In order to improve the maintenance efficiency,extend the use time,ensure that the exhaust emission meets the standard,forthe 830E truck heating bucket exhaust pipe design defects,the current single smoke exhaust syst...In order to improve the maintenance efficiency,extend the use time,ensure that the exhaust emission meets the standard,forthe 830E truck heating bucket exhaust pipe design defects,the current single smoke exhaust system is transformed into atime period,convertible smoke exhaust system.After the transformation,it can not only realize the side row to prevent direct corrosion of the box bucket in summer,but also realize the heating of the box bucket at low temperature in winter to prevent snow and ice and frozen blocks from sticking to the box bucket and the materials transported.After the transformation can save a lot of manpower,material resources,financial resources,improve the service life.展开更多
The volumetric flow rate of smoke generated from the fire in large space often reaches to hundreds of thousands CMH because of extended floor height and as it’s more difficult to isolate the smoke to the limited area...The volumetric flow rate of smoke generated from the fire in large space often reaches to hundreds of thousands CMH because of extended floor height and as it’s more difficult to isolate the smoke to the limited area, comparing to normal-scale building, design and operation of effective smoke control system for large space is more than important. In this study, with the analysis model for such a large space as exhibition hall or conference room in conventional center, design of mechanical smoke exhaust system was conducted based on currently-available design standard which was then followed by numerical analysis of the design using 3D numerical analysis method. For conference room at 2.0 MW heat release rate, 99,173 CMH flow rate is required, if smoke layer is maintained at 60% of the floor height and for exhibition hall at 8.8 MW with 80% of floor height, flow rate required is 219,802 CMH, which are incorporated into the design. In view of 3D numerical analysis, accuracy of the design according to algebraic expression is sufficient.展开更多
In houses and general buildings of environment where smoke control equipment is not installed, or its operation is difficult, there is a need to develop and utilize a portable smoke exhaust fan that can perform emerge...In houses and general buildings of environment where smoke control equipment is not installed, or its operation is difficult, there is a need to develop and utilize a portable smoke exhaust fan that can perform emergency ventilation in case of fire suppression and rescue operations. As a part of the development process for portable smoke exhaust fans, a numerical analysis model of the portable smoke exhaust fan was derived from the building in which a fire occurred, and an analysis on the smoke and toxic gas exhaust effects was performed in this study. The numerical analysis results showed that under a condition where the height of an opening is less than 1.0 m after fire source disappears in a situation where the smoke exhaust fan does not operate, smoke does not come out well, and thus the density of smoke within the target area does not drop significantly. On the other hand, if the smoke exhaust fan operates after the fire source disappears, smoke is directly exhausted to the outside due to the operation of the smoke exhaust fan, and the smoke density within the space drops sharply in all opening height conditions, thereby getting close to zero.展开更多
The Beijing Jingchu Industry General Co. is a famous enterprise producing kitchen utensils and household electrical appliances. The Jingchu brand energysaving oil and smoke exhauster produced by the company is made of...The Beijing Jingchu Industry General Co. is a famous enterprise producing kitchen utensils and household electrical appliances. The Jingchu brand energysaving oil and smoke exhauster produced by the company is made of imported materials with overseas advanced technology for production and measurement. All indexes have reached the domestic advanced level. The exhauster is equipped with展开更多
基金2022 Liaoning Natural Science Foundation Plan(Yingkou Joint Fund)Damping damping Design and Optimization of New Bore Head Transmission Structure(Fund No.:2022-YKLH-17)In 2023,the key scientific research project of Yingkou Institute of Technology is the Design and Optimization of Smoke Drainage Pipe for New Mining Truck(Fund No.:ZDIL202306)2021 Natural Science Foundation of Liaoning Province(Yingkou Joint Fund)Research on Dynamic Characteristics of Damped Dynamic Reduction Vertical Holack(Fund No.:2021-YKLH-08).
文摘In order to improve the maintenance efficiency,extend the use time,ensure that the exhaust emission meets the standard,forthe 830E truck heating bucket exhaust pipe design defects,the current single smoke exhaust system is transformed into atime period,convertible smoke exhaust system.After the transformation,it can not only realize the side row to prevent direct corrosion of the box bucket in summer,but also realize the heating of the box bucket at low temperature in winter to prevent snow and ice and frozen blocks from sticking to the box bucket and the materials transported.After the transformation can save a lot of manpower,material resources,financial resources,improve the service life.
文摘The volumetric flow rate of smoke generated from the fire in large space often reaches to hundreds of thousands CMH because of extended floor height and as it’s more difficult to isolate the smoke to the limited area, comparing to normal-scale building, design and operation of effective smoke control system for large space is more than important. In this study, with the analysis model for such a large space as exhibition hall or conference room in conventional center, design of mechanical smoke exhaust system was conducted based on currently-available design standard which was then followed by numerical analysis of the design using 3D numerical analysis method. For conference room at 2.0 MW heat release rate, 99,173 CMH flow rate is required, if smoke layer is maintained at 60% of the floor height and for exhibition hall at 8.8 MW with 80% of floor height, flow rate required is 219,802 CMH, which are incorporated into the design. In view of 3D numerical analysis, accuracy of the design according to algebraic expression is sufficient.
文摘In houses and general buildings of environment where smoke control equipment is not installed, or its operation is difficult, there is a need to develop and utilize a portable smoke exhaust fan that can perform emergency ventilation in case of fire suppression and rescue operations. As a part of the development process for portable smoke exhaust fans, a numerical analysis model of the portable smoke exhaust fan was derived from the building in which a fire occurred, and an analysis on the smoke and toxic gas exhaust effects was performed in this study. The numerical analysis results showed that under a condition where the height of an opening is less than 1.0 m after fire source disappears in a situation where the smoke exhaust fan does not operate, smoke does not come out well, and thus the density of smoke within the target area does not drop significantly. On the other hand, if the smoke exhaust fan operates after the fire source disappears, smoke is directly exhausted to the outside due to the operation of the smoke exhaust fan, and the smoke density within the space drops sharply in all opening height conditions, thereby getting close to zero.
文摘The Beijing Jingchu Industry General Co. is a famous enterprise producing kitchen utensils and household electrical appliances. The Jingchu brand energysaving oil and smoke exhauster produced by the company is made of imported materials with overseas advanced technology for production and measurement. All indexes have reached the domestic advanced level. The exhauster is equipped with
