Blind tip reconstruction(BTR) method is one of the favorable methods to estimate the atomic force microscopy(AFM) probe shape. The exact shape of the characterizer is not required for BTR, while the geometry of the sa...Blind tip reconstruction(BTR) method is one of the favorable methods to estimate the atomic force microscopy(AFM) probe shape. The exact shape of the characterizer is not required for BTR, while the geometry of the sample may affect the reconstruction significantly. A cone-shaped array sample was chosen as a characterizer to be evaluated. The target AFM probe to be reconstructed was a diamond triangular pyramid probe with two feature angles, namely front angle(FA) and back angle(BA). Four conical structures with different semi-angles were dilated by the pyramid probe. Simulation of scanning process demonstrates that it is easy to judge from the images of the isolated rotary structure, cone-shaped, the suitability of the sample to be a tip characterizer for a pyramid probe. The cone-shaped array sample was repeatedly scanned 50 times by the diamond probe using an AFM. The series of scanning images shrank gradually and more information of the probe was exhibited in the images, indicating that the characterizer has been more suitable for BTR. The feature angle FA of the characterizer increasingly reduces during the scanning process. A self-adaptive grinding between the probe and the characterizer contributes to BTR of the diamond pyramid probe.展开更多
The preparing method,rolling technology and mechanical properties of low chromium semi-steel grinding ball by cross rolling were studied.The results show that when the low chromium semi-steel bar is forged from55mm to...The preparing method,rolling technology and mechanical properties of low chromium semi-steel grinding ball by cross rolling were studied.The results show that when the low chromium semi-steel bar is forged from55mm to50mm,cross-rolled into grinding ball at 1 000-1 050℃,air cooled and tempered at 550℃for 2h,the best mechanical properties,especially the abrasive resistance under the action of hard abrasive,can be obtained.展开更多
The fluidity and classification of bulk material (loose body) were introduced, the self-grinding mechanism and the affecting factors of bulk materials in various forms of phase, state and motion were investigated. A r...The fluidity and classification of bulk material (loose body) were introduced, the self-grinding mechanism and the affecting factors of bulk materials in various forms of phase, state and motion were investigated. A rotational-flow-state centrifugal autogenous grinder was developed on the basis of applying self-grinding mechanism of bulk material,the result tested by the autogenous grinder was compared with that tested by 4R Raymond mills, and fine particles with extremely high specific area were obtained. The feasibility of the developed new-type autogenous grinder in the view of fluid motion of bulk material was proved.展开更多
The low-energy multi-impact fracture resistance of the cross rolled low chromium cast semi-steel containing RE grinding balls was studied. Moreover, its damage mode was analyzed by means of metallographic examination,...The low-energy multi-impact fracture resistance of the cross rolled low chromium cast semi-steel containing RE grinding balls was studied. Moreover, its damage mode was analyzed by means of metallographic examination, scanning electron microscopic examination and drop ball test. The results show that it can obtain extractive impact fracture resistance after proper heat treatment. More advantages were obtained for the ball worked in the condition of low-imp ductility act. The main reasons are the function of RE and the change in morphology of eutectic carbide network.展开更多
Structural vibration control was an active research area for the past twenty years because of their potential applications in aerospace structures,civil structures,naval structures,etc.Semi-active vibration control me...Structural vibration control was an active research area for the past twenty years because of their potential applications in aerospace structures,civil structures,naval structures,etc.Semi-active vibration control methods based on piezoelectric actuators and synchronized switch damping on inductance（SSDI） techniques attract the attention of many researchers recently due to their advantages over passive and active methods.In the SSDI method,a switch shunt circuit is connected to the piezoelectric patch to shift the phase and amplify the magnitude of the voltage on the piezoelectric patch.The most important issue in SSDI method is to control the switching actions synchronously with the maximum vibration displacement or maximum strain.Hence,usually a displacement sensor is used to measure the vibration displacement or a collocated piezoelectric sensor is needed to measure the strain of the structure near the piezoelectric actuator.A self-sensing SSDI approach is proposed and applied to the vibration control of a composite beam,which avoids using a separate sensor.In the self-sensing technique,the same piezoelectric element functions as both a sensor and an actuator so that the total number of required piezoelectric elements can be reduced.One problem in the self-sensing actuator,which is the same as that in the traditional collocated piezoelectric sensors,is the noise generated in the sensor signal by the impact of voltage inversion,which may cause extra switching actions and deteriorate control performance.In order to prevent the shunt circuit from over-frequent on-and-off actions,a simple switch control algorithm is proposed.The results of control experiments show that the self-sensing SSDI approach combined with the improved switch control algorithm can effectively suppress over-frequent switching actions and gives good control performance by reducing the vibration amplitude by 45%,about 50% improvement from the traditional SSDI with a separate piezoelectric element and a classical switch.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51305298,No.51675379)Tianjin Research Program of Application Foundation and Advanced Technology(Grant No.13JCQNJC04700)
文摘Blind tip reconstruction(BTR) method is one of the favorable methods to estimate the atomic force microscopy(AFM) probe shape. The exact shape of the characterizer is not required for BTR, while the geometry of the sample may affect the reconstruction significantly. A cone-shaped array sample was chosen as a characterizer to be evaluated. The target AFM probe to be reconstructed was a diamond triangular pyramid probe with two feature angles, namely front angle(FA) and back angle(BA). Four conical structures with different semi-angles were dilated by the pyramid probe. Simulation of scanning process demonstrates that it is easy to judge from the images of the isolated rotary structure, cone-shaped, the suitability of the sample to be a tip characterizer for a pyramid probe. The cone-shaped array sample was repeatedly scanned 50 times by the diamond probe using an AFM. The series of scanning images shrank gradually and more information of the probe was exhibited in the images, indicating that the characterizer has been more suitable for BTR. The feature angle FA of the characterizer increasingly reduces during the scanning process. A self-adaptive grinding between the probe and the characterizer contributes to BTR of the diamond pyramid probe.
基金Item Sponsored by Guiding Program of Science and Technology Research of Hebei of China(94122123)
文摘The preparing method,rolling technology and mechanical properties of low chromium semi-steel grinding ball by cross rolling were studied.The results show that when the low chromium semi-steel bar is forged from55mm to50mm,cross-rolled into grinding ball at 1 000-1 050℃,air cooled and tempered at 550℃for 2h,the best mechanical properties,especially the abrasive resistance under the action of hard abrasive,can be obtained.
文摘The fluidity and classification of bulk material (loose body) were introduced, the self-grinding mechanism and the affecting factors of bulk materials in various forms of phase, state and motion were investigated. A rotational-flow-state centrifugal autogenous grinder was developed on the basis of applying self-grinding mechanism of bulk material,the result tested by the autogenous grinder was compared with that tested by 4R Raymond mills, and fine particles with extremely high specific area were obtained. The feasibility of the developed new-type autogenous grinder in the view of fluid motion of bulk material was proved.
文摘The low-energy multi-impact fracture resistance of the cross rolled low chromium cast semi-steel containing RE grinding balls was studied. Moreover, its damage mode was analyzed by means of metallographic examination, scanning electron microscopic examination and drop ball test. The results show that it can obtain extractive impact fracture resistance after proper heat treatment. More advantages were obtained for the ball worked in the condition of low-imp ductility act. The main reasons are the function of RE and the change in morphology of eutectic carbide network.
基金supported by National Natural Science Foundation of China (Grant No. 50775110, Grant No. 50830201)Program for Changjiang Scholars and Innovative Research Team of China (Grant No. Irt0906)+1 种基金Aeronautical Science Fund of China (Grant No. 20091552017)Jiangsu Provincal Graduate Innovation Program of China (Grant No. CX08B_048Z)
文摘Structural vibration control was an active research area for the past twenty years because of their potential applications in aerospace structures,civil structures,naval structures,etc.Semi-active vibration control methods based on piezoelectric actuators and synchronized switch damping on inductance（SSDI） techniques attract the attention of many researchers recently due to their advantages over passive and active methods.In the SSDI method,a switch shunt circuit is connected to the piezoelectric patch to shift the phase and amplify the magnitude of the voltage on the piezoelectric patch.The most important issue in SSDI method is to control the switching actions synchronously with the maximum vibration displacement or maximum strain.Hence,usually a displacement sensor is used to measure the vibration displacement or a collocated piezoelectric sensor is needed to measure the strain of the structure near the piezoelectric actuator.A self-sensing SSDI approach is proposed and applied to the vibration control of a composite beam,which avoids using a separate sensor.In the self-sensing technique,the same piezoelectric element functions as both a sensor and an actuator so that the total number of required piezoelectric elements can be reduced.One problem in the self-sensing actuator,which is the same as that in the traditional collocated piezoelectric sensors,is the noise generated in the sensor signal by the impact of voltage inversion,which may cause extra switching actions and deteriorate control performance.In order to prevent the shunt circuit from over-frequent on-and-off actions,a simple switch control algorithm is proposed.The results of control experiments show that the self-sensing SSDI approach combined with the improved switch control algorithm can effectively suppress over-frequent switching actions and gives good control performance by reducing the vibration amplitude by 45%,about 50% improvement from the traditional SSDI with a separate piezoelectric element and a classical switch.
