The requirements of vehicle dynamic stability control are higher than ever as the significant increase of electric drive articulated vehicle speed. According to the construction features of articulated dumping truck a...The requirements of vehicle dynamic stability control are higher than ever as the significant increase of electric drive articulated vehicle speed. According to the construction features of articulated dumping truck and nonlinear characteristics of moving vehicles,nonlinear observer of vehicle status is designed to strength robustness of dynamic control system in this paper. A 4-degree-of-freedom nonlinear dynamic model of articulated electric drive vehicle is built as reference model to estimate the state of the articulated vehicle. And by adopting Unscented Kalman Filter( UKF) algorithm,a series of state parameters such as longitudinal velocities of front and rear frames,yaw rate and side-slip angle are estimated. During the test of 60 t articulated electric drive vehicle,2 inertial navigation modules are installed in the front frame and rear frame respectively and the speed of each electric drive wheel is obtained simultaneously. As the test results suggest,in various working conditions,the algorithm based on UKF is able to accurately estimate the state parameters of articulated vehicle with the estimated error less than 5%. The proposed method is justified to be the theoretical basis and application guidance for articulated vehicle stability control.展开更多
This paper designs a novel controller to improve the path-tracking performance of articulated dump truck(ADT). By combining linear quadratic regulator(LQR) with genetic algorithm(GA), the designed controller is used t...This paper designs a novel controller to improve the path-tracking performance of articulated dump truck(ADT). By combining linear quadratic regulator(LQR) with genetic algorithm(GA), the designed controller is used to control linear and angular velocities on the midpoint of the front frame. The novel controller based on the error dynamics model is eventually realized to track the path high-precisely with constant speed. The results of simulation and experiment show that the LQR-GA controller has a better tracking performance than the existing methods under a low speed of 3 m/s. In this paper, kinematics model and simulation control models based on co-simulation of ADAMS and Matlab/Simulink are established to verify the proposed strategy. In addition, a real vehicle experiment is designed to further more correctness of the conclusion. With the proposed controller and considering the steering model in the simulation, the control performance is improved and matches the actual situation better. The research results contribute to the development of automation of ADT.展开更多
Purpose–This study aims to develop an automatic lane-change mechanism on highways for self-driving articulated trucks to improve traffic safety.Design/methodology/approach–The authors proposed a novel safety lane-cha...Purpose–This study aims to develop an automatic lane-change mechanism on highways for self-driving articulated trucks to improve traffic safety.Design/methodology/approach–The authors proposed a novel safety lane-change path planning and tracking control method for articulated vehicles.A double-Gaussian distribution was introduced to deduce the lane-change trajectories of tractor and trailer coupling characteristics of intelligent vehicles and roads.With different steering and braking maneuvers,minimum safe distances were modeled and calculated.Considering safety and ergonomics,the authors invested multilevel self-driving modes that serve as the basis of decision-making for vehicle lane-change.Furthermore,a combined controller was designed by feedback linearization and single-point preview optimization to ensure the path tracking and robust stability.Specialized hardware in the loop simulation platform was built to verify the effectiveness of the designed method.Findings–The numerical simulation results demonstrated the path-planning model feasibility and controller-combined decision mechanism effectiveness to self-driving trucks.The proposed trajectory model could provide safety lane-change path planning,and the designed controller could ensure good tracking and robust stability for the closed-loop nonlinear system.Originality/value–This is a fundamental research of intelligent local path planning and automatic control for articulated vehicles.There are two main contributions:thefirst is a more quantifiable trajectory model for self-driving articulated vehicles,which provides the opportunity to adapt vehicle and scene changes.The second involves designing a feedback linearization controller,combined with a multi-objective decision-making mode,to improve the comprehensive performance of intelligent vehicles.This study provides a valuable reference to develop advanced driving assistant system and intelligent control systems for self-driving articulated vehicles.展开更多
基金Sponsored by the National High Technology Research and Development Program:Underground Mining Intelligent Truck(Grant No.2011AA060404)
文摘The requirements of vehicle dynamic stability control are higher than ever as the significant increase of electric drive articulated vehicle speed. According to the construction features of articulated dumping truck and nonlinear characteristics of moving vehicles,nonlinear observer of vehicle status is designed to strength robustness of dynamic control system in this paper. A 4-degree-of-freedom nonlinear dynamic model of articulated electric drive vehicle is built as reference model to estimate the state of the articulated vehicle. And by adopting Unscented Kalman Filter( UKF) algorithm,a series of state parameters such as longitudinal velocities of front and rear frames,yaw rate and side-slip angle are estimated. During the test of 60 t articulated electric drive vehicle,2 inertial navigation modules are installed in the front frame and rear frame respectively and the speed of each electric drive wheel is obtained simultaneously. As the test results suggest,in various working conditions,the algorithm based on UKF is able to accurately estimate the state parameters of articulated vehicle with the estimated error less than 5%. The proposed method is justified to be the theoretical basis and application guidance for articulated vehicle stability control.
基金the Fundamental Research Funds for the Central Universities of China(No.FRF-TP-15-023A1)the National Key R&D Program Project(Nos.2016YFC0802905 and 2018YFC0604403)
文摘This paper designs a novel controller to improve the path-tracking performance of articulated dump truck(ADT). By combining linear quadratic regulator(LQR) with genetic algorithm(GA), the designed controller is used to control linear and angular velocities on the midpoint of the front frame. The novel controller based on the error dynamics model is eventually realized to track the path high-precisely with constant speed. The results of simulation and experiment show that the LQR-GA controller has a better tracking performance than the existing methods under a low speed of 3 m/s. In this paper, kinematics model and simulation control models based on co-simulation of ADAMS and Matlab/Simulink are established to verify the proposed strategy. In addition, a real vehicle experiment is designed to further more correctness of the conclusion. With the proposed controller and considering the steering model in the simulation, the control performance is improved and matches the actual situation better. The research results contribute to the development of automation of ADT.
文摘Purpose–This study aims to develop an automatic lane-change mechanism on highways for self-driving articulated trucks to improve traffic safety.Design/methodology/approach–The authors proposed a novel safety lane-change path planning and tracking control method for articulated vehicles.A double-Gaussian distribution was introduced to deduce the lane-change trajectories of tractor and trailer coupling characteristics of intelligent vehicles and roads.With different steering and braking maneuvers,minimum safe distances were modeled and calculated.Considering safety and ergonomics,the authors invested multilevel self-driving modes that serve as the basis of decision-making for vehicle lane-change.Furthermore,a combined controller was designed by feedback linearization and single-point preview optimization to ensure the path tracking and robust stability.Specialized hardware in the loop simulation platform was built to verify the effectiveness of the designed method.Findings–The numerical simulation results demonstrated the path-planning model feasibility and controller-combined decision mechanism effectiveness to self-driving trucks.The proposed trajectory model could provide safety lane-change path planning,and the designed controller could ensure good tracking and robust stability for the closed-loop nonlinear system.Originality/value–This is a fundamental research of intelligent local path planning and automatic control for articulated vehicles.There are two main contributions:thefirst is a more quantifiable trajectory model for self-driving articulated vehicles,which provides the opportunity to adapt vehicle and scene changes.The second involves designing a feedback linearization controller,combined with a multi-objective decision-making mode,to improve the comprehensive performance of intelligent vehicles.This study provides a valuable reference to develop advanced driving assistant system and intelligent control systems for self-driving articulated vehicles.
