The mechanical behavior and failure mechanism of recycled semi-flexible pavement material were investigated by different scales method. The macroscopic mechanical behavior of samples was studied by static and dynamic ...The mechanical behavior and failure mechanism of recycled semi-flexible pavement material were investigated by different scales method. The macroscopic mechanical behavior of samples was studied by static and dynamic splitting tensile tests on mechanics testing system(MTS). The mechanical analysis in micro scale was carried out by material image analysis method and finite element analysis system. The strains of recycled semi-flexible pavement material on samples surface and in each phase materials were obtained. The test results reveal that the performance of recovered asphalt binder was the major determinant on the structural stability of recycled semi-flexible pavement material. The asphalt binder with high viscoelasticity could delay the initial cracking time and reduce the residual strain under cyclic loading conditions. The failure possibility order of each phase in recycled semi-flexible pavement material was asphalt binder, reclaimed aggregate, cement paste and virgin aggregate.展开更多
The cracking performance of semi-flexible pavement(SFP) was investigated by using the semi-circular bending(SCB) test in this paper. Thirteen grouting slurries were prepared. The compressive strength of these material...The cracking performance of semi-flexible pavement(SFP) was investigated by using the semi-circular bending(SCB) test in this paper. Thirteen grouting slurries were prepared. The compressive strength of these materials ranges from 3 to 100 MPa. The relationship between the compressive strength of the grouting slurry and the cracking property of SFP was obtained at different loading rates and different temperatures. The peak load, fracture energy(E), flexible index(FI), and cracking resistance index(CRI) were calculated to determine the material performance. The results show that the compressive strength of the grout influences the cracking behavior. With a higher comprehensive strength grouting slurry, the FI value of SFP decreased initially and then increased slightly at 25 ℃ in 50 mm/min. The CRI value decreased at the same time. E values changed just according to the test temperature and loading rate. The damage paths of SFP are different. The damage path of the SFP sample appears as diffuse damage at 1 mm/min at 60 ℃ or clean damage at 50 mm/min at 25 ℃. These findings indicate that there is a correlation between the compressive strength of grouting slurry and SFP cracking behavior. The cracking form is influenced by loading rate and temperature.展开更多
The primary goal of this study is the design and construction of semi-flexible pavement(SFP)mixture in accordance with the engineering and mechanical criteria.This study involves the use of a range of gradation curves...The primary goal of this study is the design and construction of semi-flexible pavement(SFP)mixture in accordance with the engineering and mechanical criteria.This study involves the use of a range of gradation curves,air void contents,cellulose and synthesized fibers,and neat and modified asphalt binders to prepare the open-graded asphalt(OGA)mixtures.To analyze the characteristics of these mixtures,a variety of test,namely binder drainage,semi-circular bending(SCB),Cantabro,wheel tracking,indirect tensile strength(ITS),and permeability tests were conducted.Additionally,to analyze the prepared grouting material,flexural strength,compressive strength,and fluidity tests were conducted.In the final stage,SFP was compared to HMA in terms of engineering characteristics and performance.According to the results,SFP was more resistant to skid,rutting,fire,and moisture damage,while HMA had a better performance in fracture tests,including SCB test.According to the results of the mechanical performance tests conducted on OGA mixtures,the highest and lowest values for air void content to achieve the highest mechanical performance level were 30%-35%and 25%,respectively.Also,based on the laboratory results,it was determined that the required void ratio for constructing OGA mixtures was 24%-26%based on the bitumen type and fibers amount in the mixture.Finally,SFP mixture can be regarded as a viable alternative to common pavements thanks to its high resistance to rutting and moisture damage,long freezing-thawing fatigue life,and adequate fire and skid resistance.展开更多
Titanium dioxide(TiO_(2))was recently employed to apply onto road surfaces to degrade the harmful compounds from vehicle emissions.However,it remains a challenging task to find a highly compatible pavement type for Ti...Titanium dioxide(TiO_(2))was recently employed to apply onto road surfaces to degrade the harmful compounds from vehicle emissions.However,it remains a challenging task to find a highly compatible pavement type for TiO_(2)application to achieve durable and efficient air-purifying performance.This study proposed to coat TiO_(2)particles onto semi-flexible pavement surface and tried to investigate an optimum coating method.Three coating methods,including direct mixing TiO_(2)(MT)with asphalt mixture,spraying dry TiO_(2)(ST)coating and watersolution-based TiO_(2)(WT)coating on semi-flexible pavement surface.To achieve this objective,semi-flexible samples were prepared to evaluate and compare the performances of three coating methods by employing resistance to wearing,NO removal efficiency tests and residual texture depth tests.It was found that the ST method not only provided better NO degrading efficiency but also improved the resistance to wearing than the other two methods.展开更多
文摘The mechanical behavior and failure mechanism of recycled semi-flexible pavement material were investigated by different scales method. The macroscopic mechanical behavior of samples was studied by static and dynamic splitting tensile tests on mechanics testing system(MTS). The mechanical analysis in micro scale was carried out by material image analysis method and finite element analysis system. The strains of recycled semi-flexible pavement material on samples surface and in each phase materials were obtained. The test results reveal that the performance of recovered asphalt binder was the major determinant on the structural stability of recycled semi-flexible pavement material. The asphalt binder with high viscoelasticity could delay the initial cracking time and reduce the residual strain under cyclic loading conditions. The failure possibility order of each phase in recycled semi-flexible pavement material was asphalt binder, reclaimed aggregate, cement paste and virgin aggregate.
基金Funded by National Natural Science Foundation of China (No. 52078241)the Natural Science Foundation of Jiangsu Province (No. BK20210058)。
文摘The cracking performance of semi-flexible pavement(SFP) was investigated by using the semi-circular bending(SCB) test in this paper. Thirteen grouting slurries were prepared. The compressive strength of these materials ranges from 3 to 100 MPa. The relationship between the compressive strength of the grouting slurry and the cracking property of SFP was obtained at different loading rates and different temperatures. The peak load, fracture energy(E), flexible index(FI), and cracking resistance index(CRI) were calculated to determine the material performance. The results show that the compressive strength of the grout influences the cracking behavior. With a higher comprehensive strength grouting slurry, the FI value of SFP decreased initially and then increased slightly at 25 ℃ in 50 mm/min. The CRI value decreased at the same time. E values changed just according to the test temperature and loading rate. The damage paths of SFP are different. The damage path of the SFP sample appears as diffuse damage at 1 mm/min at 60 ℃ or clean damage at 50 mm/min at 25 ℃. These findings indicate that there is a correlation between the compressive strength of grouting slurry and SFP cracking behavior. The cracking form is influenced by loading rate and temperature.
文摘The primary goal of this study is the design and construction of semi-flexible pavement(SFP)mixture in accordance with the engineering and mechanical criteria.This study involves the use of a range of gradation curves,air void contents,cellulose and synthesized fibers,and neat and modified asphalt binders to prepare the open-graded asphalt(OGA)mixtures.To analyze the characteristics of these mixtures,a variety of test,namely binder drainage,semi-circular bending(SCB),Cantabro,wheel tracking,indirect tensile strength(ITS),and permeability tests were conducted.Additionally,to analyze the prepared grouting material,flexural strength,compressive strength,and fluidity tests were conducted.In the final stage,SFP was compared to HMA in terms of engineering characteristics and performance.According to the results,SFP was more resistant to skid,rutting,fire,and moisture damage,while HMA had a better performance in fracture tests,including SCB test.According to the results of the mechanical performance tests conducted on OGA mixtures,the highest and lowest values for air void content to achieve the highest mechanical performance level were 30%-35%and 25%,respectively.Also,based on the laboratory results,it was determined that the required void ratio for constructing OGA mixtures was 24%-26%based on the bitumen type and fibers amount in the mixture.Finally,SFP mixture can be regarded as a viable alternative to common pavements thanks to its high resistance to rutting and moisture damage,long freezing-thawing fatigue life,and adequate fire and skid resistance.
基金The authors would like to acknowledge the Science Technology Department of Zhejiang Province(Grant Nos.2018F10045 and 2021C01106)for the funding support and the technical guidance in 3D laser scanning by Dr.Fengxia Chi from the Institute of Road Engineering of Zhejiang Scientific Research Institute of TransportThe constant of this paper reflects the views of authors,who are responsible for the facts and the accuracy of the data shown herein.The authors gratefully acknowledge their financial and technical supporting.
文摘Titanium dioxide(TiO_(2))was recently employed to apply onto road surfaces to degrade the harmful compounds from vehicle emissions.However,it remains a challenging task to find a highly compatible pavement type for TiO_(2)application to achieve durable and efficient air-purifying performance.This study proposed to coat TiO_(2)particles onto semi-flexible pavement surface and tried to investigate an optimum coating method.Three coating methods,including direct mixing TiO_(2)(MT)with asphalt mixture,spraying dry TiO_(2)(ST)coating and watersolution-based TiO_(2)(WT)coating on semi-flexible pavement surface.To achieve this objective,semi-flexible samples were prepared to evaluate and compare the performances of three coating methods by employing resistance to wearing,NO removal efficiency tests and residual texture depth tests.It was found that the ST method not only provided better NO degrading efficiency but also improved the resistance to wearing than the other two methods.
