In this study,the influence of Ce-and Ce-La-substitution for Nd in Nd-Fe-B magnets on their magnetic and microstructural changes in the course of the hot-deformation process was investigated to gain insight into furth...In this study,the influence of Ce-and Ce-La-substitution for Nd in Nd-Fe-B magnets on their magnetic and microstructural changes in the course of the hot-deformation process was investigated to gain insight into further reducing the Nd content in fine-grained Nd-Fe-B hot-deformed magnets.We found that the[001]texture and microstructure of the RE-rich grain boundary phases,which are the factors that de-termine the remanence and coercivity of hot-deformed magnets,were deteriorated by the Ce-and Ce-La-substitution.This is because the volume fraction of the RE-rich liquid formed in the grain boundaries during the hot-press and hot-deformation decreased due to the Ce-and Ce-La-substitution,thereby in-creasing the friction between the 2:14:1 grains while the c-axes of grains were aligned by grain rotation and decreasing the RE concentration of grain boundary phases.In particular,the Ce-La-co-substitution further prevented the liquid formation within the grain boundaries of the magnets during hot-press and hot-deformation because the wettability of the RE-rich liquid on the 2:14:1 grains became poor when La was substituted for Nd in the 2:14:1 grains.These results indicate that there is room for further im-provement in both the remanence and coercivity of the Ce-and Ce-La-substituted magnets by intro-ducing additional liquid into the grain boundaries prior to hot-press and hot-deformation.By applying the Nd-Cu infiltration process to the melt-spun ribbons(intermediate infiltration,I-infiltration),both the remanence and coercivity of the Nd-saving(Nd 0.7 Ce 0.3)-Fe-B and(Nd 0.7 Ce 0.225 La 0.075)-Fe-B hot-deformed magnets were successfully improved.展开更多
In isothermal spheroidizing process,the spheroidization and growth of the carbide formed in hot-deformed high-carbon chromium cast steel at high temperature were investigated.The results showed that the spheroidizing ...In isothermal spheroidizing process,the spheroidization and growth of the carbide formed in hot-deformed high-carbon chromium cast steel at high temperature were investigated.The results showed that the spheroidizing growth of carbide proceeds in such a way that the bigger carbide particles swallow the smaller ones,and the short rhabdoid carbides dissolve and are spheroidized by itself.When the samples were held at 720℃ for more than 3 h,the spheroidization is not obvious.The feature of the process is the size increment and the amount decrement of carbide particles.The empirical equation for growth rate of carbides was obtained.The volume fraction of carbides keeps constant.The growth process agrees well with Ostwald Ripening Law.展开更多
On the thermodynamics basis of regular solution sub-lattice model and soperelement model, kinetics basis of Cahn's transformation kinetics theory, and according to Scheil's additivity rule and eoperimental res...On the thermodynamics basis of regular solution sub-lattice model and soperelement model, kinetics basis of Cahn's transformation kinetics theory, and according to Scheil's additivity rule and eoperimental results obtained by thermal dilation method,a prediction model of transformations from hot-deformed austenite to ferrite, pearlite and bainite in low alloy steels, which could be applied to continuoas cooling process, is developed. The calculated transformed junctions of each phase based on laboratory controlled rolling and controlled cooling conditions in a low alloy steel are in reasonable agreement with the measured ones.展开更多
On the basis of superelement model, Cahn’s transformation kinetics theory and Scheil’s additivity rule, the CCT diagrams and transformation kinetics in low carbon steel were predicted considering both undeformed and...On the basis of superelement model, Cahn’s transformation kinetics theory and Scheil’s additivity rule, the CCT diagrams and transformation kinetics in low carbon steel were predicted considering both undeformed and deformed conditions. The influence of deformation on phase equilibria and transformation incubation period was evaluated quantitatively. The recrystallization kinetics and the evolution of dislocation density were calculated during continuous cooling. The results show deformation considerably shortens transformation incubation period, accelerates transformation kinetics and makes CCT curve shift leftwards. The calculated CCT diagrams and the volume fraction of each phase are in good agreement with measurements.展开更多
The structure change of α2/γ interface in a Ti-45Al-10Nb alloy induced by hot deformation was investigated by conventional and high-resolution transmission eIectron microscopy. Two types of hot deformation induced s...The structure change of α2/γ interface in a Ti-45Al-10Nb alloy induced by hot deformation was investigated by conventional and high-resolution transmission eIectron microscopy. Two types of hot deformation induced special α2/γ intedeces, coherent intedeces with high density of ledges and semi-coherent α2/γ intedeces were found to be due to the absorption of mobile dislocations into the α2/γ inteface. For the misoriented semi-coherent α2/γ interfaces, the densities of dislocation ledges increase with the misoriented angle between (111)γ and (0001)α2 planes, and 1/3[111] Frank partial dislocations were involved in the dislocation ledges. Formation mechanism of these deformation-induced α2/γ interfaces was discussed to be related to the role of α2/γ interface5 adjusting the deformation as a dislocation sink absorbing the slipping dislocations in the γ phase展开更多
It is still a challenge to simultaneously enhance coercivity(H_(cj))and remanence(J_(r))of hot-deformed Nd-Fe-B magnet due to the coercivity-remanence trade-off dilemma.Here,we achieved this balance between H_(cj)and ...It is still a challenge to simultaneously enhance coercivity(H_(cj))and remanence(J_(r))of hot-deformed Nd-Fe-B magnet due to the coercivity-remanence trade-off dilemma.Here,we achieved this balance between H_(cj)and Jr by flake Cu powder assisted DyF_(3)interflake addition.The Hcj increases from 1218 to 1496 kA/m and Jr increases from 1.32 to 1.34 T compared with the original magnet.Results show that the width of coarse grain layers reduces because of the introduction of flake Cu,which increases the contact areas of the adjacent grains at ribbon interfaces and suppresses the excessive growth of grains.The stronger degree of texture and higher density compared with the original magnet should take the responsibility for the increase of J_(r).Additionally,the aggregation regions of rare earth rich(RE-rich)phase reduce and the betterment of the microstructure is another reason for the enhancement of Jr in the flake Cu aided DyF_(3)hot-deformed magnet.This strategy of using flake powder additives provides a promising method for optimizing microstructure and enhancing magnetic properties of hot-deformed Nd-Fe-B magnets.展开更多
基金supported by the Fundamental Research Pro-gram of the Korea Institute of Material Science(No.PNK8310).
文摘In this study,the influence of Ce-and Ce-La-substitution for Nd in Nd-Fe-B magnets on their magnetic and microstructural changes in the course of the hot-deformation process was investigated to gain insight into further reducing the Nd content in fine-grained Nd-Fe-B hot-deformed magnets.We found that the[001]texture and microstructure of the RE-rich grain boundary phases,which are the factors that de-termine the remanence and coercivity of hot-deformed magnets,were deteriorated by the Ce-and Ce-La-substitution.This is because the volume fraction of the RE-rich liquid formed in the grain boundaries during the hot-press and hot-deformation decreased due to the Ce-and Ce-La-substitution,thereby in-creasing the friction between the 2:14:1 grains while the c-axes of grains were aligned by grain rotation and decreasing the RE concentration of grain boundary phases.In particular,the Ce-La-co-substitution further prevented the liquid formation within the grain boundaries of the magnets during hot-press and hot-deformation because the wettability of the RE-rich liquid on the 2:14:1 grains became poor when La was substituted for Nd in the 2:14:1 grains.These results indicate that there is room for further im-provement in both the remanence and coercivity of the Ce-and Ce-La-substituted magnets by intro-ducing additional liquid into the grain boundaries prior to hot-press and hot-deformation.By applying the Nd-Cu infiltration process to the melt-spun ribbons(intermediate infiltration,I-infiltration),both the remanence and coercivity of the Nd-saving(Nd 0.7 Ce 0.3)-Fe-B and(Nd 0.7 Ce 0.225 La 0.075)-Fe-B hot-deformed magnets were successfully improved.
基金Item Sponsored by Guiding Programme of Science and Technology Research of Hebei of China(94122123)
文摘In isothermal spheroidizing process,the spheroidization and growth of the carbide formed in hot-deformed high-carbon chromium cast steel at high temperature were investigated.The results showed that the spheroidizing growth of carbide proceeds in such a way that the bigger carbide particles swallow the smaller ones,and the short rhabdoid carbides dissolve and are spheroidized by itself.When the samples were held at 720℃ for more than 3 h,the spheroidization is not obvious.The feature of the process is the size increment and the amount decrement of carbide particles.The empirical equation for growth rate of carbides was obtained.The volume fraction of carbides keeps constant.The growth process agrees well with Ostwald Ripening Law.
文摘On the thermodynamics basis of regular solution sub-lattice model and soperelement model, kinetics basis of Cahn's transformation kinetics theory, and according to Scheil's additivity rule and eoperimental results obtained by thermal dilation method,a prediction model of transformations from hot-deformed austenite to ferrite, pearlite and bainite in low alloy steels, which could be applied to continuoas cooling process, is developed. The calculated transformed junctions of each phase based on laboratory controlled rolling and controlled cooling conditions in a low alloy steel are in reasonable agreement with the measured ones.
基金National Key Basic Research and Development Programme of China(No.G199806150).
文摘On the basis of superelement model, Cahn’s transformation kinetics theory and Scheil’s additivity rule, the CCT diagrams and transformation kinetics in low carbon steel were predicted considering both undeformed and deformed conditions. The influence of deformation on phase equilibria and transformation incubation period was evaluated quantitatively. The recrystallization kinetics and the evolution of dislocation density were calculated during continuous cooling. The results show deformation considerably shortens transformation incubation period, accelerates transformation kinetics and makes CCT curve shift leftwards. The calculated CCT diagrams and the volume fraction of each phase are in good agreement with measurements.
文摘The structure change of α2/γ interface in a Ti-45Al-10Nb alloy induced by hot deformation was investigated by conventional and high-resolution transmission eIectron microscopy. Two types of hot deformation induced special α2/γ intedeces, coherent intedeces with high density of ledges and semi-coherent α2/γ intedeces were found to be due to the absorption of mobile dislocations into the α2/γ inteface. For the misoriented semi-coherent α2/γ interfaces, the densities of dislocation ledges increase with the misoriented angle between (111)γ and (0001)α2 planes, and 1/3[111] Frank partial dislocations were involved in the dislocation ledges. Formation mechanism of these deformation-induced α2/γ interfaces was discussed to be related to the role of α2/γ interface5 adjusting the deformation as a dislocation sink absorbing the slipping dislocations in the γ phase
基金Project supported by the National Key Research and Development Program of China(2022YFB3505201,2022YFB3505400)the National Natural Science Foundation of China(52261034)the Natural Science Foundation of Jiangxi Province(20224BAB204015)。
文摘It is still a challenge to simultaneously enhance coercivity(H_(cj))and remanence(J_(r))of hot-deformed Nd-Fe-B magnet due to the coercivity-remanence trade-off dilemma.Here,we achieved this balance between H_(cj)and Jr by flake Cu powder assisted DyF_(3)interflake addition.The Hcj increases from 1218 to 1496 kA/m and Jr increases from 1.32 to 1.34 T compared with the original magnet.Results show that the width of coarse grain layers reduces because of the introduction of flake Cu,which increases the contact areas of the adjacent grains at ribbon interfaces and suppresses the excessive growth of grains.The stronger degree of texture and higher density compared with the original magnet should take the responsibility for the increase of J_(r).Additionally,the aggregation regions of rare earth rich(RE-rich)phase reduce and the betterment of the microstructure is another reason for the enhancement of Jr in the flake Cu aided DyF_(3)hot-deformed magnet.This strategy of using flake powder additives provides a promising method for optimizing microstructure and enhancing magnetic properties of hot-deformed Nd-Fe-B magnets.
