Coherent gradient sensing （CGS） method can be used to measure the slope of a reflective surface, and has the merits of full-field, non-contact, and real-time measurement. In this study, the thermal stress field of t...Coherent gradient sensing （CGS） method can be used to measure the slope of a reflective surface, and has the merits of full-field, non-contact, and real-time measurement. In this study, the thermal stress field of thermal barrier coating （TBC） structures is measured by CGS method. Two kinds of powders were sprayed onto Ni-based alloy using a plasma spraying method to obtain two groups of film-substrate specimens. The specimens were then heated with an oxy-acetylene flame. The resulting thermal mismatch between the film and substrate led to out-of-plane deformation of the specimen. The deformation was measured by the reflective CGS method and the thermal stress field of the structure was obtained through calibration with the help of finite element analysis. Both the experiment and numerical results showed that the thermal stress field of TBC structures can be successfully measured by CGS method.展开更多
In this letter,a humidity sensor is demonstrated by applying a whispering gallery mode(WGM)from a microsphere resonator onto the ZnO nanorods coated glass surface.The diameter of the microsphere was 234μm and the gla...In this letter,a humidity sensor is demonstrated by applying a whispering gallery mode(WGM)from a microsphere resonator onto the ZnO nanorods coated glass surface.The diameter of the microsphere was 234μm and the glass surface was coated with ZnO nanorods using the hydrothermal method at growth duration of 12 h.A significant response to humidity level ranging from 35%RH to 85%RH has been observed with the sensitivity of 0.0142 nm/%RH.The proposed humidity sensor has successfully employed to enhance interaction between the whispering gallery mode evanescent and surrounds analyte with the assistance of ZnO nanorods coated glass.展开更多
基金financial support from the National Natural Science Foundation of China(11672153,11232008,and11227801)
文摘Coherent gradient sensing （CGS） method can be used to measure the slope of a reflective surface, and has the merits of full-field, non-contact, and real-time measurement. In this study, the thermal stress field of thermal barrier coating （TBC） structures is measured by CGS method. Two kinds of powders were sprayed onto Ni-based alloy using a plasma spraying method to obtain two groups of film-substrate specimens. The specimens were then heated with an oxy-acetylene flame. The resulting thermal mismatch between the film and substrate led to out-of-plane deformation of the specimen. The deformation was measured by the reflective CGS method and the thermal stress field of the structure was obtained through calibration with the help of finite element analysis. Both the experiment and numerical results showed that the thermal stress field of TBC structures can be successfully measured by CGS method.
基金supported by the National Natural Science Foundation of China(Nos.U1304608 and 61774053)the Project of Henan Provincial Department of Science and Technology(No.182102410047)the Program of Henan Polytechnic University(No.B2014-020)。
文摘In this letter,a humidity sensor is demonstrated by applying a whispering gallery mode(WGM)from a microsphere resonator onto the ZnO nanorods coated glass surface.The diameter of the microsphere was 234μm and the glass surface was coated with ZnO nanorods using the hydrothermal method at growth duration of 12 h.A significant response to humidity level ranging from 35%RH to 85%RH has been observed with the sensitivity of 0.0142 nm/%RH.The proposed humidity sensor has successfully employed to enhance interaction between the whispering gallery mode evanescent and surrounds analyte with the assistance of ZnO nanorods coated glass.
