Liquid–liquid extraction of levulinic acid from aqueous solutions using hydrophobic tri-n-octylamine/alcohol-based deep eutectic solvent

Levulinic acid(LA)is one of the top-12 most promising biomass-based platform chemicals,which has a wide range of applications in a variety of fields.However,separation and purification of LA from aqueous solution or actual hydrolysate continues to be a challenge.Among various downstream separation technologies,liquid-liquid extraction is a low-cost,effective,and simple process to separate LA.The key breakthrough lies in the development of extractants with high extraction efficiency,good hydrophobicity,and low cost.In this work,three hydrophobic deep eutectic solvents(DESs)based on tri-n-octylamine(TOA)as hydrogen bond acceptor(HBA)and alcohols(butanol,2-octanol,and menthol)as hydrogen bond donors(HBDs)were developed to extract LA from aqueous solution.The molar ratios of HBD and HBA,extraction temperature,contact time,solution pH,and initial LA concentration,DES/water volume ratios were systematically investigated.Compared with 2-octanol-TOA and menthol-TOA DES,the butanol-TOA DES exhibited the superior extraction performance for LA,with a maximum extraction efficiency of 95.79±1.4%.Moreover,the solution pH had a great impact on the LA extraction efficiency of butanol-TOA(molar ratio=3:1).It is worth noting that the extraction equilibrium time was less than 0.5 h.More importantly,the butanol-TOA(3:1)DES possesses good extraction abilities for low,medium,and high concentrations of LA.

Corrosion behavior of Hastelloy C22 coating produced by laser cladding in static and cavitation acid solution

The Hastelloy C22 coatings on Q235 steel substrate were produced by high power diode laser cladding technique. Their corrosion behaviors in static and cavitation hydrochloric, sulfuric and nitric acid solutions were investigated. The electrochemical results show that corrosion resistance of coatings in static acid solutions is higher than that in cavitation ones. In each case, coating corrosion resistance in descending order is in nitric, sulfuric and hydrochloric acid solutions. Obvious erosion-corrosion morphology and serious intercrystalline corrosion of coating are noticed in cavitation hydrochloric acid solution. This is mainly ascribed to the aggressive ions in hydrochloric acid solution and mechanical effect from cavitation bubbles collapse. While coating after corrosion test in cavitation nitric acid solution shows nearly unchanged surface morphology. The results indicate that the associated action of cavitation and property of acid solution determines the corrosion development of coating. Hastelloy C22 coating exhibits better corrosion resistance in oxidizing acid solution for the stable formation of dense oxide film on the surface.

Preparation of Cu nanoparticles with ascorbic acid by aqueous solution reduction method

Cu nanoparticles were prepared by reducing Cu2＋ ions with ascorbic acid through aqueous solution reduction method. The effects of solution pH and average size of Cu2O particles on the preparation of Cu nanoparticles were investigated. Cu particles were prepared at pH 3, 5 or 7, with the smallest Cu particles obtained at pH 7. However, Cu particles could not be prepared at pH 9 or 11. The average size of Cu2O particles can affect that of Cu particles. Larger Cu2O particles result in larger Cu particles. In addition, experiments were conducted to explore the reaction process by measuring the X-ray diffraction （XRD） patterns of specimens collected at different time points during the reaction. It was found that Cu（OH）2 was initially formed as a precursor, followed by the formation of Cu2O, which was finally reduced to Cu particles.

Corrosion properties of stainless steel 316L/Ni-Cu-P coatings in warm acidic solution

In order to improve corrosion resistance of stainless steel 316L in warm acidic solution, Ni？Cu？P coatings with high copper and phosphorus contents were deposited onto stainless steel 316L substrates via electroless plating. The structure of the film and its resistance to corrosion in a warm acidic environment were investigated using scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDS）, X-ray diffraction spectrometry （XRD）, polarization curves, electrochemical impedance spectroscopy （EIS）, and dipping corrosion tests, respectively. The results demonstrate that Ni？Cu？P coatings consist of two types of nodules, which are 19.98% Cu and 39.17% Cu （mass fraction） respectively. The corrosion resistance of the 316L substrate when subjected to a warm acidic solution is significantly improved by the addition of the new type of the Ni？Cu？P coating. The as-plated coatings demonstrate better corrosion resistance than annealed coatings. As-plated coatings and those annealed at 673 K are found to corrode selectively, while pitting is observed to be the main corrosion mechanism of coatings annealed at 773 and 873 K.

Photodegradation of α-naphthaleneacetic acid in aqueous solution

Kinetic processes of a-naphthaleneacetic acid (NAA) photolysis were studied under different conditions. The results showed that the ultraviolet light was more effective than fluorescent light in promoting degradation, and the degradation of NAA under ultraviolet light followed the first order kinetics with the photolysis rate constant of 1.15 x 10-2 min-1 and half-life time (t1/2) of 60 min. Further, it was proved that the photolysis rate was higher in the presence of oxygen, titanium dioxide (TiO2), and low pH (acidic solution). At last, two photolysis intermediates were identified by GC-MS and possible photolysis pathways were proposed.

Solvent extraction of vanadium from sulfuric acid solution

The behaviour of vanadium（V） extracted from sulfuric acid solution was investigated using Cyanex 923 as an extractant. The effects of the concentration of Cyanex 923 and the pH of the solution were studied. The extraction of vanadium（V） increases with the increase of Cyanex 923 concentration and shaking time. Cyanex 923 can extract vanadium（V） from sulfuric acid solution at low pH conditions, and the best pH conditions for extraction of vanadium（V） are at pH 1.0-2.0. The species extracted into the organic phase is VO2HSO4 with one molecule of Cyanex 923. Equilibrium studies were used to assess the extraction efficiency of vanadium（V） recovery from the sulfuric acid solution.

Electrochemical Corrosion Behavior of Nd-Fe-B Sintered Magnets in Different Acid Solutions

Electrochemical corrosion behavior of Nd-Fe-B sintered magnets in nitric acid, hydrochloric acid, sulfuric acid, phosphate acid and in oxalic acid was studied. Potentiodynamic polarization curves and immersion time dependence of corrosion rates of Nd-Fe-B sintered magnets in different acid solutions were tested. Microstructures of corroded Nd-Fe-B sintered magnets were investigated by means of SEM and AFM. The results indicate that in strong acid solutions of similar hydrogen ion concentration, the corrosion current increases in the order of HCl 〉 H3SO4 〉 HNO3 solution and Nd-Fe-B sintered magnets are passivated in phosphate acid and oxalic acid. Within 25 min, the corrosion rates of Nd-Fe-B sintered magnets in H2SO4 and H3PO4 solutions show a declining trend with immersion time, while in HNO3 and HCl solutions the corrosion rates are rising. And in H2C2O4 solution, weight of the magnets increases. The brim of Nd-Fe-B sintered magnets is corroded rather seriously and the size of the magnets changed greatly in nitric acid. The surfaces of the corroded magnets in the above mentioned acid solutions are all coarse.

Alpha radiolysis of nitric acid aqueous solution irradiated by 238Pu source

Alpha radiolysis of nitric acid aqueous solution by a ^(238)Pu source is investigated experimentally and theoretically.The time dependence of the nitrous acid yield on dose rate,nitric acid concentration,and nitrate ion concentration is studied.A novel kinetic model for the α-radiolysis of nitric acid aqueous solution is established,by considering the direct and indirect effects.The simulation results agree well with the experimental data,indicating the validity of our model to treat the reaction paths for generation and consumption of nitrous acid.It is shown that the redox reactions involving Pu cannot be neglected in theα-radiolysis of the solution.The results provide a better understanding of the α-ray radiolysis of aqueous nitric acid.

Formation and Oxidation of Hydrogen Molybdenum Bronze on Platinum Electrode in Sulfuric Acid Solution

Hydrogen molybdenum bronze (HxMoO3) can be electrodeposited on platinum and oxidized in two steps to the hydrogen molybdenum bronze with less amount of hydrogen HyMoO3 (y<x) and MoO3 when platinum electrode is cycled from -0.2 to 1.3V (vs. SCE) in 0.05 mol/L Na2MoO4 + 0.5 mol/L H2SO4 solution. During the formation of HxMoO3, the electrochemical reduction of molybdate existing in the form of polymolydate is reversible and is about a five-electron transfer reaction.

One-pot degradation of cellulose into carbon dots and organic acids in its homogeneous aqueous solution

As the abundant biopolymer, cellulose can be used as a feedstock for chemicals and materials. Effective conversion of cellulose by simple processes is a key point. Degradation of cellulose in its homogeneous solution is attractive for the molecular chains are free and spread. Here,microcrystalline cellulose was first dissolved in aqueous solution of Na OH and urea, and then hydrothermal reaction was carried out at various temperature and time. Fluorescence carbon dots(CDs) were generated accompanied with six organic acids: oxalic acid, formic acid, malonic acid, lactic acid, acetic acid, and fumaric acid. The yields of all organic acids and CDs, and the fluorescence quantum yield(QY) of CDs were studied at different reaction conditions. It was found that the maximum yield of organic acids and CDs are 80.1% and 6.03%, respectively, and the highest QY of the CDs is 10.9%. Fluorescence studies reveal that the as-prepared CDs has efficient selectivity and sensitivity toward iron ions in acidic condition, indicating it is a potential fluorescent sensor to the detection of Fe3+. Importantly, it provides a panorama to summary the degradation routes of cellulose in its homogeneous aqueous solution with both organic molecules and CDs as products.

Direct extraction of Mo(VI) from acidic leach solution of molybdenite ore by ion exchange resin:Batch and column adsorption studies

The adsorption behavior of ion exchange resin D301 in the extraction of hexavalent molybdenum from high acidic leach solution was investigated. SEM, EDS and Raman spectra analyses were applied to studying the adsorption capacity, reaction kinetics and possible adsorption mechanism in detail. Results showed that the adsorption capacity of D301 resin for molybdenum from high acidic leach solution was up to 463.63 mg/g. Results of the kinetic analysis indicated that the adsorption process was controlled by the particle diffusion with the activation energy 25.47 k J/mol（0.9-1.2 mm） and 20.38 k J/mol（0.6-0.9 mm）. Furthermore, the molybdenum loaded on the resin could be eluted by using 2 mol/L ammonia hydroxide solution. Besides, dynamic continuous column experiments verified direct extraction of molybdenum from acidic leach solutions by ion exchange resin D301 and the upstream flow improved dynamic continuous absorption.

Effects of applied potential on the stress corrosion cracking behavior of 7003 aluminum alloy in acid and alkaline chloride solutions

Potentiodynamic polarization tests and slow strain rate test（SSRT） in combination with fracture morphology observations were conducted to investigate the stress corrosion cracking（SCC） behavior of 7003 aluminum alloy（AA7003） in acid and alkaline chloride solutions under various applied potentials（Ea）. The results show that AA7003 is to a certain extent susceptible to SCC via anodic dissolution（AD） at open-circuit potential（OCP） and is highly susceptible to hydrogen embrittlement（HE） at high negative Ea in the solutions with p H levels of 4 and 11. The susceptibility increases with negative shift in the potential when Ea is less than-1000 m V vs. SCE. However, the susceptibility distinctly decreases because of the inhibition of AD when Ea is equal to-1000 m V vs. SCE. In addition, the SCC susceptibility of AA7003 in the acid chloride solution is higher than that in the alkaline solution at each potential. Moreover, the effect of hydrogen on SCC increases with increasing hydrogen ion concentration.

Microwave-induced synthesis and characterization of nanometer Ce_(0.5)Zr_(0.5)O_2 solid solution for the acidic catalytic reaction

Ce0.5Zr0.5O2 solid solution was successfully synthesized using cerium nitrate, zirconium nitrate, and urea as raw materials by the microwave irradiation method and characterized by X-ray diffraction, fluorescence spectrum, transmission electron microscopy, and infrared spectrum. Its acid catalytic activity was evaluated in the esterification reaction of acetic acid and n-butyl alcohol. The results show that Ce0.5Zr0.5O2 solid solution has cubic fluorite structure, and its particle diameter is in the nanometer scale. As a sort of solid acid, it possesses a higher acid catalytic activity and can be easily separated from reaction liquids. It can be used for several times, and basically, its activity keeps constant. The proton acid sites and Lewis acid sites exist in the structure of Ce0.5Zr0.5O2 solid solution.

Study on Effects of Organic Nutrient Solution on Amino Acid Contents in Litchi (Litchi chinensis Sonn.) Fruit

[Objectives] This study was conducted to investigate the effect of organic nutrient solution on litchi quality. [Methods] Different concentrations of organic nutrient solutions were sprayed on litchi leaves to study their effects on amino acid contents in the fruit of litchi cultivar "Qinzhouhongli". [Results] The results showed that the organic nutrient solution could significantly promote the growth of litchi fruit at various development stages and improve fruit quality by spraying the organic nutrient solution for 3 times with a dilution concentration of 500-1 500 times during fruit development(at an interval of 15 d) of litchi. It could increase the total essential amino acid, total semi-essential amino acid, lysine, phenylalanine, threonine, methionine, valine, leucine, histidine, arginine, aspartic acid, glycine, serine, proline, alanine and tyrosine contents. Spraying the organic nutrient solution with a dilution concentration of 1 000 times achieved the best effect of promoting the growth and improving quality of litchi fruit. [Conclusions] This study provides a theoretical basis for high-quality production and nutritional quality evaluation of litchi and the development of functional processed litchi products.

Corrosion Inhibition of Carbon Steel in Hot Hydrochloric Acid Solutions

The dissolution of carbon steel in 5% HCl in the temperature range of 30~90℃ was inhibited by two organic compounds having the general formula: ClR NH2(CH2)n NH2 RCl where R is a benzyl group. The behaviour of these inhibitors in acidic medium were investigated using weight loss method, open circuit potential and linear polarization technique. These inhibitors provided satisfactory corrosion inhibition for carbon steel in hydrochloric acid solutions even at higher temperature and acid concentration (10%). The electrochemical results showed that the polarization resistance (Rp) values increased with increasing inhibitor concentration, also the corrosion current decreased and a higher inhibition efficiency was obtained. The protective properties of these two organic inhibitors were attributed to the chemisorption mechanism

A robust predictive tool for estimating CO2 solubility in potassium based amino acid salt solutions

The acid gas absorption in four potassium based amino acid salt solutions was predicted using artificial neural network(ANN). Two hundred fifty-five experimental data points for CO_2 absorption in the four potassium based amino acid salt solutions containing potassium lysinate, potassium prolinate, potassium glycinate, and potassium taurate were used in this modeling. Amine salt solution's type, temperature, equilibrium partial pressure of acid gas, the molar concentration of the solution, molecular weight, and the boiling point were considered as inputs to ANN to prognosticate the capacity of amino acid salt solution to absorb acid gas. Regression analysis was employed to assess the performance of the network. Levenberg–Marquardt back-propagation algorithm was used to train the optimal ANN with 5:12:1 architecture. The model findings indicated that the proposed ANN has the capability to predict precisely the absorption of acid gases in various amino acid salt solutions with Mean Square Error(MSE) value of 0.0011, the Average Absolute Relative Deviation(AARD) percent of 5.54%,and the correlation coefficient(R^2) of 0.9828.

Development of Better-Quality Assay Method for the Citric Acid and Sodium Citrate in Ophthalmic/Oral Solutions and Their Application to Deformulation Studies

There were several techniques determined for the analysis of citrate and citric acid mixtures in the pharmaceutical dosage forms. Titration methods, photometric and ion chromatographic methods were used for their determination. These methods will restrict too many factors where the accurate quantification of citrate and citric acid is extremely challenging. Citric acid is the natural flavor used as a preservative for many pharmaceutical applications. Deformulation techniques used for the manufacturing of generic drugs require authentic data for their regulatory submissions. Simple accurate and reproducible validated method developed for the determination of citric acid and sodium citrate by titration followed by HPLC analysis. Free citric acid was determined by the titration method and total citric acid was determined by HPLC analysis. After subtracting the free citric acid from total citric acid content, citric acid present in the sodium citrate content was determined. Sodium citrate content was determined by applying sodium correction factor to the subtracted value of the citric acid. The results met all the validation parameters and the method was successfully measured the amount of citric acid and sodium citrate in the marketed ophthalmic/oral solutions.

Utilizing Instilling Negative Pressure Wound Therapy with Vashe Wound Solution for an Infected Sternal Dehiscence: A Case Report

Utilization of negative pressure wound therapy with instillation (NPWTi) for sternal dehiscence wounds secondary to sternal wound infection after surgery has become an accepted therapy. NPWTi accelerates wound healing through macrostrain, microstrain, and cyclic fluid instillation. Wounds benefit from additional superficial infection control with the removal of microorganisms, the release of proinflammatory mediators, stimulation of angiogenesis, as well as mechanical debridement. However, very few cases of utilizing NPWTi in the treatment of sternal wound infections have been reported in the literature. This case study describes the use of NPWTi with hypochlorous acid for the treatment of a sternal wound infection.

Dissolution kinetics of Si and Al from montmorillonite in carbonic acid solution

The reaction between carbonic acid and montmorillonite minerals was studied in order to provide a theoretical basis for analyzing changes in the physical properties of coal seams after CO_(2)injection and for optimizing CO_(2) pumping parameters.A single montmorillonite mineral of purity[90%was selected and subjected to reactions at 25,35,and 45℃in carbonic acid solutions of varying acidity.The Si and Al concentrations in the solutions and the structure and elemental compositions of the montmorillonite before and after the reactions were analyzed using a spectrophotometer,an X-ray diffractometer,and an energy-dispersive X-ray spectrometer;kinetic reaction models were established for the dissolution of Si and Al in carbonic acid solutions in order to estimate the apparent activation energy of Si dissolution under different acidity conditions.The results indicate that Al dissolved rapidly and soon reached solubility equilibrium.On the other hand,Si concentration in the solutions increased rapidly and then gradually declined with vibrations,with maximum values at 25,35,and 45℃,which were observed at approximately 96,72,and 48 h,respectively.In addition,Si dissolution fitted the diffusion-controlled reaction model well;as the pH value decreased,the apparent activation energy of Si dissolution decreased,and Si became easier to dissolve.Furthermore,it was concluded that as a weak acid,carbonic acid causes little damage to the mineral structure of montmorillonite.

Corrosion-wear behavior of nanocrystalline Fe88Si12 alloy in acid and alkaline solutions

The corrosion-wear behavior of a nanocrystalline Fe_（88）Si_（12） alloy disc coupled with a Si_3N_4 ball was investigated in acid（pH 3） and alkaline（pH 9） aqueous solutions. The dry wear was also measured for reference. The average friction coefficient of Fe_（88）Si_（12） alloy in the pH 9 solution was approximately 0.2, which was lower than those observed for Fe_（88）Si_（12） alloy in the pH 3 solution and in the case of dry wear. The fluctuation of the friction coefficient of samples subjected to the pH 9 solution also showed similar characteristics. The wear rate in the pH 9 solution slightly increased with increasing applied load. The wear rate was approximately one order of magnitude less than that in the pH 3 solution and was far lower than that in the case of dry wear, especially at high applied load. The wear traces of Fe_（88）Si_（12） alloy under different wear conditions were examined and analyzed by scanning electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The results indicated that the tribo-chemical reactions that involve oxidation of the worn surface and hydrolysis of the Si_3N_4 ball in the acid solution were restricted in the pH 9 aqueous solution. Thus, water lubrication can effectively improve the wear resistance of nanocrystalline Fe_（88）Si_（12） alloy in the pH 9 aqueous solution.