Analysis of Frequency Characteristics and Sensitivity of Compliant Mechanisms

Based on a modified pseudo-rigid-body model,the frequency characteristics and sensitivity of the large-deformation compliant mechanism are studied.Firstly,the pseudo-rigid-body model under the static and kinetic conditions is modified to enable the modified pseudo-rigid-body model to be more suitable for the dynamic analysis of the compliant mechanism.Subsequently,based on the modified pseudo-rigid-body model,the dynamic equations of the ordinary compliant four-bar mechanism are established using the analytical mechanics.Finally,in combination with the finite element analysis software ANSYS,the frequency characteristics and sensitivity of the compliant mechanism are analyzed by taking the compliant parallel-guiding mechanism and the compliant bistable mechanism as examples.From the simulation results,the dynamic characteristics of compliant mechanism are relatively sensitive to the structure size,section parameter,and characteristic parameter of material on mechanisms.The results could provide great theoretical significance and application values for the structural optimization of compliant mechanisms,the improvement of their dynamic properties and the expansion of their application range.

ON SWELLING CHARACTERISTICS AND MECHANISM OF TEMPERATURE SENSITIVE HYDROGELS

A series of N-substituted acrylamide monomers and the temperature sensitive hydrogels of their copolymer with N, N'-methylene-bis -acrylamide (Bis) have been synthesized. The effects of monomer structures, composition of the initial monomer mixture, polymerization temperature, the extent of ionization of the network and the presence of acid, base, salt or organic compound on the formation and the swelling characteristics of the temperature sensitive hydrogels have been systematically studied. The mechanism of the temperature sensitive phase transformation of the hydrogels was also investigated.

Preparation and characterization of HMX/EVA/hBNNSs microcomposites with improved thermal stability and reduced sensitivity

Hexagonal boron nitride nanosheets(HBNNSs)have huge potential in the field of coating materials owing to their remarkable chemical stability,mechanical strength and thermal conductivity.Thin-layer hBNNSs were obtained by a liquid-phase exfoliation of h-BN powders and incorporated into EVA coatings for improving the safety performance of 1,3,5,7-tetranitro-1,3,5,7-tetrazocane(HMX).HBNNSs and ethylene-vinyl acetate copolymer(EVA)were introduced to HMX by a solvent-slurry process.For comparison,the HMX/EVA and HMX/EVA/graphene(HMX/EVA/G)composites were also prepared by a similar process.The morphology,crystal form,surface element distribution,thermal decomposition property and impact sensitivity of HMX/EVA/hBNNSs composites were contrastively investigated.Results showed that as prepared HMX/EVA/hBNNSs composites were well coated with hBNNSs and EVA,and exhibited better thermal stability and lower impact sensitivity than that of HMX/EVA and HMX/EVA/G composites,suggesting superior performance of desensitization of hBNNSs in explosives.

Improved Reliability Analysis Method Based on the Failure Assessment Diagram

With the uncertainties related to operating conditions,in-service non-destructive testing（NDT） measurements and material properties considered in the structural integrity assessment,probabilistic analysis based on the failure assessment diagram（FAD） approach has recently become an important concern.However,the point density revealing the probabilistic distribution characteristics of the assessment points is usually ignored.To obtain more detailed and direct knowledge from the reliability analysis,an improved probabilistic fracture mechanics（PFM） assessment method is proposed.By integrating 2D kernel density estimation（KDE） technology into the traditional probabilistic assessment,the probabilistic density of the randomly distributed assessment points is visualized in the assessment diagram.Moreover,a modified interval sensitivity analysis is implemented and compared with probabilistic sensitivity analysis.The improved reliability analysis method is applied to the assessment of a high pressure pipe containing an axial internal semi-elliptical surface crack.The results indicate that these two methods can give consistent sensitivities of input parameters,but the interval sensitivity analysis is computationally more efficient.Meanwhile,the point density distribution and its contour are plotted in the FAD,thereby better revealing the characteristics of PFM assessment.This study provides a powerful tool for the reliability analysis of critical structures.

Microstructure and Mechanical Performance of Cu-SnO_2-rGO based Composites Prepared by Plasma Activated Sintering

A novel chemical technique combined with unique plasma activated sintering（PAS） was utilized to prepare consolidated copper matrix composites（CMCs） by adding Cu-SnO2-rGO layered micro powders as reinforced fillers into Cu matrix. The repeating Cu-SnO2-rGO structure was composed of inner dispersed reduced graphene oxide（r GO）, SnO2 as intermedia and outer Cu coating. SnO2 was introduced to the surface of rGO sheets in order to prevent the graphene aggregation with SnO2 serving as spacer and to provide enough active sites for subsequent Cu deposition. This process can guarantee rGO sheets to suffi ciently disperse and Cu nanoparticles to tightly and uniformly anchor on each layer of rGO by means of the SnO2 active sites as well as strictly control the reduction speed of Cu^2＋. The complete cover of Cu nanoparticles on rGO sheets thoroughly avoids direct contact among rGO layers. Hence, the repeating structure can simultaneously solve the wettability problem between rGO and Cu matrix as well as improve the bonding strength between rGO and Cu matrix at the well-bonded Cu-SnO2-rGO interface. The isolated rGO can effectively hinder the glide of dislocation at Cu-rGO interface and support the applied loads. Finally, the compressive strength of CMCs was enhanced when the strengthening effi ciency reached up to 41.

Strain-rate Sensitivity of Aluminum 2024-T6/TiB_2 Composites and Aluminum 2024-T6

Strain-rate sensitivities of 55vol%-65vol% aluminum 2024-T6/TiB2 composites and the corresponding aluminum 2024-T6 matrix were investigated using split Hopkinson pressure bar method. The experimental results showed that 55vol%-65vol% aluminum 2024-T6/TiB2 composites exhibited significant strain-rate sensitivities, which were three times higher than the strain-rate sensitivity of the aluminum 2024-T6 matrix. The strain-rate sensitivity of the aluminum 2024-T6 matrix composites rose obviously with increasing reinforcement content（up to 60%）, which agreed with that from the previous researches. But it decreased as the ceramic reinforcement content reached 65%. After high strain rates compression, a large number of dislocations and micro-cracks were found inside the matrix and the Ti B2 particles, respectively. These micro-cracks can accelerate the brittle fracture of the composites. The aluminum 2024-T6/Ti B2 composites showed various fracture characteristics and shear instability was the predominant failure mechanism under dynamic loading.

Diversiform gas sensors based on two-dimensional nanomaterials

Two-dimensional(2D)nanomaterials have been widely used in gas sensing due to their large specific surface area,high surface reactivity,and excellent gas adsorption properties.This paper reviews the typical synthesis methods of various types of 2D nanomaterials and summarizes the recent progress in gas sensors based on 2D materials,such as noble metal nanoparticles(NPs),metal oxides(MOS),conductive polymers,other new 2D materials.The methods of doping,modification,and photoexcitation can effectively improve the gas-sensing properties of 2D materials.The sensitive mechanisms of heterojunction,Schottky junction,and photoexcitation in 2D material sensors are discussed in detail.This paper discusses the application prospects of 2D materials in wearable gas sensors,food safety,and self-powered sensing,and provides ideas for further applications in environmental quality monitoring and disease diagnosis.In addition,the opportunities and challenges for gas sensors based on 2D materials are also discussed.

Optimal measurement design for parameter identification in mechanized tunneling

When performing shallow tunnel construction,settlements on the ground surface often cannot be prevented.Anticipating these sur-face displacements is only possible with profound knowledge of the constitutive parameters of the surrounding soil.Performing inverse analysis on the basis of in situ settlement data is an effcient method for obtaining such information.However,during this process,con-sidering which measurement arrangement can provide the most reliable results is generally neglected.This aspect is addressed in this study by applying the so-called“optimal experimental design”to the mechanized tunnelingfield.A global sensitivity analysis(GSA)isfirstly performed to determine the most relevant model parameters to be identified via back analysis,by employing the considered numerical model and experimental data.Furthermore,the GSA results are utilized to determine where and when measurements should be performed to minimize uncertainty in the identified constitutive parameters.The optimal experimental design(OED)concept is fur-ther applied to evaluate the observation set-up effciency for damage mitigation measures within a representative synthetic example of a tunneling project passing beneath an existing building.Parameter identification based on synthetic noisy experiments is performed to validate the presented method for optimal experimental design.Thus,the soil stiffness and strength parameters are identified according to both an intuitive and the elaborated method,employing the proposed OED strategy and experimental designs,making it possible to assess the feasibility of the OED results.