Automatic control technology is the basis of road robot improvement,according to the characteristics of construction equipment and functions,the research will be input type perception from positioning acquisition,real...Automatic control technology is the basis of road robot improvement,according to the characteristics of construction equipment and functions,the research will be input type perception from positioning acquisition,real-world monitoring,the process will use RTK-GNSS positional perception technology,by projecting the left side of the earth from Gauss-Krueger projection method,and then carry out the Cartesian conversion based on the characteristics of drawing;steering control system is the core of the electric drive unmanned module,on the basis of the analysis of the composition of the steering system of unmanned engineering vehicles,the steering system key components such as direction,torque sensor,drive motor and other models are established,the joint simulation model of unmanned engineering vehicles is established,the steering controller is designed using the PID method,the simulation results show that the control method can meet the construction path demand for automatic steering.The path planning will first formulate the construction area with preset values and realize the steering angle correction during driving by PID algorithm,and never realize the construction-based path planning,and the results show that the method can control the straight path within the error of 10 cm and the curve error within 20 cm.With the collaboration of various modules,the automatic construction simulation results of this robot show that the design path and control method is effective.展开更多
Identifying workers’construction activities or behaviors can enable managers to better monitor labor efficiency and construction progress.However,current activity analysis methods for construction workers rely solely...Identifying workers’construction activities or behaviors can enable managers to better monitor labor efficiency and construction progress.However,current activity analysis methods for construction workers rely solely on manual observations and recordings,which consumes considerable time and has high labor costs.Researchers have focused on monitoring on-site construction activities of workers.However,when multiple workers are working together,current research cannot accu rately and automatically identify the construction activity.This research proposes a deep learning framework for the automated analysis of the construction activities of multiple workers.In this framework,multiple deep neural network models are designed and used to complete worker key point extraction,worker tracking,and worker construction activity analysis.The designed framework was tested at an actual construction site,and activity recognition for multiple workers was performed,indicating the feasibility of the framework for the automated monitoring of work efficiency.展开更多
Food security is a strategic priority for a country’s economic development.In China,high-standard farmland construction(HSFC)is an important initiative to stabilize grain production and increase grain production capa...Food security is a strategic priority for a country’s economic development.In China,high-standard farmland construction(HSFC)is an important initiative to stabilize grain production and increase grain production capacity.Based on panel data from 31 sample provinces,autonomous regions,and municipalities in China from 2005–2017,this study explored the impact of HSFC on grain yield using the difference-in-differences(DID)method.The results showed that HSFC significantly increased total grain production,which is robust to various checks.HSFC increased grain yield through three potential mechanisms.First,it could increase the grain replanting index.Second,it could effectively reduce yield loss due to droughts and floods.Last,HSFC could strengthen the cultivated land by renovating the low-and medium-yielding fields.Heterogeneity analysis found that the HSFC farmland showed a significant increase in grain yield only in the main grain-producing areas and balanced areas.In addition,HSFC significantly increased the yields of rice,wheat,and maize while leading to a reduction in soybean yields.The findings suggest the government should continue to promote HSFC,improve construction standards,and strictly control the“non-agriculturalization”and“non-coordination”of farmland to increase grain production further.At the same time,market mechanisms should be used to incentivize soybean farming,improve returns and stabilize soybean yields.展开更多
The continuous progress of urbanization has driven the continuous development and innovation of landscape planning and design.Focused on the important design method of modern construction art,this study analyzed its c...The continuous progress of urbanization has driven the continuous development and innovation of landscape planning and design.Focused on the important design method of modern construction art,this study analyzed its concepts and characteristics,and made deep exploration to its application in landscape planning and design.The results indicated that modern construction art had a significant impact on landscape spatial planning and layout,spatial design forms,and spatial ornaments.The use of modern construction art concepts could make landscape design more scientific,artistic,and humane,creating higher quality leisure and entertainment venues for audiences.展开更多
Introduction: Work-related accidents are frequent and serious in the construction sector. The aim of the study was to determine the frequency and factors associated with occupational accidents on the construction site...Introduction: Work-related accidents are frequent and serious in the construction sector. The aim of the study was to determine the frequency and factors associated with occupational accidents on the construction site of a referral hospital in Benin. Methods: A cross-sectional study was carried out. The sample size was calculated using the Schwartz form adjusted for the number of workers on site and was 129 workers. Random sampling was used. The dependent variable was work-related accidents. The other variables were socio-demographic and occupational characteristics. Data were collected through a questionnaire survey. Medians and proportions were calculated. An association was sought using Chi-square and Fisher tests with a threshold of p Results: A total of 132 workers were included. Their median age was 30 years with an ITQ of [27 - 38];men were the most represented 126 (95.45%) with a level of education higher than or equal to high school in 101 (76.52%) and in the majority with a permanent status 85 (64.39%). Seniority of more than 5 years was observed in 92 (69.7%). Workers working more than 8 hours of overtime per week numbered 57 (43.18%). Exposure to vibrating objects was 49 (37.12%). In terms of psychosocial constraints, 82.58% had high psychological demands;79.53% low decision-making latitude;50.76% low social support. The frequency of work-related accidents was 6.82%, and the only associated factor was the type of worker (p = 0.016). On the other hand, there were 10.2% accidents among workers handling vibrating objects versus 4.98% among those not using them. With regard to psychosocial constraints, the following frequencies were recorded respectively: 6.42% among those with high psychological demand versus 8.7% among those with low psychological demand;7.62% among those with low decision-making latitude versus 3.7% among those with high decision-making latitude;8.96% among those with low social support versus 4.62% among those with high support. Conclusion: Work-related accidents on construction sites must be avoided by all possible means including the management of psychosocial constraints.展开更多
Structure-soil interface friction characteristics is of importance to investigate the interaction between engineering structures and soils,especially for offshore structures.The interface friction behavior between mar...Structure-soil interface friction characteristics is of importance to investigate the interaction between engineering structures and soils,especially for offshore structures.The interface friction behavior between marine clay and structural materials with different roughness was studied in this paper by using 3D optical scanning tests,a modified direct shear device and numerical simulation.Relationships between the surface roughness of structures,water content and interface friction angle were presented by model tests.The increase of water contents decreased the interface friction angles.For interfaces with different roughness,the interface friction angles will be smaller than that of the soil when the water content exceeds a certain value.The roughness of the interface and the water content of the soil are mutually coupled to influence the coefficient of friction(COF).This paper proposed a Finite Element Method(FEM)to simulate the interface direct shear tests of structures with different roughness.The surface models with different roughness are established based on the structure data obtained by 3D scanning.The Coupled Eulerian-Lagrangian(CEL)approach was employed to analyse soils sheared by irregular surfaces.The interface behavior for interfaces with different roughness under cyclic shear stresses was analyzed by FEM.展开更多
In the context of China’s economic development and population aging,the innovation and exploration of the old-age care model has emerged as a new community transformation and development direction.Given the differing...In the context of China’s economic development and population aging,the innovation and exploration of the old-age care model has emerged as a new community transformation and development direction.Given the differing needs and characteristics of individuals across the lifespan,it is evident that a design approach that incorporates mixed-age integration and mutual-help communities is a viable strategy for enhancing intergenerational exchanges.This entails the creation of a diverse and open community that is conducive to habitation for individuals of all ages,encompassing the full spectrum of needs,from those of young children to the elderly.Such a community must be designed and constructed with the population in mind,from the initial planning and design stages to the operational phase.This encompasses a comprehensive range of services,including food,clothing,housing,transportation,and medical care and recreation.展开更多
Taking the changes of construction land in Wan’an County over the years as the research object,the quantity and spatial characteristics of construction land in Wan’an County were analyzed,and the overall situation a...Taking the changes of construction land in Wan’an County over the years as the research object,the quantity and spatial characteristics of construction land in Wan’an County were analyzed,and the overall situation and regional differences of construction land utilization in Wan’an County were revealed.From the aspects of main influencing factors such as land use structure,land use intensity,land input intensity and output benefit,an evaluation indicator system was established to evaluate the economical and intensive use level of construction land in Wan’an County.The results show that the score of the economical and intensive use level of construction land in Wan’an County was 56.92,which was the lowest among all the districts and counties in Ji’an City.Based on the evaluation results,the corresponding economizing and intensive strategies were put forward,and the safeguard measures for its implementation were explored.The purpose is to provide some support for the preparation of territorial spatial planning,the delineation of urban development boundaries,and the potential exploitation of construction land stock,hoping to improve the utilization efficiency and benefit of construction land in Wan’an County,and promote the economic growth of Wan’an County to the stage of high-quality development.展开更多
This research is concentrated on the longitudinal vibration of a tapered pipe pile considering the vertical support of the surrounding soil and construction disturbance.First,the pile-soil system is partitioned into f...This research is concentrated on the longitudinal vibration of a tapered pipe pile considering the vertical support of the surrounding soil and construction disturbance.First,the pile-soil system is partitioned into finite segments in the vertical direction and the Voigt model is applied to simulate the vertical support of the surrounding soil acting on the pile segment.The surrounding soil is divided into finite ring-shaped zones in the radial direction to consider the construction disturbance.Then,the shear complex stiffness at the pile-soil interface is derived by solving the dynamic equilibrium equation for the soil from the outermost to innermost zone.The displacement impedance at the top of an arbitrary pile segment is obtained by solving the dynamic equilibrium equation for the pile and is combined with the vertical support of the surrounding soil to derive the displacement impedance at the bottom of the upper adjacent segment.Further,the displacement impedance at the pile head is obtained based on the impedance function transfer technique.Finally,the reliability of the proposed solution is verified,followed by a sensitivity analysis concerning the coupling effect of the pile parameters,construction disturbance and the vertical support of the surrounding soil on the displacement impedance of the pile.展开更多
Composite solid electrolytes(CSEs)have emerged as promising candidates for safe and high-energy–density solid-state lithium metal batteries(SSLMBs).However,concurrently achieving exceptional ionic conductivity and in...Composite solid electrolytes(CSEs)have emerged as promising candidates for safe and high-energy–density solid-state lithium metal batteries(SSLMBs).However,concurrently achieving exceptional ionic conductivity and interface compatibility between the electrolyte and electrode presents a significant challenge in the development of high-performance CSEs for SSLMBs.To overcome these challenges,we present a method involving the in-situ polymerization of a monomer within a self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZT)to produce the CSE.The synergy of the continuous conductive LLZT network,well-organized polymer,and their interface can enhance the ionic conductivity of the CSE at room temperature.Furthermore,the in-situ polymerization process can also con-struct the integration and compatibility of the solid electrolyte–solid electrode interface.The synthesized CSE exhibited a high ionic conductivity of 1.117 mS cm^(-1),a significant lithium transference number of 0.627,and exhibited electrochemical stability up to 5.06 V vs.Li/Li+at 30℃.Moreover,the Li|CSE|LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cell delivered a discharge capacity of 105.1 mAh g^(-1) after 400 cycles at 0.5 C and 30℃,corresponding to a capacity retention of 61%.This methodology could be extended to a variety of ceramic,polymer electrolytes,or battery systems,thereby offering a viable strategy to improve the electrochemical properties of CSEs for high-energy–density SSLMBs.展开更多
Cochin Port is an all-weather port situated within a protected natural harbour,just 11 km away from mainland shipping route.Total draft of 15m-16m is available and it is a natural choice for setting up transhipment hu...Cochin Port is an all-weather port situated within a protected natural harbour,just 11 km away from mainland shipping route.Total draft of 15m-16m is available and it is a natural choice for setting up transhipment hub.The International Container Transhipment Terminal(ICTT)at Vallarpadam was developed by DP World and M/s Cochin Port Trust(CPT).As a part of this project,the new Rail connectivity from ICTT at Vallarpadam to Idappalli station is 8.60km,including the construction of 4.62 km elevated bridge was awarded to AFCONS by M/s Rail Vikas Nigam Limited(RVNL),in 2007 with a scheduled completion by 2009.This bridge is constructed for single railway track and piling was done for the provision of a second railway track in future.The 4.62 km long bridge was successfully completed and Trial Loco run was done in March 2010.This paper includes details of sub-surface profile,engineering properties of soils,details of construction of pile foundations and Challenges faced during construction.展开更多
With the development of the major country diplomacy with Chinese characteristics,diplomatic discourse,as an important part of building China’s international discourse power,has attracted much attention.Personificatio...With the development of the major country diplomacy with Chinese characteristics,diplomatic discourse,as an important part of building China’s international discourse power,has attracted much attention.Personification is a common means in diplomatic discourse.By giving anthropomorphic expressions to countries,regions,institutions and policies,the purpose of building national identity and establishing national image can be achieved.Based on conceptual metaphor theory and national identity theory,this paper focuses on personification in diplomatic discourse with a case study of the regular press conference of Ministry of Foreign Affairs.It is found that the spokesperson skillfully constructed China’s positive national identity,such as peace-loving,openness and inclusiveness by using a large number of body metaphor,kinship metaphor and role metaphor.展开更多
The high-quality development of the construction industry fundamentally stems from the significant improvement of total factor productivity.Therefore,it is of crucial significance for promoting the development of the ...The high-quality development of the construction industry fundamentally stems from the significant improvement of total factor productivity.Therefore,it is of crucial significance for promoting the development of the construction industry to a higher level by scientifically and accurately measuring the total factor productivity of the construction industry and deeply analyzing the influencing factors behind it.Based on a comprehensive consideration of research methods and influencing factors,this paper systematically reviews the existing relevant literature on total factor productivity in the construction industry,aiming to reveal the current research development trend in this field and point out potential problems.This effort aims to provide a solid theoretical foundation and valuable reference for further in-depth research,and jointly promote the continuous progress and development of total factor productivity research in the construction industry.展开更多
This paper describes and provides a critique of the design and implementation of the“scoops”-a set of bespoke multifunctioning architectural free-form elements that are a highlight of the new Soheil Abedian School o...This paper describes and provides a critique of the design and implementation of the“scoops”-a set of bespoke multifunctioning architectural free-form elements that are a highlight of the new Soheil Abedian School of Architecture at Bond University,Australia,by the office of Sir Peter Cook and Gavin Robotham,CRAB(Cook Robotham Architecture Bureau,London).The development includes the transfer of analogue design processes into digital 3d modeling,which is then analyzed and rationalized via an exchange with consultants and procurement contractors.The complexity of the concrete works necessitated the use of digital fabrication to make their implementation affordable and within time constraints,with said complexity creating a variety of challenges for many aspects of the entire delivery team.The 3d model played a critical role in communicating intent and accuracy at all stages.The use of site-based craftsmanship combined with computer aided design and fabrication overlapped to realize the project.展开更多
Faced with the proliferation of quarries extracting silty sand and river sand used in the building and public works sector in Togo, recognition of the granular properties of these materials remains a major challenge f...Faced with the proliferation of quarries extracting silty sand and river sand used in the building and public works sector in Togo, recognition of the granular properties of these materials remains a major challenge for builders. This study aims to take stock of the use of sand in construction in Togo. One hundred and eighteen (118) sand quarries in operation, including thirty-eight (38) silty sand quarries and eighty (80) river sand quarries, were identified following surveys carried out among stakeholders involved in the chain of construction on 40% of the national territory. It appears from these surveys that river sands (59.43% to 84.68%) are prioritized over silty sands (15.32% to 40.57%). Three (3) main reasons are behind the choice of sand type;namely, proximity (28%), cleanliness (25%), good appearance (25%). These three (03) reasons partly explain the strong dependence of users on the sands located in their vicinity as well as the related expenses. Thus, making data available on the characteristics of sand, the materials most used in construction in Togo, would contribute to improving the housing conditions of the Togolese population. .展开更多
This paper will discuss experiments using various forming systems combined with utilizing mechanical equipment,from cement mixers to excavators and skid steers with attachments,to accelerate construction of cob homes ...This paper will discuss experiments using various forming systems combined with utilizing mechanical equipment,from cement mixers to excavators and skid steers with attachments,to accelerate construction of cob homes and greatly reduce the labor involved.Cob is a colloquial term for monolithic adobe,and refers to a masonry building technique used since ancient times that uses locally-sourced clay as a binder,with various aggregates from sand to small grit or stone,woven together with straw or other fiber and built in continuous layers to form a monolithic structure.展开更多
The target of integrated construction of comprehensive transportation hub is to integrate the traffic resources,achieve butt joint of pan-regional transportation mode,and finally realize the"seamless connection&q...The target of integrated construction of comprehensive transportation hub is to integrate the traffic resources,achieve butt joint of pan-regional transportation mode,and finally realize the"seamless connection"of the goods and"zero transfer"of the passenger traffic.Relying on the particularity of the geographical location and the convenience of the Yangtze River channel,Luzhou puts forth effort to build a comprehensive transport hub in Southern Sichuan and has made great efforts in traffic infrastructure construction.However,there are still some problems.Combining practice of Luzhou,using the advanced experience of foreign and domestic cities for reference,the paper pointed out that for the sake of constructing a comprehensive transportation hub,we need to build the traffic integration on the basis of the efficiency.Besides,the paper proposed the strategies for construction.展开更多
The construction industry, known for its low productivity, is increasingly utilising software and mobile apps to enhance efficiency. However, more comprehensive research is needed to understand the effectiveness of th...The construction industry, known for its low productivity, is increasingly utilising software and mobile apps to enhance efficiency. However, more comprehensive research is needed to understand the effectiveness of these technology applications. The PRISMA principles utilised a scoping review methodology to ascertain pertinent studies and extract significant findings. From 2013 onwards, articles containing data on mobile applications or software designed to enhance productivity in the construction sector were obtained from multiple databases, including Emerald Insight, Science Direct, IEEE Xplore, and Google Scholar. After evaluating 2604 articles, 30 were determined to be pertinent to the study and were subsequently analysed for the review. The review identified five key themes: effectiveness, benefits, successful implementation examples, obstacles and limitations, and a comprehensive list of software and mobile apps. In addition, 71 software and mobile apps have shown potentially how these technologies can improve communication, collaboration, project management, real-time collaboration, document management, and on-the-go project information and estimating processes in the construction industry, increasing efficiency and productivity. The findings highlight the potential of these technologies such as Automation, Radio-Frequency Identification (RFID), Building Information Modeling (BIM), Augmented Reality (AR), Virtual Reality (VR), and Internet of Things (IoT) to improve efficiency and communication in the construction industry. Despite challenges such as cost, lack of awareness, resistance to change, compatibility concerns, human resources, technological and security concerns and licensing issues, the study identifies specific mobile applications and software with the potential to enhance efficiency significantly, improve productivity and streamline workflows. The broader societal impacts of construction software and mobile app development include increased efficiency, job creation, and sustainability.展开更多
Space is both a product and a producer of social relations.In the spatial domain,gender blindness has long existed,limiting women’s rights of access to and use of space,leading to structural oppression of women’s ri...Space is both a product and a producer of social relations.In the spatial domain,gender blindness has long existed,limiting women’s rights of access to and use of space,leading to structural oppression of women’s rights,and giving rise to new gender inequalities.The barrier-free environment construction has the functions of eliminating physical barriers and generating societal norms,and when combined with social changes,can facilitate justice correction across multiple dimensions.However,barrier-free environment construction itself,as a means of justice correction,also suffers from gender blindness.There remains room for improvement in the areas of facility construction,information exchange,and social services within the realm of barrier-free environments.In response to this phenomenon,gender equality offers a new critical perspective.Therefore,integrating a gender perspective into the barrier-free environment construction,focusing on the spatial rights of women,especially groups with multiple vulnerabilities,such as disabled women and elderly women,can contribute to the advancement towards spatial justice.展开更多
The issues of solvability and construction of a solution of the Fredholm integral equation of the first kind are considered. It is done by immersing the original problem into solving an extremal problem in Hilbert spa...The issues of solvability and construction of a solution of the Fredholm integral equation of the first kind are considered. It is done by immersing the original problem into solving an extremal problem in Hilbert space. Necessary and sufficient conditions for the existence of a solution are obtained. A method of constructing a solution of the Fredholm integral equation of the first kind is developed. A constructive theory of solvability and construction of a solution to a boundary value problem of a linear integrodifferential equation with a distributed delay in control, generated by the Fredholm integral equation of the first kind, has been created.展开更多
文摘Automatic control technology is the basis of road robot improvement,according to the characteristics of construction equipment and functions,the research will be input type perception from positioning acquisition,real-world monitoring,the process will use RTK-GNSS positional perception technology,by projecting the left side of the earth from Gauss-Krueger projection method,and then carry out the Cartesian conversion based on the characteristics of drawing;steering control system is the core of the electric drive unmanned module,on the basis of the analysis of the composition of the steering system of unmanned engineering vehicles,the steering system key components such as direction,torque sensor,drive motor and other models are established,the joint simulation model of unmanned engineering vehicles is established,the steering controller is designed using the PID method,the simulation results show that the control method can meet the construction path demand for automatic steering.The path planning will first formulate the construction area with preset values and realize the steering angle correction during driving by PID algorithm,and never realize the construction-based path planning,and the results show that the method can control the straight path within the error of 10 cm and the curve error within 20 cm.With the collaboration of various modules,the automatic construction simulation results of this robot show that the design path and control method is effective.
基金supported by the National Natural Science Foundation of China(52130801,U20A20312,52178271,and 52077213)the National Key Research and Development Program of China(2021YFF0500903)。
文摘Identifying workers’construction activities or behaviors can enable managers to better monitor labor efficiency and construction progress.However,current activity analysis methods for construction workers rely solely on manual observations and recordings,which consumes considerable time and has high labor costs.Researchers have focused on monitoring on-site construction activities of workers.However,when multiple workers are working together,current research cannot accu rately and automatically identify the construction activity.This research proposes a deep learning framework for the automated analysis of the construction activities of multiple workers.In this framework,multiple deep neural network models are designed and used to complete worker key point extraction,worker tracking,and worker construction activity analysis.The designed framework was tested at an actual construction site,and activity recognition for multiple workers was performed,indicating the feasibility of the framework for the automated monitoring of work efficiency.
基金supported by the National Natural Science Foundation of China(41871184)the National Social Science Fund of China(21ZDA056)the Scientific and Technological Innovation Project of the Chinese Academy of Agricultural Sciences(10-IAED-ZT-01-2023and 10-IAED-RC-07-2023)。
文摘Food security is a strategic priority for a country’s economic development.In China,high-standard farmland construction(HSFC)is an important initiative to stabilize grain production and increase grain production capacity.Based on panel data from 31 sample provinces,autonomous regions,and municipalities in China from 2005–2017,this study explored the impact of HSFC on grain yield using the difference-in-differences(DID)method.The results showed that HSFC significantly increased total grain production,which is robust to various checks.HSFC increased grain yield through three potential mechanisms.First,it could increase the grain replanting index.Second,it could effectively reduce yield loss due to droughts and floods.Last,HSFC could strengthen the cultivated land by renovating the low-and medium-yielding fields.Heterogeneity analysis found that the HSFC farmland showed a significant increase in grain yield only in the main grain-producing areas and balanced areas.In addition,HSFC significantly increased the yields of rice,wheat,and maize while leading to a reduction in soybean yields.The findings suggest the government should continue to promote HSFC,improve construction standards,and strictly control the“non-agriculturalization”and“non-coordination”of farmland to increase grain production further.At the same time,market mechanisms should be used to incentivize soybean farming,improve returns and stabilize soybean yields.
基金Sponsored by Germplasm Collection and Conservation Project for the Forest and Grass Germplasm Resources in Anhui Province in 2024(hxkt2024111)Science and Technology Plan Project of Huangshan(2022KN-02)+1 种基金Humanities and Social Sciences Research Project of Anhui Higher Education Institutions(SKHS2019B07)Key School-level Project of Huangshan University(2022xkjzd004).
文摘The continuous progress of urbanization has driven the continuous development and innovation of landscape planning and design.Focused on the important design method of modern construction art,this study analyzed its concepts and characteristics,and made deep exploration to its application in landscape planning and design.The results indicated that modern construction art had a significant impact on landscape spatial planning and layout,spatial design forms,and spatial ornaments.The use of modern construction art concepts could make landscape design more scientific,artistic,and humane,creating higher quality leisure and entertainment venues for audiences.
文摘Introduction: Work-related accidents are frequent and serious in the construction sector. The aim of the study was to determine the frequency and factors associated with occupational accidents on the construction site of a referral hospital in Benin. Methods: A cross-sectional study was carried out. The sample size was calculated using the Schwartz form adjusted for the number of workers on site and was 129 workers. Random sampling was used. The dependent variable was work-related accidents. The other variables were socio-demographic and occupational characteristics. Data were collected through a questionnaire survey. Medians and proportions were calculated. An association was sought using Chi-square and Fisher tests with a threshold of p Results: A total of 132 workers were included. Their median age was 30 years with an ITQ of [27 - 38];men were the most represented 126 (95.45%) with a level of education higher than or equal to high school in 101 (76.52%) and in the majority with a permanent status 85 (64.39%). Seniority of more than 5 years was observed in 92 (69.7%). Workers working more than 8 hours of overtime per week numbered 57 (43.18%). Exposure to vibrating objects was 49 (37.12%). In terms of psychosocial constraints, 82.58% had high psychological demands;79.53% low decision-making latitude;50.76% low social support. The frequency of work-related accidents was 6.82%, and the only associated factor was the type of worker (p = 0.016). On the other hand, there were 10.2% accidents among workers handling vibrating objects versus 4.98% among those not using them. With regard to psychosocial constraints, the following frequencies were recorded respectively: 6.42% among those with high psychological demand versus 8.7% among those with low psychological demand;7.62% among those with low decision-making latitude versus 3.7% among those with high decision-making latitude;8.96% among those with low social support versus 4.62% among those with high support. Conclusion: Work-related accidents on construction sites must be avoided by all possible means including the management of psychosocial constraints.
基金supported by a grant from the National Natural Science Foundations of China(No.52171282)supported by Taishan Scholars Program of Shandong Province,China(No.tsqn202306098)the Shandong Provincial Key Research and Development Plan,China(No.2021ZLGX04).
文摘Structure-soil interface friction characteristics is of importance to investigate the interaction between engineering structures and soils,especially for offshore structures.The interface friction behavior between marine clay and structural materials with different roughness was studied in this paper by using 3D optical scanning tests,a modified direct shear device and numerical simulation.Relationships between the surface roughness of structures,water content and interface friction angle were presented by model tests.The increase of water contents decreased the interface friction angles.For interfaces with different roughness,the interface friction angles will be smaller than that of the soil when the water content exceeds a certain value.The roughness of the interface and the water content of the soil are mutually coupled to influence the coefficient of friction(COF).This paper proposed a Finite Element Method(FEM)to simulate the interface direct shear tests of structures with different roughness.The surface models with different roughness are established based on the structure data obtained by 3D scanning.The Coupled Eulerian-Lagrangian(CEL)approach was employed to analyse soils sheared by irregular surfaces.The interface behavior for interfaces with different roughness under cyclic shear stresses was analyzed by FEM.
文摘In the context of China’s economic development and population aging,the innovation and exploration of the old-age care model has emerged as a new community transformation and development direction.Given the differing needs and characteristics of individuals across the lifespan,it is evident that a design approach that incorporates mixed-age integration and mutual-help communities is a viable strategy for enhancing intergenerational exchanges.This entails the creation of a diverse and open community that is conducive to habitation for individuals of all ages,encompassing the full spectrum of needs,from those of young children to the elderly.Such a community must be designed and constructed with the population in mind,from the initial planning and design stages to the operational phase.This encompasses a comprehensive range of services,including food,clothing,housing,transportation,and medical care and recreation.
文摘Taking the changes of construction land in Wan’an County over the years as the research object,the quantity and spatial characteristics of construction land in Wan’an County were analyzed,and the overall situation and regional differences of construction land utilization in Wan’an County were revealed.From the aspects of main influencing factors such as land use structure,land use intensity,land input intensity and output benefit,an evaluation indicator system was established to evaluate the economical and intensive use level of construction land in Wan’an County.The results show that the score of the economical and intensive use level of construction land in Wan’an County was 56.92,which was the lowest among all the districts and counties in Ji’an City.Based on the evaluation results,the corresponding economizing and intensive strategies were put forward,and the safeguard measures for its implementation were explored.The purpose is to provide some support for the preparation of territorial spatial planning,the delineation of urban development boundaries,and the potential exploitation of construction land stock,hoping to improve the utilization efficiency and benefit of construction land in Wan’an County,and promote the economic growth of Wan’an County to the stage of high-quality development.
基金National Natural Science Foundation of China under Grand No.51808190the Central Government Guides Local Science and Technology Development Fund Projects under Grand No.XZ202301YD0019C+2 种基金the Foundation of Key Laboratory of Soft Soils and Geoenvironmental Engineering(Zhejiang University)Ministry of Education under Grand No.2022P04the Central University Basic Research Fund of China under Grand No.B220202017。
文摘This research is concentrated on the longitudinal vibration of a tapered pipe pile considering the vertical support of the surrounding soil and construction disturbance.First,the pile-soil system is partitioned into finite segments in the vertical direction and the Voigt model is applied to simulate the vertical support of the surrounding soil acting on the pile segment.The surrounding soil is divided into finite ring-shaped zones in the radial direction to consider the construction disturbance.Then,the shear complex stiffness at the pile-soil interface is derived by solving the dynamic equilibrium equation for the soil from the outermost to innermost zone.The displacement impedance at the top of an arbitrary pile segment is obtained by solving the dynamic equilibrium equation for the pile and is combined with the vertical support of the surrounding soil to derive the displacement impedance at the bottom of the upper adjacent segment.Further,the displacement impedance at the pile head is obtained based on the impedance function transfer technique.Finally,the reliability of the proposed solution is verified,followed by a sensitivity analysis concerning the coupling effect of the pile parameters,construction disturbance and the vertical support of the surrounding soil on the displacement impedance of the pile.
基金supported by the National Research Foundation of Korea (NRF) grant funded by the MSIT,Korea (No. 2018R1A5A1025224 and No. 2019R1A2C1084020)this research received funding support from a grant from the Korea Planning&Evaluation Institute of Industrial Technology (KEIT),funded by the MOTIE of Korea (No. 10077287)。
文摘Composite solid electrolytes(CSEs)have emerged as promising candidates for safe and high-energy–density solid-state lithium metal batteries(SSLMBs).However,concurrently achieving exceptional ionic conductivity and interface compatibility between the electrolyte and electrode presents a significant challenge in the development of high-performance CSEs for SSLMBs.To overcome these challenges,we present a method involving the in-situ polymerization of a monomer within a self-supported porous Li_(6.4)La_(3)Zr_(1.4)Ta_(0.6)O_(12)(LLZT)to produce the CSE.The synergy of the continuous conductive LLZT network,well-organized polymer,and their interface can enhance the ionic conductivity of the CSE at room temperature.Furthermore,the in-situ polymerization process can also con-struct the integration and compatibility of the solid electrolyte–solid electrode interface.The synthesized CSE exhibited a high ionic conductivity of 1.117 mS cm^(-1),a significant lithium transference number of 0.627,and exhibited electrochemical stability up to 5.06 V vs.Li/Li+at 30℃.Moreover,the Li|CSE|LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2) cell delivered a discharge capacity of 105.1 mAh g^(-1) after 400 cycles at 0.5 C and 30℃,corresponding to a capacity retention of 61%.This methodology could be extended to a variety of ceramic,polymer electrolytes,or battery systems,thereby offering a viable strategy to improve the electrochemical properties of CSEs for high-energy–density SSLMBs.
文摘Cochin Port is an all-weather port situated within a protected natural harbour,just 11 km away from mainland shipping route.Total draft of 15m-16m is available and it is a natural choice for setting up transhipment hub.The International Container Transhipment Terminal(ICTT)at Vallarpadam was developed by DP World and M/s Cochin Port Trust(CPT).As a part of this project,the new Rail connectivity from ICTT at Vallarpadam to Idappalli station is 8.60km,including the construction of 4.62 km elevated bridge was awarded to AFCONS by M/s Rail Vikas Nigam Limited(RVNL),in 2007 with a scheduled completion by 2009.This bridge is constructed for single railway track and piling was done for the provision of a second railway track in future.The 4.62 km long bridge was successfully completed and Trial Loco run was done in March 2010.This paper includes details of sub-surface profile,engineering properties of soils,details of construction of pile foundations and Challenges faced during construction.
文摘With the development of the major country diplomacy with Chinese characteristics,diplomatic discourse,as an important part of building China’s international discourse power,has attracted much attention.Personification is a common means in diplomatic discourse.By giving anthropomorphic expressions to countries,regions,institutions and policies,the purpose of building national identity and establishing national image can be achieved.Based on conceptual metaphor theory and national identity theory,this paper focuses on personification in diplomatic discourse with a case study of the regular press conference of Ministry of Foreign Affairs.It is found that the spokesperson skillfully constructed China’s positive national identity,such as peace-loving,openness and inclusiveness by using a large number of body metaphor,kinship metaphor and role metaphor.
基金Supported by School-level Natural Science Project of Jiangxi University of Technology(232ZRYB02).
文摘The high-quality development of the construction industry fundamentally stems from the significant improvement of total factor productivity.Therefore,it is of crucial significance for promoting the development of the construction industry to a higher level by scientifically and accurately measuring the total factor productivity of the construction industry and deeply analyzing the influencing factors behind it.Based on a comprehensive consideration of research methods and influencing factors,this paper systematically reviews the existing relevant literature on total factor productivity in the construction industry,aiming to reveal the current research development trend in this field and point out potential problems.This effort aims to provide a solid theoretical foundation and valuable reference for further in-depth research,and jointly promote the continuous progress and development of total factor productivity research in the construction industry.
文摘This paper describes and provides a critique of the design and implementation of the“scoops”-a set of bespoke multifunctioning architectural free-form elements that are a highlight of the new Soheil Abedian School of Architecture at Bond University,Australia,by the office of Sir Peter Cook and Gavin Robotham,CRAB(Cook Robotham Architecture Bureau,London).The development includes the transfer of analogue design processes into digital 3d modeling,which is then analyzed and rationalized via an exchange with consultants and procurement contractors.The complexity of the concrete works necessitated the use of digital fabrication to make their implementation affordable and within time constraints,with said complexity creating a variety of challenges for many aspects of the entire delivery team.The 3d model played a critical role in communicating intent and accuracy at all stages.The use of site-based craftsmanship combined with computer aided design and fabrication overlapped to realize the project.
文摘Faced with the proliferation of quarries extracting silty sand and river sand used in the building and public works sector in Togo, recognition of the granular properties of these materials remains a major challenge for builders. This study aims to take stock of the use of sand in construction in Togo. One hundred and eighteen (118) sand quarries in operation, including thirty-eight (38) silty sand quarries and eighty (80) river sand quarries, were identified following surveys carried out among stakeholders involved in the chain of construction on 40% of the national territory. It appears from these surveys that river sands (59.43% to 84.68%) are prioritized over silty sands (15.32% to 40.57%). Three (3) main reasons are behind the choice of sand type;namely, proximity (28%), cleanliness (25%), good appearance (25%). These three (03) reasons partly explain the strong dependence of users on the sands located in their vicinity as well as the related expenses. Thus, making data available on the characteristics of sand, the materials most used in construction in Togo, would contribute to improving the housing conditions of the Togolese population. .
文摘This paper will discuss experiments using various forming systems combined with utilizing mechanical equipment,from cement mixers to excavators and skid steers with attachments,to accelerate construction of cob homes and greatly reduce the labor involved.Cob is a colloquial term for monolithic adobe,and refers to a masonry building technique used since ancient times that uses locally-sourced clay as a binder,with various aggregates from sand to small grit or stone,woven together with straw or other fiber and built in continuous layers to form a monolithic structure.
文摘The target of integrated construction of comprehensive transportation hub is to integrate the traffic resources,achieve butt joint of pan-regional transportation mode,and finally realize the"seamless connection"of the goods and"zero transfer"of the passenger traffic.Relying on the particularity of the geographical location and the convenience of the Yangtze River channel,Luzhou puts forth effort to build a comprehensive transport hub in Southern Sichuan and has made great efforts in traffic infrastructure construction.However,there are still some problems.Combining practice of Luzhou,using the advanced experience of foreign and domestic cities for reference,the paper pointed out that for the sake of constructing a comprehensive transportation hub,we need to build the traffic integration on the basis of the efficiency.Besides,the paper proposed the strategies for construction.
文摘The construction industry, known for its low productivity, is increasingly utilising software and mobile apps to enhance efficiency. However, more comprehensive research is needed to understand the effectiveness of these technology applications. The PRISMA principles utilised a scoping review methodology to ascertain pertinent studies and extract significant findings. From 2013 onwards, articles containing data on mobile applications or software designed to enhance productivity in the construction sector were obtained from multiple databases, including Emerald Insight, Science Direct, IEEE Xplore, and Google Scholar. After evaluating 2604 articles, 30 were determined to be pertinent to the study and were subsequently analysed for the review. The review identified five key themes: effectiveness, benefits, successful implementation examples, obstacles and limitations, and a comprehensive list of software and mobile apps. In addition, 71 software and mobile apps have shown potentially how these technologies can improve communication, collaboration, project management, real-time collaboration, document management, and on-the-go project information and estimating processes in the construction industry, increasing efficiency and productivity. The findings highlight the potential of these technologies such as Automation, Radio-Frequency Identification (RFID), Building Information Modeling (BIM), Augmented Reality (AR), Virtual Reality (VR), and Internet of Things (IoT) to improve efficiency and communication in the construction industry. Despite challenges such as cost, lack of awareness, resistance to change, compatibility concerns, human resources, technological and security concerns and licensing issues, the study identifies specific mobile applications and software with the potential to enhance efficiency significantly, improve productivity and streamline workflows. The broader societal impacts of construction software and mobile app development include increased efficiency, job creation, and sustainability.
基金the stagedresult of “General Secretary Xi Jinping’s Expositions on Respecting and Protecting Human Rights”(Project Approval Number 22ZD004)a major project of the National Social Science Fund of China。
文摘Space is both a product and a producer of social relations.In the spatial domain,gender blindness has long existed,limiting women’s rights of access to and use of space,leading to structural oppression of women’s rights,and giving rise to new gender inequalities.The barrier-free environment construction has the functions of eliminating physical barriers and generating societal norms,and when combined with social changes,can facilitate justice correction across multiple dimensions.However,barrier-free environment construction itself,as a means of justice correction,also suffers from gender blindness.There remains room for improvement in the areas of facility construction,information exchange,and social services within the realm of barrier-free environments.In response to this phenomenon,gender equality offers a new critical perspective.Therefore,integrating a gender perspective into the barrier-free environment construction,focusing on the spatial rights of women,especially groups with multiple vulnerabilities,such as disabled women and elderly women,can contribute to the advancement towards spatial justice.
文摘The issues of solvability and construction of a solution of the Fredholm integral equation of the first kind are considered. It is done by immersing the original problem into solving an extremal problem in Hilbert space. Necessary and sufficient conditions for the existence of a solution are obtained. A method of constructing a solution of the Fredholm integral equation of the first kind is developed. A constructive theory of solvability and construction of a solution to a boundary value problem of a linear integrodifferential equation with a distributed delay in control, generated by the Fredholm integral equation of the first kind, has been created.