Research on ultrasonic detection of complex surfaces

Parts of complex surface are widely used now in many fields, and their detection has caused much concern. In China many manufactories still carry on the traditional way of manual detection, which requires highly skilled personnel and efficiency is low. Some large manufactories have imported auto-detecting equipments, which require CAD data on the parts, or just divide the surface into several approximate planes for automatic detection. Phased-array system is seldom used, and the cost is high. Besides, most of the systems have not considered the automatic sensitivity compensation of parts with varying thickness. To improve the detection quality and efficiency of nondestructive test (NDT) of parts of complex surface, this paper puts forward an integrated ultrasonic NDT system characterized by: (1) Use of ultrasonic measurement and reverse of curved surface to solve the CAD data problem; (2) Use of an automatic sensitivity compensation algorithm (based on the part’s modelling information obtained in surface reverse) to fit the variety of the thickness; (3) Use of template matching and pseudo-color imaging to improve the quality of detection results. The system features integration of low cost mature technologies, and is suitable for detection of various parts of different complex surfaces in medium-and-small enterprises. The test results showed that the system can automatically detect parts of complex surface successfully, and that the inspection result is good and reliable.

High-speed all-optic optical coherence tomography and photoacoustic microscopy dual-modal system for microcirculation evaluation

We propose a high-speed all-optic dual-modal system that integrates spectral domain optical coherence tomography and photoacoustic microscopy(PAM).A 3*3 coupler-based interfer-ometer is used to remotely detect the surface vibration caused by photoacoustic(PA)waves.Three outputs of the interferometer are acquired simultaneously with a multi-channel data ac-quisition card.One channel data with the highest PA signal detection sensitivity is selected for sensitivity compensation.Experiment on the phantom demonstrates that the proposed method can sucessfully compensate for the loss of intensity caused by sensitivity variation.The imaging speed of the PAM is improved compared to our previous system.The total time to image a sample with 256×256 pixels is~20s.Using the proposed system,the microvasculature in the mouse auricle is visualized and the blood flow state is accessed.

Temperature characteristics research of SOI pressure sensor based on asymmetric base region transistor

Based on the asymmetric base region transistor, a pressure sensor with temperature compensation circuit is proposed in this paper. The pressure sensitive structure of the proposed sensor is constructed by a C-type silicon cup and a Wheatstone bridge with four piezoresistors（R_1, R_2, R_3 and R_4/locating on the edge of a square silicon membrane. The chip was designed and fabricated on a silicon on insulator（SOI） wafer by micro electromechanical system（MEMS） technology and bipolar transistor process. When the supply voltage is 5.0 V, the corresponding temperature coefficient of the sensitivity（TCS） for the sensor before and after temperature compensation are -1862 and -1067 ppm/℃, respectively. Through varying the ratio of the base region resistances r_1 and r_2, the TCS for the sensor with the compensation circuit is -127 ppm/℃. It is possible to use this compensation circuit to improve the temperature characteristics of the pressure sensor.