among the few technical exceptions, which are stabilized by a compressed medium, typically air. Restricted by simple geometries and a very limited load bearing capacity these pneumatic structures could succeed only in very specialized applications. Nevertheless, prospective concepts ag has systematically investigated pneumatic structures during the last few years. As a major result, it was demonstrated that almost any shape can be made with pneumatic structures and that astonishing structures such as the pneumatic airplane Stingray can be realized even with low air pressure. On top of that, Airlight Ltd. in close collaboration with prospective concepts ag has recently developed the fundamental new structural concept Tensairity. The synergetic combination of an inflated structure with conventional structural elements such as cables and struts yields pneumatic light-weight structures with the load bearing capacity of steel girders. Thus, complex forms and high strength open up many new opportunities for pressure induced stability in technology. An overview of these recent developments is presented and the close relationship of pneumatic structures with biology is outlined.

CELLULAR SUBSTANCE EXUDATION AND SEED VIGOUR

In this paper, seeds of pinus koraiensis which has a characteristic of deep dormancy were selected as an experiment material, and the relation of cellular substance exudation to seed vigour is discussed based on the dormant state, the different measuring parts and the imbibed state of seeds before testing, as well as on the respiration of embryo and endosperm. The major measured results arc as follows: (1) After soaking for 24h, the dry embryo conductivity of sccdlot L is greater that than of sccdlot H: (2) The substance exudation of dry embryo of sccdlot H is less than that of sccdlot L; (3) After seeds imbibed, the substance exudation of dormant embryo of sccdlot H is more than that of sccdlot L; (4) After germination hastening treatment, the substance exudation of H embryos is greater than that of L embryos; (5) After artificially accelerated ageing treatment, the embryo conductivity of imbibed seeds has a positive correlation with seed vigour.

The Crack Self-healing Properties of Cement-based Material with EVA Heat-melt Adhesive

An experimental program was carried out to investigate whether EVA （ethylene vinyl acetate copolymer） heat-melt adhesive can potentially act as a self-healing agent in cement-based material. The effects of incorporation of EVA and heating on the properties of mortar were studied. Self-healing capacity of EVA specimens was also verified. The experimental results show that the addition of EVA would not greatly affect original characteristics of the matrix when EVA content was less than 5%; the interface between EVA and cement matrix was well improved after heating, which allows a significant improvement in flexural strength and toughness of specimen; pre-damaged specimens in various degrees （30%, 50% and 70%） were effectively repaired by EVA and the repair efficiency all exceeded 100%.

Fault self-repair strategy based on evolvable hardware and reparation balance technology

In the face of harsh natural environment applications such as earth-orbiting and deep space satellites, underwater sea vehicles, strong electromagnetic interference and temperature stress,the circuits faults appear easily. Circuit faults will inevitably lead to serious losses of availability or impeded mission success without self-repair over the mission duration. Traditional fault-repair methods based on redundant fault-tolerant technique are straightforward to implement, yet their area, power and weight cost can be excessive. Moreover they utilize all plug-in or component level circuits to realize redundant backup, such that their applicability is limited. Hence, a novel selfrepair technology based on evolvable hardware（EHW） and reparation balance technology（RBT） is proposed. Its cost is low, and fault self-repair of various circuits and devices can be realized through dynamic configuration. Making full use of the fault signals, correcting circuit can be found through EHW technique to realize the balance and compensation of the fault output-signals. In this paper, the self-repair model was analyzed which based on EHW and RBT technique, the specific self-repair strategy was studied, the corresponding self-repair circuit fault system was designed, and the typical faults were simulated and analyzed which combined with the actual electronic devices. Simulation results demonstrated that the proposed fault self-repair strategy was feasible. Compared to traditional techniques, fault self-repair based on EHW consumes fewer hardware resources, and the scope of fault self-repair was expanded significantly.